NAME
Perl::Tidy - Parses and beautifies perl source
SYNOPSIS
use Perl::Tidy;
my $error_flag = Perl::Tidy::perltidy(
source => $source,
destination => $destination,
stderr => $stderr,
argv => $argv,
perltidyrc => $perltidyrc,
logfile => $logfile,
errorfile => $errorfile,
formatter => $formatter, # callback object (see below)
dump_options => $dump_options,
dump_options_type => $dump_options_type,
prefilter => $prefilter_coderef,
postfilter => $postfilter_coderef,
);DESCRIPTION
This module makes the functionality of the perltidy utility available to perl scripts. Any or all of the input parameters may be omitted, in which case the @ARGV array will be used to provide input parameters as described in the perltidy(1) man page.
For example, the perltidy script is basically just this:
use Perl::Tidy;
Perl::Tidy::perltidy();The call to perltidy returns a scalar $error_flag which is TRUE if an error caused premature termination, and FALSE if the process ran to normal completion. Additional discuss of errors is contained below in the "ERROR HANDLING" section.
The module accepts input and output streams by a variety of methods. The following list of parameters may be any of the following: a filename, an ARRAY reference, a SCALAR reference, or an object with either a getline or print method, as appropriate.
source - the source of the script to be formatted
destination - the destination of the formatted output
stderr - standard error output
perltidyrc - the .perltidyrc file
logfile - the .LOG file stream, if any
errorfile - the .ERR file stream, if any
dump_options - ref to a hash to receive parameters (see below),
dump_options_type - controls contents of dump_options
dump_getopt_flags - ref to a hash to receive Getopt flags
dump_options_category - ref to a hash giving category of options
dump_abbreviations - ref to a hash giving all abbreviationsThe following chart illustrates the logic used to decide how to treat a parameter.
ref($param) $param is assumed to be:
----------- ---------------------
undef a filename
SCALAR ref to string
ARRAY ref to array
(other) object with getline (if source) or print methodIf the parameter is an object, and the object has a close method, that close method will be called at the end of the stream.
- source
-
If the source parameter is given, it defines the source of the input stream. If an input stream is defined with the source parameter then no other source filenames may be specified in the @ARGV array or argv parameter.
- destination
-
If the destination parameter is given, it will be used to define the file or memory location to receive output of perltidy.
- stderr
-
The stderr parameter allows the calling program to redirect the stream that would otherwise go to the standard error output device to any of the stream types listed above. This stream contains important warnings and errors related to the parameters passed to perltidy.
- perltidyrc
-
If the perltidyrc file is given, it will be used instead of any .perltidyrc configuration file that would otherwise be used.
- errorfile
-
The errorfile parameter allows the calling program to capture the stream that would otherwise go to either a .ERR file. This stream contains warnings or errors related to the contents of one source file or stream.
The reason that this is different from the stderr stream is that when perltidy is called to process multiple files there will be up to one .ERR file created for each file and it would be very confusing if they were combined.
However if perltidy is called to process just a single perl script then it may be more convenient to combine the errorfile stream with the stderr stream. This can be done by setting the -se parameter, in which case this parameter is ignored.
- logfile
-
The logfile parameter allows the calling program to capture the log stream. This stream is only created if requested with a -g parameter. It contains detailed diagnostic information about a script which may be useful for debugging.
- argv
-
If the argv parameter is given, it will be used instead of the @ARGV array. The argv parameter may be a string, a reference to a string, or a reference to an array. If it is a string or reference to a string, it will be parsed into an array of items just as if it were a command line string.
- dump_options
-
If the dump_options parameter is given, it must be the reference to a hash. In this case, the parameters contained in any perltidyrc configuration file will be placed in this hash and perltidy will return immediately. This is equivalent to running perltidy with --dump-options, except that the perameters are returned in a hash rather than dumped to standard output. Also, by default only the parameters in the perltidyrc file are returned, but this can be changed (see the next parameter). This parameter provides a convenient method for external programs to read a perltidyrc file. An example program using this feature, perltidyrc_dump.pl, is included in the distribution.
Any combination of the dump_ parameters may be used together.
- dump_options_type
-
This parameter is a string which can be used to control the parameters placed in the hash reference supplied by dump_options. The possible values are 'perltidyrc' (default) and 'full'. The 'full' parameter causes both the default options plus any options found in a perltidyrc file to be returned.
- dump_getopt_flags
-
If the dump_getopt_flags parameter is given, it must be the reference to a hash. This hash will receive all of the parameters that perltidy understands and flags that are passed to Getopt::Long. This parameter may be used alone or with the dump_options flag. Perltidy will exit immediately after filling this hash. See the demo program perltidyrc_dump.pl for example usage.
- dump_options_category
-
If the dump_options_category parameter is given, it must be the reference to a hash. This hash will receive a hash with keys equal to all long parameter names and values equal to the title of the corresponding section of the perltidy manual. See the demo program perltidyrc_dump.pl for example usage.
- dump_abbreviations
-
If the dump_abbreviations parameter is given, it must be the reference to a hash. This hash will receive all abbreviations used by Perl::Tidy. See the demo program perltidyrc_dump.pl for example usage.
- prefilter
-
A code reference that will be applied to the source before tidying. It is expected to take the full content as a string in its input, and output the transformed content.
- postfilter
-
A code reference that will be applied to the tidied result before outputting. It is expected to take the full content as a string in its input, and output the transformed content.
Note: A convenient way to check the function of your custom prefilter and postfilter code is to use the --notidy option, first with just the prefilter and then with both the prefilter and postfilter. See also the file filter_example.pl in the perltidy distribution.
ERROR HANDLING
Perltidy will return with an error flag indicating if the process had to be terminated early due to errors in the input parameters. This can happen for example if a parameter is misspelled or given an invalid value. The calling program should check this flag because if it is set the destination stream will be empty or incomplete and should be ignored. Error messages in the stderr stream will indicate the cause of any problem.
If the error flag is not set then perltidy ran to completion. However there may still be warning messages in the stderr stream related to control parameters, and there may be warning messages in the errorfile stream relating to possible syntax errors in the source code being tidied.
In the event of a catastrophic error for which recovery is not possible perltidy terminates by making calls to croak or confess to help the programmer localize the problem. These should normally only occur during program development.
NOTES ON FORMATTING PARAMETERS
Parameters which control formatting may be passed in several ways: in a .perltidyrc configuration file, in the perltidyrc parameter, and in the argv parameter.
The -syn (--check-syntax) flag may be used with all source and destination streams except for standard input and output. However data streams which are not associated with a filename will be copied to a temporary file before being be passed to Perl. This use of temporary files can cause somewhat confusing output from Perl.
If the -pbp style is used it will typically be necessary to also specify a -nst flag. This is necessary to turn off the -st flag contained in the -pbp parameter set which otherwise would direct the output stream to the standard output.
EXAMPLES
The following example uses string references to hold the input and output code and error streams, and illustrates checking for errors.
use Perl::Tidy;
my $source_string = <<'EOT';
my$error=Perl::Tidy::perltidy(argv=>$argv,source=>\$source_string,
destination=>\$dest_string,stderr=>\$stderr_string,
errorfile=>\$errorfile_string,);
EOT
my $dest_string;
my $stderr_string;
my $errorfile_string;
my $argv = "-npro"; # Ignore any .perltidyrc at this site
$argv .= " -pbp"; # Format according to perl best practices
$argv .= " -nst"; # Must turn off -st in case -pbp is specified
$argv .= " -se"; # -se appends the errorfile to stderr
## $argv .= " --spell-check"; # uncomment to trigger an error
print "<<RAW SOURCE>>\n$source_string\n";
my $error = Perl::Tidy::perltidy(
argv => $argv,
source => \$source_string,
destination => \$dest_string,
stderr => \$stderr_string,
errorfile => \$errorfile_string, # ignored when -se flag is set
##phasers => 'stun', # uncomment to trigger an error
);
if ($error) {
# serious error in input parameters, no tidied output
print "<<STDERR>>\n$stderr_string\n";
die "Exiting because of serious errors\n";
}
if ($dest_string) { print "<<TIDIED SOURCE>>\n$dest_string\n" }
if ($stderr_string) { print "<<STDERR>>\n$stderr_string\n" }
if ($errorfile_string) { print "<<.ERR file>>\n$errorfile_string\n" }Additional examples are given in examples section of the perltidy distribution.
Using the formatter Callback Object
The formatter parameter is an optional callback object which allows the calling program to receive tokenized lines directly from perltidy for further specialized processing. When this parameter is used, the two formatting options which are built into perltidy (beautification or html) are ignored. The following diagram illustrates the logical flow:
|-- (normal route) -> code beautification
caller->perltidy->|-- (-html flag ) -> create html
|-- (formatter given)-> callback to write_lineThis can be useful for processing perl scripts in some way. The parameter $formatter in the perltidy call,
formatter => $formatter, is an object created by the caller with a write_line method which will accept and process tokenized lines, one line per call. Here is a simple example of a write_line which merely prints the line number, the line type (as determined by perltidy), and the text of the line:
sub write_line {
# This is called from perltidy line-by-line
my $self = shift;
my $line_of_tokens = shift;
my $line_type = $line_of_tokens->{_line_type};
my $input_line_number = $line_of_tokens->{_line_number};
my $input_line = $line_of_tokens->{_line_text};
print "$input_line_number:$line_type:$input_line";
}The complete program, perllinetype, is contained in the examples section of the source distribution. As this example shows, the callback method receives a parameter $line_of_tokens, which is a reference to a hash of other useful information. This example uses these hash entries:
$line_of_tokens->{_line_number} - the line number (1,2,...)
$line_of_tokens->{_line_text} - the text of the line
$line_of_tokens->{_line_type} - the type of the line, one of:
SYSTEM - system-specific code before hash-bang line
CODE - line of perl code (including comments)
POD_START - line starting pod, such as '=head'
POD - pod documentation text
POD_END - last line of pod section, '=cut'
HERE - text of here-document
HERE_END - last line of here-doc (target word)
FORMAT - format section
FORMAT_END - last line of format section, '.'
DATA_START - __DATA__ line
DATA - unidentified text following __DATA__
END_START - __END__ line
END - unidentified text following __END__
ERROR - we are in big trouble, probably not a perl scriptMost applications will be only interested in lines of type CODE. For another example, let's write a program which checks for one of the so-called naughty matching variables &`, $&, and $', which can slow down processing. Here is a write_line, from the example program find_naughty.pl, which does that:
sub write_line {
# This is called back from perltidy line-by-line
# We're looking for $`, $&, and $'
my ( $self, $line_of_tokens ) = @_;
# pull out some stuff we might need
my $line_type = $line_of_tokens->{_line_type};
my $input_line_number = $line_of_tokens->{_line_number};
my $input_line = $line_of_tokens->{_line_text};
my $rtoken_type = $line_of_tokens->{_rtoken_type};
my $rtokens = $line_of_tokens->{_rtokens};
chomp $input_line;
# skip comments, pod, etc
return if ( $line_type ne 'CODE' );
# loop over tokens looking for $`, $&, and $'
for ( my $j = 0 ; $j < @$rtoken_type ; $j++ ) {
# we only want to examine token types 'i' (identifier)
next unless $$rtoken_type[$j] eq 'i';
# pull out the actual token text
my $token = $$rtokens[$j];
# and check it
if ( $token =~ /^\$[\`\&\']$/ ) {
print STDERR
"$input_line_number: $token\n";
}
}
}This example pulls out these tokenization variables from the $line_of_tokens hash reference:
$rtoken_type = $line_of_tokens->{_rtoken_type};
$rtokens = $line_of_tokens->{_rtokens};The variable $rtoken_type is a reference to an array of token type codes, and $rtokens is a reference to a corresponding array of token text. These are obviously only defined for lines of type CODE. Perltidy classifies tokens into types, and has a brief code for each type. You can get a complete list at any time by running perltidy from the command line with
perltidy --dump-token-typesIn the present example, we are only looking for tokens of type i (identifiers), so the for loop skips past all other types. When an identifier is found, its actual text is checked to see if it is one being sought. If so, the above write_line prints the token and its line number.
The formatter feature is relatively new in perltidy, and further documentation needs to be written to complete its description. However, several example programs have been written and can be found in the examples section of the source distribution. Probably the best way to get started is to find one of the examples which most closely matches your application and start modifying it.
For help with perltidy's peculiar way of breaking lines into tokens, you might run, from the command line,
perltidy -D filenamewhere filename is a short script of interest. This will produce filename.DEBUG with interleaved lines of text and their token types. The -D flag has been in perltidy from the beginning for this purpose. If you want to see the code which creates this file, it is write_debug_entry in Tidy.pm.
EXPORT
&perltidyVERSION
This man page documents Perl::Tidy version 20180107.
LICENSE
This package is free software; you can redistribute it and/or modify it under the terms of the "GNU General Public License".
Please refer to the file "COPYING" for details.
BUG REPORTS
A list of current bugs and issues can be found at the CPAN site
https://rt.cpan.org/Public/Dist/Display.html?Name=Perl-TidyTo report a new bug or problem, use the link on this page .
SEE ALSO
The perltidy(1) man page describes all of the features of perltidy. It can be found at http://perltidy.sourceforge.net.