Looking for help!
Name
Nasm::X86 - Generate X86 assembler code using Perl as a macro pre-processor.
Synopsis
Write and execute x64 Avx512 assembler code from perl using perl as a macro assembler. The generated code can be run under the Intel emulator to obtain execution trace and instruction counts.
Examples
Avx512 instructions
Use Avx512 instructions to perform 64 comparisons in parallel.
my $P = "2F"; # Value to test for
my $l = Rb 0; Rb $_ for 1..RegisterSize zmm0; # 0..63
Vmovdqu8 zmm0, "[$l]"; # Load data to test
PrintOutRegisterInHex zmm0;
Mov rax, "0x$P"; # Broadcast the value to be tested
Vpbroadcastb zmm1, rax;
PrintOutRegisterInHex zmm1;
for my $c(0..7) # Each possible test
{my $m = "k$c";
Vpcmpub $m, zmm1, zmm0, $c;
PrintOutRegisterInHex $m;
}
Kmovq rax, k0; # Count the number of trailing zeros in k0
Tzcnt rax, rax;
PrintOutRegisterInHex rax;
is_deeply Assemble, <<END; # Assemble and test
zmm0: 3F3E 3D3C 3B3A 3938 3736 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 0302 0100
zmm1: 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F 2F2F
k0: 0000 8000 0000 0000
k1: FFFF 0000 0000 0000
k2: FFFF 8000 0000 0000
k3: 0000 0000 0000 0000
k4: FFFF 7FFF FFFF FFFF
k5: 0000 FFFF FFFF FFFF
k6: 0000 7FFF FFFF FFFF
k7: FFFF FFFF FFFF FFFF
rax: 0000 0000 0000 002F
ENDWith the print statements removed, the Intel Emulator indicates that 26 instructions were executed:
CALL_NEAR 1
ENTER 2
JMP 1
KMOVQ 1
MOV 5
POP 1
PUSH 3
SYSCALL 1
TZCNT 1
VMOVDQU8 1
VPBROADCASTB 1
VPCMPUB 8
*total 26Process management
Start a child process and wait for it, printing out the process identifiers of each process involved:
Fork; # Fork
Test rax,rax;
IfNz # Parent
Then
{Mov rbx, rax;
WaitPid;
GetPid; # Pid of parent as seen in parent
Mov rcx,rax;
PrintOutRegisterInHex rax, rbx, rcx;
},
Else # Child
{Mov r8,rax;
GetPid; # Child pid as seen in child
Mov r9,rax;
GetPPid; # Parent pid as seen in child
Mov r10,rax;
PrintOutRegisterInHex r8, r9, r10;
};
my $r = Assemble;
# r8: 0000 0000 0000 0000 #1 Return from fork as seen by child
# r9: 0000 0000 0003 0C63 #2 Pid of child
# r10: 0000 0000 0003 0C60 #3 Pid of parent from child
# rax: 0000 0000 0003 0C63 #4 Return from fork as seen by parent
# rbx: 0000 0000 0003 0C63 #5 Wait for child pid result
# rcx: 0000 0000 0003 0C60 #6 Pid of parentRead a file
Read this file:
ReadFile(V(file, Rs($0)), (my $s = V(size)), my $a = V(address)); # Read file
$a->setReg(rax); # Address of file in memory
$s->setReg(rdi); # Length of file in memory
PrintOutMemory; # Print contents of memory to stdout
my $r = Assemble(1 => (my $f = temporaryFile)); # Assemble and execute
ok fileMd5Sum($f) eq fileMd5Sum($0); # Output contains this fileCall functions in Libc
Call C functions by naming them as external and including their library:
my $format = Rs "Hello %s\n";
my $data = Rs "World";
Extern qw(printf exit malloc strcpy); Link 'c';
CallC 'malloc', length($format)+1;
Mov r15, rax;
CallC 'strcpy', r15, $format;
CallC 'printf', r15, $data;
CallC 'exit', 0;
ok Assemble(eq => <<END);
Hello World
ENDDynamic arena
Arenas are resizeable, relocatable blocks of memory that hold other dynamic data structures. Arenas can be transferred between processes and relocated as needed as all addressing is relative to the start of the block of memory containing each arena.
Create two dynamic arenas, add some content to them, write each arena to stdout:
my $a = CreateArena;
my $b = CreateArena;
$a->q('aa');
$b->q('bb');
$a->q('AA');
$b->q('BB');
$a->q('aa');
$b->q('bb');
$a->out;
$b->out;
PrintOutNL;
is_deeply Assemble, <<END;
aaAAaabbBBbb
ENDDynamic string held in an arena
Create a dynamic string within an arena and add some content to it:
my $s = Rb(0..255);
my $A = CreateArena;
my $S = $A->CreateString;
$S->append(V(source, $s), K(size, 256));
$S->len->outNL;
$S->clear;
$S->append(V(source, $s), K(size, 16));
$S->len->outNL;
$S->dump;
ok Assemble(debug => 0, eq => <<END);
size: 0000 0000 0000 0100
size: 0000 0000 0000 0010
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0010
zmm31: 0000 0018 0000 0018 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000F 0E0D 0C0B 0A09 0807 0605 0403 0201 0010END
Dynamic array held in an arena
Create a dynamic array within an arena, push some content on to it then pop it off again:
my $N = 15;
my $A = CreateArena;
my $a = $A->CreateArray;
$a->push(V(element, $_)) for 1..$N;
K(loop, $N)->for(sub
{my ($start, $end, $next) = @_;
my $l = $a->size;
If $l == 0, Then {Jmp $end};
$a->pop(my $e = V(element));
$e->outNL;
});
ok Assemble(debug => 0, eq => <<END);
element: 0000 0000 0000 000F
element: 0000 0000 0000 000E
element: 0000 0000 0000 000D
element: 0000 0000 0000 000C
element: 0000 0000 0000 000B
element: 0000 0000 0000 000A
element: 0000 0000 0000 0009
element: 0000 0000 0000 0008
element: 0000 0000 0000 0007
element: 0000 0000 0000 0006
element: 0000 0000 0000 0005
element: 0000 0000 0000 0004
element: 0000 0000 0000 0003
element: 0000 0000 0000 0002
element: 0000 0000 0000 0001
ENDCreate a multi way tree in an arena using SIMD instructions
Create a multiway tree as in Tree::Multi using Avx512 instructions and iterate through it:
my $N = 12;
my $b = CreateArena; # Resizable memory block
my $t = $b->CreateTree; # Multi way tree in memory block
K(count, $N)->for(sub # Add some entries to the tree
{my ($index, $start, $next, $end) = @_;
my $k = $index + 1;
$t->insert($k, $k + 0x100);
$t->insert($k + $N, $k + 0x200);
});
$t->by(sub # Iterate through the tree
{my ($iter, $end) = @_;
$iter->key ->out('key: ');
$iter->data->out(' data: ');
$iter->tree->depth($iter->node, my $D = V(depth));
$t->find($iter->key);
$t->found->out(' found: '); $t->data->out(' data: '); $D->outNL(' depth: ');
});
$t->find(K(key, 0xffff)); $t->found->outNL('Found: '); # Find some entries
$t->find(K(key, 0xd)); $t->found->outNL('Found: ');
If ($t->found,
Then
{$t->data->outNL("Data : ");
});
ok Assemble(debug => 0, eq => <<END);
key: 0000 0000 0000 0001 data: 0000 0000 0000 0101 found: 0000 0000 0000 0001 data: 0000 0000 0000 0101 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0002 data: 0000 0000 0000 0102 found: 0000 0000 0000 0001 data: 0000 0000 0000 0102 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0003 data: 0000 0000 0000 0103 found: 0000 0000 0000 0001 data: 0000 0000 0000 0103 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0004 data: 0000 0000 0000 0104 found: 0000 0000 0000 0001 data: 0000 0000 0000 0104 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0005 data: 0000 0000 0000 0105 found: 0000 0000 0000 0001 data: 0000 0000 0000 0105 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0006 data: 0000 0000 0000 0106 found: 0000 0000 0000 0001 data: 0000 0000 0000 0106 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0007 data: 0000 0000 0000 0107 found: 0000 0000 0000 0001 data: 0000 0000 0000 0107 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0008 data: 0000 0000 0000 0108 found: 0000 0000 0000 0001 data: 0000 0000 0000 0108 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0009 data: 0000 0000 0000 0109 found: 0000 0000 0000 0001 data: 0000 0000 0000 0109 depth: 0000 0000 0000 0002
key: 0000 0000 0000 000A data: 0000 0000 0000 010A found: 0000 0000 0000 0001 data: 0000 0000 0000 010A depth: 0000 0000 0000 0002
key: 0000 0000 0000 000B data: 0000 0000 0000 010B found: 0000 0000 0000 0001 data: 0000 0000 0000 010B depth: 0000 0000 0000 0002
key: 0000 0000 0000 000C data: 0000 0000 0000 010C found: 0000 0000 0000 0001 data: 0000 0000 0000 010C depth: 0000 0000 0000 0002
key: 0000 0000 0000 000D data: 0000 0000 0000 0201 found: 0000 0000 0000 0001 data: 0000 0000 0000 0201 depth: 0000 0000 0000 0001
key: 0000 0000 0000 000E data: 0000 0000 0000 0202 found: 0000 0000 0000 0001 data: 0000 0000 0000 0202 depth: 0000 0000 0000 0002
key: 0000 0000 0000 000F data: 0000 0000 0000 0203 found: 0000 0000 0000 0001 data: 0000 0000 0000 0203 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0010 data: 0000 0000 0000 0204 found: 0000 0000 0000 0001 data: 0000 0000 0000 0204 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0011 data: 0000 0000 0000 0205 found: 0000 0000 0000 0001 data: 0000 0000 0000 0205 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0012 data: 0000 0000 0000 0206 found: 0000 0000 0000 0001 data: 0000 0000 0000 0206 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0013 data: 0000 0000 0000 0207 found: 0000 0000 0000 0001 data: 0000 0000 0000 0207 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0014 data: 0000 0000 0000 0208 found: 0000 0000 0000 0001 data: 0000 0000 0000 0208 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0015 data: 0000 0000 0000 0209 found: 0000 0000 0000 0001 data: 0000 0000 0000 0209 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0016 data: 0000 0000 0000 020A found: 0000 0000 0000 0001 data: 0000 0000 0000 020A depth: 0000 0000 0000 0002
key: 0000 0000 0000 0017 data: 0000 0000 0000 020B found: 0000 0000 0000 0001 data: 0000 0000 0000 020B depth: 0000 0000 0000 0002
key: 0000 0000 0000 0018 data: 0000 0000 0000 020C found: 0000 0000 0000 0001 data: 0000 0000 0000 020C depth: 0000 0000 0000 0002
Found: 0000 0000 0000 0000
Found: 0000 0000 0000 0001
Data : 0000 0000 0000 0201
ENDRecursion with stack and parameter tracing
Call a subroutine recursively and get a trace back showing the procedure calls and parameters passed to each call. Parameters are passed by reference not value.
my $d = V depth, 3; # Create a variable on the stack
my $s = Subroutine
{my ($p, $s) = @_; # Parameters, subroutine descriptor
PrintOutTraceBack;
my $d = $$p{depth}->copy($$p{depth} - 1); # Modify the variable referenced by the parameter
If ($d > 0,
Then
{$s->call($d); # Recurse
});
PrintOutTraceBack;
} [qw(depth)], name => 'ref';
$s->call($d); # Call the subroutine
ok Assemble(debug => 0, eq => <<END);
Subroutine trace back, depth: 0000 0000 0000 0001
0000 0000 0000 0003 ref
Subroutine trace back, depth: 0000 0000 0000 0002
0000 0000 0000 0002 ref
0000 0000 0000 0002 ref
Subroutine trace back, depth: 0000 0000 0000 0003
0000 0000 0000 0001 ref
0000 0000 0000 0001 ref
0000 0000 0000 0001 ref
Subroutine trace back, depth: 0000 0000 0000 0003
0000 0000 0000 0000 ref
0000 0000 0000 0000 ref
0000 0000 0000 0000 ref
Subroutine trace back, depth: 0000 0000 0000 0002
0000 0000 0000 0000 ref
0000 0000 0000 0000 ref
Subroutine trace back, depth: 0000 0000 0000 0001
0000 0000 0000 0000 refEND
Quarks
Quarks replace unique strings with unique numbers and in doing so unite all that is best and brightest in dynamic trees, arrays, strings and short strings, all written in X86 assembler, all generated by Perl:
my $N = 5;
my $a = CreateArena; # Arena containing quarks
my $Q = $a->CreateQuarks; # Quarks
my $s = CreateShortString(0); # Short string used to load and unload quarks
my $d = Rb(1..63);
for my $i(1..$N) # Load a set of quarks
{my $j = $i - 1;
$s->load(K(address, $d), K(size, 4+$i));
my $q = $Q->quarkFromShortString($s);
$q->outNL("New quark $j: "); # New quark, new number
}
PrintOutNL;
for my $i(reverse 1..$N) # Reload a set of quarks
{my $j = $i - 1;
$s->load(K(address, $d), K(size, 4+$i));
my $q = $Q->quarkFromShortString($s);
$q->outNL("Old quark $j: "); # Old quark, old number
}
PrintOutNL;
for my $i(1..$N) # Dump quarks
{my $j = $i - 1;
$s->clear;
$Q->shortStringFromQuark(K(quark, $j), $s);
PrintOutString "Quark string $j: ";
PrintOutRegisterInHex xmm0;
}
ok Assemble(debug => 0, trace => 0, eq => <<END);
New quark 0: 0000 0000 0000 0000
New quark 1: 0000 0000 0000 0001
New quark 2: 0000 0000 0000 0002
New quark 3: 0000 0000 0000 0003
New quark 4: 0000 0000 0000 0004Old quark 4: 0000 0000 0000 0004 Old quark 3: 0000 0000 0000 0003 Old quark 2: 0000 0000 0000 0002 Old quark 1: 0000 0000 0000 0001 Old quark 0: 0000 0000 0000 0000
Quark string 0: xmm0: 0000 0000 0000 0000 0000 0504 0302 0105 Quark string 1: xmm0: 0000 0000 0000 0000 0006 0504 0302 0106 Quark string 2: xmm0: 0000 0000 0000 0000 0706 0504 0302 0107 Quark string 3: xmm0: 0000 0000 0000 0008 0706 0504 0302 0108 Quark string 4: xmm0: 0000 0000 0000 0908 0706 0504 0302 0109 END
Installation
The Intel Software Development Emulator will be required if you do not have a computer with the avx512 instruction set and wish to execute code containing these instructions. For details see:
The Networkwide Assembler is required to assemble the code produced For full details see:
https://github.com/philiprbrenan/NasmX86/blob/main/.github/workflows/main.yml
Execution Options
The "Assemble(%)" function takes the keywords described below to control assembly and execution of the assembled code:
"Assemble(%)" runs the generated program after a successful assembly unless the keep option is specified. The output on stdout is captured in file zzzOut.txt and that on stderr is captured in file zzzErr.txt.
The amount of output displayed is controlled by the debug keyword.
The eq keyword can be used to test that the output by the run.
The output produced by the program execution is returned as the result of the "Assemble(%)" function.
Keep
To produce a named executable without running it, specify:
keep=>"executable file name"Emulator
To run the executable produced by "Assemble(%)" without the Intel emulator, which is used by default if it is present, specify:
emulator=>0eq
The eq keyword supplies the expected output from the execution of the assembled program. If the expected output is not obtained on stdout then we confess and stop further testing. Output on stderr is ignored for test purposes.
The point at which the wanted output diverges from the output actually got is displayed to assist debugging as in:
Comparing wanted with got failed at line: 4, character: 22
Start:
k7: 0000 0000 0000 0001
k6: 0000 0000 0000 0003
k5: 0000 0000 0000 0007
k4: 0000 0000 000
Want ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 0002
k3: 0000 0000 0000 0006
k2: 0000 0000 0000 000E
k1: 0000 0000
Got ________________________________________________________________________________
0 0002
k3: 0000 0000 0000 0006
k2: 0000 0000 0000 000E
k1: 0000 0000Debug
The debug keyword controls how much output is printed after each assemble and run.
debug => 0produces no output unless the eq keyword was specified and the actual output fails to match the expected output. If such a test fails we Carp::confess.
debug => 1shows all the output produces and conducts the test specified by the eq is present. If the test fails we Carp::confess.
debug => 2shows all the output produces and conducts the test specified by the eq is present. If the test fails we continue rather than calling Carp::confess.
Description
Generate X86 assembler code using Perl as a macro pre-processor.
Version "20210904".
The following sections describe the methods in each functional area of this module. For an alphabetic listing of all methods by name see Index.
Data
Layout data
SetLabel($l)
Create (if necessary) and set a label in the code section returning the label so set.
Parameter Description
1 $l LabelExample:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax;Ds(@d)
Layout bytes in memory and return their label.
Parameter Description
1 @d Data to be laid outExample:
my $q = Rs('a'..'z');
Mov rax, Ds('0'x64); # Output area # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Vmovdqu32(xmm0, "[$q]"); # Load
Vprolq (xmm0, xmm0, 32); # Rotate double words in quad words
Vmovdqu32("[rax]", xmm0); # Save
Mov rdi, 16;
PrintOutMemory;
ok Assemble =~ m(efghabcdmnopijkl)s;Rs(@d)
Layout bytes in read only memory and return their label.
Parameter Description
1 @d Data to be laid outExample:
Comment "Print a string from memory";
my $s = "Hello World";
Mov rax, Rs($s); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rdi, length $s;
PrintOutMemory;
Exit(0);
ok Assemble =~ m(Hello World);
my $q = Rs('abababab'); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov(rax, 1);
Mov(rbx, 2);
Mov(rcx, 3);
Mov(rdx, 4);
Mov(r8, 5);
Lea r9, "[rax+rbx]";
PrintOutRegistersInHex;
my $r = Assemble;
ok $r =~ m( r8: 0000 0000 0000 0005.* r9: 0000 0000 0000 0003.*rax: 0000 0000 0000 0001)s;
ok $r =~ m(rbx: 0000 0000 0000 0002.*rcx: 0000 0000 0000 0003.*rdx: 0000 0000 0000 0004)s;Rutf8(@d)
Layout a utf8 encoded string as bytes in read only memory and return their label.
Parameter Description
1 @d Data to be laid outDb(@bytes)
Layout bytes in the data segment and return their label.
Parameter Description
1 @bytes Bytes to layoutExample:
my $s = Rb 0; Rb 1; Rw 2; Rd 3; Rq 4;
my $t = Db 0; Db 1; Dw 2; Dd 3; Dq 4; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Vmovdqu8 xmm0, "[$s]";
Vmovdqu8 xmm1, "[$t]";
PrintOutRegisterInHex xmm0;
PrintOutRegisterInHex xmm1;
Sub rsp, 16;
Mov rax, rsp; # Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi
Mov rdi, 16;
Mov rsi, $s;
CopyMemory(V(source, rsi), V(target, rax), V(size, rdi));
PrintOutMemoryInHex;
my $r = Assemble;
ok $r =~ m(xmm0: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(xmm1: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(0001 0200 0300 00000400 0000 0000 0000);Dw(@words)
Layout words in the data segment and return their label.
Parameter Description
1 @words Words to layoutExample:
my $s = Rb 0; Rb 1; Rw 2; Rd 3; Rq 4;
my $t = Db 0; Db 1; Dw 2; Dd 3; Dq 4; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Vmovdqu8 xmm0, "[$s]";
Vmovdqu8 xmm1, "[$t]";
PrintOutRegisterInHex xmm0;
PrintOutRegisterInHex xmm1;
Sub rsp, 16;
Mov rax, rsp; # Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi
Mov rdi, 16;
Mov rsi, $s;
CopyMemory(V(source, rsi), V(target, rax), V(size, rdi));
PrintOutMemoryInHex;
my $r = Assemble;
ok $r =~ m(xmm0: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(xmm1: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(0001 0200 0300 00000400 0000 0000 0000);Dd(@dwords)
Layout double words in the data segment and return their label.
Parameter Description
1 @dwords Double words to layoutExample:
my $s = Rb 0; Rb 1; Rw 2; Rd 3; Rq 4;
my $t = Db 0; Db 1; Dw 2; Dd 3; Dq 4; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Vmovdqu8 xmm0, "[$s]";
Vmovdqu8 xmm1, "[$t]";
PrintOutRegisterInHex xmm0;
PrintOutRegisterInHex xmm1;
Sub rsp, 16;
Mov rax, rsp; # Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi
Mov rdi, 16;
Mov rsi, $s;
CopyMemory(V(source, rsi), V(target, rax), V(size, rdi));
PrintOutMemoryInHex;
my $r = Assemble;
ok $r =~ m(xmm0: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(xmm1: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(0001 0200 0300 00000400 0000 0000 0000);Dq(@qwords)
Layout quad words in the data segment and return their label.
Parameter Description
1 @qwords Quad words to layoutExample:
my $s = Rb 0; Rb 1; Rw 2; Rd 3; Rq 4;
my $t = Db 0; Db 1; Dw 2; Dd 3; Dq 4; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Vmovdqu8 xmm0, "[$s]";
Vmovdqu8 xmm1, "[$t]";
PrintOutRegisterInHex xmm0;
PrintOutRegisterInHex xmm1;
Sub rsp, 16;
Mov rax, rsp; # Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi
Mov rdi, 16;
Mov rsi, $s;
CopyMemory(V(source, rsi), V(target, rax), V(size, rdi));
PrintOutMemoryInHex;
my $r = Assemble;
ok $r =~ m(xmm0: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(xmm1: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(0001 0200 0300 00000400 0000 0000 0000);Rb(@bytes)
Layout bytes in the data segment and return their label.
Parameter Description
1 @bytes Bytes to layoutExample:
my $s = Rb 0; Rb 1; Rw 2; Rd 3; Rq 4; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $t = Db 0; Db 1; Dw 2; Dd 3; Dq 4;
Vmovdqu8 xmm0, "[$s]";
Vmovdqu8 xmm1, "[$t]";
PrintOutRegisterInHex xmm0;
PrintOutRegisterInHex xmm1;
Sub rsp, 16;
Mov rax, rsp; # Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi
Mov rdi, 16;
Mov rsi, $s;
CopyMemory(V(source, rsi), V(target, rax), V(size, rdi));
PrintOutMemoryInHex;
my $r = Assemble;
ok $r =~ m(xmm0: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(xmm1: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(0001 0200 0300 00000400 0000 0000 0000);Rw(@words)
Layout words in the data segment and return their label.
Parameter Description
1 @words Words to layoutExample:
my $s = Rb 0; Rb 1; Rw 2; Rd 3; Rq 4; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $t = Db 0; Db 1; Dw 2; Dd 3; Dq 4;
Vmovdqu8 xmm0, "[$s]";
Vmovdqu8 xmm1, "[$t]";
PrintOutRegisterInHex xmm0;
PrintOutRegisterInHex xmm1;
Sub rsp, 16;
Mov rax, rsp; # Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi
Mov rdi, 16;
Mov rsi, $s;
CopyMemory(V(source, rsi), V(target, rax), V(size, rdi));
PrintOutMemoryInHex;
my $r = Assemble;
ok $r =~ m(xmm0: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(xmm1: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(0001 0200 0300 00000400 0000 0000 0000);Rd(@dwords)
Layout double words in the data segment and return their label.
Parameter Description
1 @dwords Double words to layoutExample:
my $s = Rb 0; Rb 1; Rw 2; Rd 3; Rq 4; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $t = Db 0; Db 1; Dw 2; Dd 3; Dq 4;
Vmovdqu8 xmm0, "[$s]";
Vmovdqu8 xmm1, "[$t]";
PrintOutRegisterInHex xmm0;
PrintOutRegisterInHex xmm1;
Sub rsp, 16;
Mov rax, rsp; # Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi
Mov rdi, 16;
Mov rsi, $s;
CopyMemory(V(source, rsi), V(target, rax), V(size, rdi));
PrintOutMemoryInHex;
my $r = Assemble;
ok $r =~ m(xmm0: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(xmm1: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(0001 0200 0300 00000400 0000 0000 0000);Rq(@qwords)
Layout quad words in the data segment and return their label.
Parameter Description
1 @qwords Quad words to layoutExample:
my $s = Rb 0; Rb 1; Rw 2; Rd 3; Rq 4; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $t = Db 0; Db 1; Dw 2; Dd 3; Dq 4;
Vmovdqu8 xmm0, "[$s]";
Vmovdqu8 xmm1, "[$t]";
PrintOutRegisterInHex xmm0;
PrintOutRegisterInHex xmm1;
Sub rsp, 16;
Mov rax, rsp; # Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi
Mov rdi, 16;
Mov rsi, $s;
CopyMemory(V(source, rsi), V(target, rax), V(size, rdi));
PrintOutMemoryInHex;
my $r = Assemble;
ok $r =~ m(xmm0: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(xmm1: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(0001 0200 0300 00000400 0000 0000 0000);Registers
Operations on registers
xmm(@r)
Add xmm to the front of a list of register expressions.
Parameter Description
1 @r Register numbersymm(@r)
Add ymm to the front of a list of register expressions.
Parameter Description
1 @r Register numberszmm(@r)
Add zmm to the front of a list of register expressions.
Parameter Description
1 @r Register numbersExample:
LoadZmm 0, 0..63;
PrintOutRegisterInHex zmm 0; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 0, eq => <<END);
zmm0: 3F3E 3D3C 3B3A 3938 3736 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 0302 0100
ENDChooseRegisters($number, @registers)
Choose the specified numbers of registers excluding those on the specified list.
Parameter Description
1 $number Number of registers needed
2 @registers Registers not to chooseRegistersAvailable(@reg)
Add a new set of registers that are available.
Parameter Description
1 @reg Registers known to be available at the momentRegistersFree()
Remove the current set of registers known to be free.
CheckGeneralPurposeRegister($reg)
Check that a register is in fact a general purpose register.
Parameter Description
1 $reg Mask register to checkCheckNumberedGeneralPurposeRegister($reg)
Check that a register is in fact a numbered general purpose register.
Parameter Description
1 $reg Mask register to checkInsertZeroIntoRegisterAtPoint($point, $in)
Insert a zero into the specified register at the point indicated by another register.
Parameter Description
1 $point Register with a single 1 at the insertion point
2 $in Register to be inserted into.Example:
Mov r15, 0x100; # Given a register with a single one in it indicating the desired position,
Mov r14, 0xFFDC; # Insert a zero into the register at that position shifting the bits above that position up left one to make space for the new zero.
Mov r13, 0xF03F;
PrintOutRegisterInHex r14, r15;
InsertZeroIntoRegisterAtPoint r15, r14; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex r14;
Or r14, r15; # Replace the inserted zero with a one
PrintOutRegisterInHex r14;
InsertOneIntoRegisterAtPoint r15, r13;
PrintOutRegisterInHex r13;
ok Assemble(debug => 0, eq => <<END);
r14: 0000 0000 0000 FFDC
r15: 0000 0000 0000 0100
r14: 0000 0000 0001 FEDC
r14: 0000 0000 0001 FFDC
r13: 0000 0000 0001 E13F
ENDInsertOneIntoRegisterAtPoint($point, $in)
Insert a one into the specified register at the point indicated by another register.
Parameter Description
1 $point Register with a single 1 at the insertion point
2 $in Register to be inserted into.Example:
Mov r15, 0x100; # Given a register with a single one in it indicating the desired position,
Mov r14, 0xFFDC; # Insert a zero into the register at that position shifting the bits above that position up left one to make space for the new zero.
Mov r13, 0xF03F;
PrintOutRegisterInHex r14, r15;
InsertZeroIntoRegisterAtPoint r15, r14;
PrintOutRegisterInHex r14;
Or r14, r15; # Replace the inserted zero with a one
PrintOutRegisterInHex r14;
InsertOneIntoRegisterAtPoint r15, r13; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex r13;
ok Assemble(debug => 0, eq => <<END);
r14: 0000 0000 0000 FFDC
r15: 0000 0000 0000 0100
r14: 0000 0000 0001 FEDC
r14: 0000 0000 0001 FFDC
r13: 0000 0000 0001 E13F
ENDLoadZmm($zmm, @bytes)
Load a numbered zmm with the specified bytes.
Parameter Description
1 $zmm Numbered zmm
2 @bytes BytesExample:
LoadZmm 0, 0..63; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex zmm 0;
ok Assemble(debug => 0, eq => <<END);
zmm0: 3F3E 3D3C 3B3A 3938 3736 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 0302 0100
ENDSave and Restore
Saving and restoring registers via the stack
SaveFirstFour(@keep)
Save the first 4 parameter registers making any parameter registers read only.
Parameter Description
1 @keep Registers to mark as read onlyExample:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax;RestoreFirstFour()
Restore the first 4 parameter registers.
Example:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax;RestoreFirstFourExceptRax()
Restore the first 4 parameter registers except rax so it can return its value.
Example:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax;RestoreFirstFourExceptRaxAndRdi()
Restore the first 4 parameter registers except rax and rdi so we can return a pair of values.
Example:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax;SaveFirstSeven()
Save the first 7 parameter registers.
Example:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax;RestoreFirstSeven()
Restore the first 7 parameter registers.
Example:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax;RestoreFirstSevenExceptRax()
Restore the first 7 parameter registers except rax which is being used to return the result.
Example:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax;RestoreFirstSevenExceptRaxAndRdi()
Restore the first 7 parameter registers except rax and rdi which are being used to return the results.
Example:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax;ReorderSyscallRegisters(@registers)
Map the list of registers provided to the 64 bit system call sequence.
Parameter Description
1 @registers RegistersExample:
Mov rax, 1; Mov rdi, 2; Mov rsi, 3; Mov rdx, 4;
Mov r8, 8; Mov r9, 9; Mov r10, 10; Mov r11, 11;
ReorderSyscallRegisters r8,r9; # Reorder the registers for syscall # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax;
PrintOutRegisterInHex rdi;
UnReorderSyscallRegisters r8,r9; # Unreorder the registers to recover their original values
PrintOutRegisterInHex rax;
PrintOutRegisterInHex rdi;
ok Assemble =~ m(rax:.*08.*rdi:.*9.*rax:.*1.*rdi:.*2.*)s;UnReorderSyscallRegisters(@registers)
Recover the initial values in registers that were reordered.
Parameter Description
1 @registers RegistersExample:
Mov rax, 1; Mov rdi, 2; Mov rsi, 3; Mov rdx, 4;
Mov r8, 8; Mov r9, 9; Mov r10, 10; Mov r11, 11;
ReorderSyscallRegisters r8,r9; # Reorder the registers for syscall
PrintOutRegisterInHex rax;
PrintOutRegisterInHex rdi;
UnReorderSyscallRegisters r8,r9; # Unreorder the registers to recover their original values # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax;
PrintOutRegisterInHex rdi;
ok Assemble =~ m(rax:.*08.*rdi:.*9.*rax:.*1.*rdi:.*2.*)s;RegisterSize($r)
Return the size of a register.
Parameter Description
1 $r RegisterExample:
Mov rax, 1;
Mov rdi, 1;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSeven;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFour;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRax;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRax;
PrintOutRegisterInHex rax, rdi;
SaveFirstFour;
Mov rax, 2;
Mov rdi, 2;
SaveFirstSeven;
Mov rax, 3;
Mov rdi, 4;
PrintOutRegisterInHex rax, rdi;
RestoreFirstSevenExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
RestoreFirstFourExceptRaxAndRdi;
PrintOutRegisterInHex rax, rdi;
Bswap rax;
PrintOutRegisterInHex rax;
my $l = Label;
Jmp $l;
SetLabel $l;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0002
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0001
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0002
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0001
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0000 0000 0000 0003
rdi: 0000 0000 0000 0004
rax: 0300 0000 0000 0000
END
ok 8 == RegisterSize rax; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲ClearRegisters(@registers)
Clear registers by setting them to zero.
Parameter Description
1 @registers RegistersExample:
Mov rax,1;
Kmovq k0, rax;
Kaddb k0, k0, k0;
Kaddb k0, k0, k0;
Kaddb k0, k0, k0;
Kmovq rax, k0;
PushR k0;
ClearRegisters k0; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Kmovq k1, k0;
PopR k0;
PrintOutRegisterInHex k0;
PrintOutRegisterInHex k1;
ok Assemble =~ m(k0: 0000 0000 0000 0008.*k1: 0000 0000 0000 0000)s;SetMaskRegister($mask, $start, $length)
Set the mask register to ones starting at the specified position for the specified length and zeroes elsewhere.
Parameter Description
1 $mask Mask register to set
2 $start Register containing start position or 0 for position 0
3 $length Register containing end positionExample:
Mov rax, 8;
Mov rsi, -1;
Inc rsi; SetMaskRegister(k0, rax, rsi); PrintOutRegisterInHex k0; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Inc rsi; SetMaskRegister(k1, rax, rsi); PrintOutRegisterInHex k1; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Inc rsi; SetMaskRegister(k2, rax, rsi); PrintOutRegisterInHex k2; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Inc rsi; SetMaskRegister(k3, rax, rsi); PrintOutRegisterInHex k3; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Inc rsi; SetMaskRegister(k4, rax, rsi); PrintOutRegisterInHex k4; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Inc rsi; SetMaskRegister(k5, rax, rsi); PrintOutRegisterInHex k5; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Inc rsi; SetMaskRegister(k6, rax, rsi); PrintOutRegisterInHex k6; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Inc rsi; SetMaskRegister(k7, rax, rsi); PrintOutRegisterInHex k7; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 0, eq => <<END);
k0: 0000 0000 0000 0000
k1: 0000 0000 0000 0100
k2: 0000 0000 0000 0300
k3: 0000 0000 0000 0700
k4: 0000 0000 0000 0F00
k5: 0000 0000 0000 1F00
k6: 0000 0000 0000 3F00
k7: 0000 0000 0000 7F00
ENDSetZF()
Set the zero flag.
Example:
SetZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutZF;
ClearZF;
PrintOutZF;
SetZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutZF;
SetZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutZF;
ClearZF;
PrintOutZF;
SetZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
IfZ Then {PrintOutStringNL "Zero"}, Else {PrintOutStringNL "NOT zero"};
ClearZF;
IfNz Then {PrintOutStringNL "NOT zero"}, Else {PrintOutStringNL "Zero"};
Mov r15, 5;
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
ok Assemble(debug => 0, eq => <<END);
ZF=1
ZF=0
ZF=1
ZF=1
ZF=0
Zero
NOT zero
Carry
NO carry
Carry
NO carry
ENDClearZF()
Clear the zero flag.
Example:
SetZF;
PrintOutZF;
ClearZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutZF;
SetZF;
PrintOutZF;
SetZF;
PrintOutZF;
ClearZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutZF;
SetZF;
IfZ Then {PrintOutStringNL "Zero"}, Else {PrintOutStringNL "NOT zero"};
ClearZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
IfNz Then {PrintOutStringNL "NOT zero"}, Else {PrintOutStringNL "Zero"};
Mov r15, 5;
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
ok Assemble(debug => 0, eq => <<END);
ZF=1
ZF=0
ZF=1
ZF=1
ZF=0
Zero
NOT zero
Carry
NO carry
Carry
NO carry
ENDMask
Operations on mask registers
CheckMaskRegister($mask)
Check that a register is in fact a mask register.
Parameter Description
1 $mask Mask register to checkLoadConstantIntoMaskRegister($mask, $transfer, $value)
Set a mask register equal to a constant.
Parameter Description
1 $mask Mask register to load
2 $transfer Transfer register
3 $value Constant to loadExample:
Mov r14, 0;
Kmovq k0, r14;
Ktestq k0, k0;
IfZ Then {PrintOutStringNL "0 & 0 == 0"};
PrintOutZF;
LoadConstantIntoMaskRegister k1, r13, 1; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Ktestq k1, k1;
IfNz Then {PrintOutStringNL "1 & 1 != 0"};
PrintOutZF;
LoadConstantIntoMaskRegister k2, r13, eval "0b".(('1'x4).('0'x4))x2; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex k0, k1, k2;
Mov r15, 0x89abcdef;
Mov r14, 0x01234567;
Shl r14, 32;
Or r15, r14;
Push r15;
Push r15;
PopEax; PrintRaxInHex($stdout, 3); PrintOutNL;
my $a = V('aaaa');
$a->pop;
$a->push;
$a->outNL;
PopEax; PrintRaxInHex($stdout, 3); PrintOutNL;
ok Assemble(debug => 0, eq => <<END);
0 & 0 == 0
ZF=1
1 & 1 != 0
ZF=0
k0: 0000 0000 0000 0000
k1: 0000 0000 0000 0001
k2: 0000 0000 0000 F0F0
89AB CDEF
aaaa: 89AB CDEF 0123 4567
0123 4567
ENDLoadBitsIntoMaskRegister($mask, $transfer, $prefix, @values)
Load a bit string specification into a mask register.
Parameter Description
1 $mask Mask register to load
2 $transfer Transfer register
3 $prefix Prefix bits
4 @values +n 1 bits -n 0 bitsExample:
for (0..7)
{ClearRegisters "k$_";
K($_,$_)->setMaskBit("k$_");
PrintOutRegisterInHex "k$_";
}
ClearRegisters k7;
LoadBitsIntoMaskRegister(k7, r15, '1010', -4, +4, -2, +2, -1, +1, -1, +1); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex "k7";
ok Assemble(debug => 0, eq => <<END);
k0: 0000 0000 0000 0001
k1: 0000 0000 0000 0002
k2: 0000 0000 0000 0004
k3: 0000 0000 0000 0008
k4: 0000 0000 0000 0010
k5: 0000 0000 0000 0020
k6: 0000 0000 0000 0040
k7: 0000 0000 0000 0080
k7: 0000 0000 000A 0F35
ENDStructured Programming
Structured programming constructs
If($jump, $then, $else)
If.
Parameter Description
1 $jump Jump op code of variable
2 $then Then - required
3 $else Else - optionalExample:
my $c = K(one,1);
If ($c == 0, # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Then
{PrintOutStringNL "1 == 0";
},
Else
{PrintOutStringNL "1 != 0";
});
ok Assemble(debug => 0, eq => <<END);
1 != 0
ENDThen($block)
Then block for an If statement.
Parameter Description
1 $block Then blockExample:
my $a = V(a, 3); $a->outNL;
my $b = K(b, 2); $b->outNL;
my $c = $a + $b; $c->outNL;
my $d = $c - $a; $d->outNL;
my $g = $a * $b; $g->outNL;
my $h = $g / $b; $h->outNL;
my $i = $a % $b; $i->outNL;
If ($a == 3,
Then # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{PrintOutStringNL "a == 3"
},
Else
{PrintOutStringNL "a != 3"
});
++$a; $a->outNL;
--$a; $a->outNL;
ok Assemble(debug => 0, eq => <<END);
a: 0000 0000 0000 0003
b: 0000 0000 0000 0002
(a add b): 0000 0000 0000 0005
((a add b) sub a): 0000 0000 0000 0002
(a times b): 0000 0000 0000 0006
((a times b) / b): 0000 0000 0000 0003
(a % b): 0000 0000 0000 0001
a == 3
a: 0000 0000 0000 0004
a: 0000 0000 0000 0003
ENDElse($block)
Else block for an If statement.
Parameter Description
1 $block Else blockExample:
my $a = V(a, 3); $a->outNL;
my $b = K(b, 2); $b->outNL;
my $c = $a + $b; $c->outNL;
my $d = $c - $a; $d->outNL;
my $g = $a * $b; $g->outNL;
my $h = $g / $b; $h->outNL;
my $i = $a % $b; $i->outNL;
If ($a == 3,
Then
{PrintOutStringNL "a == 3"
},
Else # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{PrintOutStringNL "a != 3"
});
++$a; $a->outNL;
--$a; $a->outNL;
ok Assemble(debug => 0, eq => <<END);
a: 0000 0000 0000 0003
b: 0000 0000 0000 0002
(a add b): 0000 0000 0000 0005
((a add b) sub a): 0000 0000 0000 0002
(a times b): 0000 0000 0000 0006
((a times b) / b): 0000 0000 0000 0003
(a % b): 0000 0000 0000 0001
a == 3
a: 0000 0000 0000 0004
a: 0000 0000 0000 0003
ENDEf($condition, $then, $else)
Else if block for an If statement.
Parameter Description
1 $condition Condition
2 $then Then block
3 $else Else blockIfEq($then, $else)
If equal execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
my $cmp = sub
{my ($a, $b) = @_;
for my $op(qw(eq ne lt le gt ge))
{Mov rax, $a;
Cmp rax, $b;
my $Op = ucfirst $op;
eval qq(If$Op Then {PrintOutStringNL("$a $op $b")}, Else {PrintOutStringNL("$a NOT $op $b")});
$@ and confess $@;
}
};
&$cmp(1,1);
&$cmp(1,2);
&$cmp(3,2);
Assemble(debug => 0, eq => <<END);
1 eq 1
1 NOT ne 1
1 NOT lt 1
1 le 1
1 NOT gt 1
1 ge 1
1 NOT eq 2
1 ne 2
1 lt 2
1 le 2
1 NOT gt 2
1 NOT ge 2
3 NOT eq 2
3 ne 2
3 NOT lt 2
3 NOT le 2
3 gt 2
3 ge 2
ENDIfNe($then, $else)
If not equal execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
my $cmp = sub
{my ($a, $b) = @_;
for my $op(qw(eq ne lt le gt ge))
{Mov rax, $a;
Cmp rax, $b;
my $Op = ucfirst $op;
eval qq(If$Op Then {PrintOutStringNL("$a $op $b")}, Else {PrintOutStringNL("$a NOT $op $b")});
$@ and confess $@;
}
};
&$cmp(1,1);
&$cmp(1,2);
&$cmp(3,2);
Assemble(debug => 0, eq => <<END);
1 eq 1
1 NOT ne 1
1 NOT lt 1
1 le 1
1 NOT gt 1
1 ge 1
1 NOT eq 2
1 ne 2
1 lt 2
1 le 2
1 NOT gt 2
1 NOT ge 2
3 NOT eq 2
3 ne 2
3 NOT lt 2
3 NOT le 2
3 gt 2
3 ge 2
ENDIfNz($then, $else)
If the zero flag is not set then execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
Mov rax, 0;
Test rax,rax;
IfNz # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Then
{PrintOutRegisterInHex rax;
},
Else
{PrintOutRegisterInHex rbx;
};
Mov rax, 1;
Test rax,rax;
IfNz # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Then
{PrintOutRegisterInHex rcx;
},
Else
{PrintOutRegisterInHex rdx;
};
ok Assemble =~ m(rbx.*rcx)s;IfZ($then, $else)
If the zero flag is set then execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
SetZF;
PrintOutZF;
ClearZF;
PrintOutZF;
SetZF;
PrintOutZF;
SetZF;
PrintOutZF;
ClearZF;
PrintOutZF;
SetZF;
IfZ Then {PrintOutStringNL "Zero"}, Else {PrintOutStringNL "NOT zero"}; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ClearZF;
IfNz Then {PrintOutStringNL "NOT zero"}, Else {PrintOutStringNL "Zero"};
Mov r15, 5;
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
ok Assemble(debug => 0, eq => <<END);
ZF=1
ZF=0
ZF=1
ZF=1
ZF=0
Zero
NOT zero
Carry
NO carry
Carry
NO carry
ENDIfC($then, $else)
If the carry flag is set then execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
SetZF;
PrintOutZF;
ClearZF;
PrintOutZF;
SetZF;
PrintOutZF;
SetZF;
PrintOutZF;
ClearZF;
PrintOutZF;
SetZF;
IfZ Then {PrintOutStringNL "Zero"}, Else {PrintOutStringNL "NOT zero"};
ClearZF;
IfNz Then {PrintOutStringNL "NOT zero"}, Else {PrintOutStringNL "Zero"};
Mov r15, 5;
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"}; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"}; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
ok Assemble(debug => 0, eq => <<END);
ZF=1
ZF=0
ZF=1
ZF=1
ZF=0
Zero
NOT zero
Carry
NO carry
Carry
NO carry
ENDIfNc($then, $else)
If the carry flag is not set then execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
SetZF;
PrintOutZF;
ClearZF;
PrintOutZF;
SetZF;
PrintOutZF;
SetZF;
PrintOutZF;
ClearZF;
PrintOutZF;
SetZF;
IfZ Then {PrintOutStringNL "Zero"}, Else {PrintOutStringNL "NOT zero"};
ClearZF;
IfNz Then {PrintOutStringNL "NOT zero"}, Else {PrintOutStringNL "Zero"};
Mov r15, 5;
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"}; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"}; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 0, eq => <<END);
ZF=1
ZF=0
ZF=1
ZF=1
ZF=0
Zero
NOT zero
Carry
NO carry
Carry
NO carry
ENDIfLt($then, $else)
If less than execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
my $cmp = sub
{my ($a, $b) = @_;
for my $op(qw(eq ne lt le gt ge))
{Mov rax, $a;
Cmp rax, $b;
my $Op = ucfirst $op;
eval qq(If$Op Then {PrintOutStringNL("$a $op $b")}, Else {PrintOutStringNL("$a NOT $op $b")});
$@ and confess $@;
}
};
&$cmp(1,1);
&$cmp(1,2);
&$cmp(3,2);
Assemble(debug => 0, eq => <<END);
1 eq 1
1 NOT ne 1
1 NOT lt 1
1 le 1
1 NOT gt 1
1 ge 1
1 NOT eq 2
1 ne 2
1 lt 2
1 le 2
1 NOT gt 2
1 NOT ge 2
3 NOT eq 2
3 ne 2
3 NOT lt 2
3 NOT le 2
3 gt 2
3 ge 2
ENDIfLe($then, $else)
If less than or equal execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
my $cmp = sub
{my ($a, $b) = @_;
for my $op(qw(eq ne lt le gt ge))
{Mov rax, $a;
Cmp rax, $b;
my $Op = ucfirst $op;
eval qq(If$Op Then {PrintOutStringNL("$a $op $b")}, Else {PrintOutStringNL("$a NOT $op $b")});
$@ and confess $@;
}
};
&$cmp(1,1);
&$cmp(1,2);
&$cmp(3,2);
Assemble(debug => 0, eq => <<END);
1 eq 1
1 NOT ne 1
1 NOT lt 1
1 le 1
1 NOT gt 1
1 ge 1
1 NOT eq 2
1 ne 2
1 lt 2
1 le 2
1 NOT gt 2
1 NOT ge 2
3 NOT eq 2
3 ne 2
3 NOT lt 2
3 NOT le 2
3 gt 2
3 ge 2
ENDIfGt($then, $else)
If greater than execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
my $cmp = sub
{my ($a, $b) = @_;
for my $op(qw(eq ne lt le gt ge))
{Mov rax, $a;
Cmp rax, $b;
my $Op = ucfirst $op;
eval qq(If$Op Then {PrintOutStringNL("$a $op $b")}, Else {PrintOutStringNL("$a NOT $op $b")});
$@ and confess $@;
}
};
&$cmp(1,1);
&$cmp(1,2);
&$cmp(3,2);
Assemble(debug => 0, eq => <<END);
1 eq 1
1 NOT ne 1
1 NOT lt 1
1 le 1
1 NOT gt 1
1 ge 1
1 NOT eq 2
1 ne 2
1 lt 2
1 le 2
1 NOT gt 2
1 NOT ge 2
3 NOT eq 2
3 ne 2
3 NOT lt 2
3 NOT le 2
3 gt 2
3 ge 2
ENDIfGe($then, $else)
If greater than or equal execute the then block else the else block.
Parameter Description
1 $then Then - required
2 $else Else - optionalExample:
my $cmp = sub
{my ($a, $b) = @_;
for my $op(qw(eq ne lt le gt ge))
{Mov rax, $a;
Cmp rax, $b;
my $Op = ucfirst $op;
eval qq(If$Op Then {PrintOutStringNL("$a $op $b")}, Else {PrintOutStringNL("$a NOT $op $b")});
$@ and confess $@;
}
};
&$cmp(1,1);
&$cmp(1,2);
&$cmp(3,2);
Assemble(debug => 0, eq => <<END);
1 eq 1
1 NOT ne 1
1 NOT lt 1
1 le 1
1 NOT gt 1
1 ge 1
1 NOT eq 2
1 ne 2
1 lt 2
1 le 2
1 NOT gt 2
1 NOT ge 2
3 NOT eq 2
3 ne 2
3 NOT lt 2
3 NOT le 2
3 gt 2
3 ge 2
ENDPass($block)
Pass block for an OrBlock.
Parameter Description
1 $block BlockExample:
Mov rax, 1;
OrBlock
{my ($pass, $end, $start) = @_;
Cmp rax, 1;
Je $pass;
Cmp rax, 2;
Je $pass;
PrintOutStringNL "Fail";
}
Pass # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($end, $pass, $start) = @_;
PrintOutStringNL "Pass"; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
};
ok Assemble(debug => 0, eq => <<END);
Pass # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ENDFail($block)
Fail block for an AndBlock.
Parameter Description
1 $block BlockExample:
Mov rax, 1; Mov rdx, 2;
AndBlock
{my ($fail, $end, $start) = @_;
Cmp rax, 1;
Jne $fail;
Cmp rdx, 2;
Jne $fail;
PrintOutStringNL "Pass";
}
Fail # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($end, $fail, $start) = @_;
PrintOutStringNL "Fail"; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
};
ok Assemble(debug => 0, eq => <<END);
Pass
ENDAndBlock($test, $fail)
Short circuit and: execute a block of code to test conditions which, if all of them pass, allows the first block to continue successfully else if one of the conditions fails we execute the optional fail block.
Parameter Description
1 $test Block
2 $fail Optional failure blockExample:
Mov rax, 1; Mov rdx, 2;
AndBlock # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($fail, $end, $start) = @_;
Cmp rax, 1;
Jne $fail;
Cmp rdx, 2;
Jne $fail;
PrintOutStringNL "Pass";
}
Fail
{my ($end, $fail, $start) = @_;
PrintOutStringNL "Fail";
};
ok Assemble(debug => 0, eq => <<END);
Pass
ENDOrBlock($test, $pass)
Short circuit or: execute a block of code to test conditions which, if one of them is met, leads on to the execution of the pass block, if all of the tests fail we continue withe the test block.
Parameter Description
1 $test Tests
2 $pass Optional block to execute on successExample:
Mov rax, 1;
OrBlock # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($pass, $end, $start) = @_;
Cmp rax, 1;
Je $pass;
Cmp rax, 2;
Je $pass;
PrintOutStringNL "Fail";
}
Pass
{my ($end, $pass, $start) = @_;
PrintOutStringNL "Pass";
};
ok Assemble(debug => 0, eq => <<END);
Pass
ENDFor($block, $register, $limit, $increment)
For - iterate the block as long as register is less than limit incrementing by increment each time. Nota Bene: The register is not explicitly set to zero as you might want to start at some other number.
Parameter Description
1 $block Block
2 $register Register
3 $limit Limit on loop
4 $increment Increment on each iterationExample:
For # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($start, $end, $next) = @_;
Cmp rax, 3;
Jge $end;
PrintOutRegisterInHex rax;
} rax, 16, 1;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0000
rax: 0000 0000 0000 0001
rax: 0000 0000 0000 0002
ENDForIn($full, $last, $register, $limitRegister, $increment)
For - iterate the full block as long as register plus increment is less than than limit incrementing by increment each time then increment the last block for the last non full block.
Parameter Description
1 $full Block for full block
2 $last Block for last block
3 $register Register
4 $limitRegister Register containing upper limit of loop
5 $increment Increment on each iterationForEver($block)
Iterate for ever.
Parameter Description
1 $block Block to iterateMacro($block, %options)
Create a sub with optional parameters name=> the name of the subroutine so it can be reused rather than regenerated, comment=> a comment describing the sub.
Parameter Description
1 $block Block
2 %options Options.Call
Call a subroutine
SubroutineStartStack()
Initialize a new stack frame. The first quad of each frame has the address of the name of the sub in the low dword, and the parameter count in the upper byte of the quad. This field is all zeroes in the initial frame.
Subroutine($block, $parameters, %options)
Create a subroutine that can be called in assembler code.
Parameter Description
1 $block Block
2 $parameters [parameters names]
3 %options Options.Example:
my $g = G g, 3;
my $s = Subroutine # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($p, $s) = @_;
$g->copy($g - 1);
$g->outNL;
If ($g > 0,
Then
{$s->call;
});
} [], name => 'ref';
$s->call;
ok Assemble(debug => 0, eq => <<END);
g: 0000 0000 0000 0002
g: 0000 0000 0000 0001
g: 0000 0000 0000 0000
END
my $g = G g, 2;
my $u = Subroutine # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($p, $s) = @_;
PrintOutTraceBack;
$$p{g}->copy(K gg, 1);
PrintOutTraceBack;
} [qw(g)], name => 'uuuu';
my $t = Subroutine # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($p, $s) = @_;
$u->call($$p{g});
} [qw(g)], name => 'tttt';
my $s = Subroutine # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($p, $s) = @_;
$t->call($$p{g});
} [qw(g)], name => 'ssss';
$g->outNL;
$s->call($g);
$g->outNL;
ok Assemble(debug => 0, eq => <<END);
g: 0000 0000 0000 0002
Subroutine trace back, depth: 0000 0000 0000 0003 # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
0000 0000 0000 0002 uuuu
0000 0000 0000 0002 tttt
0000 0000 0000 0002 ssss
Subroutine trace back, depth: 0000 0000 0000 0003 # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
0000 0000 0000 0001 uuuu
0000 0000 0000 0001 tttt
0000 0000 0000 0001 ssss
g: 0000 0000 0000 0001
END
my $r = G r, 2;
my $u = Subroutine # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($p, $s) = @_;
PrintOutTraceBack;
$$p{u}->copy(K gg, 1);
PrintOutTraceBack;
} [qw(u)], name => 'uuuu';
my $t = Subroutine # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($p, $s) = @_;
$u->call(u => $$p{t});
} [qw(t)], name => 'tttt';
my $s = Subroutine # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my ($p, $s) = @_;
$t->call(t => $$p{s});
} [qw(s)], name => 'ssss';
$r->outNL;
$s->call(s=>$r);
$r->outNL;
ok Assemble(debug => 0, eq => <<END);
r: 0000 0000 0000 0002
Subroutine trace back, depth: 0000 0000 0000 0003 # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
0000 0000 0000 0002 uuuu
0000 0000 0000 0002 tttt
0000 0000 0000 0002 ssss
Subroutine trace back, depth: 0000 0000 0000 0003 # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
0000 0000 0000 0001 uuuu
0000 0000 0000 0001 tttt
0000 0000 0000 0001 ssss
r: 0000 0000 0000 0001
ENDNasm::X86::Sub::call($sub, @parameters)
Call a sub passing it some parameters.
Parameter Description
1 $sub Subroutine descriptor
2 @parameters Parameter variablesNasm::X86::Sub::via($sub, $ref, @parameters)
Call a sub by reference passing it some parameters.
Parameter Description
1 $sub Subroutine descriptor
2 $ref Label of sub
3 @parameters Parameter variablesNasm::X86::Sub::V($sub)
Put the address of a subroutine into a stack variable so that it can be passed as a parameter.
Parameter Description
1 $sub Subroutine descriptorPrintTraceBack($channel)
Trace the call stack.
Parameter Description
1 $channel Channel to write onPrintErrTraceBack()
Print sub routine track back on stderr.
PrintOutTraceBack()
Print sub routine track back on stdout.
Example:
my $d = V depth, 3; # Create a variable on the stack
my $s = Subroutine
{my ($p, $s) = @_; # Parameters, subroutine descriptor
PrintOutTraceBack; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $d = $$p{depth}->copy($$p{depth} - 1); # Modify the variable referenced by the parameter
If ($d > 0,
Then
{$s->call($d); # Recurse
});
PrintOutTraceBack; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
} [qw(depth)], name => 'ref';
$s->call($d); # Call the subroutine
ok Assemble(debug => 0, eq => <<END);
Subroutine trace back, depth: 0000 0000 0000 0001
0000 0000 0000 0003 ref
Subroutine trace back, depth: 0000 0000 0000 0002
0000 0000 0000 0002 ref
0000 0000 0000 0002 ref
Subroutine trace back, depth: 0000 0000 0000 0003
0000 0000 0000 0001 ref
0000 0000 0000 0001 ref
0000 0000 0000 0001 ref
Subroutine trace back, depth: 0000 0000 0000 0003
0000 0000 0000 0000 ref
0000 0000 0000 0000 ref
0000 0000 0000 0000 ref
Subroutine trace back, depth: 0000 0000 0000 0002
0000 0000 0000 0000 ref
0000 0000 0000 0000 ref
Subroutine trace back, depth: 0000 0000 0000 0001
0000 0000 0000 0000 ref
ENDOnSegv()
Request a trace back followed by exit on a segv signal.
Example:
OnSegv(); # Request a trace back followed by exit on a segv signal. # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $t = Subroutine # Subroutine that will cause an error to occur to force a trace back to be printed
{Mov r15, 0;
Mov r15, "[r15]"; # Try to read an unmapped memory location
} [qw(in)], name => 'sub that causes a segv'; # The name that will appear in the trace back
$t->call(K(in, 42));
ok Assemble(debug => 0, keep2 => 'signal', emulator=>0, eq => <<END); # Cannot use the emulator because it does not understand signals
Subroutine trace back, depth: 0000 0000 0000 0001
0000 0000 0000 002A sub that causes a segv
ENDcr($block, @registers)
Call a subroutine with a reordering of the registers.
Parameter Description
1 $block Code to execute with reordered registers
2 @registers Registers to reorderComments
Inserts comments into the generated assember code.
CommentWithTraceBack(@comment)
Insert a comment into the assembly code with a traceback showing how it was generated.
Parameter Description
1 @comment Text of commentComment(@comment)
Insert a comment into the assembly code.
Parameter Description
1 @comment Text of commentExample:
Comment "Print a string from memory"; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $s = "Hello World";
Mov rax, Rs($s);
Mov rdi, length $s;
PrintOutMemory;
Exit(0);
ok Assemble =~ m(Hello World);DComment(@comment)
Insert a comment into the data segment.
Parameter Description
1 @comment Text of commentRComment(@comment)
Insert a comment into the read only data segment.
Parameter Description
1 @comment Text of commentPrintNL($channel)
Print a new line to stdout or stderr.
Parameter Description
1 $channel Channel to write onPrintErrNL()
Print a new line to stderr.
PrintOutNL()
Print a new line to stderr.
Example:
my $q = Rs('abababab');
Mov(rax, "[$q]");
PrintOutString "rax: ";
PrintOutRaxInHex;
PrintOutNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Xor rax, rax;
PrintOutString "rax: ";
PrintOutRaxInHex;
PrintOutNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble =~ m(rax: 6261 6261 6261 6261.*rax: 0000 0000 0000 0000)s;PrintString($channel, @string)
Print a constant string to the specified channel.
Parameter Description
1 $channel Channel
2 @string StringsPrintStringNL($channel, @string)
Print a constant string to the specified channel followed by a new line.
Parameter Description
1 $channel Channel
2 @string StringsPrintErrString(@string)
Print a constant string to stderr.
Parameter Description
1 @string StringPrintOutString(@string)
Print a constant string to stdout.
Parameter Description
1 @string StringExample:
my $q = Rs('abababab');
Mov(rax, "[$q]");
PrintOutString "rax: "; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRaxInHex;
PrintOutNL;
Xor rax, rax;
PrintOutString "rax: "; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRaxInHex;
PrintOutNL;
ok Assemble =~ m(rax: 6261 6261 6261 6261.*rax: 0000 0000 0000 0000)s;PrintSpace($channel, $spaces)
Print one or more spaces to the specified channel.
Parameter Description
1 $channel Channel
2 $spaces Number of spaces if not one.PrintErrSpace($spaces)
Print one or more spaces to stderr.
Parameter Description
1 $spaces Number of spaces if not one.PrintOutSpace($spaces)
Print one or more spaces to stdout.
Parameter Description
1 $spaces Number of spaces if not one.PrintErrStringNL(@string)
Print a constant string followed by a new line to stderr.
Parameter Description
1 @string StringsExample:
PrintOutStringNL "Hello World";
PrintOutStringNL "Hello
World";
PrintErrStringNL "Hello World"; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 0, eq => <<END);
Hello World
Hello
World
ENDPrintOutStringNL(@string)
Print a constant string followed by a new line to stdout.
Parameter Description
1 @string StringsExample:
PrintOutStringNL "Hello World"; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutStringNL "Hello
World"; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintErrStringNL "Hello World";
ok Assemble(debug => 0, eq => <<END);
Hello World
Hello
World
ENDPrintRaxInHex($channel, $end)
Write the content of register rax in hexadecimal in big endian notation to the specified channel.
Parameter Description
1 $channel Channel
2 $end Optional end bytePrintErrRaxInHex()
Write the content of register rax in hexadecimal in big endian notation to stderr.
PrintOutRaxInHex()
Write the content of register rax in hexadecimal in big endian notation to stderr.
Example:
my $q = Rs('abababab');
Mov(rax, "[$q]");
PrintOutString "rax: ";
PrintOutRaxInHex; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutNL;
Xor rax, rax;
PrintOutString "rax: ";
PrintOutRaxInHex; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutNL;
ok Assemble =~ m(rax: 6261 6261 6261 6261.*rax: 0000 0000 0000 0000)s;PrintOutRaxInReverseInHex()
Write the content of register rax to stderr in hexadecimal in little endian notation.
Example:
Mov rax, 0x07654321;
Shl rax, 32;
Or rax, 0x07654321;
PushR rax;
PrintOutRaxInHex;
PrintOutNL;
PrintOutRaxInReverseInHex; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutNL;
Mov rax, rsp;
Mov rdi, 8;
PrintOutMemoryInHex;
PrintOutNL;
PopR rax;
Mov rax, 4096;
PushR rax;
Mov rax, rsp;
Mov rdi, 8;
PrintOutMemoryInHex;
PrintOutNL;
PopR rax;
ok Assemble(debug => 0, eq => <<END);
0765 4321 0765 4321
2143 6507 2143 6507
2143 6507 2143 6507
0010 0000 0000 0000
ENDPrintOneRegisterInHex($channel, $r)
Print the named register as a hex strings.
Parameter Description
1 $channel Channel to print on
2 $r Register to printPrintRegisterInHex($channel, @r)
Print the named registers as hex strings.
Parameter Description
1 $channel Channel to print on
2 @r Names of the registers to printPrintErrRegisterInHex(@r)
Print the named registers as hex strings on stderr.
Parameter Description
1 @r Names of the registers to printPrintOutRegisterInHex(@r)
Print the named registers as hex strings on stdout.
Parameter Description
1 @r Names of the registers to printExample:
my $q = Rs(('a'..'p')x4);
Mov r8,"[$q]";
PrintOutRegisterInHex r8; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 0, eq => <<END);
r8: 6867 6665 6463 6261
ENDPrintOutRegistersInHex()
Print the general purpose registers in hex.
Example:
my $q = Rs('abababab');
Mov(rax, 1);
Mov(rbx, 2);
Mov(rcx, 3);
Mov(rdx, 4);
Mov(r8, 5);
Lea r9, "[rax+rbx]";
PrintOutRegistersInHex; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $r = Assemble;
ok $r =~ m( r8: 0000 0000 0000 0005.* r9: 0000 0000 0000 0003.*rax: 0000 0000 0000 0001)s;
ok $r =~ m(rbx: 0000 0000 0000 0002.*rcx: 0000 0000 0000 0003.*rdx: 0000 0000 0000 0004)s;PrintErrZF()
Print the zero flag without disturbing it on stderr.
PrintOutZF()
Print the zero flag without disturbing it on stdout.
Example:
SetZF;
PrintOutZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ClearZF;
PrintOutZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
SetZF;
PrintOutZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
SetZF;
PrintOutZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ClearZF;
PrintOutZF; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
SetZF;
IfZ Then {PrintOutStringNL "Zero"}, Else {PrintOutStringNL "NOT zero"};
ClearZF;
IfNz Then {PrintOutStringNL "NOT zero"}, Else {PrintOutStringNL "Zero"};
Mov r15, 5;
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfC Then {PrintOutStringNL "Carry"} , Else {PrintOutStringNL "NO carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
Shr r15, 1; IfNc Then {PrintOutStringNL "NO carry"}, Else {PrintOutStringNL "Carry"};
ok Assemble(debug => 0, eq => <<END);
ZF=1
ZF=0
ZF=1
ZF=1
ZF=0
Zero
NOT zero
Carry
NO carry
Carry
NO carry
ENDPrintUtf8Char($channel)
Print the utf 8 character addressed by rax to the specified channel. The character must be in little endian form.
Parameter Description
1 $channel ChannelPrintErrUtf8Char()
Print the utf 8 character addressed by rax to stderr.
PrintOutUtf8Char()
Print the utf 8 character addressed by rax to stdout.
Example:
my $u = Rd(convertUtf32ToUtf8LE(ord('α')));
Mov rax, $u;
PrintOutUtf8Char; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutNL;
ok Assemble(debug => 0, trace => 0, eq => <<END);
α
ENDPrintErrUtf32($size, $address)
Print the utf 8 character addressed by rax to stderr.
Parameter Description
1 $size Variable: number of characters to print
2 $address Variable: address of memoryPrintOutUtf32($size, $address)
Print the utf 8 character addressed by rax to stdout.
Parameter Description
1 $size Variable: number of characters to print
2 $address Variable: address of memoryVariables
Variable definitions and operations
Definitions
Variable definitions
Variable($name, $expr, %options)
Create a new variable with the specified name initialized via an optional expression.
Parameter Description
1 $name Name of variable
2 $expr Optional expression initializing variable
3 %options OptionsG($name, $expr, %options)
Define a global variable.
Parameter Description
1 $name Name of variable
2 $expr Initializing expression
3 %options OptionsExample:
my $s = Subroutine
{my ($p) = @_;
$$p{v}->copy($$p{v} + $$p{k} + $$p{g} + 1);
} [qw(v k g)], name => 'add';
my $v = V(v, 1);
my $k = K(k, 2);
my $g = G(g, 3); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$s->call($v, $k, $g);
$v->outNL;
ok Assemble(debug => 0, eq => <<END);
v: 0000 0000 0000 0007
END
my $g = G g, 0; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $s = Subroutine
{my ($p) = @_;
$$p{g}->copy(K value, 1);
} [qw(g)], name => 'ref2';
my $t = Subroutine
{my ($p) = @_;
$s->call($$p{g});
} [qw(g)], name => 'ref';
$t->call($g);
$g->outNL;
ok Assemble(debug => 0, eq => <<END);
g: 0000 0000 0000 0001
ENDK($name, $expr, %options)
Define a constant variable.
Parameter Description
1 $name Name of variable
2 $expr Initializing expression
3 %options OptionsExample:
my $s = Subroutine
{my ($p) = @_;
$$p{v}->copy($$p{v} + $$p{k} + $$p{g} + 1);
} [qw(v k g)], name => 'add';
my $v = V(v, 1);
my $k = K(k, 2); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $g = G(g, 3);
$s->call($v, $k, $g);
$v->outNL;
ok Assemble(debug => 0, eq => <<END);
v: 0000 0000 0000 0007
END
my $g = G g, 0;
my $s = Subroutine
{my ($p) = @_;
$$p{g}->copy(K value, 1); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
} [qw(g)], name => 'ref2';
my $t = Subroutine
{my ($p) = @_;
$s->call($$p{g});
} [qw(g)], name => 'ref';
$t->call($g);
$g->outNL;
ok Assemble(debug => 0, eq => <<END);
g: 0000 0000 0000 0001
END
my $a = V(a, 3); $a->outNL;
my $b = K(b, 2); $b->outNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $c = $a + $b; $c->outNL;
my $d = $c - $a; $d->outNL;
my $g = $a * $b; $g->outNL;
my $h = $g / $b; $h->outNL;
my $i = $a % $b; $i->outNL;
If ($a == 3,
Then
{PrintOutStringNL "a == 3"
},
Else
{PrintOutStringNL "a != 3"
});
++$a; $a->outNL;
--$a; $a->outNL;
ok Assemble(debug => 0, eq => <<END);
a: 0000 0000 0000 0003
b: 0000 0000 0000 0002
(a add b): 0000 0000 0000 0005
((a add b) sub a): 0000 0000 0000 0002
(a times b): 0000 0000 0000 0006
((a times b) / b): 0000 0000 0000 0003
(a % b): 0000 0000 0000 0001
a == 3
a: 0000 0000 0000 0004
a: 0000 0000 0000 0003
ENDR($name)
Define a reference variable.
Parameter Description
1 $name Name of variableV($name, $expr, %options)
Define a variable.
Parameter Description
1 $name Name of variable
2 $expr Initializing expression
3 %options OptionsExample:
my $s = Subroutine
{my ($p) = @_;
$$p{v}->copy($$p{v} + $$p{k} + $$p{g} + 1);
} [qw(v k g)], name => 'add';
my $v = V(v, 1); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $k = K(k, 2);
my $g = G(g, 3);
$s->call($v, $k, $g);
$v->outNL;
ok Assemble(debug => 0, eq => <<END);
v: 0000 0000 0000 0007
END
my $g = G g, 0;
my $s = Subroutine
{my ($p) = @_;
$$p{g}->copy(K value, 1);
} [qw(g)], name => 'ref2';
my $t = Subroutine
{my ($p) = @_;
$s->call($$p{g});
} [qw(g)], name => 'ref';
$t->call($g);
$g->outNL;
ok Assemble(debug => 0, eq => <<END);
g: 0000 0000 0000 0001
END
my $a = V(a, 3); $a->outNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $b = K(b, 2); $b->outNL;
my $c = $a + $b; $c->outNL;
my $d = $c - $a; $d->outNL;
my $g = $a * $b; $g->outNL;
my $h = $g / $b; $h->outNL;
my $i = $a % $b; $i->outNL;
If ($a == 3,
Then
{PrintOutStringNL "a == 3"
},
Else
{PrintOutStringNL "a != 3"
});
++$a; $a->outNL;
--$a; $a->outNL;
ok Assemble(debug => 0, eq => <<END);
a: 0000 0000 0000 0003
b: 0000 0000 0000 0002
(a add b): 0000 0000 0000 0005
((a add b) sub a): 0000 0000 0000 0002
(a times b): 0000 0000 0000 0006
((a times b) / b): 0000 0000 0000 0003
(a % b): 0000 0000 0000 0001
a == 3
a: 0000 0000 0000 0004
a: 0000 0000 0000 0003
ENDPrint variables
Print the values of variables or the memory addressed by them
Nasm::X86::Variable::err($left, $title1, $title2)
Dump the value of a variable on stderr.
Parameter Description
1 $left Left variable
2 $title1 Optional leading title
3 $title2 Optional trailing titleNasm::X86::Variable::out($left, $title1, $title2)
Dump the value of a variable on stdout.
Parameter Description
1 $left Left variable
2 $title1 Optional leading title
3 $title2 Optional trailing titleNasm::X86::Variable::errNL($left, $title1, $title2)
Dump the value of a variable on stderr and append a new line.
Parameter Description
1 $left Left variable
2 $title1 Optional leading title
3 $title2 Optional trailing titleNasm::X86::Variable::d($left, $title1, $title2)
Dump the value of a variable on stderr and append a new line.
Parameter Description
1 $left Left variable
2 $title1 Optional leading title
3 $title2 Optional trailing titleNasm::X86::Variable::outNL($left, $title1, $title2)
Dump the value of a variable on stdout and append a new line.
Parameter Description
1 $left Left variable
2 $title1 Optional leading title
3 $title2 Optional trailing titleNasm::X86::Variable::debug($left)
Dump the value of a variable on stdout with an indication of where the dump came from.
Parameter Description
1 $left Left variableOperations
Variable operations
Nasm::X86::Variable::address($left, $offset)
Get the address of a variable with an optional offset.
Parameter Description
1 $left Left variable
2 $offset Optional offsetNasm::X86::Variable::copy($left, $right, $Transfer)
Copy one variable into another.
Parameter Description
1 $left Left variable
2 $right Right variable
3 $Transfer Optional transfer registerExample:
my $s = Subroutine
{my ($p) = @_;
$$p{v}->copy($$p{v} + $$p{k} + $$p{g} + 1);
} [qw(v k g)], name => 'add';
my $v = V(v, 1);
my $k = K(k, 2);
my $g = G(g, 3);
$s->call($v, $k, $g);
$v->outNL;
ok Assemble(debug => 0, eq => <<END);
v: 0000 0000 0000 0007
END
my $g = G g, 0;
my $s = Subroutine
{my ($p) = @_;
$$p{g}->copy(K value, 1);
} [qw(g)], name => 'ref2';
my $t = Subroutine
{my ($p) = @_;
$s->call($$p{g});
} [qw(g)], name => 'ref';
$t->call($g);
$g->outNL;
ok Assemble(debug => 0, eq => <<END);
g: 0000 0000 0000 0001
ENDNasm::X86::Variable::copyRef($left, $right, $Transfer)
Copy a reference to a variable.
Parameter Description
1 $left Left variable
2 $right Right variable
3 $Transfer Optional transfer registerNasm::X86::Variable::copyZF($var)
Copy the current state of the zero flag into a variable.
Parameter Description
1 $var VariableExample:
Mov r15, 1;
my $z = V(zf);
Cmp r15, 1; $z->copyZF; $z->outNL;
Cmp r15, 2; $z->copyZF; $z->outNL;
Cmp r15, 1; $z->copyZFInverted; $z->outNL;
Cmp r15, 2; $z->copyZFInverted; $z->outNL;
ok Assemble(debug => 0, eq => <<END);
zf: 0000 0000 0000 0001
zf: 0000 0000 0000 0000
zf: 0000 0000 0000 0000
zf: 0000 0000 0000 0001
ENDNasm::X86::Variable::copyZFInverted($var)
Copy the opposite of the current state of the zero flag into a variable.
Parameter Description
1 $var VariableExample:
Mov r15, 1;
my $z = V(zf);
Cmp r15, 1; $z->copyZF; $z->outNL;
Cmp r15, 2; $z->copyZF; $z->outNL;
Cmp r15, 1; $z->copyZFInverted; $z->outNL;
Cmp r15, 2; $z->copyZFInverted; $z->outNL;
ok Assemble(debug => 0, eq => <<END);
zf: 0000 0000 0000 0001
zf: 0000 0000 0000 0000
zf: 0000 0000 0000 0000
zf: 0000 0000 0000 0001
ENDNasm::X86::Variable::equals($op, $left, $right)
Equals operator.
Parameter Description
1 $op Operator
2 $left Left variable
3 $right Right variableNasm::X86::Variable::assign($left, $op, $right)
Assign to the left hand side the value of the right hand side.
Parameter Description
1 $left Left variable
2 $op Operator
3 $right Right variableNasm::X86::Variable::plusAssign($left, $right)
Implement plus and assign.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::minusAssign($left, $right)
Implement minus and assign.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::arithmetic($op, $name, $left, $right)
Return a variable containing the result of an arithmetic operation on the left hand and right hand side variables.
Parameter Description
1 $op Operator
2 $name Operator name
3 $left Left variable
4 $right Right variableNasm::X86::Variable::add($left, $right)
Add the right hand variable to the left hand variable and return the result as a new variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::sub($left, $right)
Subtract the right hand variable from the left hand variable and return the result as a new variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::times($left, $right)
Multiply the left hand variable by the right hand variable and return the result as a new variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::division($op, $left, $right)
Return a variable containing the result or the remainder that occurs when the left hand side is divided by the right hand side.
Parameter Description
1 $op Operator
2 $left Left variable
3 $right Right variableNasm::X86::Variable::divide($left, $right)
Divide the left hand variable by the right hand variable and return the result as a new variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::mod($left, $right)
Divide the left hand variable by the right hand variable and return the remainder as a new variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::boolean($sub, $op, $left, $right)
Combine the left hand variable with the right hand variable via a boolean operator.
Parameter Description
1 $sub Operator
2 $op Operator name
3 $left Left variable
4 $right Right variableNasm::X86::Variable::booleanZF($sub, $op, $left, $right)
Combine the left hand variable with the right hand variable via a boolean operator and indicate the result by setting the zero flag if the result is true.
Parameter Description
1 $sub Operator
2 $op Operator name
3 $left Left variable
4 $right Right variableNasm::X86::Variable::booleanC($cmov, $op, $left, $right)
Combine the left hand variable with the right hand variable via a boolean operator using a conditional move instruction.
Parameter Description
1 $cmov Conditional move instruction name
2 $op Operator name
3 $left Left variable
4 $right Right variableNasm::X86::Variable::eq($left, $right)
Check whether the left hand variable is equal to the right hand variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::ne($left, $right)
Check whether the left hand variable is not equal to the right hand variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::ge($left, $right)
Check whether the left hand variable is greater than or equal to the right hand variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::gt($left, $right)
Check whether the left hand variable is greater than the right hand variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::le($left, $right)
Check whether the left hand variable is less than or equal to the right hand variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::lt($left, $right)
Check whether the left hand variable is less than the right hand variable.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::isRef($variable)
Check whether the specified variable is a reference to another variable.
Parameter Description
1 $variable VariableNasm::X86::Variable::setReg($variable, $register)
Set the named registers from the content of the variable.
Parameter Description
1 $variable Variable
2 $register Register to loadNasm::X86::Variable::getReg($variable, $register, @registers)
Load the variable from the named registers.
Parameter Description
1 $variable Variable
2 $register Register to load
3 @registers Optional further registers to load fromNasm::X86::Variable::getConst($variable, $constant, $transfer)
Load the variable from a constant in effect setting a variable to a specified value.
Parameter Description
1 $variable Variable
2 $constant Constant to load
3 $transfer Optional transfer registerNasm::X86::Variable::getConst22($variable, $constant)
Load the variable from a constant in effect setting a variable to a specified value.
Parameter Description
1 $variable Variable
2 $constant Constant to loadNasm::X86::Variable::incDec($left, $op)
Increment or decrement a variable.
Parameter Description
1 $left Left variable operator
2 $op Address of operator to perform inc or decNasm::X86::Variable::inc($left)
Increment a variable.
Parameter Description
1 $left VariableNasm::X86::Variable::dec($left)
Decrement a variable.
Parameter Description
1 $left VariableNasm::X86::Variable::str($left)
The name of the variable.
Parameter Description
1 $left VariableNasm::X86::Variable::min($left, $right)
Minimum of two variables.
Parameter Description
1 $left Left variable
2 $right Right variable or constantExample:
my $a = V("a", 1);
my $b = V("b", 2);
my $c = $a->min($b);
my $d = $a->max($b);
$a->outNL;
$b->outNL;
$c->outNL;
$d->outNL;
ok Assemble(debug => 0, eq => <<END);
a: 0000 0000 0000 0001
b: 0000 0000 0000 0002
min: 0000 0000 0000 0001
max: 0000 0000 0000 0002
ENDNasm::X86::Variable::max($left, $right)
Maximum of two variables.
Parameter Description
1 $left Left variable
2 $right Right variable or constantExample:
my $a = V("a", 1);
my $b = V("b", 2);
my $c = $a->min($b);
my $d = $a->max($b);
$a->outNL;
$b->outNL;
$c->outNL;
$d->outNL;
ok Assemble(debug => 0, eq => <<END);
a: 0000 0000 0000 0001
b: 0000 0000 0000 0002
min: 0000 0000 0000 0001
max: 0000 0000 0000 0002
ENDNasm::X86::Variable::and($left, $right)
And two variables.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::or($left, $right)
Or two variables.
Parameter Description
1 $left Left variable
2 $right Right variableNasm::X86::Variable::setMask($start, $length, $mask)
Set the mask register to ones starting at the specified position for the specified length and zeroes elsewhere.
Parameter Description
1 $start Variable containing start of mask
2 $length Variable containing length of mask
3 $mask Mask registerExample:
my $start = V("Start", 7);
my $length = V("Length", 3);
$start->setMask($length, k7);
PrintOutRegisterInHex k7;
ok Assemble(debug => 0, eq => <<END);
k7: 0000 0000 0000 0380
END
my $z = V('zero', 0);
my $o = V('one', 1);
my $t = V('two', 2);
$z->setMask($o, k7); PrintOutRegisterInHex k7;
$z->setMask($t, k6); PrintOutRegisterInHex k6;
$z->setMask($o+$t, k5); PrintOutRegisterInHex k5;
$o->setMask($o, k4); PrintOutRegisterInHex k4;
$o->setMask($t, k3); PrintOutRegisterInHex k3;
$o->setMask($o+$t, k2); PrintOutRegisterInHex k2;
$t->setMask($o, k1); PrintOutRegisterInHex k1;
$t->setMask($t, k0); PrintOutRegisterInHex k0;
ok Assemble(debug => 0, eq => <<END);
k7: 0000 0000 0000 0001
k6: 0000 0000 0000 0003
k5: 0000 0000 0000 0007
k4: 0000 0000 0000 0002
k3: 0000 0000 0000 0006
k2: 0000 0000 0000 000E
k1: 0000 0000 0000 0004
k0: 0000 0000 0000 000C
ENDNasm::X86::Variable::setMaskFirst($length, $mask)
Set the first bits in the specified mask register.
Parameter Description
1 $length Variable containing length to set
2 $mask Mask registerNasm::X86::Variable::setMaskBit($index, $mask)
Set a bit in the specified mask register retaining the other bits.
Parameter Description
1 $index Variable containing bit position to set
2 $mask Mask registerNasm::X86::Variable::clearMaskBit($index, $mask)
Clear a bit in the specified mask register retaining the other bits.
Parameter Description
1 $index Variable containing bit position to clear
2 $mask Mask registerNasm::X86::Variable::setBit($index, $mask)
Set a bit in the specified register retaining the other bits.
Parameter Description
1 $index Variable containing bit position to set
2 $mask Mask registerNasm::X86::Variable::clearBit($index, $mask)
Clear a bit in the specified mask register retaining the other bits.
Parameter Description
1 $index Variable containing bit position to clear
2 $mask Mask registerNasm::X86::Variable::setZmm($source, $zmm, $offset, $length)
Load bytes from the memory addressed by specified source variable into the numbered zmm register at the offset in the specified offset moving the number of bytes in the specified variable.
Parameter Description
1 $source Variable containing the address of the source
2 $zmm Number of zmm to load
3 $offset Variable containing offset in zmm to move to
4 $length Variable containing length of moveExample:
my $s = Rb(0..128);
my $source = V(Source, $s);
if (1) # First block
{my $offset = V(Offset, 7);
my $length = V(Length, 3);
$source->setZmm(0, $offset, $length);
}
if (1) # Second block
{my $offset = V(Offset, 33);
my $length = V(Length, 12);
$source->setZmm(0, $offset, $length);
}
PrintOutRegisterInHex zmm0;
ok Assemble(debug => 0, eq => <<END);
zmm0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 000B 0A09 0807 0605 0403 0201 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0201 0000 0000 0000 0000
ENDNasm::X86::Variable::loadZmm($source, $zmm)
Load bytes from the memory addressed by the specified source variable into the numbered zmm register.
Parameter Description
1 $source Variable containing the address of the source
2 $zmm Number of zmm to getloadFromZmm($register, $size, $zmm, $offset)
Load the specified register from the offset located in the numbered zmm.
Parameter Description
1 $register Register to load
2 $size "b|w|d|q" for size
3 $zmm Numbered zmm register to load from
4 $offset Constant offset in bytesputIntoZmm($register, $size, $zmm, $offset)
Put the specified register into the numbered zmm at the specified offset in the zmm.
Parameter Description
1 $register Register to load
2 $size Bwdq for size
3 $zmm Numbered zmm register to load from
4 $offset Constant offset in bytesLoadRegFromMm($mm, $offset, $reg)
Load the specified register from the numbered zmm at the quad offset specified as a constant number.
Parameter Description
1 $mm Mm register
2 $offset Offset in quads
3 $reg General purpose register to loadSaveRegIntoMm($mm, $offset, $reg)
Save the specified register into the numbered zmm at the quad offset specified as a constant number.
Parameter Description
1 $mm Mm register
2 $offset Offset in quads
3 $reg General purpose register to loadgetBwdqFromMm($size, $mm, $offset, $Transfer, $target)
Get the numbered byte|word|double word|quad word from the numbered zmm register and return it in a variable.
Parameter Description
1 $size Size of get
2 $mm Mm register
3 $offset Offset in bytes either as a constant or as a variable
4 $Transfer Optional transfer register
5 $target Optional target variable - if none supplied we create a variablegetBFromXmm($xmm, $offset)
Get the byte from the numbered xmm register and return it in a variable.
Parameter Description
1 $xmm Numbered xmm
2 $offset Offset in bytesgetWFromXmm($xmm, $offset)
Get the word from the numbered xmm register and return it in a variable.
Parameter Description
1 $xmm Numbered xmm
2 $offset Offset in bytesgetDFromXmm($xmm, $offset)
Get the double word from the numbered xmm register and return it in a variable.
Parameter Description
1 $xmm Numbered xmm
2 $offset Offset in bytesgetQFromXmm($xmm, $offset)
Get the quad word from the numbered xmm register and return it in a variable.
Parameter Description
1 $xmm Numbered xmm
2 $offset Offset in bytesgetBFromZmm($zmm, $offset)
Get the byte from the numbered zmm register and return it in a variable.
Parameter Description
1 $zmm Numbered zmm
2 $offset Offset in bytesgetWFromZmm($zmm, $offset)
Get the word from the numbered zmm register and return it in a variable.
Parameter Description
1 $zmm Numbered zmm
2 $offset Offset in bytesgetDFromZmm($zmm, $offset, $transfer)
Get the double word from the numbered zmm register and return it in a variable.
Parameter Description
1 $zmm Numbered zmm
2 $offset Offset in bytes
3 $transfer Optional transfer registerExample:
my $s = Rb(0..8);
my $c = V("Content", "[$s]");
$c->putBIntoZmm(0, 4);
$c->putWIntoZmm(0, 6);
$c->putDIntoZmm(0, 10);
$c->putQIntoZmm(0, 16);
PrintOutRegisterInHex zmm0;
getBFromZmm(0, 12)->outNL;
getWFromZmm(0, 12)->outNL;
getDFromZmm(0, 12, r15)->outNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
getQFromZmm(0, 12)->outNL;
ok Assemble(debug => 0, eq => <<END);
zmm0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0706 0504 0302 0100 0000 0302 0100 0000 0100 0000 0000 0000
b at offset 12 in zmm0: 0000 0000 0000 0002
w at offset 12 in zmm0: 0000 0000 0000 0302
d at offset 12 in zmm0: 0000 0000 0000 0302
q at offset 12 in zmm0: 0302 0100 0000 0302
ENDgetQFromZmm($zmm, $offset)
Get the quad word from the numbered zmm register and return it in a variable.
Parameter Description
1 $zmm Numbered zmm
2 $offset Offset in bytesNasm::X86::Variable::getBFromZmm($variable, $zmm, $offset)
Get the byte from the numbered zmm register and put it in a variable.
Parameter Description
1 $variable Variable
2 $zmm Numbered zmm
3 $offset Offset in bytesNasm::X86::Variable::getWFromZmm($variable, $zmm, $offset)
Get the word from the numbered zmm register and put it in a variable.
Parameter Description
1 $variable Variable
2 $zmm Numbered zmm
3 $offset Offset in bytesNasm::X86::Variable::getDFromZmm($variable, $zmm, $offset, $transfer)
Get the double word from the numbered zmm register and put it in a variable.
Parameter Description
1 $variable Variable
2 $zmm Numbered zmm
3 $offset Offset in bytes
4 $transfer Transfer registerNasm::X86::Variable::getQFromZmm($variable, $zmm, $offset)
Get the quad word from the numbered zmm register and put it in a variable.
Parameter Description
1 $variable Variable
2 $zmm Numbered zmm
3 $offset Offset in bytesNasm::X86::Variable::putBwdqIntoMm($content, $size, $mm, $offset, $Transfer)
Place the value of the content variable at the byte|word|double word|quad word in the numbered zmm register.
Parameter Description
1 $content Variable with content
2 $size Size of put
3 $mm Numbered zmm
4 $offset Offset in bytes
5 $Transfer Optional transfer registerNasm::X86::Variable::putBIntoXmm($content, $xmm, $offset)
Place the value of the content variable at the byte in the numbered xmm register.
Parameter Description
1 $content Variable with content
2 $xmm Numbered xmm
3 $offset Offset in bytesNasm::X86::Variable::putWIntoXmm($content, $xmm, $offset)
Place the value of the content variable at the word in the numbered xmm register.
Parameter Description
1 $content Variable with content
2 $xmm Numbered xmm
3 $offset Offset in bytesNasm::X86::Variable::putDIntoXmm($content, $xmm, $offset)
Place the value of the content variable at the double word in the numbered xmm register.
Parameter Description
1 $content Variable with content
2 $xmm Numbered xmm
3 $offset Offset in bytesNasm::X86::Variable::putQIntoXmm($content, $xmm, $offset)
Place the value of the content variable at the quad word in the numbered xmm register.
Parameter Description
1 $content Variable with content
2 $xmm Numbered xmm
3 $offset Offset in bytesNasm::X86::Variable::putBIntoZmm($content, $zmm, $offset)
Place the value of the content variable at the byte in the numbered zmm register.
Parameter Description
1 $content Variable with content
2 $zmm Numbered zmm
3 $offset Offset in bytesNasm::X86::Variable::putWIntoZmm($content, $zmm, $offset)
Place the value of the content variable at the word in the numbered zmm register.
Parameter Description
1 $content Variable with content
2 $zmm Numbered zmm
3 $offset Offset in bytesNasm::X86::Variable::putDIntoZmm($content, $zmm, $offset, $transfer)
Place the value of the content variable at the double word in the numbered zmm register.
Parameter Description
1 $content Variable with content
2 $zmm Numbered zmm
3 $offset Offset in bytes
4 $transfer Optional transfer registerExample:
my $s = Rb(0..8);
my $c = V("Content", "[$s]");
$c->putBIntoZmm(0, 4);
$c->putWIntoZmm(0, 6);
$c->putDIntoZmm(0, 10);
$c->putQIntoZmm(0, 16);
PrintOutRegisterInHex zmm0;
getBFromZmm(0, 12)->outNL;
getWFromZmm(0, 12)->outNL;
getDFromZmm(0, 12, r15)->outNL;
getQFromZmm(0, 12)->outNL;
ok Assemble(debug => 0, eq => <<END);
zmm0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0706 0504 0302 0100 0000 0302 0100 0000 0100 0000 0000 0000
b at offset 12 in zmm0: 0000 0000 0000 0002
w at offset 12 in zmm0: 0000 0000 0000 0302
d at offset 12 in zmm0: 0000 0000 0000 0302
q at offset 12 in zmm0: 0302 0100 0000 0302
ENDNasm::X86::Variable::putQIntoZmm($content, $zmm, $offset, $transfer)
Place the value of the content variable at the quad word in the numbered zmm register.
Parameter Description
1 $content Variable with content
2 $zmm Numbered zmm
3 $offset Offset in bytes
4 $transfer Optional transfer registerBroadcast
Broadcast from a variable into a zmm
Nasm::X86::Variable::zBroadCastD($variable, $zmm)
Broadcast a double word in a variable into the numbered zmm.
Parameter Description
1 $variable Variable containing value to broadcast
2 $zmm Numbered zmm to broadcast toStack
Push and pop variables to and from the stack
Nasm::X86::Variable::push($variable)
Push a variable onto the stack.
Parameter Description
1 $variable VariableNasm::X86::Variable::pop($variable)
Pop a variable from the stack.
Parameter Description
1 $variable VariableMemory
Actions on memory described by variables
Nasm::X86::Variable::clearMemory($address, $size)
Clear the memory described in this variable.
Parameter Description
1 $address Address of memory to clear
2 $size Size of the memory to clearNasm::X86::Variable::copyMemory($target, $source, $size)
Copy from one block of memory to another.
Parameter Description
1 $target Address of target
2 $source Address of source
3 $size Length to copyNasm::X86::Variable::printMemoryInHexNL($address, $channel, $size)
Write, in hexadecimal, the memory addressed by a variable to stdout or stderr.
Parameter Description
1 $address Address of memory
2 $channel Channel to print on
3 $size Number of bytes to printNasm::X86::Variable::printErrMemoryInHexNL($address, $size)
Write the memory addressed by a variable to stderr.
Parameter Description
1 $address Address of memory
2 $size Number of bytes to printNasm::X86::Variable::printOutMemoryInHexNL($address, $size)
Write the memory addressed by a variable to stdout.
Parameter Description
1 $address Address of memory
2 $size Number of bytes to printExample:
my $u = Rd(ord('𝝰'), ord('𝝱'), ord('𝝲'), ord('𝝳'));
Mov rax, $u;
my $address = V(address)->getReg(rax);
$address->printOutMemoryInHexNL(K(size, 16));
ok Assemble(debug => 0, trace => 0, eq => <<END);
70D7 0100 71D7 010072D7 0100 73D7 0100
END
my $v = V(var, 2);
If $v == 0, Then {Mov rax, 0},
Ef {$v == 1} Then {Mov rax, 1},
Ef {$v == 2} Then {Mov rax, 2},
Else {Mov rax, 3};
PrintOutRegisterInHex rax;
ok Assemble(debug => 0, trace => 0, eq => <<END);
rax: 0000 0000 0000 0002
ENDNasm::X86::Variable::freeMemory($address, $size)
Free the memory addressed by this variable for the specified length.
Parameter Description
1 $address Address of memory to free
2 $size Size of the memory to freeExample:
my $N = V(size, 2048);
my $q = Rs('a'..'p');
AllocateMemory($N, my $address = V(address));
Vmovdqu8 xmm0, "[$q]";
$address->setReg(rax);
Vmovdqu8 "[rax]", xmm0;
Mov rdi, 16;
PrintOutMemory;
PrintOutNL;
FreeMemory(address => $address, size=> $N);
ok Assemble(debug => 0, eq => <<END);
abcdefghijklmnop
ENDNasm::X86::Variable::allocateMemory($size)
Allocate the specified amount of memory via mmap and return its address.
Parameter Description
1 $size SizeStructured Programming with variables
Structured programming operations driven off variables.
Nasm::X86::Variable::for($limit, $block)
Iterate the block limit times.
Parameter Description
1 $limit Limit
2 $block BlockExample:
V(limit,10)->for(sub
{my ($i, $start, $next, $end) = @_;
$i->outNL;
});
ok Assemble(debug => 0, eq => <<END);
index: 0000 0000 0000 0000
index: 0000 0000 0000 0001
index: 0000 0000 0000 0002
index: 0000 0000 0000 0003
index: 0000 0000 0000 0004
index: 0000 0000 0000 0005
index: 0000 0000 0000 0006
index: 0000 0000 0000 0007
index: 0000 0000 0000 0008
index: 0000 0000 0000 0009
ENDStack
Manage data on the stack
Push, Pop, Peek
Generic versions of push, pop, peek
PopR(@r)
Pop registers from the stack. Use the last stored set if none explicitly supplied. Pops are done in reverse order to match the original pushing order.
Parameter Description
1 @r RegisterExample:
Mov rax, 0x11111111;
Mov rbx, 0x22222222;
PushR my @save = (rax, rbx);
Mov rax, 0x33333333;
PopR; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax;
PrintOutRegisterInHex rbx;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 1111 1111
rbx: 0000 0000 2222 2222
ENDPopEax()
We cannot pop a double word from the stack in 64 bit long mode using pop so we improvise.
Example:
Mov r14, 0;
Kmovq k0, r14;
Ktestq k0, k0;
IfZ Then {PrintOutStringNL "0 & 0 == 0"};
PrintOutZF;
LoadConstantIntoMaskRegister k1, r13, 1;
Ktestq k1, k1;
IfNz Then {PrintOutStringNL "1 & 1 != 0"};
PrintOutZF;
LoadConstantIntoMaskRegister k2, r13, eval "0b".(('1'x4).('0'x4))x2;
PrintOutRegisterInHex k0, k1, k2;
Mov r15, 0x89abcdef;
Mov r14, 0x01234567;
Shl r14, 32;
Or r15, r14;
Push r15;
Push r15;
PopEax; PrintRaxInHex($stdout, 3); PrintOutNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $a = V('aaaa');
$a->pop;
$a->push;
$a->outNL;
PopEax; PrintRaxInHex($stdout, 3); PrintOutNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 0, eq => <<END);
0 & 0 == 0
ZF=1
1 & 1 != 0
ZF=0
k0: 0000 0000 0000 0000
k1: 0000 0000 0000 0001
k2: 0000 0000 0000 F0F0
89AB CDEF
aaaa: 89AB CDEF 0123 4567
0123 4567
ENDPeekR($r)
Peek at register on stack.
Parameter Description
1 $r RegisterPushZmm(@Z)
Push several zmm registers.
Parameter Description
1 @Z Zmm register numbersPopZmm()
Pop zmm registers.
PushMask(@M)
Push several Mask registers.
Parameter Description
1 @M Mask register numbersPopMask()
Pop Mask registers.
Declarations
Declare variables and structures
Structures
Declare a structure
Structure()
Create a structure addressed by a register.
Nasm::X86::Structure::field($structure, $length, $comment)
Add a field of the specified length with an optional comment.
Parameter Description
1 $structure Structure data descriptor
2 $length Length of data
3 $comment Optional commentNasm::X86::StructureField::addr($field, $register)
Address a field in a structure by either the default register or the named register.
Parameter Description
1 $field Field
2 $register Optional address register else raxAll8Structure($N)
Create a structure consisting of 8 byte fields.
Parameter Description
1 $N Number of variables requiredStack Frame
Declare local variables in a frame on the stack
LocalData()
Map local data.
Nasm::X86::LocalData::start($local)
Start a local data area on the stack.
Parameter Description
1 $local Local data descriptorNasm::X86::LocalData::free($local)
Free a local data area on the stack.
Parameter Description
1 $local Local data descriptorNasm::X86::LocalData::variable($local, $length, $comment)
Add a local variable.
Parameter Description
1 $local Local data descriptor
2 $length Length of data
3 $comment Optional commentNasm::X86::LocalVariable::stack($variable)
Address a local variable on the stack.
Parameter Description
1 $variable VariableNasm::X86::LocalData::allocate8($local, @comments)
Add some 8 byte local variables and return an array of variable definitions.
Parameter Description
1 $local Local data descriptor
2 @comments Optional commentAllocateAll8OnStack($N)
Create a local data descriptor consisting of the specified number of 8 byte local variables and return an array: (local data descriptor, variable definitions...).
Parameter Description
1 $N Number of variables requiredOperating system
Interacting with the operating system.
Processes
Create and manage processes
Fork()
Fork.
Example:
Fork; # Fork # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Test rax,rax;
IfNz # Parent
Then
{Mov rbx, rax;
WaitPid;
GetPid; # Pid of parent as seen in parent
Mov rcx,rax;
PrintOutRegisterInHex rax, rbx, rcx;
},
Else # Child
{Mov r8,rax;
GetPid; # Child pid as seen in child
Mov r9,rax;
GetPPid; # Parent pid as seen in child
Mov r10,rax;
PrintOutRegisterInHex r8, r9, r10;
};
my $r = Assemble;
# r8: 0000 0000 0000 0000 #1 Return from fork as seen by child
# r9: 0000 0000 0003 0C63 #2 Pid of child
# r10: 0000 0000 0003 0C60 #3 Pid of parent from child
# rax: 0000 0000 0003 0C63 #4 Return from fork as seen by parent
# rbx: 0000 0000 0003 0C63 #5 Wait for child pid result
# rcx: 0000 0000 0003 0C60 #6 Pid of parent
if ($r =~ m(r8:( 0000){4}.*r9:(.*)\s{5,}r10:(.*)\s{5,}rax:(.*)\s{5,}rbx:(.*)\s{5,}rcx:(.*)\s{2,})s)
{ok $2 eq $4;
ok $2 eq $5;
ok $3 eq $6;
ok $2 gt $6;
}GetPid()
Get process identifier.
Example:
Fork; # Fork
Test rax,rax;
IfNz # Parent
Then
{Mov rbx, rax;
WaitPid;
GetPid; # Pid of parent as seen in parent # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rcx,rax;
PrintOutRegisterInHex rax, rbx, rcx;
},
Else # Child
{Mov r8,rax;
GetPid; # Child pid as seen in child # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov r9,rax;
GetPPid; # Parent pid as seen in child
Mov r10,rax;
PrintOutRegisterInHex r8, r9, r10;
};
my $r = Assemble;
# r8: 0000 0000 0000 0000 #1 Return from fork as seen by child
# r9: 0000 0000 0003 0C63 #2 Pid of child
# r10: 0000 0000 0003 0C60 #3 Pid of parent from child
# rax: 0000 0000 0003 0C63 #4 Return from fork as seen by parent
# rbx: 0000 0000 0003 0C63 #5 Wait for child pid result
# rcx: 0000 0000 0003 0C60 #6 Pid of parent
if ($r =~ m(r8:( 0000){4}.*r9:(.*)\s{5,}r10:(.*)\s{5,}rax:(.*)\s{5,}rbx:(.*)\s{5,}rcx:(.*)\s{2,})s)
{ok $2 eq $4;
ok $2 eq $5;
ok $3 eq $6;
ok $2 gt $6;
}GetPidInHex()
Get process identifier in hex as 8 zero terminated bytes in rax.
Example:
GetPidInHex; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax;
ok Assemble =~ m(rax: 00);GetPPid()
Get parent process identifier.
Example:
Fork; # Fork
Test rax,rax;
IfNz # Parent
Then
{Mov rbx, rax;
WaitPid;
GetPid; # Pid of parent as seen in parent
Mov rcx,rax;
PrintOutRegisterInHex rax, rbx, rcx;
},
Else # Child
{Mov r8,rax;
GetPid; # Child pid as seen in child
Mov r9,rax;
GetPPid; # Parent pid as seen in child # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov r10,rax;
PrintOutRegisterInHex r8, r9, r10;
};
my $r = Assemble;
# r8: 0000 0000 0000 0000 #1 Return from fork as seen by child
# r9: 0000 0000 0003 0C63 #2 Pid of child
# r10: 0000 0000 0003 0C60 #3 Pid of parent from child
# rax: 0000 0000 0003 0C63 #4 Return from fork as seen by parent
# rbx: 0000 0000 0003 0C63 #5 Wait for child pid result
# rcx: 0000 0000 0003 0C60 #6 Pid of parent
if ($r =~ m(r8:( 0000){4}.*r9:(.*)\s{5,}r10:(.*)\s{5,}rax:(.*)\s{5,}rbx:(.*)\s{5,}rcx:(.*)\s{2,})s)
{ok $2 eq $4;
ok $2 eq $5;
ok $3 eq $6;
ok $2 gt $6;
}GetUid()
Get userid of current process.
Example:
GetUid; # Userid # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax;
my $r = Assemble;
ok $r =~ m(rax:( 0000){3});WaitPid()
Wait for the pid in rax to complete.
Example:
Fork; # Fork
Test rax,rax;
IfNz # Parent
Then
{Mov rbx, rax;
WaitPid; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
GetPid; # Pid of parent as seen in parent
Mov rcx,rax;
PrintOutRegisterInHex rax, rbx, rcx;
},
Else # Child
{Mov r8,rax;
GetPid; # Child pid as seen in child
Mov r9,rax;
GetPPid; # Parent pid as seen in child
Mov r10,rax;
PrintOutRegisterInHex r8, r9, r10;
};
my $r = Assemble;
# r8: 0000 0000 0000 0000 #1 Return from fork as seen by child
# r9: 0000 0000 0003 0C63 #2 Pid of child
# r10: 0000 0000 0003 0C60 #3 Pid of parent from child
# rax: 0000 0000 0003 0C63 #4 Return from fork as seen by parent
# rbx: 0000 0000 0003 0C63 #5 Wait for child pid result
# rcx: 0000 0000 0003 0C60 #6 Pid of parent
if ($r =~ m(r8:( 0000){4}.*r9:(.*)\s{5,}r10:(.*)\s{5,}rax:(.*)\s{5,}rbx:(.*)\s{5,}rcx:(.*)\s{2,})s)
{ok $2 eq $4;
ok $2 eq $5;
ok $3 eq $6;
ok $2 gt $6;
}ReadTimeStampCounter()
Read the time stamp counter and return the time in nanoseconds in rax.
Example:
for(1..10)
{ReadTimeStampCounter; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax;
}
my @s = split /
/, Assemble;
my @S = sort @s;
is_deeply \@s, \@S;Memory
Allocate and print memory
PrintMemoryInHex($channel)
Dump memory from the address in rax for the length in rdi on the specified channel. As this method prints in blocks of 8 up to 7 bytes will be missing from the end unless the length is a multiple of 8 .
Parameter Description
1 $channel ChannelPrintErrMemoryInHex()
Dump memory from the address in rax for the length in rdi on stderr.
PrintOutMemoryInHex()
Dump memory from the address in rax for the length in rdi on stdout.
Example:
Mov rax, 0x07654321;
Shl rax, 32;
Or rax, 0x07654321;
PushR rax;
PrintOutRaxInHex;
PrintOutNL;
PrintOutRaxInReverseInHex;
PrintOutNL;
Mov rax, rsp;
Mov rdi, 8;
PrintOutMemoryInHex; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutNL;
PopR rax;
Mov rax, 4096;
PushR rax;
Mov rax, rsp;
Mov rdi, 8;
PrintOutMemoryInHex; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutNL;
PopR rax;
ok Assemble(debug => 0, eq => <<END);
0765 4321 0765 4321
2143 6507 2143 6507
2143 6507 2143 6507
0010 0000 0000 0000
ENDPrintErrMemoryInHexNL()
Dump memory from the address in rax for the length in rdi and then print a new line.
PrintOutMemoryInHexNL()
Dump memory from the address in rax for the length in rdi and then print a new line.
Example:
my $N = 256;
my $s = Rb 0..$N-1;
AllocateMemory(K(size, $N), my $a = V(address));
CopyMemory(V(source, $s), V(size, $N), target => $a);
AllocateMemory(K(size, $N), my $b = V(address));
CopyMemory(source => $a, target => $b, K(size, $N));
$b->setReg(rax);
Mov rdi, $N;
PrintOutMemoryInHexNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug=>0, eq => <<END);
0001 0203 0405 06070809 0A0B 0C0D 0E0F1011 1213 1415 16171819 1A1B 1C1D 1E1F2021 2223 2425 26272829 2A2B 2C2D 2E2F3031 3233 3435 36373839 3A3B 3C3D 3E3F4041 4243 4445 46474849 4A4B 4C4D 4E4F5051 5253 5455 56575859 5A5B 5C5D 5E5F6061 6263 6465 66676869 6A6B 6C6D 6E6F7071 7273 7475 76777879 7A7B 7C7D 7E7F8081 8283 8485 86878889 8A8B 8C8D 8E8F9091 9293 9495 96979899 9A9B 9C9D 9E9FA0A1 A2A3 A4A5 A6A7A8A9 AAAB ACAD AEAFB0B1 B2B3 B4B5 B6B7B8B9 BABB BCBD BEBFC0C1 C2C3 C4C5 C6C7C8C9 CACB CCCD CECFD0D1 D2D3 D4D5 D6D7D8D9 DADB DCDD DEDFE0E1 E2E3 E4E5 E6E7E8E9 EAEB ECED EEEFF0F1 F2F3 F4F5 F6F7F8F9 FAFB FCFD FEFF
ENDPrintMemory($channel)
Print the memory addressed by rax for a length of rdi on the specified channel.
Parameter Description
1 $channel ChannelExample:
my $file = G(file, Rs($0));
my $size = G(size);
my $address = G(address);
ReadFile $file, $size, $address; # Read file
$address->setReg(rax); # Address of file in memory
$size ->setReg(rdi); # Length of file in memory
PrintOutMemory; # Print contents of memory to stdout
my $r = Assemble; # Assemble and execute
ok stringMd5Sum($r) eq fileMd5Sum($0); # Output contains this filePrintMemoryNL()
Print the memory addressed by rax for a length of rdi on the specified channel followed by a new line.
PrintErrMemory()
Print the memory addressed by rax for a length of rdi on stderr.
PrintOutMemory()
Print the memory addressed by rax for a length of rdi on stdout.
Example:
Comment "Print a string from memory";
my $s = "Hello World";
Mov rax, Rs($s);
Mov rdi, length $s;
PrintOutMemory; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Exit(0);
ok Assemble =~ m(Hello World);PrintErrMemoryNL()
Print the memory addressed by rax for a length of rdi followed by a new line on stderr.
PrintOutMemoryNL()
Print the memory addressed by rax for a length of rdi followed by a new line on stdout.
Example:
my $s = Rs("Hello WorldHello Skye"); Mov rax, $s; Cstrlen; Mov rdi, r15;
PrintOutMemoryNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 0, eq => <<END);
Hello World
Hello Skye
ENDAllocateMemory(@variables)
Allocate the specified amount of memory via mmap and return its address.
Parameter Description
1 @variables ParametersExample:
my $N = V(size, 2048);
my $q = Rs('a'..'p');
AllocateMemory($N, my $address = V(address)); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Vmovdqu8 xmm0, "[$q]";
$address->setReg(rax);
Vmovdqu8 "[rax]", xmm0;
Mov rdi, 16;
PrintOutMemory;
PrintOutNL;
FreeMemory(address => $address, size=> $N);
ok Assemble(debug => 0, eq => <<END);
abcdefghijklmnop
END
my $N = V(size, 4096); # Size of the initial allocation which should be one or more pages
AllocateMemory($N, my $A = V(address)); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ClearMemory($N, $A);
$A->setReg(rax);
Mov rdi, 128;
PrintOutMemoryInHexNL;
FreeMemory($N, $A);
ok Assemble(debug => 1, eq => <<END);
0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
END
my $N = 256;
my $s = Rb 0..$N-1;
AllocateMemory(K(size, $N), my $a = V(address)); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
CopyMemory(V(source, $s), V(size, $N), target => $a);
AllocateMemory(K(size, $N), my $b = V(address)); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
CopyMemory(source => $a, target => $b, K(size, $N));
$b->setReg(rax);
Mov rdi, $N;
PrintOutMemoryInHexNL;
ok Assemble(debug=>0, eq => <<END);
0001 0203 0405 06070809 0A0B 0C0D 0E0F1011 1213 1415 16171819 1A1B 1C1D 1E1F2021 2223 2425 26272829 2A2B 2C2D 2E2F3031 3233 3435 36373839 3A3B 3C3D 3E3F4041 4243 4445 46474849 4A4B 4C4D 4E4F5051 5253 5455 56575859 5A5B 5C5D 5E5F6061 6263 6465 66676869 6A6B 6C6D 6E6F7071 7273 7475 76777879 7A7B 7C7D 7E7F8081 8283 8485 86878889 8A8B 8C8D 8E8F9091 9293 9495 96979899 9A9B 9C9D 9E9FA0A1 A2A3 A4A5 A6A7A8A9 AAAB ACAD AEAFB0B1 B2B3 B4B5 B6B7B8B9 BABB BCBD BEBFC0C1 C2C3 C4C5 C6C7C8C9 CACB CCCD CECFD0D1 D2D3 D4D5 D6D7D8D9 DADB DCDD DEDFE0E1 E2E3 E4E5 E6E7E8E9 EAEB ECED EEEFF0F1 F2F3 F4F5 F6F7F8F9 FAFB FCFD FEFF
ENDFreeMemory(@variables)
Free memory.
Parameter Description
1 @variables VariablesExample:
my $N = V(size, 4096); # Size of the initial allocation which should be one or more pages
AllocateMemory($N, my $A = V(address));
ClearMemory($N, $A);
$A->setReg(rax);
Mov rdi, 128;
PrintOutMemoryInHexNL;
FreeMemory($N, $A); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 1, eq => <<END);
0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
ENDClearMemory(@variables)
Clear memory.
Parameter Description
1 @variables VariablesExample:
K(loop, 8+1)->for(sub
{my ($index, $start, $next, $end) = @_;
$index->setReg(r15);
Push r15;
});
Mov rax, rsp;
Mov rdi, 8*9;
PrintOutMemoryInHexNL;
ClearMemory(K(size, 8*9), V(address, rax)); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutMemoryInHexNL;
ok Assemble(debug => 0, eq => <<END);
0800 0000 0000 00000700 0000 0000 00000600 0000 0000 00000500 0000 0000 00000400 0000 0000 00000300 0000 0000 00000200 0000 0000 00000100 0000 0000 00000000 0000 0000 0000
0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
END
my $N = V(size, 4096); # Size of the initial allocation which should be one or more pages
AllocateMemory($N, my $A = V(address));
ClearMemory($N, $A); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$A->setReg(rax);
Mov rdi, 128;
PrintOutMemoryInHexNL;
FreeMemory($N, $A);
ok Assemble(debug => 1, eq => <<END);
0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
ENDMaskMemory22(@variables)
Write the specified byte into locations in the target mask that correspond to the locations in the source that contain the specified byte.
Parameter Description
1 @variables VariablesMaskMemoryInRange4_22(@variables)
Write the specified byte into locations in the target mask that correspond to the locations in the source that contain 4 bytes in the specified range.
Parameter Description
1 @variables VariablesCopyMemory(@variables)
Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi.
Parameter Description
1 @variables VariablesExample:
my $s = Rb 0; Rb 1; Rw 2; Rd 3; Rq 4;
my $t = Db 0; Db 1; Dw 2; Dd 3; Dq 4;
Vmovdqu8 xmm0, "[$s]";
Vmovdqu8 xmm1, "[$t]";
PrintOutRegisterInHex xmm0;
PrintOutRegisterInHex xmm1;
Sub rsp, 16;
Mov rax, rsp; # Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi
Mov rdi, 16;
Mov rsi, $s;
CopyMemory(V(source, rsi), V(target, rax), V(size, rdi)); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutMemoryInHex;
my $r = Assemble;
ok $r =~ m(xmm0: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(xmm1: 0000 0000 0000 0004 0000 0003 0002 0100);
ok $r =~ m(0001 0200 0300 00000400 0000 0000 0000);
my $N = 256;
my $s = Rb 0..$N-1;
AllocateMemory(K(size, $N), my $a = V(address));
CopyMemory(V(source, $s), V(size, $N), target => $a); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
AllocateMemory(K(size, $N), my $b = V(address));
CopyMemory(source => $a, target => $b, K(size, $N)); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$b->setReg(rax);
Mov rdi, $N;
PrintOutMemoryInHexNL;
ok Assemble(debug=>0, eq => <<END);
0001 0203 0405 06070809 0A0B 0C0D 0E0F1011 1213 1415 16171819 1A1B 1C1D 1E1F2021 2223 2425 26272829 2A2B 2C2D 2E2F3031 3233 3435 36373839 3A3B 3C3D 3E3F4041 4243 4445 46474849 4A4B 4C4D 4E4F5051 5253 5455 56575859 5A5B 5C5D 5E5F6061 6263 6465 66676869 6A6B 6C6D 6E6F7071 7273 7475 76777879 7A7B 7C7D 7E7F8081 8283 8485 86878889 8A8B 8C8D 8E8F9091 9293 9495 96979899 9A9B 9C9D 9E9FA0A1 A2A3 A4A5 A6A7A8A9 AAAB ACAD AEAFB0B1 B2B3 B4B5 B6B7B8B9 BABB BCBD BEBFC0C1 C2C3 C4C5 C6C7C8C9 CACB CCCD CECFD0D1 D2D3 D4D5 D6D7D8D9 DADB DCDD DEDFE0E1 E2E3 E4E5 E6E7E8E9 EAEB ECED EEEFF0F1 F2F3 F4F5 F6F7F8F9 FAFB FCFD FEFF
ENDFiles
Interact with the operating system via files.
OpenRead()
Open a file, whose name is addressed by rax, for read and return the file descriptor in rax.
Example:
Mov rax, Rs($0); # File to read
OpenRead; # Open file # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax;
CloseFile; # Close file
PrintOutRegisterInHex rax;
Mov rax, Rs(my $f = "zzzTemporaryFile.txt"); # File to write
OpenWrite; # Open file
CloseFile; # Close file
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rax: 0000 0000 0000 0000
END
ok -e $f; # Created file
unlink $f;OpenWrite()
Create the file named by the terminated string addressed by rax for write.
Example:
Mov rax, Rs($0); # File to read
OpenRead; # Open file
PrintOutRegisterInHex rax;
CloseFile; # Close file
PrintOutRegisterInHex rax;
Mov rax, Rs(my $f = "zzzTemporaryFile.txt"); # File to write
OpenWrite; # Open file # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
CloseFile; # Close file
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rax: 0000 0000 0000 0000
END
ok -e $f; # Created file
unlink $f;CloseFile()
Close the file whose descriptor is in rax.
Example:
Mov rax, Rs($0); # File to read
OpenRead; # Open file
PrintOutRegisterInHex rax;
CloseFile; # Close file # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax;
Mov rax, Rs(my $f = "zzzTemporaryFile.txt"); # File to write
OpenWrite; # Open file
CloseFile; # Close file # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 0000 0003
rax: 0000 0000 0000 0000
END
ok -e $f; # Created file
unlink $f;StatSize()
Stat a file whose name is addressed by rax to get its size in rax.
Example:
Mov rax, Rs($0); # File to stat
StatSize; # Stat the file # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex rax;
my $r = Assemble =~ s( ) ()gsr;
if ($r =~ m(rax:([0-9a-f]{16}))is) # Compare file size obtained with that from fileSize()
{is_deeply $1, sprintf("%016X", fileSize($0));
}ReadFile(@variables)
Read a file whose name is addressed by rax into memory. The address of the mapped memory and its length are returned in registers rax,rdi.
Parameter Description
1 @variables VariablesExample:
my $file = G(file, Rs($0));
my $size = G(size);
my $address = G(address);
ReadFile $file, $size, $address; # Read file # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$address->setReg(rax); # Address of file in memory
$size ->setReg(rdi); # Length of file in memory
PrintOutMemory; # Print contents of memory to stdout
my $r = Assemble; # Assemble and execute
ok stringMd5Sum($r) eq fileMd5Sum($0); # Output contains this fileexecuteFileViaBash(@variables)
Execute the file named in the arena addressed by rax with bash.
Parameter Description
1 @variables VariablesExample:
my $s = CreateArena; # Create a string
$s->ql(<<END); # Write code to execute
#!/usr/bin/bash
whoami
ls -la
pwd
END
$s->write (my $f = V('file', Rs("zzz.sh"))); # Write code to a file
executeFileViaBash($f); # Execute the file # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
unlinkFile ($f); # Delete the file
my $u = qx(whoami); chomp($u);
ok Assemble(emulator => 0) =~ m($u); # The Intel Software Development Emulator is way too slow on these operations.unlinkFile(@variables)
Unlink the named file.
Parameter Description
1 @variables VariablesExample:
my $s = CreateArena; # Create a string
$s->ql(<<END); # Write code to execute
#!/usr/bin/bash
whoami
ls -la
pwd
END
$s->write (my $f = V('file', Rs("zzz.sh"))); # Write code to a file
executeFileViaBash($f); # Execute the file
unlinkFile ($f); # Delete the file # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $u = qx(whoami); chomp($u);
ok Assemble(emulator => 0) =~ m($u); # The Intel Software Development Emulator is way too slow on these operations.Hash functions
Hash functions
Hash()
Hash a string addressed by rax with length held in rdi and return the hash code in r15.
Example:
Mov rax, "[rbp+24]";
Cstrlen; # Length of string to hash
Mov rdi, r15;
Hash(); # Hash string # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
PrintOutRegisterInHex r15;
my $e = Assemble keep=>'hash'; # Assemble to the specified file name
ok qx($e "") =~ m(r15: 0000 3F80 0000 3F80); # Test well known hashes
ok qx($e "a") =~ m(r15: 0000 3F80 C000 45B2);
if (0) # Hash various strings # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
{my %r; my %f; my $count = 0;
my $N = RegisterSize zmm0;
if (1) # Fixed blocks
{for my $l(qw(a ab abc abcd), 'a a', 'a a')
{for my $i(1..$N)
{my $t = $l x $i;
last if $N < length $t;
my $s = substr($t.(' ' x $N), 0, $N);
next if $f{$s}++;
my $r = qx($e "$s");
say STDERR "$count $r";
if ($r =~ m(^.*r15:\s*(.*)$)m)
{push $r{$1}->@*, $s;
++$count;
}
}
}
}
if (1) # Variable blocks
{for my $l(qw(a ab abc abcd), '', 'a a', 'a a')
{for my $i(1..$N)
{my $t = $l x $i;
next if $f{$t}++;
my $r = qx($e "$t");
say STDERR "$count $r";
if ($r =~ m(^.*r15:\s*(.*)$)m)
{push $r{$1}->@*, $t;
++$count;
}
}
}
}
for my $r(keys %r)
{delete $r{$r} if $r{$r}->@* < 2;
}
say STDERR dump(\%r);
say STDERR "Keys hashed: ", $count;
confess "Duplicates : ", scalar keys(%r);
}Unicode
Convert utf8 to utf32
GetNextUtf8CharAsUtf32(@parameters)
Get the next utf8 encoded character from the addressed memory and return it as a utf32 char.
Parameter Description
1 @parameters ParametersConvertUtf8ToUtf32(@parameters)
Convert a string of utf8 to an allocated block of utf32 and return its address and length.
Parameter Description
1 @parameters ParametersExample:
my @p = my ($out, $size, $fail) = (V(out), V(size), V('fail'));
my $Chars = Rb(0x24, 0xc2, 0xa2, 0xc9, 0x91, 0xE2, 0x82, 0xAC, 0xF0, 0x90, 0x8D, 0x88);
my $chars = V(chars, $Chars);
GetNextUtf8CharAsUtf32 in=>$chars, @p; # Dollar UTF-8 Encoding: 0x24 UTF-32 Encoding: 0x00000024
$out->out('out1 : '); $size->outNL(' size : ');
GetNextUtf8CharAsUtf32 in=>$chars+1, @p; # Cents UTF-8 Encoding: 0xC2 0xA2 UTF-32 Encoding: 0x000000a2
$out->out('out2 : '); $size->outNL(' size : ');
GetNextUtf8CharAsUtf32 in=>$chars+3, @p; # Alpha UTF-8 Encoding: 0xC9 0x91 UTF-32 Encoding: 0x00000251
$out->out('out3 : '); $size->outNL(' size : ');
GetNextUtf8CharAsUtf32 in=>$chars+5, @p; # Euro UTF-8 Encoding: 0xE2 0x82 0xAC UTF-32 Encoding: 0x000020AC
$out->out('out4 : '); $size->outNL(' size : ');
GetNextUtf8CharAsUtf32 in=>$chars+8, @p; # Gothic Letter Hwair UTF-8 Encoding 0xF0 0x90 0x8D 0x88 UTF-32 Encoding: 0x00010348
$out->out('out5 : '); $size->outNL(' size : ');
my $statement = qq(𝖺
𝑎𝑠𝑠𝑖𝑔𝑛 【【𝖻 𝐩𝐥𝐮𝐬 𝖼】】
AAAAAAAA); # A sample sentence to parse
my $s = K(statement, Rutf8($statement));
my $l = StringLength string => $s;
AllocateMemory($l, my $address = V(address)); # Allocate enough memory for a copy of the string
CopyMemory(source => $s, target => $address, $l);
GetNextUtf8CharAsUtf32 in=>$address, @p;
$out->out('outA : '); $size->outNL(' size : ');
GetNextUtf8CharAsUtf32 in=>$address+4, @p;
$out->out('outB : '); $size->outNL(' size : ');
GetNextUtf8CharAsUtf32 in=>$address+5, @p;
$out->out('outC : '); $size->outNL(' size : ');
GetNextUtf8CharAsUtf32 in=>$address+30, @p;
$out->out('outD : '); $size->outNL(' size : ');
GetNextUtf8CharAsUtf32 in=>$address+35, @p;
$out->out('outE : '); $size->outNL(' size : ');
$address->printOutMemoryInHexNL($l);
ok Assemble(debug => 0, eq => <<END);
out1 : 0000 0000 0000 0024 size : 0000 0000 0000 0001
out2 : 0000 0000 0000 00A2 size : 0000 0000 0000 0002
out3 : 0000 0000 0000 0251 size : 0000 0000 0000 0002
out4 : 0000 0000 0000 20AC size : 0000 0000 0000 0003
out5 : 0000 0000 0001 0348 size : 0000 0000 0000 0004
outA : 0000 0000 0001 D5BA size : 0000 0000 0000 0004
outB : 0000 0000 0000 000A size : 0000 0000 0000 0001
outC : 0000 0000 0000 0020 size : 0000 0000 0000 0001
outD : 0000 0000 0000 0020 size : 0000 0000 0000 0001
outE : 0000 0000 0000 0010 size : 0000 0000 0000 0002
F09D 96BA 0A20 F09D918E F09D 91A0 F09D91A0 F09D 9196 F09D9194 F09D 919B 20E38090 E380 90F0 9D96BB20 F09D 90A9 F09D90A5 F09D 90AE F09D90AC 20F0 9D96 BCE38091 E380 910A 41414141 4141 4141 0000
END
ClassifyInRange(@parameters)
Character classification: classify the utf32 characters in a block of memory of specified length using a range specification held in zmm0, zmm1 formatted in double words with each word in zmm1 having the classification in the highest 8 bits and with zmm0 and zmm1 having the utf32 character at the start (zmm0) and end (zmm1) of each range in the lower 21 bits. The classification bits from the first matching range are copied into the high (unused) byte of each utf32 character in the block of memory.
Parameter Description
1 @parameters ParametersClassifyWithInRange(@parameters)
Bracket classification: Classify the utf32 characters in a block of memory of specified length using a range specification held in zmm0, zmm1 formatted in double words with the classification range in the highest 8 bits of zmm0 and zmm1 and the utf32 character at the start (zmm0) and end (zmm1) of each range in the lower 21 bits. The classification bits from the position within the first matching range are copied into the high (unused) byte of each utf32 character in the block of memory.
Parameter Description
1 @parameters ParametersClassifyWithInRangeAndSaveOffset(@parameters)
Alphabetic classification: classify the utf32 characters in a block of memory of specified length using a range specification held in zmm0, zmm1 formatted in double words with the classification code in the high byte of zmm1 and the offset of the first element in the range in the high byte of zmm0. The lowest 21 bits of each double word in zmm0 and zmm1 contain the utf32 characters marking the start and end of each range. The classification bits from zmm1 for the first matching range are copied into the high byte of each utf32 character in the block of memory. The offset in the range is copied into the lowest byte of each utf32 character in the block of memory. The middle two bytes are cleared. The net effect is to reduce 21 bits of utf32 to 16 bits.
Parameter Description
1 @parameters ParametersShort Strings
Operations on Short Strings
CreateShortString($zmm)
Create a description of a short string.
Parameter Description
1 $zmm Numbered zmm containing the stringExample:
my $s = CreateShortString(0); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $d = Rb(1..63);
$s->load(K(address, $d), K(size, 9));
PrintOutRegisterInHex xmm0;
$s->len->outNL;
$s->setLength(K(size, 7));
PrintOutRegisterInHex xmm0;
$s->append($s);
PrintOutRegisterInHex ymm0;
$s->appendByte(K(append,0xFF));
PrintOutRegisterInHex ymm0;
ok Assemble(debug => 0, trace => 0, eq => <<END);
xmm0: 0000 0000 0000 0908 0706 0504 0302 0109
size: 0000 0000 0000 0009
xmm0: 0000 0000 0000 0908 0706 0504 0302 0107
ymm0: 0000 0000 0000 0000 0000 0000 0000 0000 0007 0605 0403 0201 0706 0504 0302 010E
ymm0: 0000 0000 0000 0000 0000 0000 0000 0000 FF07 0605 0403 0201 0706 0504 0302 010F
ENDNasm::X86::ShortString::clear($string)
Clear a short string.
Parameter Description
1 $string StringNasm::X86::ShortString::load($string, $address, $length)
Load the variable addressed data with the variable length into the short string.
Parameter Description
1 $string String
2 $address Address
3 $length LengthExample:
my $s = CreateShortString(0);
my $d = Rb(1..63);
$s->load(K(address, $d), K(size, 9));
PrintOutRegisterInHex xmm0;
$s->len->outNL;
$s->setLength(K(size, 7));
PrintOutRegisterInHex xmm0;
$s->append($s);
PrintOutRegisterInHex ymm0;
$s->appendByte(K(append,0xFF));
PrintOutRegisterInHex ymm0;
ok Assemble(debug => 0, trace => 0, eq => <<END);
xmm0: 0000 0000 0000 0908 0706 0504 0302 0109
size: 0000 0000 0000 0009
xmm0: 0000 0000 0000 0908 0706 0504 0302 0107
ymm0: 0000 0000 0000 0000 0000 0000 0000 0000 0007 0605 0403 0201 0706 0504 0302 010E
ymm0: 0000 0000 0000 0000 0000 0000 0000 0000 FF07 0605 0403 0201 0706 0504 0302 010F
ENDNasm::X86::ShortString::loadDwordBytes($string, $byte, $address, $length)
Load the specified byte of each dword in the variable addressed data with the variable length into the short string.
Parameter Description
1 $string String
2 $byte Byte offset 0-3
3 $address Variable address
4 $length Variable lengthNasm::X86::ShortString::len($string)
Return the length of a short string in a variable.
Parameter Description
1 $string StringNasm::X86::ShortString::setLength($string, $length)
Set the length of the short string.
Parameter Description
1 $string String
2 $length Variable sizeExample:
my $s = CreateShortString(0);
my $d = Rb(1..63);
$s->load(K(address, $d), K(size, 9));
PrintOutRegisterInHex xmm0;
$s->len->outNL;
$s->setLength(K(size, 7));
PrintOutRegisterInHex xmm0;
$s->append($s);
PrintOutRegisterInHex ymm0;
$s->appendByte(K(append,0xFF));
PrintOutRegisterInHex ymm0;
ok Assemble(debug => 0, trace => 0, eq => <<END);
xmm0: 0000 0000 0000 0908 0706 0504 0302 0109
size: 0000 0000 0000 0009
xmm0: 0000 0000 0000 0908 0706 0504 0302 0107
ymm0: 0000 0000 0000 0000 0000 0000 0000 0000 0007 0605 0403 0201 0706 0504 0302 010E
ymm0: 0000 0000 0000 0000 0000 0000 0000 0000 FF07 0605 0403 0201 0706 0504 0302 010F
ENDNasm::X86::ShortString::appendByte($string, $char)
Append the lowest variable byte to the specified string.
Parameter Description
1 $string String
2 $char Variable byteNasm::X86::ShortString::append($left, $right)
Append the right hand short string to the left hand short string.
Parameter Description
1 $left Target zmm
2 $right Source zmmExample:
my $s = CreateShortString(0);
my $d = Rb(1..63);
$s->load(K(address, $d), K(size, 9));
PrintOutRegisterInHex xmm0;
$s->len->outNL;
$s->setLength(K(size, 7));
PrintOutRegisterInHex xmm0;
$s->append($s);
PrintOutRegisterInHex ymm0;
$s->appendByte(K(append,0xFF));
PrintOutRegisterInHex ymm0;
ok Assemble(debug => 0, trace => 0, eq => <<END);
xmm0: 0000 0000 0000 0908 0706 0504 0302 0109
size: 0000 0000 0000 0009
xmm0: 0000 0000 0000 0908 0706 0504 0302 0107
ymm0: 0000 0000 0000 0000 0000 0000 0000 0000 0007 0605 0403 0201 0706 0504 0302 010E
ymm0: 0000 0000 0000 0000 0000 0000 0000 0000 FF07 0605 0403 0201 0706 0504 0302 010F
ENDArenas
An arena is single extensible block of memory which contains other data structures such as strings, arrays, trees within it.
StringLength(@parameters)
Length of a zero terminated string.
Parameter Description
1 @parameters ParametersExample:
StringLength(V(string, Rs("abcd")))->outNL; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Assemble(debug => 0, eq => <<END);
size: 0000 0000 0000 0004
ENDCreateArena(%options)
Create an relocatable arena and returns its address in rax. Optionally add a chain header so that 64 byte blocks of memory can be freed and reused within the arena.
Parameter Description
1 %options Free=>1 adds a free chain.Example:
my $a = CreateArena; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$a->q('aa');
$a->out;
PrintOutNL;
ok Assemble(debug => 0, eq => <<END);
aa
END
my $a = CreateArena; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $b = CreateArena; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$a->q('aa');
$b->q('bb');
$a->out;
PrintOutNL;
$b->out;
PrintOutNL;
ok Assemble(debug => 0, eq => <<END);
aa
bb
END
my $a = CreateArena; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $b = CreateArena; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$a->q('aa');
$a->q('AA');
$a->out;
PrintOutNL;
ok Assemble(debug => 0, eq => <<END);
aaAA
END
my $a = CreateArena; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
my $b = CreateArena; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$a->q('aa');
$b->q('bb');
$a->q('AA');
$b->q('BB');
$a->q('aa');
$b->q('bb');
$a->out;
$b->out;
PrintOutNL;
ok Assemble(debug => 0, eq => <<END);
aaAAaabbBBbb
END
my $a = CreateArena; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$a->q('ab');
my $b = CreateArena; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
$b->append(source=>$a->bs);
$b->append(source=>$a->bs);
$a->append(source=>$b->bs);
$b->append(source=>$a->bs);
$a->append(source=>$b->bs);
$b->append(source=>$a->bs);
$b->append(source=>$a->bs);
$b->append(source=>$a->bs);
$b->append(source=>$a->bs);
$a->out; PrintOutNL; # Print arena
$b->out; PrintOutNL; # Print arena
$a->length(my $sa = V(size)); $sa->outNL;
$b->length(my $sb = V(size)); $sb->outNL;
$a->clear;
$a->length(my $sA = V(size)); $sA->outNL;
$b->length(my $sB = V(size)); $sB->outNL;
ok Assemble(debug => 0, eq => <<END);
abababababababab
ababababababababababababababababababababababababababababababababababababab
size: 0000 0000 0000 0010
size: 0000 0000 0000 004A
size: 0000 0000 0000 0000
size: 0000 0000 0000 004A
ENDNasm::X86::Arena::length($arena, @variables)
Get the length of an arena.
Parameter Description
1 $arena Arena descriptor
2 @variables VariablesNasm::X86::Arena::arenaSize($arena, @variables)
Get the size of an arena.
Parameter Description
1 $arena Arena descriptor
2 @variables VariablesNasm::X86::Arena::makeReadOnly($arena)
Make an arena read only.
Parameter Description
1 $arena Arena descriptorNasm::X86::Arena::makeWriteable($arena)
Make an arena writable.
Parameter Description
1 $arena Arena descriptorNasm::X86::Arena::allocate($arena, @variables)
Allocate the amount of space indicated in rdi in the arena addressed by rax and return the offset of the allocation in the arena in rdi.
Parameter Description
1 $arena Arena descriptor
2 @variables VariablesNasm::X86::Arena::allocZmmBlock($arena, @variables)
Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
Parameter Description
1 $arena Arena
2 @variables VariablesNasm::X86::Arena::allocBlock($arena, $bs)
Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
Parameter Description
1 $arena Arena
2 $bs Address of arenaExample:
my $a = CreateArena; $a->dump;
my $b1 = $a->allocBlock($a->bs); $a->dump;
my $b2 = $a->allocBlock($a->bs); $a->dump;
$a->freeBlock($b2); $a->dump;
$a->freeBlock($b1); $a->dump;
ok Assemble(debug => 0, eq => <<END);
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0018
0000: 0010 0000 0000 00001800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0058
0000: 0010 0000 0000 00005800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0098
0000: 0010 0000 0000 00009800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0098
0000: 0010 0000 0000 00009800 0000 0000 00005800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0098
0000: 0010 0000 0000 00009800 0000 0000 00001800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 5800 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
ENDNasm::X86::Arena::m($arena, @variables)
Append the content with length rdi addressed by rsi to the arena addressed by rax.
Parameter Description
1 $arena Arena descriptor
2 @variables VariablesNasm::X86::Arena::q($arena, $string)
Append a constant string to the arena.
Parameter Description
1 $arena Arena descriptor
2 $string StringNasm::X86::Arena::ql($arena, $const)
Append a quoted string containing new line characters to the arena addressed by rax.
Parameter Description
1 $arena Arena
2 $const ConstantNasm::X86::Arena::char($arena, $char)
Append a character expressed as a decimal number to the arena addressed by rax.
Parameter Description
1 $arena Arena descriptor
2 $char Number of character to be appendedNasm::X86::Arena::nl($arena)
Append a new line to the arena addressed by rax.
Parameter Description
1 $arena Arena descriptorNasm::X86::Arena::z($arena)
Append a trailing zero to the arena addressed by rax.
Parameter Description
1 $arena Arena descriptorNasm::X86::Arena::append($arena, @variables)
Append one arena to another.
Parameter Description
1 $arena Arena descriptor
2 @variables VariablesNasm::X86::Arena::clear($arena)
Clear the arena addressed by rax.
Parameter Description
1 $arena Arena descriptorNasm::X86::Arena::write($arena, @variables)
Write the content in an arena addressed by rax to a temporary file and replace the arena content with the name of the temporary file.
Parameter Description
1 $arena Arena descriptor
2 @variables VariablesNasm::X86::Arena::read($arena, @variables)
Read the named file (terminated with a zero byte) and place it into the named arena.
Parameter Description
1 $arena Arena descriptor
2 @variables VariablesNasm::X86::Arena::out($arena)
Print the specified arena addressed by rax on sysout.
Parameter Description
1 $arena Arena descriptorNasm::X86::Arena::dump($arena, $depth)
Dump details of an arena.
Parameter Description
1 $arena Arena descriptor
2 $depth Optional amount of memory to dump as the number of 64 byte blocksString
Strings made from zmm sized blocks of text
Nasm::X86::Arena::DescribeString($arena)
Describe a string.
Parameter Description
1 $arena Arena descriptionNasm::X86::Arena::CreateString($arena)
Create a string from a doubly link linked list of 64 byte blocks linked via 4 byte offsets in an arena and return its descriptor.
Parameter Description
1 $arena Arena descriptionNasm::X86::String::dump($String)
Dump a string to sysout.
Parameter Description
1 $String String descriptorNasm::X86::String::len($String, $bs, $first)
Find the length of a string.
Parameter Description
1 $String String descriptor
2 $bs Optional arena address
3 $first Offset of first blockExample:
my $c = Rb(0..255);
my $S = CreateArena; my $s = $S->CreateString;
$s->append(source=>V(source, $c), V(size, 165)); $s->dump;
$s->deleteChar(V(position, 0x44)); $s->dump;
$s->len->outNL;
ok Assemble(debug => 0, eq => <<END);
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0037
zmm31: 0000 0058 0000 0098 3635 3433 3231 302F 2E2D 2C2B 2A29 2827 2625 2423 2221 201F 1E1D 1C1B 1A19 1817 1615 1413 1211 100F 0E0D 0C0B 0A09 0807 0605 0403 0201 0037
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0037
zmm31: 0000 0098 0000 0018 6D6C 6B6A 6968 6766 6564 6362 6160 5F5E 5D5C 5B5A 5958 5756 5554 5352 5150 4F4E 4D4C 4B4A 4948 4746 4544 4342 4140 3F3E 3D3C 3B3A 3938 3737
Offset: 0000 0000 0000 0098 Length: 0000 0000 0000 0037
zmm31: 0000 0018 0000 0058 A4A3 A2A1 A09F 9E9D 9C9B 9A99 9897 9695 9493 9291 908F 8E8D 8C8B 8A89 8887 8685 8483 8281 807F 7E7D 7C7B 7A79 7877 7675 7473 7271 706F 6E37
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0037
zmm31: 0000 0058 0000 0098 3635 3433 3231 302F 2E2D 2C2B 2A29 2827 2625 2423 2221 201F 1E1D 1C1B 1A19 1817 1615 1413 1211 100F 0E0D 0C0B 0A09 0807 0605 0403 0201 0037
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0036
zmm31: 0000 0098 0000 0018 186D 6C6B 6A69 6867 6665 6463 6261 605F 5E5D 5C5B 5A59 5857 5655 5453 5251 504F 4E4D 4C4B 4A49 4847 4645 4342 4140 3F3E 3D3C 3B3A 3938 3736
Offset: 0000 0000 0000 0098 Length: 0000 0000 0000 0037
zmm31: 0000 0018 0000 0058 A4A3 A2A1 A09F 9E9D 9C9B 9A99 9897 9695 9493 9291 908F 8E8D 8C8B 8A89 8887 8685 8483 8281 807F 7E7D 7C7B 7A79 7877 7675 7473 7271 706F 6E37
size: 0000 0000 0000 00A4
ENDNasm::X86::String::concatenate($target, $source)
Concatenate two strings by appending a copy of the source to the target string.
Parameter Description
1 $target Target string
2 $source Source stringNasm::X86::String::insertChar($String, @variables)
Insert a character into a string.
Parameter Description
1 $String String
2 @variables VariablesExample:
my $c = Rb(0..255);
my $S = CreateArena;
my $s = $S->CreateString;
$s->append(source=>V(source, $c), K(size, 54)); $s->dump;
$s->insertChar(V(character, 0x77), K(position, 4)); $s->dump;
$s->insertChar(V(character, 0x88), K(position, 5)); $s->dump;
$s->insertChar(V(character, 0x99), K(position, 6)); $s->dump;
$s->insertChar(V(character, 0xAA), K(position, 7)); $s->dump;
$s->insertChar(V(character, 0xBB), K(position, 8)); $s->dump;
$s->insertChar(V(character, 0xCC), K(position, 9)); $s->dump;
$s->insertChar(V(character, 0xDD), K(position, 10)); $s->dump;
$s->insertChar(V(character, 0xEE), K(position, 11)); $s->dump;
$s->insertChar(V(character, 0xFF), K(position, 12)); $s->dump;
ok Assemble(debug => 0, eq => <<END);
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0036
zmm31: 0000 0018 0000 0018 0035 3433 3231 302F 2E2D 2C2B 2A29 2827 2625 2423 2221 201F 1E1D 1C1B 1A19 1817 1615 1413 1211 100F 0E0D 0C0B 0A09 0807 0605 0403 0201 0036
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0037
zmm31: 0000 0018 0000 0018 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 7703 0201 0037
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0005
zmm31: 0000 0058 0000 0058 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 7703 0201 0005
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0033
zmm31: 0000 0018 0000 0018 0000 0018 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 8833
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0005
zmm31: 0000 0058 0000 0058 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 7703 0201 0005
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0034
zmm31: 0000 0018 0000 0018 0000 0035 3433 3231 302F 2E2D 2C2B 2A29 2827 2625 2423 2221 201F 1E1D 1C1B 1A19 1817 1615 1413 1211 100F 0E0D 0C0B 0A09 0807 0605 0499 8834
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0005
zmm31: 0000 0058 0000 0058 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 7703 0201 0005
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0035
zmm31: 0000 0018 0000 0018 0000 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 AA99 8835
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0005
zmm31: 0000 0058 0000 0058 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 7703 0201 0005
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0036
zmm31: 0000 0018 0000 0018 0035 3433 3231 302F 2E2D 2C2B 2A29 2827 2625 2423 2221 201F 1E1D 1C1B 1A19 1817 1615 1413 1211 100F 0E0D 0C0B 0A09 0807 0605 04BB AA99 8836
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0005
zmm31: 0000 0058 0000 0058 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 7703 0201 0005
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0037
zmm31: 0000 0018 0000 0018 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 CCBB AA99 8837
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0005
zmm31: 0000 0058 0000 0058 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 7703 0201 0005
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0005
zmm31: 0000 0098 0000 0098 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 CCBB AA99 8805
Offset: 0000 0000 0000 0098 Length: 0000 0000 0000 0033
zmm31: 0000 0018 0000 0018 0000 0018 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 DD33
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0005
zmm31: 0000 0058 0000 0058 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 7703 0201 0005
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0005
zmm31: 0000 0098 0000 0098 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 CCBB AA99 8805
Offset: 0000 0000 0000 0098 Length: 0000 0000 0000 0034
zmm31: 0000 0018 0000 0018 0000 0035 3433 3231 302F 2E2D 2C2B 2A29 2827 2625 2423 2221 201F 1E1D 1C1B 1A19 1817 1615 1413 1211 100F 0E0D 0C0B 0A09 0807 0605 04EE DD34
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0005
zmm31: 0000 0058 0000 0058 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 7703 0201 0005
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0005
zmm31: 0000 0098 0000 0098 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 CCBB AA99 8805
Offset: 0000 0000 0000 0098 Length: 0000 0000 0000 0035
zmm31: 0000 0018 0000 0018 0000 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 FFEE DD35
ENDNasm::X86::String::deleteChar($String, @variables)
Delete a character in a string.
Parameter Description
1 $String String
2 @variables VariablesExample:
my $c = Rb(0..255);
my $S = CreateArena; my $s = $S->CreateString;
$s->append(source=>V(source, $c), V(size, 165)); $s->dump;
$s->deleteChar(V(position, 0x44)); $s->dump;
$s->len->outNL;
ok Assemble(debug => 0, eq => <<END);
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0037
zmm31: 0000 0058 0000 0098 3635 3433 3231 302F 2E2D 2C2B 2A29 2827 2625 2423 2221 201F 1E1D 1C1B 1A19 1817 1615 1413 1211 100F 0E0D 0C0B 0A09 0807 0605 0403 0201 0037
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0037
zmm31: 0000 0098 0000 0018 6D6C 6B6A 6968 6766 6564 6362 6160 5F5E 5D5C 5B5A 5958 5756 5554 5352 5150 4F4E 4D4C 4B4A 4948 4746 4544 4342 4140 3F3E 3D3C 3B3A 3938 3737
Offset: 0000 0000 0000 0098 Length: 0000 0000 0000 0037
zmm31: 0000 0018 0000 0058 A4A3 A2A1 A09F 9E9D 9C9B 9A99 9897 9695 9493 9291 908F 8E8D 8C8B 8A89 8887 8685 8483 8281 807F 7E7D 7C7B 7A79 7877 7675 7473 7271 706F 6E37
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0037
zmm31: 0000 0058 0000 0098 3635 3433 3231 302F 2E2D 2C2B 2A29 2827 2625 2423 2221 201F 1E1D 1C1B 1A19 1817 1615 1413 1211 100F 0E0D 0C0B 0A09 0807 0605 0403 0201 0037
Offset: 0000 0000 0000 0058 Length: 0000 0000 0000 0036
zmm31: 0000 0098 0000 0018 186D 6C6B 6A69 6867 6665 6463 6261 605F 5E5D 5C5B 5A59 5857 5655 5453 5251 504F 4E4D 4C4B 4A49 4847 4645 4342 4140 3F3E 3D3C 3B3A 3938 3736
Offset: 0000 0000 0000 0098 Length: 0000 0000 0000 0037
zmm31: 0000 0018 0000 0058 A4A3 A2A1 A09F 9E9D 9C9B 9A99 9897 9695 9493 9291 908F 8E8D 8C8B 8A89 8887 8685 8483 8281 807F 7E7D 7C7B 7A79 7877 7675 7473 7271 706F 6E37
size: 0000 0000 0000 00A4
ENDNasm::X86::String::getCharacter($String, @variables)
Get a character from a string.
Parameter Description
1 $String String
2 @variables VariablesNasm::X86::String::append($String, @variables)
Append the specified content in memory to the specified string.
Parameter Description
1 $String String descriptor
2 @variables VariablesNasm::X86::String::appendShortString($string, $short)
Append the content of the specified short string.
Parameter Description
1 $string String descriptor
2 $short Short stringExample:
my $a = CreateArena;
my $S = $a->CreateString;
my $s = CreateShortString(0);
my $d = Rb(1..63);
$s->load(K(address, $d), K(size, 9));
$s->append($s);
$S->appendShortString($s);
$S->dump;
ok Assemble(debug => 0, trace => 0, eq => <<END);
string Dump
Offset: 0000 0000 0000 0018 Length: 0000 0000 0000 0012
zmm31: 0000 0018 0000 0018 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0009 0807 0605 0403 0201 0908 0706 0504 0302 0112
END
my $a = CreateArena;
my $t = $a->CreateTree;
my $s = CreateShortString(0);
my $d = Rb(1..63);
$s->load(K(address, $d), K(size, 9));
$t->insertShortString($s, K(data,42));
$t->dump;
ok Assemble(debug => 0, trace => 0, eq => <<END);
Tree at: 0000 0000 0000 0018 length: 0000 0000 0000 0001
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0002 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0098
0000 0058 0001 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0403 0201
index: 0000 0000 0000 0000 key: 0000 0000 0403 0201 data: 0000 0000 0000 0098 subTree
Tree at: 0000 0000 0000 0098 length: 0000 0000 0000 0001
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0002 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0118
0000 00D8 0001 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0807 0605
index: 0000 0000 0000 0000 key: 0000 0000 0807 0605 data: 0000 0000 0000 0118 subTree
Tree at: 0000 0000 0000 0118 length: 0000 0000 0000 0001
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0002 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 002A
0000 0158 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0009
index: 0000 0000 0000 0000 key: 0000 0000 0000 0009 data: 0000 0000 0000 002A
end
end
end
ENDNasm::X86::String::saveToShortString($string, $short, $first)
Place as much as possible of the specified string into the specified short string.
Parameter Description
1 $string String descriptor
2 $short Short string descriptor
3 $first Optional offset to first block of stringNasm::X86::String::clear($String)
Clear the block by freeing all but the first block.
Parameter Description
1 $String String descriptorArray
Array constructed as a set of blocks in an arena
Nasm::X86::Arena::CreateArray($arena)
Create a array in an arena.
Parameter Description
1 $arena Arena descriptionNasm::X86::Array::dump($Array, @variables)
Dump a array.
Parameter Description
1 $Array Array descriptor
2 @variables VariablesNasm::X86::Array::push($Array, @variables)
Push an element onto the array.
Parameter Description
1 $Array Array descriptor
2 @variables VariablesExample:
my $c = Rb(0..255);
my $A = CreateArena; my $a = $A->CreateArray;
my $l = V(limit, 15);
my $L = $l + 5;
my sub put # Put a constant or a variable
{my ($e) = @_;
$a->push(element => (ref($e) ? $e : V($e, $e)));
};
my sub get # Get a constant or a variable
{my ($i) = @_;
$a->get(index=>(my $v = ref($i) ? $i : K('index', $i)), my $e = V(element));
$v->out("index: ", " "); $e->outNL;
};
$l->for(sub # Loop to the limit pushing
{my ($index, $start, $next, $end) = @_;
put($index+1);
});
$l->for(sub # Loop to the limit getting
{my ($index, $start, $next, $end) = @_;
get($index);
});
put(16);
get(15);
$L->for(sub
{my ($index, $start, $next, $end) = @_;
put($index+$l+2);
});
$L->for(sub
{my ($index, $start, $next, $end) = @_;
get($index + $l + 1);
});
if (1)
{$a->put(my $i = V('index', 9), my $e = V(element, 0xFFF9));
get(9);
}
if (1)
{$a->put(my $i = V('index', 19), my $e = V(element, 0xEEE9));
get(19);
}
($l+$L+1)->for(sub
{my ($i, $start, $next, $end) = @_;
$a->pop(my $e = V(element));
$e->outNL;
});
V(limit, 38)->for(sub # Push using a loop and reusing the freed space
{my ($index, $start, $next, $end) = @_;
$a->push(element=>$index*2);
});
V(limit, 38)->for(sub # Push using a loop and reusing the freed space
{my ($index, $start, $next, $end) = @_;
$a->pop(my $e = V(element));
$e->outNL;
});
$a->dump;
ok Assemble(debug => 0, eq => <<END);
index: 0000 0000 0000 0000 element: 0000 0000 0000 0001
index: 0000 0000 0000 0001 element: 0000 0000 0000 0002
index: 0000 0000 0000 0002 element: 0000 0000 0000 0003
index: 0000 0000 0000 0003 element: 0000 0000 0000 0004
index: 0000 0000 0000 0004 element: 0000 0000 0000 0005
index: 0000 0000 0000 0005 element: 0000 0000 0000 0006
index: 0000 0000 0000 0006 element: 0000 0000 0000 0007
index: 0000 0000 0000 0007 element: 0000 0000 0000 0008
index: 0000 0000 0000 0008 element: 0000 0000 0000 0009
index: 0000 0000 0000 0009 element: 0000 0000 0000 000A
index: 0000 0000 0000 000A element: 0000 0000 0000 000B
index: 0000 0000 0000 000B element: 0000 0000 0000 000C
index: 0000 0000 0000 000C element: 0000 0000 0000 000D
index: 0000 0000 0000 000D element: 0000 0000 0000 000E
index: 0000 0000 0000 000E element: 0000 0000 0000 000F
index: 0000 0000 0000 000F element: 0000 0000 0000 0010
index: 0000 0000 0000 0010 element: 0000 0000 0000 0011
index: 0000 0000 0000 0011 element: 0000 0000 0000 0012
index: 0000 0000 0000 0012 element: 0000 0000 0000 0013
index: 0000 0000 0000 0013 element: 0000 0000 0000 0014
index: 0000 0000 0000 0014 element: 0000 0000 0000 0015
index: 0000 0000 0000 0015 element: 0000 0000 0000 0016
index: 0000 0000 0000 0016 element: 0000 0000 0000 0017
index: 0000 0000 0000 0017 element: 0000 0000 0000 0018
index: 0000 0000 0000 0018 element: 0000 0000 0000 0019
index: 0000 0000 0000 0019 element: 0000 0000 0000 001A
index: 0000 0000 0000 001A element: 0000 0000 0000 001B
index: 0000 0000 0000 001B element: 0000 0000 0000 001C
index: 0000 0000 0000 001C element: 0000 0000 0000 001D
index: 0000 0000 0000 001D element: 0000 0000 0000 001E
index: 0000 0000 0000 001E element: 0000 0000 0000 001F
index: 0000 0000 0000 001F element: 0000 0000 0000 0020
index: 0000 0000 0000 0020 element: 0000 0000 0000 0021
index: 0000 0000 0000 0021 element: 0000 0000 0000 0022
index: 0000 0000 0000 0022 element: 0000 0000 0000 0023
index: 0000 0000 0000 0023 element: 0000 0000 0000 0024
index: 0000 0000 0000 0009 element: 0000 0000 0000 FFF9
index: 0000 0000 0000 0013 element: 0000 0000 0000 EEE9
element: 0000 0000 0000 0024
element: 0000 0000 0000 0023
element: 0000 0000 0000 0022
element: 0000 0000 0000 0021
element: 0000 0000 0000 0020
element: 0000 0000 0000 001F
element: 0000 0000 0000 001E
element: 0000 0000 0000 001D
element: 0000 0000 0000 001C
element: 0000 0000 0000 001B
element: 0000 0000 0000 001A
element: 0000 0000 0000 0019
element: 0000 0000 0000 0018
element: 0000 0000 0000 0017
element: 0000 0000 0000 0016
element: 0000 0000 0000 0015
element: 0000 0000 0000 EEE9
element: 0000 0000 0000 0013
element: 0000 0000 0000 0012
element: 0000 0000 0000 0011
element: 0000 0000 0000 0010
element: 0000 0000 0000 000F
element: 0000 0000 0000 000E
element: 0000 0000 0000 000D
element: 0000 0000 0000 000C
element: 0000 0000 0000 000B
element: 0000 0000 0000 FFF9
element: 0000 0000 0000 0009
element: 0000 0000 0000 0008
element: 0000 0000 0000 0007
element: 0000 0000 0000 0006
element: 0000 0000 0000 0005
element: 0000 0000 0000 0004
element: 0000 0000 0000 0003
element: 0000 0000 0000 0002
element: 0000 0000 0000 0001
element: 0000 0000 0000 004A
element: 0000 0000 0000 0048
element: 0000 0000 0000 0046
element: 0000 0000 0000 0044
element: 0000 0000 0000 0042
element: 0000 0000 0000 0040
element: 0000 0000 0000 003E
element: 0000 0000 0000 003C
element: 0000 0000 0000 003A
element: 0000 0000 0000 0038
element: 0000 0000 0000 0036
element: 0000 0000 0000 0034
element: 0000 0000 0000 0032
element: 0000 0000 0000 0030
element: 0000 0000 0000 002E
element: 0000 0000 0000 002C
element: 0000 0000 0000 002A
element: 0000 0000 0000 0028
element: 0000 0000 0000 0026
element: 0000 0000 0000 0024
element: 0000 0000 0000 0022
element: 0000 0000 0000 0020
element: 0000 0000 0000 001E
element: 0000 0000 0000 001C
element: 0000 0000 0000 001A
element: 0000 0000 0000 0018
element: 0000 0000 0000 0016
element: 0000 0000 0000 0014
element: 0000 0000 0000 0012
element: 0000 0000 0000 0010
element: 0000 0000 0000 000E
element: 0000 0000 0000 000C
element: 0000 0000 0000 000A
element: 0000 0000 0000 0008
element: 0000 0000 0000 0006
element: 0000 0000 0000 0004
element: 0000 0000 0000 0002
element: 0000 0000 0000 0000
array
Size: 0000 0000 0000 0000 zmm31: 0000 001C 0000 001A 0000 0018 0000 0016 0000 0014 0000 0012 0000 0010 0000 000E 0000 000C 0000 000A 0000 0008 0000 0006 0000 0004 0000 0002 0000 0000 0000 0000
END
my $c = Rb(0..255);
my $A = CreateArena; my $a = $A->CreateArray;
my sub put
{my ($e) = @_;
$a->push(element => V($e, $e));
};
my sub get
{my ($i) = @_; # Parameters
$a->get(my $v = V('index', $i), my $e = V(element));
$v->out; PrintOutString " "; $e->outNL;
};
put($_) for 1..15; get(15);
ok Assemble(debug => 2, eq => <<END);
Index out of bounds on get from array, Index: 0000 0000 0000 000F Size: 0000 0000 0000 000F
ENDNasm::X86::Array::pop($Array, @variables)
Pop an element from an array.
Parameter Description
1 $Array Array descriptor
2 @variables VariablesExample:
my $c = Rb(0..255);
my $A = CreateArena; my $a = $A->CreateArray;
my $l = V(limit, 15);
my $L = $l + 5;
my sub put # Put a constant or a variable
{my ($e) = @_;
$a->push(element => (ref($e) ? $e : V($e, $e)));
};
my sub get # Get a constant or a variable
{my ($i) = @_;
$a->get(index=>(my $v = ref($i) ? $i : K('index', $i)), my $e = V(element));
$v->out("index: ", " "); $e->outNL;
};
$l->for(sub # Loop to the limit pushing
{my ($index, $start, $next, $end) = @_;
put($index+1);
});
$l->for(sub # Loop to the limit getting
{my ($index, $start, $next, $end) = @_;
get($index);
});
put(16);
get(15);
$L->for(sub
{my ($index, $start, $next, $end) = @_;
put($index+$l+2);
});
$L->for(sub
{my ($index, $start, $next, $end) = @_;
get($index + $l + 1);
});
if (1)
{$a->put(my $i = V('index', 9), my $e = V(element, 0xFFF9));
get(9);
}
if (1)
{$a->put(my $i = V('index', 19), my $e = V(element, 0xEEE9));
get(19);
}
($l+$L+1)->for(sub
{my ($i, $start, $next, $end) = @_;
$a->pop(my $e = V(element));
$e->outNL;
});
V(limit, 38)->for(sub # Push using a loop and reusing the freed space
{my ($index, $start, $next, $end) = @_;
$a->push(element=>$index*2);
});
V(limit, 38)->for(sub # Push using a loop and reusing the freed space
{my ($index, $start, $next, $end) = @_;
$a->pop(my $e = V(element));
$e->outNL;
});
$a->dump;
ok Assemble(debug => 0, eq => <<END);
index: 0000 0000 0000 0000 element: 0000 0000 0000 0001
index: 0000 0000 0000 0001 element: 0000 0000 0000 0002
index: 0000 0000 0000 0002 element: 0000 0000 0000 0003
index: 0000 0000 0000 0003 element: 0000 0000 0000 0004
index: 0000 0000 0000 0004 element: 0000 0000 0000 0005
index: 0000 0000 0000 0005 element: 0000 0000 0000 0006
index: 0000 0000 0000 0006 element: 0000 0000 0000 0007
index: 0000 0000 0000 0007 element: 0000 0000 0000 0008
index: 0000 0000 0000 0008 element: 0000 0000 0000 0009
index: 0000 0000 0000 0009 element: 0000 0000 0000 000A
index: 0000 0000 0000 000A element: 0000 0000 0000 000B
index: 0000 0000 0000 000B element: 0000 0000 0000 000C
index: 0000 0000 0000 000C element: 0000 0000 0000 000D
index: 0000 0000 0000 000D element: 0000 0000 0000 000E
index: 0000 0000 0000 000E element: 0000 0000 0000 000F
index: 0000 0000 0000 000F element: 0000 0000 0000 0010
index: 0000 0000 0000 0010 element: 0000 0000 0000 0011
index: 0000 0000 0000 0011 element: 0000 0000 0000 0012
index: 0000 0000 0000 0012 element: 0000 0000 0000 0013
index: 0000 0000 0000 0013 element: 0000 0000 0000 0014
index: 0000 0000 0000 0014 element: 0000 0000 0000 0015
index: 0000 0000 0000 0015 element: 0000 0000 0000 0016
index: 0000 0000 0000 0016 element: 0000 0000 0000 0017
index: 0000 0000 0000 0017 element: 0000 0000 0000 0018
index: 0000 0000 0000 0018 element: 0000 0000 0000 0019
index: 0000 0000 0000 0019 element: 0000 0000 0000 001A
index: 0000 0000 0000 001A element: 0000 0000 0000 001B
index: 0000 0000 0000 001B element: 0000 0000 0000 001C
index: 0000 0000 0000 001C element: 0000 0000 0000 001D
index: 0000 0000 0000 001D element: 0000 0000 0000 001E
index: 0000 0000 0000 001E element: 0000 0000 0000 001F
index: 0000 0000 0000 001F element: 0000 0000 0000 0020
index: 0000 0000 0000 0020 element: 0000 0000 0000 0021
index: 0000 0000 0000 0021 element: 0000 0000 0000 0022
index: 0000 0000 0000 0022 element: 0000 0000 0000 0023
index: 0000 0000 0000 0023 element: 0000 0000 0000 0024
index: 0000 0000 0000 0009 element: 0000 0000 0000 FFF9
index: 0000 0000 0000 0013 element: 0000 0000 0000 EEE9
element: 0000 0000 0000 0024
element: 0000 0000 0000 0023
element: 0000 0000 0000 0022
element: 0000 0000 0000 0021
element: 0000 0000 0000 0020
element: 0000 0000 0000 001F
element: 0000 0000 0000 001E
element: 0000 0000 0000 001D
element: 0000 0000 0000 001C
element: 0000 0000 0000 001B
element: 0000 0000 0000 001A
element: 0000 0000 0000 0019
element: 0000 0000 0000 0018
element: 0000 0000 0000 0017
element: 0000 0000 0000 0016
element: 0000 0000 0000 0015
element: 0000 0000 0000 EEE9
element: 0000 0000 0000 0013
element: 0000 0000 0000 0012
element: 0000 0000 0000 0011
element: 0000 0000 0000 0010
element: 0000 0000 0000 000F
element: 0000 0000 0000 000E
element: 0000 0000 0000 000D
element: 0000 0000 0000 000C
element: 0000 0000 0000 000B
element: 0000 0000 0000 FFF9
element: 0000 0000 0000 0009
element: 0000 0000 0000 0008
element: 0000 0000 0000 0007
element: 0000 0000 0000 0006
element: 0000 0000 0000 0005
element: 0000 0000 0000 0004
element: 0000 0000 0000 0003
element: 0000 0000 0000 0002
element: 0000 0000 0000 0001
element: 0000 0000 0000 004A
element: 0000 0000 0000 0048
element: 0000 0000 0000 0046
element: 0000 0000 0000 0044
element: 0000 0000 0000 0042
element: 0000 0000 0000 0040
element: 0000 0000 0000 003E
element: 0000 0000 0000 003C
element: 0000 0000 0000 003A
element: 0000 0000 0000 0038
element: 0000 0000 0000 0036
element: 0000 0000 0000 0034
element: 0000 0000 0000 0032
element: 0000 0000 0000 0030
element: 0000 0000 0000 002E
element: 0000 0000 0000 002C
element: 0000 0000 0000 002A
element: 0000 0000 0000 0028
element: 0000 0000 0000 0026
element: 0000 0000 0000 0024
element: 0000 0000 0000 0022
element: 0000 0000 0000 0020
element: 0000 0000 0000 001E
element: 0000 0000 0000 001C
element: 0000 0000 0000 001A
element: 0000 0000 0000 0018
element: 0000 0000 0000 0016
element: 0000 0000 0000 0014
element: 0000 0000 0000 0012
element: 0000 0000 0000 0010
element: 0000 0000 0000 000E
element: 0000 0000 0000 000C
element: 0000 0000 0000 000A
element: 0000 0000 0000 0008
element: 0000 0000 0000 0006
element: 0000 0000 0000 0004
element: 0000 0000 0000 0002
element: 0000 0000 0000 0000
array
Size: 0000 0000 0000 0000 zmm31: 0000 001C 0000 001A 0000 0018 0000 0016 0000 0014 0000 0012 0000 0010 0000 000E 0000 000C 0000 000A 0000 0008 0000 0006 0000 0004 0000 0002 0000 0000 0000 0000
ENDNasm::X86::Array::size($Array, $bs, $first)
Return the size of an array as a variable.
Parameter Description
1 $Array Array descriptor
2 $bs Optional arena address
3 $first Optional first blockExample:
my $N = 15;
my $A = CreateArena;
my $a = $A->CreateArray;
$a->push(V(element, $_)) for 1..$N;
K(loop, $N)->for(sub
{my ($start, $end, $next) = @_;
my $l = $a->size;
If $l == 0, Then {Jmp $end};
$a->pop(my $e = V(element));
$e->outNL;
});
ok Assemble(debug => 0, eq => <<END);
element: 0000 0000 0000 000F
element: 0000 0000 0000 000E
element: 0000 0000 0000 000D
element: 0000 0000 0000 000C
element: 0000 0000 0000 000B
element: 0000 0000 0000 000A
element: 0000 0000 0000 0009
element: 0000 0000 0000 0008
element: 0000 0000 0000 0007
element: 0000 0000 0000 0006
element: 0000 0000 0000 0005
element: 0000 0000 0000 0004
element: 0000 0000 0000 0003
element: 0000 0000 0000 0002
element: 0000 0000 0000 0001
ENDNasm::X86::Array::get($Array, @variables)
Get an element from the array.
Parameter Description
1 $Array Array descriptor
2 @variables VariablesExample:
my $c = Rb(0..255);
my $A = CreateArena; my $a = $A->CreateArray;
my $l = V(limit, 15);
my $L = $l + 5;
my sub put # Put a constant or a variable
{my ($e) = @_;
$a->push(element => (ref($e) ? $e : V($e, $e)));
};
my sub get # Get a constant or a variable
{my ($i) = @_;
$a->get(index=>(my $v = ref($i) ? $i : K('index', $i)), my $e = V(element));
$v->out("index: ", " "); $e->outNL;
};
$l->for(sub # Loop to the limit pushing
{my ($index, $start, $next, $end) = @_;
put($index+1);
});
$l->for(sub # Loop to the limit getting
{my ($index, $start, $next, $end) = @_;
get($index);
});
put(16);
get(15);
$L->for(sub
{my ($index, $start, $next, $end) = @_;
put($index+$l+2);
});
$L->for(sub
{my ($index, $start, $next, $end) = @_;
get($index + $l + 1);
});
if (1)
{$a->put(my $i = V('index', 9), my $e = V(element, 0xFFF9));
get(9);
}
if (1)
{$a->put(my $i = V('index', 19), my $e = V(element, 0xEEE9));
get(19);
}
($l+$L+1)->for(sub
{my ($i, $start, $next, $end) = @_;
$a->pop(my $e = V(element));
$e->outNL;
});
V(limit, 38)->for(sub # Push using a loop and reusing the freed space
{my ($index, $start, $next, $end) = @_;
$a->push(element=>$index*2);
});
V(limit, 38)->for(sub # Push using a loop and reusing the freed space
{my ($index, $start, $next, $end) = @_;
$a->pop(my $e = V(element));
$e->outNL;
});
$a->dump;
ok Assemble(debug => 0, eq => <<END);
index: 0000 0000 0000 0000 element: 0000 0000 0000 0001
index: 0000 0000 0000 0001 element: 0000 0000 0000 0002
index: 0000 0000 0000 0002 element: 0000 0000 0000 0003
index: 0000 0000 0000 0003 element: 0000 0000 0000 0004
index: 0000 0000 0000 0004 element: 0000 0000 0000 0005
index: 0000 0000 0000 0005 element: 0000 0000 0000 0006
index: 0000 0000 0000 0006 element: 0000 0000 0000 0007
index: 0000 0000 0000 0007 element: 0000 0000 0000 0008
index: 0000 0000 0000 0008 element: 0000 0000 0000 0009
index: 0000 0000 0000 0009 element: 0000 0000 0000 000A
index: 0000 0000 0000 000A element: 0000 0000 0000 000B
index: 0000 0000 0000 000B element: 0000 0000 0000 000C
index: 0000 0000 0000 000C element: 0000 0000 0000 000D
index: 0000 0000 0000 000D element: 0000 0000 0000 000E
index: 0000 0000 0000 000E element: 0000 0000 0000 000F
index: 0000 0000 0000 000F element: 0000 0000 0000 0010
index: 0000 0000 0000 0010 element: 0000 0000 0000 0011
index: 0000 0000 0000 0011 element: 0000 0000 0000 0012
index: 0000 0000 0000 0012 element: 0000 0000 0000 0013
index: 0000 0000 0000 0013 element: 0000 0000 0000 0014
index: 0000 0000 0000 0014 element: 0000 0000 0000 0015
index: 0000 0000 0000 0015 element: 0000 0000 0000 0016
index: 0000 0000 0000 0016 element: 0000 0000 0000 0017
index: 0000 0000 0000 0017 element: 0000 0000 0000 0018
index: 0000 0000 0000 0018 element: 0000 0000 0000 0019
index: 0000 0000 0000 0019 element: 0000 0000 0000 001A
index: 0000 0000 0000 001A element: 0000 0000 0000 001B
index: 0000 0000 0000 001B element: 0000 0000 0000 001C
index: 0000 0000 0000 001C element: 0000 0000 0000 001D
index: 0000 0000 0000 001D element: 0000 0000 0000 001E
index: 0000 0000 0000 001E element: 0000 0000 0000 001F
index: 0000 0000 0000 001F element: 0000 0000 0000 0020
index: 0000 0000 0000 0020 element: 0000 0000 0000 0021
index: 0000 0000 0000 0021 element: 0000 0000 0000 0022
index: 0000 0000 0000 0022 element: 0000 0000 0000 0023
index: 0000 0000 0000 0023 element: 0000 0000 0000 0024
index: 0000 0000 0000 0009 element: 0000 0000 0000 FFF9
index: 0000 0000 0000 0013 element: 0000 0000 0000 EEE9
element: 0000 0000 0000 0024
element: 0000 0000 0000 0023
element: 0000 0000 0000 0022
element: 0000 0000 0000 0021
element: 0000 0000 0000 0020
element: 0000 0000 0000 001F
element: 0000 0000 0000 001E
element: 0000 0000 0000 001D
element: 0000 0000 0000 001C
element: 0000 0000 0000 001B
element: 0000 0000 0000 001A
element: 0000 0000 0000 0019
element: 0000 0000 0000 0018
element: 0000 0000 0000 0017
element: 0000 0000 0000 0016
element: 0000 0000 0000 0015
element: 0000 0000 0000 EEE9
element: 0000 0000 0000 0013
element: 0000 0000 0000 0012
element: 0000 0000 0000 0011
element: 0000 0000 0000 0010
element: 0000 0000 0000 000F
element: 0000 0000 0000 000E
element: 0000 0000 0000 000D
element: 0000 0000 0000 000C
element: 0000 0000 0000 000B
element: 0000 0000 0000 FFF9
element: 0000 0000 0000 0009
element: 0000 0000 0000 0008
element: 0000 0000 0000 0007
element: 0000 0000 0000 0006
element: 0000 0000 0000 0005
element: 0000 0000 0000 0004
element: 0000 0000 0000 0003
element: 0000 0000 0000 0002
element: 0000 0000 0000 0001
element: 0000 0000 0000 004A
element: 0000 0000 0000 0048
element: 0000 0000 0000 0046
element: 0000 0000 0000 0044
element: 0000 0000 0000 0042
element: 0000 0000 0000 0040
element: 0000 0000 0000 003E
element: 0000 0000 0000 003C
element: 0000 0000 0000 003A
element: 0000 0000 0000 0038
element: 0000 0000 0000 0036
element: 0000 0000 0000 0034
element: 0000 0000 0000 0032
element: 0000 0000 0000 0030
element: 0000 0000 0000 002E
element: 0000 0000 0000 002C
element: 0000 0000 0000 002A
element: 0000 0000 0000 0028
element: 0000 0000 0000 0026
element: 0000 0000 0000 0024
element: 0000 0000 0000 0022
element: 0000 0000 0000 0020
element: 0000 0000 0000 001E
element: 0000 0000 0000 001C
element: 0000 0000 0000 001A
element: 0000 0000 0000 0018
element: 0000 0000 0000 0016
element: 0000 0000 0000 0014
element: 0000 0000 0000 0012
element: 0000 0000 0000 0010
element: 0000 0000 0000 000E
element: 0000 0000 0000 000C
element: 0000 0000 0000 000A
element: 0000 0000 0000 0008
element: 0000 0000 0000 0006
element: 0000 0000 0000 0004
element: 0000 0000 0000 0002
element: 0000 0000 0000 0000
array
Size: 0000 0000 0000 0000 zmm31: 0000 001C 0000 001A 0000 0018 0000 0016 0000 0014 0000 0012 0000 0010 0000 000E 0000 000C 0000 000A 0000 0008 0000 0006 0000 0004 0000 0002 0000 0000 0000 0000
ENDNasm::X86::Array::put($Array, @variables)
Put an element into an array as long as it is with in its limits established by pushing.
Parameter Description
1 $Array Array descriptor
2 @variables VariablesExample:
my $c = Rb(0..255);
my $A = CreateArena; my $a = $A->CreateArray;
my $l = V(limit, 15);
my $L = $l + 5;
my sub put # Put a constant or a variable
{my ($e) = @_;
$a->push(element => (ref($e) ? $e : V($e, $e)));
};
my sub get # Get a constant or a variable
{my ($i) = @_;
$a->get(index=>(my $v = ref($i) ? $i : K('index', $i)), my $e = V(element));
$v->out("index: ", " "); $e->outNL;
};
$l->for(sub # Loop to the limit pushing
{my ($index, $start, $next, $end) = @_;
put($index+1);
});
$l->for(sub # Loop to the limit getting
{my ($index, $start, $next, $end) = @_;
get($index);
});
put(16);
get(15);
$L->for(sub
{my ($index, $start, $next, $end) = @_;
put($index+$l+2);
});
$L->for(sub
{my ($index, $start, $next, $end) = @_;
get($index + $l + 1);
});
if (1)
{$a->put(my $i = V('index', 9), my $e = V(element, 0xFFF9));
get(9);
}
if (1)
{$a->put(my $i = V('index', 19), my $e = V(element, 0xEEE9));
get(19);
}
($l+$L+1)->for(sub
{my ($i, $start, $next, $end) = @_;
$a->pop(my $e = V(element));
$e->outNL;
});
V(limit, 38)->for(sub # Push using a loop and reusing the freed space
{my ($index, $start, $next, $end) = @_;
$a->push(element=>$index*2);
});
V(limit, 38)->for(sub # Push using a loop and reusing the freed space
{my ($index, $start, $next, $end) = @_;
$a->pop(my $e = V(element));
$e->outNL;
});
$a->dump;
ok Assemble(debug => 0, eq => <<END);
index: 0000 0000 0000 0000 element: 0000 0000 0000 0001
index: 0000 0000 0000 0001 element: 0000 0000 0000 0002
index: 0000 0000 0000 0002 element: 0000 0000 0000 0003
index: 0000 0000 0000 0003 element: 0000 0000 0000 0004
index: 0000 0000 0000 0004 element: 0000 0000 0000 0005
index: 0000 0000 0000 0005 element: 0000 0000 0000 0006
index: 0000 0000 0000 0006 element: 0000 0000 0000 0007
index: 0000 0000 0000 0007 element: 0000 0000 0000 0008
index: 0000 0000 0000 0008 element: 0000 0000 0000 0009
index: 0000 0000 0000 0009 element: 0000 0000 0000 000A
index: 0000 0000 0000 000A element: 0000 0000 0000 000B
index: 0000 0000 0000 000B element: 0000 0000 0000 000C
index: 0000 0000 0000 000C element: 0000 0000 0000 000D
index: 0000 0000 0000 000D element: 0000 0000 0000 000E
index: 0000 0000 0000 000E element: 0000 0000 0000 000F
index: 0000 0000 0000 000F element: 0000 0000 0000 0010
index: 0000 0000 0000 0010 element: 0000 0000 0000 0011
index: 0000 0000 0000 0011 element: 0000 0000 0000 0012
index: 0000 0000 0000 0012 element: 0000 0000 0000 0013
index: 0000 0000 0000 0013 element: 0000 0000 0000 0014
index: 0000 0000 0000 0014 element: 0000 0000 0000 0015
index: 0000 0000 0000 0015 element: 0000 0000 0000 0016
index: 0000 0000 0000 0016 element: 0000 0000 0000 0017
index: 0000 0000 0000 0017 element: 0000 0000 0000 0018
index: 0000 0000 0000 0018 element: 0000 0000 0000 0019
index: 0000 0000 0000 0019 element: 0000 0000 0000 001A
index: 0000 0000 0000 001A element: 0000 0000 0000 001B
index: 0000 0000 0000 001B element: 0000 0000 0000 001C
index: 0000 0000 0000 001C element: 0000 0000 0000 001D
index: 0000 0000 0000 001D element: 0000 0000 0000 001E
index: 0000 0000 0000 001E element: 0000 0000 0000 001F
index: 0000 0000 0000 001F element: 0000 0000 0000 0020
index: 0000 0000 0000 0020 element: 0000 0000 0000 0021
index: 0000 0000 0000 0021 element: 0000 0000 0000 0022
index: 0000 0000 0000 0022 element: 0000 0000 0000 0023
index: 0000 0000 0000 0023 element: 0000 0000 0000 0024
index: 0000 0000 0000 0009 element: 0000 0000 0000 FFF9
index: 0000 0000 0000 0013 element: 0000 0000 0000 EEE9
element: 0000 0000 0000 0024
element: 0000 0000 0000 0023
element: 0000 0000 0000 0022
element: 0000 0000 0000 0021
element: 0000 0000 0000 0020
element: 0000 0000 0000 001F
element: 0000 0000 0000 001E
element: 0000 0000 0000 001D
element: 0000 0000 0000 001C
element: 0000 0000 0000 001B
element: 0000 0000 0000 001A
element: 0000 0000 0000 0019
element: 0000 0000 0000 0018
element: 0000 0000 0000 0017
element: 0000 0000 0000 0016
element: 0000 0000 0000 0015
element: 0000 0000 0000 EEE9
element: 0000 0000 0000 0013
element: 0000 0000 0000 0012
element: 0000 0000 0000 0011
element: 0000 0000 0000 0010
element: 0000 0000 0000 000F
element: 0000 0000 0000 000E
element: 0000 0000 0000 000D
element: 0000 0000 0000 000C
element: 0000 0000 0000 000B
element: 0000 0000 0000 FFF9
element: 0000 0000 0000 0009
element: 0000 0000 0000 0008
element: 0000 0000 0000 0007
element: 0000 0000 0000 0006
element: 0000 0000 0000 0005
element: 0000 0000 0000 0004
element: 0000 0000 0000 0003
element: 0000 0000 0000 0002
element: 0000 0000 0000 0001
element: 0000 0000 0000 004A
element: 0000 0000 0000 0048
element: 0000 0000 0000 0046
element: 0000 0000 0000 0044
element: 0000 0000 0000 0042
element: 0000 0000 0000 0040
element: 0000 0000 0000 003E
element: 0000 0000 0000 003C
element: 0000 0000 0000 003A
element: 0000 0000 0000 0038
element: 0000 0000 0000 0036
element: 0000 0000 0000 0034
element: 0000 0000 0000 0032
element: 0000 0000 0000 0030
element: 0000 0000 0000 002E
element: 0000 0000 0000 002C
element: 0000 0000 0000 002A
element: 0000 0000 0000 0028
element: 0000 0000 0000 0026
element: 0000 0000 0000 0024
element: 0000 0000 0000 0022
element: 0000 0000 0000 0020
element: 0000 0000 0000 001E
element: 0000 0000 0000 001C
element: 0000 0000 0000 001A
element: 0000 0000 0000 0018
element: 0000 0000 0000 0016
element: 0000 0000 0000 0014
element: 0000 0000 0000 0012
element: 0000 0000 0000 0010
element: 0000 0000 0000 000E
element: 0000 0000 0000 000C
element: 0000 0000 0000 000A
element: 0000 0000 0000 0008
element: 0000 0000 0000 0006
element: 0000 0000 0000 0004
element: 0000 0000 0000 0002
element: 0000 0000 0000 0000
array
Size: 0000 0000 0000 0000 zmm31: 0000 001C 0000 001A 0000 0018 0000 0016 0000 0014 0000 0012 0000 0010 0000 000E 0000 000C 0000 000A 0000 0008 0000 0006 0000 0004 0000 0002 0000 0000 0000 0000
ENDTree
Tree constructed as sets of blocks in an arena.
Nasm::X86::Arena::DescribeTree($arena)
Return a descriptor for a tree in the specified arena.
Parameter Description
1 $arena Arena descriptorNasm::X86::Arena::CreateTree($arena, $bs)
Create a tree in an arena.
Parameter Description
1 $arena Arena description
2 $bs Optional arena addressExample:
my $N = 12;
my $b = CreateArena;
my $t = $b->CreateTree;
K(count, $N)->for(sub # Add some entries to the tree
{my ($index, $start, $next, $end) = @_;
my $k = $index + 1;
$t->insert($k, $k + 0x100);
$t->insert($k + $N, $k + 0x200);
});
$t->by(sub # Iterate through the tree
{my ($iter, $end) = @_;
$iter->key ->out('key: ');
$iter->data->out(' data: ');
my $D = V(depth);
$iter->tree->depth($t->address, $iter->node, $D);
$t->find($iter->key);
$t->found->out(' found: '); $t->data->out(' data: '); $D->outNL(' depth: ');
});
$t->find(K(key, 0xffff)); $t->found->outNL('Found: '); # Find some entries
$t->find(K(key, 0xd)); $t->found->outNL('Found: ');
If ($t->found > 0,
Then
{$t->data->outNL("Data : ");
});
ok Assemble(debug => 0, eq => <<END);
key: 0000 0000 0000 0001 data: 0000 0000 0000 0101 found: 0000 0000 0000 0001 data: 0000 0000 0000 0101 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0002 data: 0000 0000 0000 0102 found: 0000 0000 0000 0001 data: 0000 0000 0000 0102 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0003 data: 0000 0000 0000 0103 found: 0000 0000 0000 0001 data: 0000 0000 0000 0103 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0004 data: 0000 0000 0000 0104 found: 0000 0000 0000 0001 data: 0000 0000 0000 0104 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0005 data: 0000 0000 0000 0105 found: 0000 0000 0000 0001 data: 0000 0000 0000 0105 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0006 data: 0000 0000 0000 0106 found: 0000 0000 0000 0001 data: 0000 0000 0000 0106 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0007 data: 0000 0000 0000 0107 found: 0000 0000 0000 0001 data: 0000 0000 0000 0107 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0008 data: 0000 0000 0000 0108 found: 0000 0000 0000 0001 data: 0000 0000 0000 0108 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0009 data: 0000 0000 0000 0109 found: 0000 0000 0000 0001 data: 0000 0000 0000 0109 depth: 0000 0000 0000 0002
key: 0000 0000 0000 000A data: 0000 0000 0000 010A found: 0000 0000 0000 0001 data: 0000 0000 0000 010A depth: 0000 0000 0000 0002
key: 0000 0000 0000 000B data: 0000 0000 0000 010B found: 0000 0000 0000 0001 data: 0000 0000 0000 010B depth: 0000 0000 0000 0002
key: 0000 0000 0000 000C data: 0000 0000 0000 010C found: 0000 0000 0000 0001 data: 0000 0000 0000 010C depth: 0000 0000 0000 0002
key: 0000 0000 0000 000D data: 0000 0000 0000 0201 found: 0000 0000 0000 0001 data: 0000 0000 0000 0201 depth: 0000 0000 0000 0001
key: 0000 0000 0000 000E data: 0000 0000 0000 0202 found: 0000 0000 0000 0001 data: 0000 0000 0000 0202 depth: 0000 0000 0000 0002
key: 0000 0000 0000 000F data: 0000 0000 0000 0203 found: 0000 0000 0000 0001 data: 0000 0000 0000 0203 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0010 data: 0000 0000 0000 0204 found: 0000 0000 0000 0001 data: 0000 0000 0000 0204 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0011 data: 0000 0000 0000 0205 found: 0000 0000 0000 0001 data: 0000 0000 0000 0205 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0012 data: 0000 0000 0000 0206 found: 0000 0000 0000 0001 data: 0000 0000 0000 0206 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0013 data: 0000 0000 0000 0207 found: 0000 0000 0000 0001 data: 0000 0000 0000 0207 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0014 data: 0000 0000 0000 0208 found: 0000 0000 0000 0001 data: 0000 0000 0000 0208 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0015 data: 0000 0000 0000 0209 found: 0000 0000 0000 0001 data: 0000 0000 0000 0209 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0016 data: 0000 0000 0000 020A found: 0000 0000 0000 0001 data: 0000 0000 0000 020A depth: 0000 0000 0000 0002
key: 0000 0000 0000 0017 data: 0000 0000 0000 020B found: 0000 0000 0000 0001 data: 0000 0000 0000 020B depth: 0000 0000 0000 0002
key: 0000 0000 0000 0018 data: 0000 0000 0000 020C found: 0000 0000 0000 0001 data: 0000 0000 0000 020C depth: 0000 0000 0000 0002
Found: 0000 0000 0000 0000
Found: 0000 0000 0000 0001
Data : 0000 0000 0000 0201
ENDNasm::X86::Tree::Reload($tree, $first)
Reload the specified tree descriptions.
Parameter Description
1 $tree Tree descriptor
2 $first Optional first node of treeExample:
my $L = K(loop, 4);
my $b = CreateArena;
my $T = $b->CreateTree;
my $t = $T->Reload;
$L->for(sub
{my ($i, $start, $next, $end) = @_;
$t->insertTreeAndReload($i);
$t->first->outNL;
});
$t->insert($L, $L*2);
my $f = $T->Reload;
$L->for(sub
{my ($i, $start, $next, $end) = @_;
$f->findAndReload($i);
$i->out('i: '); $f->found->out(' f: '); $f->data->out(' d: '); $f->subTree->outNL(' s: ');
});
$f->find($L);
$L->out('N: '); $f->found->out(' f: '); $f->data->out(' d: '); $f->subTree->outNL(' s: ');
ok Assemble(debug => 0, eq => <<END);
first: 0000 0000 0000 0098
first: 0000 0000 0000 0118
first: 0000 0000 0000 0198
first: 0000 0000 0000 0218
i: 0000 0000 0000 0000 f: 0000 0000 0000 0001 d: 0000 0000 0000 0098 s: 0000 0000 0000 0001
i: 0000 0000 0000 0001 f: 0000 0000 0000 0001 d: 0000 0000 0000 0118 s: 0000 0000 0000 0001
i: 0000 0000 0000 0002 f: 0000 0000 0000 0001 d: 0000 0000 0000 0198 s: 0000 0000 0000 0001
i: 0000 0000 0000 0003 f: 0000 0000 0000 0001 d: 0000 0000 0000 0218 s: 0000 0000 0000 0001
N: 0000 0000 0000 0004 f: 0000 0000 0000 0001 d: 0000 0000 0000 0008 s: 0000 0000 0000 0000
ENDNasm::X86::Tree::find($t, $key, $bs, $first)
Find a key in a tree and test whether the found data is a sub tree. The results are held in the variables "found", "data", "subTree" addressed by the tree descriptor.
Parameter Description
1 $t Tree descriptor
2 $key Key field to search for
3 $bs Optional arena address
4 $first Optional start nodeNasm::X86::Tree::findAndReload($t, $key)
Find a key in the specified tree and clone it is it is a sub tree.
Parameter Description
1 $t Tree descriptor
2 $key Key as a dwordExample:
my $L = K(loop, 4);
my $b = CreateArena;
my $T = $b->CreateTree;
my $t = $T->Reload;
$L->for(sub
{my ($i, $start, $next, $end) = @_;
$t->insertTreeAndReload($i);
$t->first->outNL;
});
$t->insert($L, $L*2);
my $f = $T->Reload;
$L->for(sub
{my ($i, $start, $next, $end) = @_;
$f->findAndReload($i);
$i->out('i: '); $f->found->out(' f: '); $f->data->out(' d: '); $f->subTree->outNL(' s: ');
});
$f->find($L);
$L->out('N: '); $f->found->out(' f: '); $f->data->out(' d: '); $f->subTree->outNL(' s: ');
ok Assemble(debug => 0, eq => <<END);
first: 0000 0000 0000 0098
first: 0000 0000 0000 0118
first: 0000 0000 0000 0198
first: 0000 0000 0000 0218
i: 0000 0000 0000 0000 f: 0000 0000 0000 0001 d: 0000 0000 0000 0098 s: 0000 0000 0000 0001
i: 0000 0000 0000 0001 f: 0000 0000 0000 0001 d: 0000 0000 0000 0118 s: 0000 0000 0000 0001
i: 0000 0000 0000 0002 f: 0000 0000 0000 0001 d: 0000 0000 0000 0198 s: 0000 0000 0000 0001
i: 0000 0000 0000 0003 f: 0000 0000 0000 0001 d: 0000 0000 0000 0218 s: 0000 0000 0000 0001
N: 0000 0000 0000 0004 f: 0000 0000 0000 0001 d: 0000 0000 0000 0008 s: 0000 0000 0000 0000
ENDNasm::X86::Tree::findShortString($tree, $string)
Find the data at the end of a key chain held in a short string. Return a tree descriptor referencing the data located or marked as failed to find.
Parameter Description
1 $tree Tree descriptor
2 $string Short stringNasm::X86::Tree::size($t)
Return a variable containing the number of keys in the specified tree.
Parameter Description
1 $t Tree descriptorExample:
my $b = CreateArena;
my $t = $b->CreateTree;
my $s = $t->size;
$s->outNL;
V(count, 24)->for(sub
{my ($index, $start, $next, $end) = @_;
my $k = $index + 1; my $d = $k + 0x100;
$t->insert($k, $d);
my $s = $t->size;
$s->outNL;
});
$t->getKeysDataNode($b->bs, $t->first, 31, 30, 29);
PrintOutStringNL "Root"; $t->first->outNL('First: ');
PrintOutRegisterInHex zmm31, zmm30, zmm29;
$t->getKeysDataNode($b->bs, V(offset, 0xd8), 28,27,26);
PrintOutStringNL "Left";
PrintOutRegisterInHex zmm28, zmm27, zmm26;
$t->getKeysDataNode($b->bs, V(offset, 0x258), 28,27,26);
PrintOutStringNL "Left";
PrintOutRegisterInHex zmm28, zmm27, zmm26;
$t->getKeysDataNode($b->bs, V(offset, 0x198), 28,27,26);
PrintOutStringNL "Left";
PrintOutRegisterInHex zmm28, zmm27, zmm26;
ok Assemble(debug => 0, eq => <<END);
size: 0000 0000 0000 0000
size: 0000 0000 0000 0001
size: 0000 0000 0000 0002
size: 0000 0000 0000 0003
size: 0000 0000 0000 0004
size: 0000 0000 0000 0005
size: 0000 0000 0000 0006
size: 0000 0000 0000 0007
size: 0000 0000 0000 0008
size: 0000 0000 0000 0009
size: 0000 0000 0000 000A
size: 0000 0000 0000 000B
size: 0000 0000 0000 000C
size: 0000 0000 0000 000D
size: 0000 0000 0000 000E
size: 0000 0000 0000 000F
size: 0000 0000 0000 0010
size: 0000 0000 0000 0011
size: 0000 0000 0000 0012
size: 0000 0000 0000 0013
size: 0000 0000 0000 0014
size: 0000 0000 0000 0015
size: 0000 0000 0000 0016
size: 0000 0000 0000 0017
size: 0000 0000 0000 0018
Root
First: 0000 0000 0000 0018
zmm31: 0000 0058 0000 0002 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0010 0000 0008
zmm30: 0000 0098 0000 0030 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0110 0000 0108
zmm29: 0000 0018 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0198 0000 0258 0000 00D8
Left
zmm28: 0000 0118 0000 0007 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0001
zmm27: 0000 0158 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0107 0000 0106 0000 0105 0000 0104 0000 0103 0000 0102 0000 0101
zmm26: 0000 00D8 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Left
zmm28: 0000 0298 0000 0007 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000F 0000 000E 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009
zmm27: 0000 02D8 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 010F 0000 010E 0000 010D 0000 010C 0000 010B 0000 010A 0000 0109
zmm26: 0000 0258 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Left
zmm28: 0000 01D8 0000 0008 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0018 0000 0017 0000 0016 0000 0015 0000 0014 0000 0013 0000 0012 0000 0011
zmm27: 0000 0218 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0118 0000 0117 0000 0116 0000 0115 0000 0114 0000 0113 0000 0112 0000 0111
zmm26: 0000 0198 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ENDNasm::X86::Tree::insertDataOrTree($t, $tnd, $key, $data)
Insert either a key, data pair into the tree or create a sub tree at the specified key (if it does not already exist) and return the offset of the first block of the sub tree in the data variable.
Parameter Description
1 $t Tree descriptor
2 $tnd 0 - data or 1 - tree
3 $key Key as a dword
4 $data Data as a dwordNasm::X86::Tree::insert($t, $key, $data)
Insert a dword into into the specified tree at the specified key.
Parameter Description
1 $t Tree descriptor
2 $key Key as a dword
3 $data Data as a dwordNasm::X86::Tree::insertTree($t, $key, $subTree)
Insert a sub tree into the specified tree tree under the specified key. If no sub tree is supplied an empty one is provided gratis.
Parameter Description
1 $t Tree descriptor
2 $key Key as a dword
3 $subTree Sub tree to insert else an empty one will be addedExample:
my $b = CreateArena;
my $t = $b->CreateTree;
my $T = $b->CreateTree;
$T->insert (K(key, 2), K(data, 4));
$t->insertTree(K(key, 1), $T);
$t->print;
ok Assemble(debug => 0, eq => <<END);
Tree at: 0000 0000 0000 0018
key: 0000 0000 0000 0001 data: 0000 0000 0000 0098 depth: 0000 0000 0000 0001
Tree at: 0000 0000 0000 0098
key: 0000 0000 0000 0002 data: 0000 0000 0000 0004 depth: 0000 0000 0000 0001
END
my $L = K(loop, 11);
my $b = CreateArena;
my $B = CreateArena;
my $t = $b->CreateTree;
my $T = $B->CreateTree;
$L->for(sub
{my ($i, $start, $next, $end) = @_;
$t->insert($i+0x11, K(data, 0xFF));
$T->insert($i+0x22, K(data, 0xDD));
});
$b->dump;
$B->dump;
$t->print;
$T->print;
ok Assemble(debug => 0, eq => <<END);
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0098
0000: 0010 0000 0000 00009800 0000 0000 00000000 0000 0000 00001100 0000 1200 00001300 0000 1400 00001500 0000 1600 00001700 0000 1800 00001900 0000 1A00 0000
0040: 1B00 0000 0000 00000000 0000 0000 00000B00 0000 5800 0000FF00 0000 FF00 0000FF00 0000 FF00 0000FF00 0000 FF00 0000FF00 0000 FF00 0000FF00 0000 FF00 0000
0080: FF00 0000 0000 00000000 0000 0000 00001600 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0098
0000: 0010 0000 0000 00009800 0000 0000 00000000 0000 0000 00002200 0000 2300 00002400 0000 2500 00002600 0000 2700 00002800 0000 2900 00002A00 0000 2B00 0000
0040: 2C00 0000 0000 00000000 0000 0000 00000B00 0000 5800 0000DD00 0000 DD00 0000DD00 0000 DD00 0000DD00 0000 DD00 0000DD00 0000 DD00 0000DD00 0000 DD00 0000
0080: DD00 0000 0000 00000000 0000 0000 00001600 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Tree at: 0000 0000 0000 0018
key: 0000 0000 0000 0011 data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 0012 data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 0013 data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 0014 data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 0015 data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 0016 data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 0017 data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 0018 data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 0019 data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 001A data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
key: 0000 0000 0000 001B data: 0000 0000 0000 00FF depth: 0000 0000 0000 0001
Tree at: 0000 0000 0000 0018
key: 0000 0000 0000 0022 data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 0023 data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 0024 data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 0025 data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 0026 data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 0027 data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 0028 data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 0029 data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 002A data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 002B data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
key: 0000 0000 0000 002C data: 0000 0000 0000 00DD depth: 0000 0000 0000 0001
ENDNasm::X86::Tree::insertTreeAndReload($t, $key)
Insert a new sub tree into the specified tree tree under the specified key and return a descriptor for it. If the tree already exists, return a descriptor for it.
Parameter Description
1 $t Tree descriptor
2 $key Key as a dwordExample:
my $L = K(loop, 4);
my $b = CreateArena;
my $T = $b->CreateTree;
my $t = $T->Reload;
$L->for(sub
{my ($i, $start, $next, $end) = @_;
$t->insertTreeAndReload($i);
$t->first->outNL;
});
$t->insert($L, $L*2);
my $f = $T->Reload;
$L->for(sub
{my ($i, $start, $next, $end) = @_;
$f->findAndReload($i);
$i->out('i: '); $f->found->out(' f: '); $f->data->out(' d: '); $f->subTree->outNL(' s: ');
});
$f->find($L);
$L->out('N: '); $f->found->out(' f: '); $f->data->out(' d: '); $f->subTree->outNL(' s: ');
ok Assemble(debug => 0, eq => <<END);
first: 0000 0000 0000 0098
first: 0000 0000 0000 0118
first: 0000 0000 0000 0198
first: 0000 0000 0000 0218
i: 0000 0000 0000 0000 f: 0000 0000 0000 0001 d: 0000 0000 0000 0098 s: 0000 0000 0000 0001
i: 0000 0000 0000 0001 f: 0000 0000 0000 0001 d: 0000 0000 0000 0118 s: 0000 0000 0000 0001
i: 0000 0000 0000 0002 f: 0000 0000 0000 0001 d: 0000 0000 0000 0198 s: 0000 0000 0000 0001
i: 0000 0000 0000 0003 f: 0000 0000 0000 0001 d: 0000 0000 0000 0218 s: 0000 0000 0000 0001
N: 0000 0000 0000 0004 f: 0000 0000 0000 0001 d: 0000 0000 0000 0008 s: 0000 0000 0000 0000
ENDNasm::X86::Tree::insertShortString($tree, $string, $data)
Insert some data at the end of a chain of sub trees keyed by the contents of a short string.
Parameter Description
1 $tree Tree descriptor
2 $string Short string
3 $data Data as a dwordNasm::X86::Tree::leftOrRightMost($t, $dir, $bs, $node, $offset)
Return the offset of the left most or right most node.
Parameter Description
1 $t Tree descriptor
2 $dir Direction: left = 0 or right = 1
3 $bs Arena address
4 $node Start node
5 $offset Offset of located nodeNasm::X86::Tree::leftMost($t, $bs, $node, $offset)
Return the offset of the left most node from the specified node.
Parameter Description
1 $t Tree descriptor
2 $bs Arena address
3 $node Start node
4 $offset Returned offsetNasm::X86::Tree::rightMost($t, $bs, $node, $offset)
Return the offset of the left most node from the specified node.
Parameter Description
1 $t Tree descriptor
2 $bs Arena address
3 $node Start node
4 $offset Returned offsetNasm::X86::Tree::depth($t, $bs, $node, $depth)
Return the depth of a node within a tree.
Parameter Description
1 $t Tree descriptor
2 $bs Arena address
3 $node Node
4 $depth Return depthSub trees
Construct trees of trees.
Print a tree
Nasm::X86::Tree::print($t)
Print a tree.
Parameter Description
1 $t TreeExample:
my $L = V(loop, 45);
my $b = CreateArena;
my $t = $b->CreateTree;
$L->for(sub
{my ($i, $start, $next, $end) = @_;
my $l = $L - $i;
If ($i % 2 == 0, sub
{$t->insert($i, $l);
$t->insertTree($l);
});
});
$t->print;
ok Assemble(debug => 0, eq => <<END);
Tree at: 0000 0000 0000 0018
key: 0000 0000 0000 0000 data: 0000 0000 0000 002D depth: 0000 0000 0000 0002
key: 0000 0000 0000 0001 data: 0000 0000 0000 0ED8 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0ED8
key: 0000 0000 0000 0002 data: 0000 0000 0000 002B depth: 0000 0000 0000 0002
key: 0000 0000 0000 0003 data: 0000 0000 0000 0E58 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0E58
key: 0000 0000 0000 0004 data: 0000 0000 0000 0029 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0005 data: 0000 0000 0000 0DD8 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0DD8
key: 0000 0000 0000 0006 data: 0000 0000 0000 0027 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0007 data: 0000 0000 0000 0D58 depth: 0000 0000 0000 0001
Tree at: 0000 0000 0000 0D58
key: 0000 0000 0000 0008 data: 0000 0000 0000 0025 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0009 data: 0000 0000 0000 0CD8 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0CD8
key: 0000 0000 0000 000A data: 0000 0000 0000 0023 depth: 0000 0000 0000 0002
key: 0000 0000 0000 000B data: 0000 0000 0000 0C58 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0C58
key: 0000 0000 0000 000C data: 0000 0000 0000 0021 depth: 0000 0000 0000 0002
key: 0000 0000 0000 000D data: 0000 0000 0000 0BD8 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0BD8
key: 0000 0000 0000 000E data: 0000 0000 0000 001F depth: 0000 0000 0000 0001
key: 0000 0000 0000 000F data: 0000 0000 0000 0B58 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0B58
key: 0000 0000 0000 0010 data: 0000 0000 0000 001D depth: 0000 0000 0000 0002
key: 0000 0000 0000 0011 data: 0000 0000 0000 0AD8 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0AD8
key: 0000 0000 0000 0012 data: 0000 0000 0000 001B depth: 0000 0000 0000 0002
key: 0000 0000 0000 0013 data: 0000 0000 0000 0998 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0998
key: 0000 0000 0000 0014 data: 0000 0000 0000 0019 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0015 data: 0000 0000 0000 0918 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0918
key: 0000 0000 0000 0016 data: 0000 0000 0000 0017 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0017 data: 0000 0000 0000 0898 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0898
key: 0000 0000 0000 0018 data: 0000 0000 0000 0015 depth: 0000 0000 0000 0001
key: 0000 0000 0000 0019 data: 0000 0000 0000 0818 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0818
key: 0000 0000 0000 001A data: 0000 0000 0000 0013 depth: 0000 0000 0000 0002
key: 0000 0000 0000 001B data: 0000 0000 0000 06D8 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 06D8
key: 0000 0000 0000 001C data: 0000 0000 0000 0011 depth: 0000 0000 0000 0002
key: 0000 0000 0000 001D data: 0000 0000 0000 0658 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0658
key: 0000 0000 0000 001E data: 0000 0000 0000 000F depth: 0000 0000 0000 0002
key: 0000 0000 0000 001F data: 0000 0000 0000 05D8 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 05D8
key: 0000 0000 0000 0020 data: 0000 0000 0000 000D depth: 0000 0000 0000 0002
key: 0000 0000 0000 0021 data: 0000 0000 0000 0398 depth: 0000 0000 0000 0001
Tree at: 0000 0000 0000 0398
key: 0000 0000 0000 0022 data: 0000 0000 0000 000B depth: 0000 0000 0000 0002
key: 0000 0000 0000 0023 data: 0000 0000 0000 0318 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0318
key: 0000 0000 0000 0024 data: 0000 0000 0000 0009 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0025 data: 0000 0000 0000 0298 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0298
key: 0000 0000 0000 0026 data: 0000 0000 0000 0007 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0027 data: 0000 0000 0000 0218 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0218
key: 0000 0000 0000 0028 data: 0000 0000 0000 0005 depth: 0000 0000 0000 0002
key: 0000 0000 0000 0029 data: 0000 0000 0000 0198 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0198
key: 0000 0000 0000 002A data: 0000 0000 0000 0003 depth: 0000 0000 0000 0002
key: 0000 0000 0000 002B data: 0000 0000 0000 0118 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0118
key: 0000 0000 0000 002C data: 0000 0000 0000 0001 depth: 0000 0000 0000 0002
key: 0000 0000 0000 002D data: 0000 0000 0000 0098 depth: 0000 0000 0000 0002
Tree at: 0000 0000 0000 0098
ENDNasm::X86::Tree::dump($t, $first, $bs)
Dump a tree and all its sub trees.
Parameter Description
1 $t Tree
2 $first Optional offset to first node
3 $bs Optional arena addressExample:
my $L = V(loop, 15);
my $b = CreateArena;
my $t = $b->CreateTree;
$L->for(sub
{my ($i, $start, $next, $end) = @_;
If ($i % 2 == 0,
Then
{$t->insert ($i, $i);
},
Else
{$t->insertTree($i);
});
});
$t->dump();
ok Assemble(debug => 0, eq => <<END);
Tree at: 0000 0000 0000 0018 length: 0000 0000 0000 0001
0000 0018 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0518 0000 0458
0000 0418 0000 001E 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0218
0000 0058 0001 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0007
index: 0000 0000 0000 0000 key: 0000 0000 0000 0007 data: 0000 0000 0000 0218 subTree
Tree at: 0000 0000 0000 0218 length: 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0258 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
end
Tree at: 0000 0000 0000 0458 length: 0000 0000 0000 0007
0000 0458 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 04D8 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0006 0000 0198 0000 0004 0000 0118 0000 0002 0000 0098 0000 0000
0000 0498 002A 0007 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0001 0000 0000
index: 0000 0000 0000 0000 key: 0000 0000 0000 0000 data: 0000 0000 0000 0000
index: 0000 0000 0000 0001 key: 0000 0000 0000 0001 data: 0000 0000 0000 0098 subTree
index: 0000 0000 0000 0002 key: 0000 0000 0000 0002 data: 0000 0000 0000 0002
index: 0000 0000 0000 0003 key: 0000 0000 0000 0003 data: 0000 0000 0000 0118 subTree
index: 0000 0000 0000 0004 key: 0000 0000 0000 0004 data: 0000 0000 0000 0004
index: 0000 0000 0000 0005 key: 0000 0000 0000 0005 data: 0000 0000 0000 0198 subTree
index: 0000 0000 0000 0006 key: 0000 0000 0000 0006 data: 0000 0000 0000 0006
Tree at: 0000 0000 0000 0098 length: 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 00D8 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
end
Tree at: 0000 0000 0000 0118 length: 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0158 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
end
Tree at: 0000 0000 0000 0198 length: 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 01D8 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
end
end
Tree at: 0000 0000 0000 0518 length: 0000 0000 0000 0007
0000 0518 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0598 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000E 0000 0398 0000 000C 0000 0318 0000 000A 0000 0298 0000 0008
0000 0558 002A 0007 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000E 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009 0000 0008
index: 0000 0000 0000 0000 key: 0000 0000 0000 0008 data: 0000 0000 0000 0008
index: 0000 0000 0000 0001 key: 0000 0000 0000 0009 data: 0000 0000 0000 0298 subTree
index: 0000 0000 0000 0002 key: 0000 0000 0000 000A data: 0000 0000 0000 000A
index: 0000 0000 0000 0003 key: 0000 0000 0000 000B data: 0000 0000 0000 0318 subTree
index: 0000 0000 0000 0004 key: 0000 0000 0000 000C data: 0000 0000 0000 000C
index: 0000 0000 0000 0005 key: 0000 0000 0000 000D data: 0000 0000 0000 0398 subTree
index: 0000 0000 0000 0006 key: 0000 0000 0000 000E data: 0000 0000 0000 000E
Tree at: 0000 0000 0000 0298 length: 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 02D8 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
end
Tree at: 0000 0000 0000 0318 length: 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0358 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
end
Tree at: 0000 0000 0000 0398 length: 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 03D8 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
end
end
end
ENDIteration
Iterate through a tree non recursively
Nasm::X86::Tree::iterator($t, $bs, $first)
Iterate through a multi way tree starting either at the specified node or the first node of the specified tree.
Parameter Description
1 $t Tree
2 $bs Optional arena else the arena associated with the tree
3 $first Optionally the node to start at else the first node of the supplied tree will be usedNasm::X86::Tree::Iterator::next($iter)
Next element in the tree.
Parameter Description
1 $iter IteratorNasm::X86::Tree::by($t, $block, $bs, $first)
Call the specified block with each (key, data) from the specified tree in order.
Parameter Description
1 $t Tree descriptor
2 $block Block to execute
3 $bs Arena address if not the one associated with the tree descriptor
4 $first First node offset if not the root of the tree providedQuarks
Quarks allow us to replace unique strings with unique numbers. We can translate either from a string to its associated number or from a number to its associated string.
Nasm::X86::Arena::DescribeQuarks($arena)
Return a descriptor for a tree in the specified arena.
Parameter Description
1 $arena Arena descriptorNasm::X86::Arena::CreateQuarks($arena)
Create quarks in a specified arena.
Parameter Description
1 $arena Arena description optional arena addressExample:
my $N = 5;
my $a = CreateArena; # Arena containing quarks
my $Q = $a->CreateQuarks; # Quarks
my $s = CreateShortString(0); # Short string used to load and unload quarks
my $d = Rb(1..63);
for my $i(1..$N) # Load a set of quarks
{my $j = $i - 1;
$s->load(K(address, $d), K(size, 4+$i));
my $q = $Q->quarkFromShortString($s);
$q->outNL("New quark $j: "); # New quark, new number
}
PrintOutNL;
for my $i(reverse 1..$N) # Reload a set of quarks
{my $j = $i - 1;
$s->load(K(address, $d), K(size, 4+$i));
my $q = $Q->quarkFromShortString($s);
$q->outNL("Old quark $j: "); # Old quark, old number
}
PrintOutNL;
for my $i(1..$N) # Dump quarks
{my $j = $i - 1;
$s->clear;
$Q->shortStringFromQuark(K(quark, $j), $s);
PrintOutString "Quark string $j: ";
PrintOutRegisterInHex xmm0;
}
ok Assemble(debug => 0, trace => 0, eq => <<END);
New quark 0: 0000 0000 0000 0000
New quark 1: 0000 0000 0000 0001
New quark 2: 0000 0000 0000 0002
New quark 3: 0000 0000 0000 0003
New quark 4: 0000 0000 0000 0004
Old quark 4: 0000 0000 0000 0004
Old quark 3: 0000 0000 0000 0003
Old quark 2: 0000 0000 0000 0002
Old quark 1: 0000 0000 0000 0001
Old quark 0: 0000 0000 0000 0000
Quark string 0: xmm0: 0000 0000 0000 0000 0000 0504 0302 0105
Quark string 1: xmm0: 0000 0000 0000 0000 0006 0504 0302 0106
Quark string 2: xmm0: 0000 0000 0000 0000 0706 0504 0302 0107
Quark string 3: xmm0: 0000 0000 0000 0008 0706 0504 0302 0108
Quark string 4: xmm0: 0000 0000 0000 0908 0706 0504 0302 0109
END
my $s = CreateShortString(0); # Short string used to load and unload quarks
my $d = Rb(1..63);
$s->loadDwordBytes(0, K(address, $d), K(size, 9));
PrintOutRegisterInHex xmm0;
ok Assemble(debug => 0, trace => 0, eq => <<END);
xmm0: 0000 0000 0000 211D 1915 110D 0905 0109
ENDNasm::X86::Quarks::quarkFromShortString($q, $string)
Create a quark from a short string.
Parameter Description
1 $q Quarks
2 $string Short stringExample:
my $N = 5;
my $a = CreateArena; # Arena containing quarks
my $Q = $a->CreateQuarks; # Quarks
my $s = CreateShortString(0); # Short string used to load and unload quarks
my $d = Rb(1..63);
for my $i(1..$N) # Load a set of quarks
{my $j = $i - 1;
$s->load(K(address, $d), K(size, 4+$i));
my $q = $Q->quarkFromShortString($s);
$q->outNL("New quark $j: "); # New quark, new number
}
PrintOutNL;
for my $i(reverse 1..$N) # Reload a set of quarks
{my $j = $i - 1;
$s->load(K(address, $d), K(size, 4+$i));
my $q = $Q->quarkFromShortString($s);
$q->outNL("Old quark $j: "); # Old quark, old number
}
PrintOutNL;
for my $i(1..$N) # Dump quarks
{my $j = $i - 1;
$s->clear;
$Q->shortStringFromQuark(K(quark, $j), $s);
PrintOutString "Quark string $j: ";
PrintOutRegisterInHex xmm0;
}
ok Assemble(debug => 0, trace => 0, eq => <<END);
New quark 0: 0000 0000 0000 0000
New quark 1: 0000 0000 0000 0001
New quark 2: 0000 0000 0000 0002
New quark 3: 0000 0000 0000 0003
New quark 4: 0000 0000 0000 0004
Old quark 4: 0000 0000 0000 0004
Old quark 3: 0000 0000 0000 0003
Old quark 2: 0000 0000 0000 0002
Old quark 1: 0000 0000 0000 0001
Old quark 0: 0000 0000 0000 0000
Quark string 0: xmm0: 0000 0000 0000 0000 0000 0504 0302 0105
Quark string 1: xmm0: 0000 0000 0000 0000 0006 0504 0302 0106
Quark string 2: xmm0: 0000 0000 0000 0000 0706 0504 0302 0107
Quark string 3: xmm0: 0000 0000 0000 0008 0706 0504 0302 0108
Quark string 4: xmm0: 0000 0000 0000 0908 0706 0504 0302 0109
END
my $s = CreateShortString(0); # Short string used to load and unload quarks
my $d = Rb(1..63);
$s->loadDwordBytes(0, K(address, $d), K(size, 9));
PrintOutRegisterInHex xmm0;
ok Assemble(debug => 0, trace => 0, eq => <<END);
xmm0: 0000 0000 0000 211D 1915 110D 0905 0109
ENDNasm::X86::Quarks::shortStringFromQuark($q, $number, $string)
Load a short string from the quark with the specified number. Returns a variable that is set to one if the quark was found else zero.
Parameter Description
1 $q Quarks
2 $number Variable quark number
3 $string Short string to loadExample:
my $N = 5;
my $a = CreateArena; # Arena containing quarks
my $Q = $a->CreateQuarks; # Quarks
my $s = CreateShortString(0); # Short string used to load and unload quarks
my $d = Rb(1..63);
for my $i(1..$N) # Load a set of quarks
{my $j = $i - 1;
$s->load(K(address, $d), K(size, 4+$i));
my $q = $Q->quarkFromShortString($s);
$q->outNL("New quark $j: "); # New quark, new number
}
PrintOutNL;
for my $i(reverse 1..$N) # Reload a set of quarks
{my $j = $i - 1;
$s->load(K(address, $d), K(size, 4+$i));
my $q = $Q->quarkFromShortString($s);
$q->outNL("Old quark $j: "); # Old quark, old number
}
PrintOutNL;
for my $i(1..$N) # Dump quarks
{my $j = $i - 1;
$s->clear;
$Q->shortStringFromQuark(K(quark, $j), $s);
PrintOutString "Quark string $j: ";
PrintOutRegisterInHex xmm0;
}
ok Assemble(debug => 0, trace => 0, eq => <<END);
New quark 0: 0000 0000 0000 0000
New quark 1: 0000 0000 0000 0001
New quark 2: 0000 0000 0000 0002
New quark 3: 0000 0000 0000 0003
New quark 4: 0000 0000 0000 0004
Old quark 4: 0000 0000 0000 0004
Old quark 3: 0000 0000 0000 0003
Old quark 2: 0000 0000 0000 0002
Old quark 1: 0000 0000 0000 0001
Old quark 0: 0000 0000 0000 0000
Quark string 0: xmm0: 0000 0000 0000 0000 0000 0504 0302 0105
Quark string 1: xmm0: 0000 0000 0000 0000 0006 0504 0302 0106
Quark string 2: xmm0: 0000 0000 0000 0000 0706 0504 0302 0107
Quark string 3: xmm0: 0000 0000 0000 0008 0706 0504 0302 0108
Quark string 4: xmm0: 0000 0000 0000 0908 0706 0504 0302 0109
END
my $s = CreateShortString(0); # Short string used to load and unload quarks
my $d = Rb(1..63);
$s->loadDwordBytes(0, K(address, $d), K(size, 9));
PrintOutRegisterInHex xmm0;
ok Assemble(debug => 0, trace => 0, eq => <<END);
xmm0: 0000 0000 0000 211D 1915 110D 0905 0109
ENDAssemble
Assemble generated code
CallC($sub, @parameters)
Call a C subroutine.
Parameter Description
1 $sub Name of the sub to call
2 @parameters ParametersExample:
my $format = Rs "Hello %s
";
my $data = Rs "World";
Extern qw(printf exit malloc strcpy); Link 'c';
CallC 'malloc', length($format)+1; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov r15, rax;
CallC 'strcpy', r15, $format; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
CallC 'printf', r15, $data; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
CallC 'exit', 0; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble(eq => <<END);
Hello World
ENDExtern(@externalReferences)
Name external references.
Parameter Description
1 @externalReferences External referencesExample:
my $format = Rs "Hello %s
";
my $data = Rs "World";
Extern qw(printf exit malloc strcpy); Link 'c'; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
CallC 'malloc', length($format)+1;
Mov r15, rax;
CallC 'strcpy', r15, $format;
CallC 'printf', r15, $data;
CallC 'exit', 0;
ok Assemble(eq => <<END);
Hello World
ENDLink(@libraries)
Libraries to link with.
Parameter Description
1 @libraries External referencesExample:
my $format = Rs "Hello %s
";
my $data = Rs "World";
Extern qw(printf exit malloc strcpy); Link 'c'; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
CallC 'malloc', length($format)+1;
Mov r15, rax;
CallC 'strcpy', r15, $format;
CallC 'printf', r15, $data;
CallC 'exit', 0;
ok Assemble(eq => <<END);
Hello World
ENDStart()
Initialize the assembler.
Exit($c)
Exit with the specified return code or zero if no return code supplied. Assemble() automatically adds a call to Exit(0) if the last operation in the program is not a call to Exit.
Parameter Description
1 $c Return codeExample:
Comment "Print a string from memory";
my $s = "Hello World";
Mov rax, Rs($s);
Mov rdi, length $s;
PrintOutMemory;
Exit(0); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
ok Assemble =~ m(Hello World);Assemble(%options)
Assemble the generated code.
Parameter Description
1 %options OptionsExample:
PrintOutStringNL "Hello World";
PrintOutStringNL "Hello
World";
PrintErrStringNL "Hello World";
ok Assemble(debug => 0, eq => <<END); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Hello World
Hello
World
ENDHash Definitions
Nasm::X86 Definition
Tree.
Output fields
arena
The arena containing the quarks
args
Hash of {argument name, argument variable}
bs
Arena containing tree
constant
Constant if true
count
Counter - number of node
data
Data at this position
depth
Lexical depth
end
End label for this subroutine
expr
Expression that initializes the variable
first
Variable addressing offset to first block of keys.
found
Variable indicating whether the last find was successful or not
free
Free chain offset
global
Global if true
key
Key at this position
label
Address in memory
leftLength
Left split length
length
Maximum length in a block
lengthOffset
Offset of length in keys block. The length field is a word - see: "MultiWayTree.svg"
level
Lexical level
links
Location of links in bytes in zmm
loop
Offset of keys, data, node loop.
maxKeys
Maximum number of keys.
maximumLength
The maximum length of a short string
more
Iteration not yet finished
name
Name of the variable
nameString
Name of the sub as a string constant
next
Location of next offset in block in bytes
node
Current node within tree
numbersToStrings
Array mapping numbers to strings
options
Options
parameters
Parameters
pos
Current position within node
prev
Location of prev offset in block in bytes
reference
Reference to another variable
rightLength
Right split length
size
Size field offset
slots1
Number of slots in first block
slots2
Number of slots in second and subsequent blocks
splittingKey
POint at which to split a full block
start
Start label for this subroutine
stringsToNumbers
A tree mapping strings to numbers
subTree
Variable indicating whether the last find found a sub tree
tree
Tree we are iterating over
treeBits
Offset of tree bits in keys block. The tree bits field is a word, each bit of which tells us whether the corresponding data element is the offset (or not) to a sub tree of this tree .
treeBitsMask
Total of 14 tree bits
up
Offset of up in data block.
used
Used field offset
variables
Argument variables
vars
Number of variables in subroutine
width
Width of a key or data slot.
x
The associated xmm register
z
The full name of the zmm register
zmm
The number of the zmm register containing the string
Attributes
The following is a list of all the attributes in this package. A method coded with the same name in your package will over ride the method of the same name in this package and thus provide your value for the attribute in place of the default value supplied for this attribute by this package.
Replaceable Attribute List
Pi32 Pi64
Pi32
Pi as a 32 bit float.
Pi64
Pi as a 64 bit float.
Private Methods
Label({return "l".++$Labels unless @_;)
Create a unique label or reuse the one supplied.
Parameter Description
1 {return "l".++$Labels unless @_; Generate a labelDbwdq($s, @d)
Layout data.
Parameter Description
1 $s Element size
2 @d Data to be laid outRbwdq($s, @d)
Layout data.
Parameter Description
1 $s Element size
2 @d Data to be laid outNasm::X86::Sub::callTo($sub, $mode, $label, @parameters)
Call a sub passing it some parameters.
Parameter Description
1 $sub Subroutine descriptor
2 $mode Mode 0 - direct call or 1 - indirect call
3 $label Label of sub
4 @parameters Parameter variableshexTranslateTable()
Create/address a hex translate table and return its label.
PrintOutRipInHex()
Print the instruction pointer in hex.
PrintOutRflagsInHex()
Print the flags register in hex.
PrintUtf32($channel, $size, $address)
Print the specified number of utf32 characters at the specified address to the specified channel.
Parameter Description
1 $channel Channel
2 $size Variable: number of characters to print
3 $address Variable: address of memoryNasm::X86::Variable::dump($left, $channel, $newLine, $title1, $title2)
Dump the value of a variable to the specified channel adding an optional title and new line if requested.
Parameter Description
1 $left Left variable
2 $channel Channel
3 $newLine New line required
4 $title1 Optional leading title
5 $title2 Optional trailing titleExample:
my $a = V(a, 3); $a->outNL;
my $b = K(b, 2); $b->outNL;
my $c = $a + $b; $c->outNL;
my $d = $c - $a; $d->outNL;
my $g = $a * $b; $g->outNL;
my $h = $g / $b; $h->outNL;
my $i = $a % $b; $i->outNL;
If ($a == 3,
Then
{PrintOutStringNL "a == 3"
},
Else
{PrintOutStringNL "a != 3"
});
++$a; $a->outNL;
--$a; $a->outNL;
ok Assemble(debug => 0, eq => <<END);
a: 0000 0000 0000 0003
b: 0000 0000 0000 0002
(a add b): 0000 0000 0000 0005
((a add b) sub a): 0000 0000 0000 0002
(a times b): 0000 0000 0000 0006
((a times b) / b): 0000 0000 0000 0003
(a % b): 0000 0000 0000 0001
a == 3
a: 0000 0000 0000 0004
a: 0000 0000 0000 0003
ENDPushRR(@r)
Push registers onto the stack without tracking.
Parameter Description
1 @r RegisterPushR(@r)
Push registers onto the stack.
Parameter Description
1 @r RegisterExample:
Mov rax, 0x11111111;
Mov rbx, 0x22222222;
PushR my @save = (rax, rbx); # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rax, 0x33333333;
PopR;
PrintOutRegisterInHex rax;
PrintOutRegisterInHex rbx;
ok Assemble(debug => 0, eq => <<END);
rax: 0000 0000 1111 1111
rbx: 0000 0000 2222 2222
ENDPopRR(@r)
Pop registers from the stack without tracking.
Parameter Description
1 @r RegisterClassifyRange($recordOffsetInRange, @parameters)
Implementation of ClassifyInRange and ClassifyWithinRange.
Parameter Description
1 $recordOffsetInRange Record offset in classification in high byte if 1 else in classification if 2
2 @parameters ParametersCstrlen()
Length of the C style string addressed by rax returning the length in r15.
Example:
my $s = Rs("Hello WorldHello Skye"); Mov rax, $s;
Cstrlen; # 𝗘𝘅𝗮𝗺𝗽𝗹𝗲
Mov rdi, r15;
PrintOutMemoryNL;
ok Assemble(debug => 0, eq => <<END);
Hello World
Hello Skye
ENDNasm::X86::Arena::chain($arena, $bs, $variable, @offsets)
Return a variable with the end point of a chain of double words in the arena starting at the specified variable.
Parameter Description
1 $arena Arena descriptor
2 $bs Arena locator
3 $variable Start variable
4 @offsets Offsets chainExample:
my $format = Rd(map{4*$_+24} 0..64);
my $b = CreateArena;
my $a = $b->allocBlock($b->bs);
Vmovdqu8 zmm31, "[$format]";
$b->putBlock($b->bs, $a, 31);
my $r = $b->chain($b->bs, V(start, 0x18), 4); $r->outNL("chain1: ");
my $s = $b->chain($b->bs, $r, 4); $s->outNL("chain2: ");
my $t = $b->chain($b->bs, $s, 4); $t->outNL("chain3: ");
my $A = $b->chain($b->bs, V(start, 0x18), 4, 4, 4); $A->outNL("chain4: "); # Get a long chain
$b->putChain($b->bs, V(start, 0x18), V(end, 0xff), 4, 4, 4); # Put at the end of a long chain
$b->dump;
my $sub = Subroutine
{my ($p) = @_; # Parameters
If ($$p{c} == -1,
sub {PrintOutStringNL "C is minus one"},
sub {PrintOutStringNL "C is NOT minus one"},
);
If ($$p{d} == -1,
sub {PrintOutStringNL "D is minus one"},
sub {PrintOutStringNL "D is NOT minus one"},
);
$$p{c}->outNL;
$$p{e} += 1;
$$p{e}->outNL('E: ');
$$p{f}->outNL('F1: ');
$$p{f}++;
$$p{f}->outNL('F2: ');
} [qw(c d e f)], name=> 'aaa';
my $c = K(c, -1);
my $d = K(d, -1);
my $e = V(e, 1);
my $f = V(f, 2);
$sub->call($c, $d, $e, $f);
$f->outNL('F3: ');
ok Assemble(debug => 0, eq => <<END);
chain1: 0000 0000 0000 001C
chain2: 0000 0000 0000 0020
chain3: 0000 0000 0000 0024
chain4: 0000 0000 0000 0024
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0058
0000: 0010 0000 0000 00005800 0000 0000 00000000 0000 0000 00001800 0000 1C00 00002000 0000 FF00 00002800 0000 2C00 00003000 0000 3400 00003800 0000 3C00 0000
0040: 4000 0000 4400 00004800 0000 4C00 00005000 0000 5400 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
C is minus one
D is minus one
c: FFFF FFFF FFFF FFFF
E: 0000 0000 0000 0002
F1: 0000 0000 0000 0002
F2: 0000 0000 0000 0003
F3: 0000 0000 0000 0003
ENDNasm::X86::Arena::putChain($arena, $bs, $start, $value, @offsets)
Write the double word in the specified variable to the double word location at the the specified offset in the specified arena.
Parameter Description
1 $arena Arena descriptor
2 $bs Arena locator variable
3 $start Start variable
4 $value Value to put as a variable
5 @offsets Offsets chainNasm::X86::Arena::updateSpace($arena, @variables)
Make sure that the arena addressed by rax has enough space to accommodate content of length rdi.
Parameter Description
1 $arena Arena descriptor
2 @variables VariablesNasm::X86::Arena::blockSize($arena)
Size of a block.
Parameter Description
1 $arena ArenaNasm::X86::Arena::firstFreeBlock($arena)
Create and load a variable with the first free block on the free block chain or zero if no such block in the given arena.
Parameter Description
1 $arena Arena address as a variableNasm::X86::Arena::setFirstFreeBlock($arena, $offset)
Set the first free block field from a variable.
Parameter Description
1 $arena Arena descriptor
2 $offset First free block offset as a variableNasm::X86::Arena::freeBlock($arena, @variables)
Free a block in an arena by placing it on the free chain.
Parameter Description
1 $arena Arena descriptor
2 @variables VariablesExample:
my $a = CreateArena; $a->dump;
my $b1 = $a->allocBlock($a->bs); $a->dump;
my $b2 = $a->allocBlock($a->bs); $a->dump;
$a->freeBlock($b2); $a->dump;
$a->freeBlock($b1); $a->dump;
ok Assemble(debug => 0, eq => <<END);
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0018
0000: 0010 0000 0000 00001800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0058
0000: 0010 0000 0000 00005800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0098
0000: 0010 0000 0000 00009800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0098
0000: 0010 0000 0000 00009800 0000 0000 00005800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
Arena
Size: 0000 0000 0000 1000
Used: 0000 0000 0000 0098
0000: 0010 0000 0000 00009800 0000 0000 00001800 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0040: 0000 0000 0000 00000000 0000 0000 00000000 0000 5800 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
0080: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
00C0: 0000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 00000000 0000 0000 0000
ENDNasm::X86::Arena::getBlock($arena, $address, $block, $zmm, $work1, $work2)
Get the block with the specified offset in the specified string and return it in the numbered zmm.
Parameter Description
1 $arena Arena descriptor
2 $address Arena address variable
3 $block Offset of the block as a variable
4 $zmm Number of zmm register to contain block
5 $work1 First optional work register
6 $work2 Second optional work registerNasm::X86::Arena::putBlock($arena, $address, $block, $zmm, $work1, $work2)
Write the numbered zmm to the block at the specified offset in the specified arena.
Parameter Description
1 $arena Arena descriptor
2 $address Arena address variable
3 $block Offset of the block as a variable
4 $zmm Number of zmm register to contain block
5 $work1 First optional work register
6 $work2 Second optional work registerNasm::X86::String::address($String)
Address of a string.
Parameter Description
1 $String String descriptorNasm::X86::String::allocBlock($String, $arena)
Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
Parameter Description
1 $String String descriptor
2 $arena Arena addressNasm::X86::String::getBlockLength($String, $zmm)
Get the block length of the numbered zmm and return it in a variable.
Parameter Description
1 $String String descriptor
2 $zmm Number of zmm registerNasm::X86::String::setBlockLengthInZmm($String, $length, $zmm)
Set the block length of the numbered zmm to the specified length.
Parameter Description
1 $String String descriptor
2 $length Length as a variable
3 $zmm Number of zmm registerNasm::X86::String::getBlock($String, $bsa, $block, $zmm)
Get the block with the specified offset in the specified string and return it in the numbered zmm.
Parameter Description
1 $String String descriptor
2 $bsa Arena variable
3 $block Offset of the block as a variable
4 $zmm Number of zmm register to contain blockNasm::X86::String::putBlock($String, $bsa, $block, $zmm)
Write the numbered zmm to the block at the specified offset in the specified arena.
Parameter Description
1 $String String descriptor
2 $bsa Arena variable
3 $block Block in arena
4 $zmm Content variableNasm::X86::String::getNextAndPrevBlockOffsetFromZmm($String, $zmm)
Get the offsets of the next and previous blocks as variables from the specified zmm.
Parameter Description
1 $String String descriptor
2 $zmm Zmm containing blockNasm::X86::String::putNextandPrevBlockOffsetIntoZmm($String, $zmm, $next, $prev)
Save next and prev offsets into a zmm representing a block.
Parameter Description
1 $String String descriptor
2 $zmm Zmm containing block
3 $next Next offset as a variable
4 $prev Prev offset as a variableNasm::X86::Array::address($Array)
Address of a string.
Parameter Description
1 $Array Array descriptorNasm::X86::Array::allocBlock($Array, $bs)
Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
Parameter Description
1 $Array Array descriptor
2 $bs Arena addressNasm::X86::Tree::allocKeysDataNode($t, $bs, $K, $D, $N)
Allocate a keys/data/node block and place it in the numbered zmm registers.
Parameter Description
1 $t Tree descriptor
2 $bs Arena address
3 $K Numbered zmm for keys
4 $D Numbered zmm for data
5 $N Numbered zmm for childrenNasm::X86::Tree::splitNode($t, $bs, $node, $key, @variables)
Split a non root node given its offset in an arena retaining the key being inserted in the node being split while putting the remainder to the left or right.
Parameter Description
1 $t Tree descriptor
2 $bs Backing arena
3 $node Offset of node
4 $key Key
5 @variables VariablesNasm::X86::Tree::reParent($t, $bs, $PK, $PD, $PN, @variables)
Reparent the children of a node held in registers. The children are in the backing arena not registers.
Parameter Description
1 $t Tree descriptor
2 $bs Backing arena
3 $PK Numbered zmm key node
4 $PD Numbered zmm data node
5 $PN Numbered zmm child node
6 @variables VariablesNasm::X86::Tree::transferTreeBitsFromParent($t, $parent, $left, $right)
Transfer tree bits when splitting a full node.
Parameter Description
1 $t Tree descriptor
2 $parent Numbered parent zmm
3 $left Numbered left zmm
4 $right Numbered right zmmExample:
my $B = Rb(0..63);
Vmovdqu8 zmm0, "[$B]";
loadFromZmm r15, w, zmm, 14;
my $b = CreateArena;
my $t = $b->CreateTree;
$t->getTreeBits(0, r14);
PrintOutRegisterInHex zmm0, r15, r14;
Mov r14, my $treeBits = 0xDCBA;
$t->putTreeBits(1, r14);
PrintOutRegisterInHex zmm1;
$t->transferTreeBitsFromParent(1, 2, 3);
PrintOutStringNL "Split:";
PrintOutRegisterInHex zmm1, zmm2, zmm3;
my $left = $treeBits & ((1<<$t->leftLength) - 1);
my $right = ($treeBits >> ($t->leftLength + 1)) & ((1<<$t->rightLength) - 1);
my $l = sprintf("%02X", $left);
my $r = sprintf("%02X", $right);
ok Assemble(debug => 0, eq => <<END);
zmm0: 3F3E 3D3C 3B3A 3938 3736 3534 3332 3130 2F2E 2D2C 2B2A 2928 2726 2524 2322 2120 1F1E 1D1C 1B1A 1918 1716 1514 1312 1110 0F0E 0D0C 0B0A 0908 0706 0504 0302 0100
r15: 0000 0000 0000 0F0E
r14: 0000 0000 0000 3B3A
zmm1: 0000 0000 DCBA 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Split:
zmm1: 0000 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
zmm2: 0000 0000 00$l 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
zmm3: 0000 0000 00$r 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ENDNasm::X86::Tree::transferTreeBitsFromLeftOrRight($t, $rnl, $point, $parent, $left, $right)
Transfer tree bits when splitting a full left or right node.
Parameter Description
1 $t Tree descriptor
2 $rnl 0 - left 1 - right
3 $point Register indicating point of left in parent
4 $parent Numbered parent zmm
5 $left Numbered left zmm
6 $right Numbered right zmmNasm::X86::Tree::transferTreeBitsFromLeft($t, $point, $parent, $left, $right)
Transfer tree bits when splitting a full left node.
Parameter Description
1 $t Tree descriptor
2 $point Register indicating point of left in parent
3 $parent Numbered parent zmm
4 $left Numbered left zmm
5 $right Numbered right zmmExample:
my $b = CreateArena;
my $t = $b->CreateTree;
my $lR = "110110";
my $lP = "1";
my $lL = "1110111";
my $p1 = "01010_110010";
my $p2 = "1";
my $epe = sprintf("%04X", eval "0b$p1$lP$p2");
my $ele = sprintf("%04X", eval "0b$lL" );
my $ere = sprintf("%04X", eval "0b$lR" );
my @expected;
for my $i(0..1)
{Mov r15, eval "0b$lR$lP$lL"; $t->putTreeBits(1+$i, r15);
Mov r15, eval "0b$p1$p2"; $t->putTreeBits(0, r15);
PrintOutRegisterInHex zmm 0, 1+$i;
Mov r15, 0b10;
$t->transferTreeBitsFromLeft (r15, 0, 1, 2) unless $i;
$t->transferTreeBitsFromRight(r15, 0, 1, 2) if $i;
PrintOutRegisterInHex zmm 0..2;
my $zzz = $i ? "zmm2" : "zmm1";
push @expected, <<END;
zmm0: 0000 0000 0565 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
$zzz: 0000 0000 36F7 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
zmm0: 0000 0000 $epe 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
zmm1: 0000 0000 $ele 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
zmm2: 0000 0000 $ere 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
END
}
ok Assemble(debug => 0, eq => join "", @expected);Nasm::X86::Tree::transferTreeBitsFromRight($t, $point, $parent, $left, $right)
Transfer tree bits when splitting a full right node.
Parameter Description
1 $t Tree descriptor
2 $point Register indicating point of right in parent
3 $parent Numbered parent zmm
4 $left Numbered left zmm
5 $right Numbered right zmmExample:
my $b = CreateArena;
my $t = $b->CreateTree;
my $lR = "110110";
my $lP = "1";
my $lL = "1110111";
my $p1 = "01010_110010";
my $p2 = "1";
my $epe = sprintf("%04X", eval "0b$p1$lP$p2");
my $ele = sprintf("%04X", eval "0b$lL" );
my $ere = sprintf("%04X", eval "0b$lR" );
my @expected;
for my $i(0..1)
{Mov r15, eval "0b$lR$lP$lL"; $t->putTreeBits(1+$i, r15);
Mov r15, eval "0b$p1$p2"; $t->putTreeBits(0, r15);
PrintOutRegisterInHex zmm 0, 1+$i;
Mov r15, 0b10;
$t->transferTreeBitsFromLeft (r15, 0, 1, 2) unless $i;
$t->transferTreeBitsFromRight(r15, 0, 1, 2) if $i;
PrintOutRegisterInHex zmm 0..2;
my $zzz = $i ? "zmm2" : "zmm1";
push @expected, <<END;
zmm0: 0000 0000 0565 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
$zzz: 0000 0000 36F7 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
zmm0: 0000 0000 $epe 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
zmm1: 0000 0000 $ele 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
zmm2: 0000 0000 $ere 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
END
}
ok Assemble(debug => 0, eq => join "", @expected);Nasm::X86::Tree::splitFullRoot($t, $bs)
Split a full root block held in 31..29 and place the left block in 28..26 and the right block in 25..23. The left and right blocks should have their loop offsets set so they can be inserted into the root.
Parameter Description
1 $t Tree descriptor
2 $bs Arena addressNasm::X86::Tree::splitFullLeftOrRightNode($t, $right)
Split a full a full left node (held in 28..26) or a full right node (held in 25..23) whose parent is in 31..29.
Parameter Description
1 $t Tree descriptor
2 $right 0 left or 1 rightNasm::X86::Tree::splitFullLeftNode($t)
Split a full left node block held in 28..26 whose parent is in 31..29 and place the new right block in 25..23. The parent is assumed to be not full. The loop and length fields are assumed to be authoritative and hence are preserved.
Parameter Description
1 $t Tree descriptorExample:
my $Sk = Rd(17..28, 0, 0, 12, 0xFF);
my $Sd = Rd(17..28, 0, 0, 0xDD, 0xEE);
my $Sn = Rd(1..13, 0, 0, 0xCC);
my $sk = Rd(1..14, 14, 0xA1);
my $sd = Rd(1..14, 0xCC, 0xA2);
my $sn = Rd(1..15, 0xA3);
my $rk = Rd((0)x14, 14, 0xB1);
my $rd = Rd((0)x14, 0xCC, 0xB2);
my $rn = Rd((0)x15, 0xB3);
my $b = CreateArena;
my $t = $b->CreateTree;
Vmovdqu8 zmm31, "[$Sk]";
Vmovdqu8 zmm30, "[$Sd]";
Vmovdqu8 zmm29, "[$Sn]";
Vmovdqu8 zmm28, "[$sk]";
Vmovdqu8 zmm27, "[$sd]";
Vmovdqu8 zmm26, "[$sn]";
Vmovdqu8 zmm25, "[$rk]";
Vmovdqu8 zmm24, "[$rd]";
Vmovdqu8 zmm23, "[$rn]";
$t->splitFullLeftNode;
PrintOutRegisterInHex reverse zmm(23..31);
ok Assemble(debug => 0, eq => <<END);
zmm31: 0000 00FF 0000 000D 0000 0000 0000 0000 0000 001C 0000 001B 0000 001A 0000 0019 0000 0018 0000 0017 0000 0016 0000 0015 0000 0014 0000 0013 0000 0012 0000 0011
zmm30: 0000 00EE 0000 00DD 0000 0000 0000 0000 0000 001C 0000 001B 0000 001A 0000 0019 0000 0018 0000 0017 0000 0016 0000 0015 0000 0014 0000 0013 0000 0012 0000 0011
zmm29: 0000 00CC 0000 0000 0000 0000 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009 0000 0008 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0001
zmm28: 0000 00A1 0000 0007 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0001
zmm27: 0000 00A2 0000 00CC 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0001
zmm26: 0000 00A3 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0001
zmm25: 0000 00B1 0000 0006 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000E 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009
zmm24: 0000 00B2 0000 00CC 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000E 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009
zmm23: 0000 00B3 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000E 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009
END
my $tk = Rd(1, (0) x 13, 1, 0xC1);
my $td = Rd(1, (0) x 14, 0xC2);
my $tn = Rd(1, 0xAA, (0) x 13, 0xCC);
my $lk = Rd(1..14, 14, 0xA1);
my $ld = Rd(1..14, 0xCC, 0xA2);
my $ln = Rd(1..15, 0xAA);
my $rk = Rd((0)x14, 14, 0xB1);
my $rd = Rd((0)x14, 0xCC, 0xB2);
my $rn = Rd((0)x15, 0xBB);
my $b = CreateArena;
my $t = $b->CreateTree;
Vmovdqu8 zmm31, "[$tk]";
Vmovdqu8 zmm30, "[$td]";
Vmovdqu8 zmm29, "[$tn]";
Vmovdqu8 zmm28, "[$lk]";
Vmovdqu8 zmm27, "[$ld]";
Vmovdqu8 zmm26, "[$ln]";
Vmovdqu8 zmm25, "[$rk]";
Vmovdqu8 zmm24, "[$rd]";
Vmovdqu8 zmm23, "[$rn]";
$t->splitFullLeftNode;
PrintOutRegisterInHex reverse zmm(23..31);
ok Assemble(debug => 0, eq => <<END);
zmm31: 0000 00C1 0000 0002 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0008 0000 0001
zmm30: 0000 00C2 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0008 0000 0001
zmm29: 0000 00CC 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 00BB 0000 00AA 0000 0001
zmm28: 0000 00A1 0000 0007 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0001
zmm27: 0000 00A2 0000 00CC 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0001
zmm26: 0000 00AA 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0001
zmm25: 0000 00B1 0000 0006 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000E 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009
zmm24: 0000 00B2 0000 00CC 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000E 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009
zmm23: 0000 00BB 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000E 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009
ENDNasm::X86::Tree::splitFullRightNode($t)
Split a full right node block held in 25..23 whose parent is in 31..29 and place the new left block in 28..26. The loop and length fields are assumed to be authoritative and hence are preserved.
Parameter Description
1 $t Tree descriptorExample:
my $tk = Rd(1..12, 0, 0, 12, 0xC1);
my $td = Rd(1..12, 0, 0, 0, 0xC2);
my $tn = Rd(1, 0xBB, 3..13, 0, 0, 0xCC);
my $lk = Rd(17..30, 14, 0xA1);
my $ld = Rd(17..30, 0xCC, 0xA2);
my $ln = Rd(17..31, 0xAA);
my $rk = Rd(17..30, 14, 0xB1);
my $rd = Rd(17..30, 0xCC, 0xB2);
my $rn = Rd(17..31, 0xBB);
my $b = CreateArena;
my $t = $b->CreateTree;
Vmovdqu8 zmm31, "[$tk]";
Vmovdqu8 zmm30, "[$td]";
Vmovdqu8 zmm29, "[$tn]";
Vmovdqu8 zmm28, "[$lk]";
Vmovdqu8 zmm27, "[$ld]";
Vmovdqu8 zmm26, "[$ln]";
Vmovdqu8 zmm25, "[$rk]";
Vmovdqu8 zmm24, "[$rd]";
Vmovdqu8 zmm23, "[$rn]";
$t->splitFullRightNode;
PrintOutRegisterInHex reverse zmm(23..31);
ok Assemble(debug => 0, eq => <<END);
zmm31: 0000 00C1 0000 000D 0000 0000 0000 000C 0000 000B 0000 000A 0000 0009 0000 0008 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0018 0000 0001
zmm30: 0000 00C2 0000 0000 0000 0000 0000 000C 0000 000B 0000 000A 0000 0009 0000 0008 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 0002 0000 0018 0000 0001
zmm29: 0000 00CC 0000 0000 0000 000D 0000 000C 0000 000B 0000 000A 0000 0009 0000 0008 0000 0007 0000 0006 0000 0005 0000 0004 0000 0003 0000 00BB 0000 00AA 0000 0001
zmm28: 0000 00A1 0000 0007 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0017 0000 0016 0000 0015 0000 0014 0000 0013 0000 0012 0000 0011
zmm27: 0000 00A2 0000 00CC 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0017 0000 0016 0000 0015 0000 0014 0000 0013 0000 0012 0000 0011
zmm26: 0000 00AA 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0017 0000 0016 0000 0015 0000 0014 0000 0013 0000 0012 0000 0011
zmm25: 0000 00B1 0000 0006 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 001E 0000 001D 0000 001C 0000 001B 0000 001A 0000 0019
zmm24: 0000 00B2 0000 00CC 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 001E 0000 001D 0000 001C 0000 001B 0000 001A 0000 0019
zmm23: 0000 00BB 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 001E 0000 001D 0000 001C 0000 001B 0000 001A 0000 0019
ENDNasm::X86::Tree::findAndSplit($t, $bs, $first, $key, $compare, $offset, $index)
Find a key in a tree which is known to contain at least one key splitting full nodes along the path to the key.
Parameter Description
1 $t Tree descriptor
2 $bs Arena address
3 $first Start node
4 $key Key to find
5 $compare Last comparison result variable
6 $offset Offset of last node found
7 $index Index within last node foundNasm::X86::Tree::getKeysData($t, $bs, $offset, $zmmKeys, $zmmData, $work1, $work2)
Load the keys and data blocks for a node.
Parameter Description
1 $t Tree descriptor
2 $bs Arena address
3 $offset Offset as a variable
4 $zmmKeys Numbered zmm for keys
5 $zmmData Numbered data for keys
6 $work1 Optional first work register
7 $work2 Optional second work registerNasm::X86::Tree::putKeysData($t, $bs, $offset, $zmmKeys, $zmmData, $work1, $work2)
Save the key and data blocks for a node.
Parameter Description
1 $t Tree descriptor
2 $bs Arena address
3 $offset Offset as a variable
4 $zmmKeys Numbered zmm for keys
5 $zmmData Numbered data for keys
6 $work1 Optional first work register
7 $work2 Optional second work registerNasm::X86::Tree::getKeysDataNode($t, $bs, $offset, $zmmKeys, $zmmData, $zmmNode, $work1, $work2)
Load the keys, data and child nodes for a node.
Parameter Description
1 $t Tree descriptor
2 $bs Arena address
3 $offset Offset as a variable
4 $zmmKeys Numbered zmm for keys
5 $zmmData Numbered data for keys
6 $zmmNode Numbered numbered for keys
7 $work1 Optional first work register
8 $work2 Optional second work registerNasm::X86::Tree::putKeysDataNode($t, $bs, $offset, $zmmKeys, $zmmData, $zmmNode, $work1, $work2)
Save the keys, data and child nodes for a node.
Parameter Description
1 $t Tree descriptor
2 $bs Arena address
3 $offset Offset as a variable
4 $zmmKeys Numbered zmm for keys
5 $zmmData Numbered data for keys
6 $zmmNode Numbered numbered for keys
7 $work1 Optional first work register
8 $work2 Optional second work registerNasm::X86::Tree::getLengthInKeys($t, $zmm)
Get the length of the keys block in the numbered zmm and return it as a variable.
Parameter Description
1 $t Tree descriptor
2 $zmm Zmm numberNasm::X86::Tree::putLengthInKeys($t, $zmm, $length)
Get the length of the block in the numbered zmm from the specified variable.
Parameter Description
1 $t Tree
2 $zmm Zmm number
3 $length Length variableNasm::X86::Tree::getUpFromData11($t, $zmm, $transfer)
Get the up offset from the data block in the numbered zmm and return it as a variable.
Parameter Description
1 $t Tree descriptor
2 $zmm Zmm number
3 $transfer Transfer registerNasm::X86::Tree::putUpIntoData11($t, $offset, $zmm, $transfer)
Put the offset of the parent keys block expressed as a variable into the numbered zmm.
Parameter Description
1 $t Tree descriptor
2 $offset Variable containing up offset
3 $zmm Zmm number
4 $transfer Optional transfer registerNasm::X86::Tree::getUpFromData($t, $zmm, $transfer)
Get the decompressed up offset from the data block in the numbered zmm and return it as a variable. The lowest 6 bits of an offset are always 0b011000. The up field becomes the count field for the root node which has no node above it. To differentiate between up and count, the lowest bit of the up field is set for offsets, and cleared for the count of the number of nodes in the tree held in the root node. Thus if this dword is set to zero it means that this is the count field for an empty tree.
Parameter Description
1 $t Tree descriptor
2 $zmm Zmm number
3 $transfer Transfer registerNasm::X86::Tree::getUpFromDataNM($t, $zmm, $transfer)
Get the compressed up offset//count from the data block in the numbered zmm and return it as a variable.
Parameter Description
1 $t Tree descriptor
2 $zmm Zmm number
3 $transfer Transfer registerNasm::X86::Tree::putUpIntoData($t, $offset, $zmm, $transfer)
Put the offset of the parent keys block expressed as a variable into the numbered zmm. Offsets always end in 0b01100 as long as only 64 byte allocations have been made in the arena. Offsets are indicated by setting the lowest bit in the dword containing the offset to 1.
Parameter Description
1 $t Tree descriptor
2 $offset Variable containing up offset
3 $zmm Zmm number
4 $transfer Transfer registerNasm::X86::Tree::getCountFromData($t, $zmm, $transfer)
Get the number of keys in the tree. The number of keys in the tree is stored in the up field of the data block associated with the root. If the lowest bit in this field is set then the field is an offset, if it is clear then it is a count.
Parameter Description
1 $t Tree descriptor
2 $zmm Zmm number
3 $transfer Transfer registerNasm::X86::Tree::incCountInData($t, $zmm, $transfer)
Increment the count field in the up field of the data block associate with the root node.
Parameter Description
1 $t Tree descriptor
2 $zmm Zmm number
3 $transfer Transfer registerNasm::X86::Tree::decCountInData($t, $zmm, $transfer)
Decrement the count field in the up field of the data block associate with the root node.
Parameter Description
1 $t Tree descriptor
2 $zmm Zmm number
3 $transfer Transfer registerNasm::X86::Tree::getLoop($t, $zmm, $transfer)
Return the value of the loop field as a variable.
Parameter Description
1 $t Tree descriptor
2 $zmm Numbered zmm
3 $transfer Optional transfer registerNasm::X86::Tree::putLoop($t, $value, $zmm, $transfer)
Set the value of the loop field from a variable.
Parameter Description
1 $t Tree descriptor
2 $value Variable containing offset of next loop entry
3 $zmm Numbered zmm
4 $transfer Optional transfer registerNasm::X86::Tree::nodeFromData($t, $data, $node)
Load the the node block into the numbered zmm corresponding to the data block held in the numbered zmm.
Parameter Description
1 $t Tree descriptor
2 $data Numbered zmm containing data
3 $node Numbered zmm to hold node blockNasm::X86::Tree::address($t)
Address of the arena containing a tree.
Parameter Description
1 $t Tree descriptorNasm::X86::Tree::allocBlock($t, $bs)
Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
Parameter Description
1 $t Tree descriptor
2 $bs VariablesNasm::X86::Tree::testTree($t, $position, $zmm)
Set the Zero Flag to oppose the tree bit indexed by the specified variable in the numbered zmm register holding the keys of a node to indicate whether the data element indicated by the specified register is an offset to a sub tree in the containing arena or not.
Parameter Description
1 $t Tree descriptor
2 $position Variable holding index of position to test
3 $zmm Numbered zmm register holding the keys for a node in the treeNasm::X86::Tree::isTree($t, $register, $zmm)
Set the Zero Flag to oppose the tree bit in the numbered zmm register holding the keys of a node to indicate whether the data element indicated by the specified register is an offset to a sub tree in the containing arena or not.
Parameter Description
1 $t Tree descriptor
2 $register Word register holding a bit shifted into the position to test
3 $zmm Numbered zmm register holding the keys for a node in the treeNasm::X86::Tree::setOrClearTree($t, $set, $register, $zmm)
Set or clear the tree bit in the numbered zmm register holding the keys of a node to indicate that the data element indicated by the specified register is an offset to a sub tree in the containing arena.
Parameter Description
1 $t Tree descriptor
2 $set Set if true else clear
3 $register Register holding a single one in the lowest 14 bits at the insertion point
4 $zmm Numbered zmm register holding the keys for a node in the treeNasm::X86::Tree::setTree($t, $register, $zmm)
Set the tree bit in the numbered zmm register holding the keys of a node to indicate that the data element indexed by the specified register is an offset to a sub tree in the containing arena.
Parameter Description
1 $t Tree descriptor
2 $register Register holding data element index 0..13
3 $zmm Numbered zmm register holding the keys for a node in the treeNasm::X86::Tree::clearTree($t, $register, $zmm)
Clear the tree bit in the numbered zmm register holding the keys of a node to indicate that the data element indexed by the specified register is an offset to a sub tree in the containing arena.
Parameter Description
1 $t Tree descriptor
2 $register Register holding data element index 0..13
3 $zmm Numbered zmm register holding the keys for a node in the treeNasm::X86::Tree::getTreeBits($t, $zmm, $register)
Load the tree bits from the numbered zmm into the specified register.
Parameter Description
1 $t Tree descriptor
2 $zmm Numbered zmm
3 $register Target registerNasm::X86::Tree::putTreeBits($t, $zmm, $register)
Put the tree bits in the specified register into the numbered zmm.
Parameter Description
1 $t Tree descriptor
2 $zmm Numbered zmm
3 $register Target registerNasm::X86::Tree::expandTreeBitsWithZeroOrOne($t, $onz, $zmm, $point)
Insert a zero or one into the tree bits field in the numbered zmm at the specified point.
Parameter Description
1 $t Tree descriptor
2 $onz 0 - zero or 1 - one
3 $zmm Numbered zmm
4 $point Register indicating pointNasm::X86::Tree::expandTreeBitsWithZero($t, $zmm, $point)
Insert a zero into the tree bits field in the numbered zmm at the specified point.
Parameter Description
1 $t Tree descriptor
2 $zmm Numbered zmm
3 $point Register indicating pointNasm::X86::Tree::expandTreeBitsWithOne($t, $zmm, $point)
Insert a one into the tree bits field in the numbered zmm at the specified point.
Parameter Description
1 $t Tree descriptor
2 $zmm Numbered zmm
3 $point Register indicating pointLocateIntelEmulator()
Locate the Intel Software Development Emulator.
getInstructionCount()
Get the number of instructions executed from the emulator mix file.
Optimize(%options)
Perform code optimizations.
Parameter Description
1 %options OptionsremoveNonAsciiChars($string)
Return a copy of the specified string with all the non ascii characters removed.
Parameter Description
1 $string StringtotalBytesAssembled()
Total size in bytes of all files assembled during testing.
Index
1 All8Structure - Create a structure consisting of 8 byte fields.
2 AllocateAll8OnStack - Create a local data descriptor consisting of the specified number of 8 byte local variables and return an array: (local data descriptor, variable definitions.
3 AllocateMemory - Allocate the specified amount of memory via mmap and return its address.
4 AndBlock - Short circuit and: execute a block of code to test conditions which, if all of them pass, allows the first block to continue successfully else if one of the conditions fails we execute the optional fail block.
5 Assemble - Assemble the generated code.
6 CallC - Call a C subroutine.
7 CheckGeneralPurposeRegister - Check that a register is in fact a general purpose register.
8 CheckMaskRegister - Check that a register is in fact a mask register.
9 CheckNumberedGeneralPurposeRegister - Check that a register is in fact a numbered general purpose register.
10 ChooseRegisters - Choose the specified numbers of registers excluding those on the specified list.
11 ClassifyInRange - Character classification: classify the utf32 characters in a block of memory of specified length using a range specification held in zmm0, zmm1 formatted in double words with each word in zmm1 having the classification in the highest 8 bits and with zmm0 and zmm1 having the utf32 character at the start (zmm0) and end (zmm1) of each range in the lower 21 bits.
12 ClassifyRange - Implementation of ClassifyInRange and ClassifyWithinRange.
13 ClassifyWithInRange - Bracket classification: Classify the utf32 characters in a block of memory of specified length using a range specification held in zmm0, zmm1 formatted in double words with the classification range in the highest 8 bits of zmm0 and zmm1 and the utf32 character at the start (zmm0) and end (zmm1) of each range in the lower 21 bits.
14 ClassifyWithInRangeAndSaveOffset - Alphabetic classification: classify the utf32 characters in a block of memory of specified length using a range specification held in zmm0, zmm1 formatted in double words with the classification code in the high byte of zmm1 and the offset of the first element in the range in the high byte of zmm0.
15 ClearMemory - Clear memory.
16 ClearRegisters - Clear registers by setting them to zero.
17 ClearZF - Clear the zero flag.
18 CloseFile - Close the file whose descriptor is in rax.
19 Comment - Insert a comment into the assembly code.
20 CommentWithTraceBack - Insert a comment into the assembly code with a traceback showing how it was generated.
21 ConvertUtf8ToUtf32 - Convert a string of utf8 to an allocated block of utf32 and return its address and length.
22 CopyMemory - Copy memory, the target is addressed by rax, the length is in rdi, the source is addressed by rsi.
23 cr - Call a subroutine with a reordering of the registers.
24 CreateArena - Create an relocatable arena and returns its address in rax.
25 CreateShortString - Create a description of a short string.
26 Cstrlen - Length of the C style string addressed by rax returning the length in r15.
27 Db - Layout bytes in the data segment and return their label.
28 Dbwdq - Layout data.
29 DComment - Insert a comment into the data segment.
30 Dd - Layout double words in the data segment and return their label.
31 Dq - Layout quad words in the data segment and return their label.
32 Ds - Layout bytes in memory and return their label.
33 Dw - Layout words in the data segment and return their label.
34 Ef - Else if block for an If statement.
35 Else - Else block for an If statement.
36 executeFileViaBash - Execute the file named in the arena addressed by rax with bash.
37 Exit - Exit with the specified return code or zero if no return code supplied.
38 Extern - Name external references.
39 Fail - Fail block for an AndBlock.
40 For - For - iterate the block as long as register is less than limit incrementing by increment each time.
41 ForEver - Iterate for ever.
42 ForIn - For - iterate the full block as long as register plus increment is less than than limit incrementing by increment each time then increment the last block for the last non full block.
43 Fork - Fork.
44 FreeMemory - Free memory.
45 G - Define a global variable.
46 getBFromXmm - Get the byte from the numbered xmm register and return it in a variable.
47 getBFromZmm - Get the byte from the numbered zmm register and return it in a variable.
48 getBwdqFromMm - Get the numbered byte|word|double word|quad word from the numbered zmm register and return it in a variable.
49 getDFromXmm - Get the double word from the numbered xmm register and return it in a variable.
50 getDFromZmm - Get the double word from the numbered zmm register and return it in a variable.
51 getInstructionCount - Get the number of instructions executed from the emulator mix file.
52 GetNextUtf8CharAsUtf32 - Get the next utf8 encoded character from the addressed memory and return it as a utf32 char.
53 GetPid - Get process identifier.
54 GetPidInHex - Get process identifier in hex as 8 zero terminated bytes in rax.
55 GetPPid - Get parent process identifier.
56 getQFromXmm - Get the quad word from the numbered xmm register and return it in a variable.
57 getQFromZmm - Get the quad word from the numbered zmm register and return it in a variable.
58 GetUid - Get userid of current process.
59 getWFromXmm - Get the word from the numbered xmm register and return it in a variable.
60 getWFromZmm - Get the word from the numbered zmm register and return it in a variable.
61 Hash - Hash a string addressed by rax with length held in rdi and return the hash code in r15.
62 hexTranslateTable - Create/address a hex translate table and return its label.
63 If - If.
64 IfC - If the carry flag is set then execute the then block else the else block.
65 IfEq - If equal execute the then block else the else block.
66 IfGe - If greater than or equal execute the then block else the else block.
67 IfGt - If greater than execute the then block else the else block.
68 IfLe - If less than or equal execute the then block else the else block.
69 IfLt - If less than execute the then block else the else block.
70 IfNc - If the carry flag is not set then execute the then block else the else block.
71 IfNe - If not equal execute the then block else the else block.
72 IfNz - If the zero flag is not set then execute the then block else the else block.
73 IfZ - If the zero flag is set then execute the then block else the else block.
74 InsertOneIntoRegisterAtPoint - Insert a one into the specified register at the point indicated by another register.
75 InsertZeroIntoRegisterAtPoint - Insert a zero into the specified register at the point indicated by another register.
76 K - Define a constant variable.
77 Label - Create a unique label or reuse the one supplied.
78 Link - Libraries to link with.
79 LoadBitsIntoMaskRegister - Load a bit string specification into a mask register.
80 LoadConstantIntoMaskRegister - Set a mask register equal to a constant.
81 loadFromZmm - Load the specified register from the offset located in the numbered zmm.
82 LoadRegFromMm - Load the specified register from the numbered zmm at the quad offset specified as a constant number.
83 LoadZmm - Load a numbered zmm with the specified bytes.
84 LocalData - Map local data.
85 LocateIntelEmulator - Locate the Intel Software Development Emulator.
86 Macro - Create a sub with optional parameters name=> the name of the subroutine so it can be reused rather than regenerated, comment=> a comment describing the sub.
87 MaskMemory22 - Write the specified byte into locations in the target mask that correspond to the locations in the source that contain the specified byte.
88 MaskMemoryInRange4_22 - Write the specified byte into locations in the target mask that correspond to the locations in the source that contain 4 bytes in the specified range.
89 Nasm::X86::Arena::allocate - Allocate the amount of space indicated in rdi in the arena addressed by rax and return the offset of the allocation in the arena in rdi.
90 Nasm::X86::Arena::allocBlock - Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
91 Nasm::X86::Arena::allocZmmBlock - Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
92 Nasm::X86::Arena::append - Append one arena to another.
93 Nasm::X86::Arena::arenaSize - Get the size of an arena.
94 Nasm::X86::Arena::blockSize - Size of a block.
95 Nasm::X86::Arena::chain - Return a variable with the end point of a chain of double words in the arena starting at the specified variable.
96 Nasm::X86::Arena::char - Append a character expressed as a decimal number to the arena addressed by rax.
97 Nasm::X86::Arena::clear - Clear the arena addressed by rax.
98 Nasm::X86::Arena::CreateArray - Create a array in an arena.
99 Nasm::X86::Arena::CreateQuarks - Create quarks in a specified arena.
100 Nasm::X86::Arena::CreateString - Create a string from a doubly link linked list of 64 byte blocks linked via 4 byte offsets in an arena and return its descriptor.
101 Nasm::X86::Arena::CreateTree - Create a tree in an arena.
102 Nasm::X86::Arena::DescribeQuarks - Return a descriptor for a tree in the specified arena.
103 Nasm::X86::Arena::DescribeString - Describe a string.
104 Nasm::X86::Arena::DescribeTree - Return a descriptor for a tree in the specified arena.
105 Nasm::X86::Arena::dump - Dump details of an arena.
106 Nasm::X86::Arena::firstFreeBlock - Create and load a variable with the first free block on the free block chain or zero if no such block in the given arena.
107 Nasm::X86::Arena::freeBlock - Free a block in an arena by placing it on the free chain.
108 Nasm::X86::Arena::getBlock - Get the block with the specified offset in the specified string and return it in the numbered zmm.
109 Nasm::X86::Arena::length - Get the length of an arena.
110 Nasm::X86::Arena::m - Append the content with length rdi addressed by rsi to the arena addressed by rax.
111 Nasm::X86::Arena::makeReadOnly - Make an arena read only.
112 Nasm::X86::Arena::makeWriteable - Make an arena writable.
113 Nasm::X86::Arena::nl - Append a new line to the arena addressed by rax.
114 Nasm::X86::Arena::out - Print the specified arena addressed by rax on sysout.
115 Nasm::X86::Arena::putBlock - Write the numbered zmm to the block at the specified offset in the specified arena.
116 Nasm::X86::Arena::putChain - Write the double word in the specified variable to the double word location at the the specified offset in the specified arena.
117 Nasm::X86::Arena::q - Append a constant string to the arena.
118 Nasm::X86::Arena::ql - Append a quoted string containing new line characters to the arena addressed by rax.
119 Nasm::X86::Arena::read - Read the named file (terminated with a zero byte) and place it into the named arena.
120 Nasm::X86::Arena::setFirstFreeBlock - Set the first free block field from a variable.
121 Nasm::X86::Arena::updateSpace - Make sure that the arena addressed by rax has enough space to accommodate content of length rdi.
122 Nasm::X86::Arena::write - Write the content in an arena addressed by rax to a temporary file and replace the arena content with the name of the temporary file.
123 Nasm::X86::Arena::z - Append a trailing zero to the arena addressed by rax.
124 Nasm::X86::Array::address - Address of a string.
125 Nasm::X86::Array::allocBlock - Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
126 Nasm::X86::Array::dump - Dump a array.
127 Nasm::X86::Array::get - Get an element from the array.
128 Nasm::X86::Array::pop - Pop an element from an array.
129 Nasm::X86::Array::push - Push an element onto the array.
130 Nasm::X86::Array::put - Put an element into an array as long as it is with in its limits established by pushing.
131 Nasm::X86::Array::size - Return the size of an array as a variable.
132 Nasm::X86::LocalData::allocate8 - Add some 8 byte local variables and return an array of variable definitions.
133 Nasm::X86::LocalData::free - Free a local data area on the stack.
134 Nasm::X86::LocalData::start - Start a local data area on the stack.
135 Nasm::X86::LocalData::variable - Add a local variable.
136 Nasm::X86::LocalVariable::stack - Address a local variable on the stack.
137 Nasm::X86::Quarks::quarkFromShortString - Create a quark from a short string.
138 Nasm::X86::Quarks::shortStringFromQuark - Load a short string from the quark with the specified number.
139 Nasm::X86::ShortString::append - Append the right hand short string to the left hand short string.
140 Nasm::X86::ShortString::appendByte - Append the lowest variable byte to the specified string.
141 Nasm::X86::ShortString::clear - Clear a short string.
142 Nasm::X86::ShortString::len - Return the length of a short string in a variable.
143 Nasm::X86::ShortString::load - Load the variable addressed data with the variable length into the short string.
144 Nasm::X86::ShortString::loadDwordBytes - Load the specified byte of each dword in the variable addressed data with the variable length into the short string.
145 Nasm::X86::ShortString::setLength - Set the length of the short string.
146 Nasm::X86::String::address - Address of a string.
147 Nasm::X86::String::allocBlock - Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
148 Nasm::X86::String::append - Append the specified content in memory to the specified string.
149 Nasm::X86::String::appendShortString - Append the content of the specified short string.
150 Nasm::X86::String::clear - Clear the block by freeing all but the first block.
151 Nasm::X86::String::concatenate - Concatenate two strings by appending a copy of the source to the target string.
152 Nasm::X86::String::deleteChar - Delete a character in a string.
153 Nasm::X86::String::dump - Dump a string to sysout.
154 Nasm::X86::String::getBlock - Get the block with the specified offset in the specified string and return it in the numbered zmm.
155 Nasm::X86::String::getBlockLength - Get the block length of the numbered zmm and return it in a variable.
156 Nasm::X86::String::getCharacter - Get a character from a string.
157 Nasm::X86::String::getNextAndPrevBlockOffsetFromZmm - Get the offsets of the next and previous blocks as variables from the specified zmm.
158 Nasm::X86::String::insertChar - Insert a character into a string.
159 Nasm::X86::String::len - Find the length of a string.
160 Nasm::X86::String::putBlock - Write the numbered zmm to the block at the specified offset in the specified arena.
161 Nasm::X86::String::putNextandPrevBlockOffsetIntoZmm - Save next and prev offsets into a zmm representing a block.
162 Nasm::X86::String::saveToShortString - Place as much as possible of the specified string into the specified short string.
163 Nasm::X86::String::setBlockLengthInZmm - Set the block length of the numbered zmm to the specified length.
164 Nasm::X86::Structure::field - Add a field of the specified length with an optional comment.
165 Nasm::X86::StructureField::addr - Address a field in a structure by either the default register or the named register.
166 Nasm::X86::Sub::call - Call a sub passing it some parameters.
167 Nasm::X86::Sub::callTo - Call a sub passing it some parameters.
168 Nasm::X86::Sub::V - Put the address of a subroutine into a stack variable so that it can be passed as a parameter.
169 Nasm::X86::Sub::via - Call a sub by reference passing it some parameters.
170 Nasm::X86::Tree::address - Address of the arena containing a tree.
171 Nasm::X86::Tree::allocBlock - Allocate a block to hold a zmm register in the specified arena and return the offset of the block in a variable.
172 Nasm::X86::Tree::allocKeysDataNode - Allocate a keys/data/node block and place it in the numbered zmm registers.
173 Nasm::X86::Tree::by - Call the specified block with each (key, data) from the specified tree in order.
174 Nasm::X86::Tree::clearTree - Clear the tree bit in the numbered zmm register holding the keys of a node to indicate that the data element indexed by the specified register is an offset to a sub tree in the containing arena.
175 Nasm::X86::Tree::decCountInData - Decrement the count field in the up field of the data block associate with the root node.
176 Nasm::X86::Tree::depth - Return the depth of a node within a tree.
177 Nasm::X86::Tree::dump - Dump a tree and all its sub trees.
178 Nasm::X86::Tree::expandTreeBitsWithOne - Insert a one into the tree bits field in the numbered zmm at the specified point.
179 Nasm::X86::Tree::expandTreeBitsWithZero - Insert a zero into the tree bits field in the numbered zmm at the specified point.
180 Nasm::X86::Tree::expandTreeBitsWithZeroOrOne - Insert a zero or one into the tree bits field in the numbered zmm at the specified point.
181 Nasm::X86::Tree::find - Find a key in a tree and test whether the found data is a sub tree.
182 Nasm::X86::Tree::findAndReload - Find a key in the specified tree and clone it is it is a sub tree.
183 Nasm::X86::Tree::findAndSplit - Find a key in a tree which is known to contain at least one key splitting full nodes along the path to the key.
184 Nasm::X86::Tree::findShortString - Find the data at the end of a key chain held in a short string.
185 Nasm::X86::Tree::getCountFromData - Get the number of keys in the tree.
186 Nasm::X86::Tree::getKeysData - Load the keys and data blocks for a node.
187 Nasm::X86::Tree::getKeysDataNode - Load the keys, data and child nodes for a node.
188 Nasm::X86::Tree::getLengthInKeys - Get the length of the keys block in the numbered zmm and return it as a variable.
189 Nasm::X86::Tree::getLoop - Return the value of the loop field as a variable.
190 Nasm::X86::Tree::getTreeBits - Load the tree bits from the numbered zmm into the specified register.
191 Nasm::X86::Tree::getUpFromData - Get the decompressed up offset from the data block in the numbered zmm and return it as a variable.
192 Nasm::X86::Tree::getUpFromData11 - Get the up offset from the data block in the numbered zmm and return it as a variable.
193 Nasm::X86::Tree::getUpFromDataNM - Get the compressed up offset//count from the data block in the numbered zmm and return it as a variable.
194 Nasm::X86::Tree::incCountInData - Increment the count field in the up field of the data block associate with the root node.
195 Nasm::X86::Tree::insert - Insert a dword into into the specified tree at the specified key.
196 Nasm::X86::Tree::insertDataOrTree - Insert either a key, data pair into the tree or create a sub tree at the specified key (if it does not already exist) and return the offset of the first block of the sub tree in the data variable.
197 Nasm::X86::Tree::insertShortString - Insert some data at the end of a chain of sub trees keyed by the contents of a short string.
198 Nasm::X86::Tree::insertTree - Insert a sub tree into the specified tree tree under the specified key.
199 Nasm::X86::Tree::insertTreeAndReload - Insert a new sub tree into the specified tree tree under the specified key and return a descriptor for it.
200 Nasm::X86::Tree::isTree - Set the Zero Flag to oppose the tree bit in the numbered zmm register holding the keys of a node to indicate whether the data element indicated by the specified register is an offset to a sub tree in the containing arena or not.
201 Nasm::X86::Tree::iterator - Iterate through a multi way tree starting either at the specified node or the first node of the specified tree.
202 Nasm::X86::Tree::Iterator::next - Next element in the tree.
203 Nasm::X86::Tree::leftMost - Return the offset of the left most node from the specified node.
204 Nasm::X86::Tree::leftOrRightMost - Return the offset of the left most or right most node.
205 Nasm::X86::Tree::nodeFromData - Load the the node block into the numbered zmm corresponding to the data block held in the numbered zmm.
206 Nasm::X86::Tree::print - Print a tree.
207 Nasm::X86::Tree::putKeysData - Save the key and data blocks for a node.
208 Nasm::X86::Tree::putKeysDataNode - Save the keys, data and child nodes for a node.
209 Nasm::X86::Tree::putLengthInKeys - Get the length of the block in the numbered zmm from the specified variable.
210 Nasm::X86::Tree::putLoop - Set the value of the loop field from a variable.
211 Nasm::X86::Tree::putTreeBits - Put the tree bits in the specified register into the numbered zmm.
212 Nasm::X86::Tree::putUpIntoData - Put the offset of the parent keys block expressed as a variable into the numbered zmm.
213 Nasm::X86::Tree::putUpIntoData11 - Put the offset of the parent keys block expressed as a variable into the numbered zmm.
214 Nasm::X86::Tree::Reload - Reload the specified tree descriptions.
215 Nasm::X86::Tree::reParent - Reparent the children of a node held in registers.
216 Nasm::X86::Tree::rightMost - Return the offset of the left most node from the specified node.
217 Nasm::X86::Tree::setOrClearTree - Set or clear the tree bit in the numbered zmm register holding the keys of a node to indicate that the data element indicated by the specified register is an offset to a sub tree in the containing arena.
218 Nasm::X86::Tree::setTree - Set the tree bit in the numbered zmm register holding the keys of a node to indicate that the data element indexed by the specified register is an offset to a sub tree in the containing arena.
219 Nasm::X86::Tree::size - Return a variable containing the number of keys in the specified tree.
220 Nasm::X86::Tree::splitFullLeftNode - Split a full left node block held in 28.
221 Nasm::X86::Tree::splitFullLeftOrRightNode - Split a full a full left node (held in 28.
222 Nasm::X86::Tree::splitFullRightNode - Split a full right node block held in 25.
223 Nasm::X86::Tree::splitFullRoot - Split a full root block held in 31.
224 Nasm::X86::Tree::splitNode - Split a non root node given its offset in an arena retaining the key being inserted in the node being split while putting the remainder to the left or right.
225 Nasm::X86::Tree::testTree - Set the Zero Flag to oppose the tree bit indexed by the specified variable in the numbered zmm register holding the keys of a node to indicate whether the data element indicated by the specified register is an offset to a sub tree in the containing arena or not.
226 Nasm::X86::Tree::transferTreeBitsFromLeft - Transfer tree bits when splitting a full left node.
227 Nasm::X86::Tree::transferTreeBitsFromLeftOrRight - Transfer tree bits when splitting a full left or right node.
228 Nasm::X86::Tree::transferTreeBitsFromParent - Transfer tree bits when splitting a full node.
229 Nasm::X86::Tree::transferTreeBitsFromRight - Transfer tree bits when splitting a full right node.
230 Nasm::X86::Variable::add - Add the right hand variable to the left hand variable and return the result as a new variable.
231 Nasm::X86::Variable::address - Get the address of a variable with an optional offset.
232 Nasm::X86::Variable::allocateMemory - Allocate the specified amount of memory via mmap and return its address.
233 Nasm::X86::Variable::and - And two variables.
234 Nasm::X86::Variable::arithmetic - Return a variable containing the result of an arithmetic operation on the left hand and right hand side variables.
235 Nasm::X86::Variable::assign - Assign to the left hand side the value of the right hand side.
236 Nasm::X86::Variable::boolean - Combine the left hand variable with the right hand variable via a boolean operator.
237 Nasm::X86::Variable::booleanC - Combine the left hand variable with the right hand variable via a boolean operator using a conditional move instruction.
238 Nasm::X86::Variable::booleanZF - Combine the left hand variable with the right hand variable via a boolean operator and indicate the result by setting the zero flag if the result is true.
239 Nasm::X86::Variable::clearBit - Clear a bit in the specified mask register retaining the other bits.
240 Nasm::X86::Variable::clearMaskBit - Clear a bit in the specified mask register retaining the other bits.
241 Nasm::X86::Variable::clearMemory - Clear the memory described in this variable.
242 Nasm::X86::Variable::copy - Copy one variable into another.
243 Nasm::X86::Variable::copyMemory - Copy from one block of memory to another.
244 Nasm::X86::Variable::copyRef - Copy a reference to a variable.
245 Nasm::X86::Variable::copyZF - Copy the current state of the zero flag into a variable.
246 Nasm::X86::Variable::copyZFInverted - Copy the opposite of the current state of the zero flag into a variable.
247 Nasm::X86::Variable::d - Dump the value of a variable on stderr and append a new line.
248 Nasm::X86::Variable::debug - Dump the value of a variable on stdout with an indication of where the dump came from.
249 Nasm::X86::Variable::dec - Decrement a variable.
250 Nasm::X86::Variable::divide - Divide the left hand variable by the right hand variable and return the result as a new variable.
251 Nasm::X86::Variable::division - Return a variable containing the result or the remainder that occurs when the left hand side is divided by the right hand side.
252 Nasm::X86::Variable::dump - Dump the value of a variable to the specified channel adding an optional title and new line if requested.
253 Nasm::X86::Variable::eq - Check whether the left hand variable is equal to the right hand variable.
254 Nasm::X86::Variable::equals - Equals operator.
255 Nasm::X86::Variable::err - Dump the value of a variable on stderr.
256 Nasm::X86::Variable::errNL - Dump the value of a variable on stderr and append a new line.
257 Nasm::X86::Variable::for - Iterate the block limit times.
258 Nasm::X86::Variable::freeMemory - Free the memory addressed by this variable for the specified length.
259 Nasm::X86::Variable::ge - Check whether the left hand variable is greater than or equal to the right hand variable.
260 Nasm::X86::Variable::getBFromZmm - Get the byte from the numbered zmm register and put it in a variable.
261 Nasm::X86::Variable::getConst - Load the variable from a constant in effect setting a variable to a specified value.
262 Nasm::X86::Variable::getConst22 - Load the variable from a constant in effect setting a variable to a specified value.
263 Nasm::X86::Variable::getDFromZmm - Get the double word from the numbered zmm register and put it in a variable.
264 Nasm::X86::Variable::getQFromZmm - Get the quad word from the numbered zmm register and put it in a variable.
265 Nasm::X86::Variable::getReg - Load the variable from the named registers.
266 Nasm::X86::Variable::getWFromZmm - Get the word from the numbered zmm register and put it in a variable.
267 Nasm::X86::Variable::gt - Check whether the left hand variable is greater than the right hand variable.
268 Nasm::X86::Variable::inc - Increment a variable.
269 Nasm::X86::Variable::incDec - Increment or decrement a variable.
270 Nasm::X86::Variable::isRef - Check whether the specified variable is a reference to another variable.
271 Nasm::X86::Variable::le - Check whether the left hand variable is less than or equal to the right hand variable.
272 Nasm::X86::Variable::loadZmm - Load bytes from the memory addressed by the specified source variable into the numbered zmm register.
273 Nasm::X86::Variable::lt - Check whether the left hand variable is less than the right hand variable.
274 Nasm::X86::Variable::max - Maximum of two variables.
275 Nasm::X86::Variable::min - Minimum of two variables.
276 Nasm::X86::Variable::minusAssign - Implement minus and assign.
277 Nasm::X86::Variable::mod - Divide the left hand variable by the right hand variable and return the remainder as a new variable.
278 Nasm::X86::Variable::ne - Check whether the left hand variable is not equal to the right hand variable.
279 Nasm::X86::Variable::or - Or two variables.
280 Nasm::X86::Variable::out - Dump the value of a variable on stdout.
281 Nasm::X86::Variable::outNL - Dump the value of a variable on stdout and append a new line.
282 Nasm::X86::Variable::plusAssign - Implement plus and assign.
283 Nasm::X86::Variable::pop - Pop a variable from the stack.
284 Nasm::X86::Variable::printErrMemoryInHexNL - Write the memory addressed by a variable to stderr.
285 Nasm::X86::Variable::printMemoryInHexNL - Write, in hexadecimal, the memory addressed by a variable to stdout or stderr.
286 Nasm::X86::Variable::printOutMemoryInHexNL - Write the memory addressed by a variable to stdout.
287 Nasm::X86::Variable::push - Push a variable onto the stack.
288 Nasm::X86::Variable::putBIntoXmm - Place the value of the content variable at the byte in the numbered xmm register.
289 Nasm::X86::Variable::putBIntoZmm - Place the value of the content variable at the byte in the numbered zmm register.
290 Nasm::X86::Variable::putBwdqIntoMm - Place the value of the content variable at the byte|word|double word|quad word in the numbered zmm register.
291 Nasm::X86::Variable::putDIntoXmm - Place the value of the content variable at the double word in the numbered xmm register.
292 Nasm::X86::Variable::putDIntoZmm - Place the value of the content variable at the double word in the numbered zmm register.
293 Nasm::X86::Variable::putQIntoXmm - Place the value of the content variable at the quad word in the numbered xmm register.
294 Nasm::X86::Variable::putQIntoZmm - Place the value of the content variable at the quad word in the numbered zmm register.
295 Nasm::X86::Variable::putWIntoXmm - Place the value of the content variable at the word in the numbered xmm register.
296 Nasm::X86::Variable::putWIntoZmm - Place the value of the content variable at the word in the numbered zmm register.
297 Nasm::X86::Variable::setBit - Set a bit in the specified register retaining the other bits.
298 Nasm::X86::Variable::setMask - Set the mask register to ones starting at the specified position for the specified length and zeroes elsewhere.
299 Nasm::X86::Variable::setMaskBit - Set a bit in the specified mask register retaining the other bits.
300 Nasm::X86::Variable::setMaskFirst - Set the first bits in the specified mask register.
301 Nasm::X86::Variable::setReg - Set the named registers from the content of the variable.
302 Nasm::X86::Variable::setZmm - Load bytes from the memory addressed by specified source variable into the numbered zmm register at the offset in the specified offset moving the number of bytes in the specified variable.
303 Nasm::X86::Variable::str - The name of the variable.
304 Nasm::X86::Variable::sub - Subtract the right hand variable from the left hand variable and return the result as a new variable.
305 Nasm::X86::Variable::times - Multiply the left hand variable by the right hand variable and return the result as a new variable.
306 Nasm::X86::Variable::zBroadCastD - Broadcast a double word in a variable into the numbered zmm.
307 OnSegv - Request a trace back followed by exit on a segv signal.
308 OpenRead - Open a file, whose name is addressed by rax, for read and return the file descriptor in rax.
309 OpenWrite - Create the file named by the terminated string addressed by rax for write.
310 Optimize - Perform code optimizations.
311 OrBlock - Short circuit or: execute a block of code to test conditions which, if one of them is met, leads on to the execution of the pass block, if all of the tests fail we continue withe the test block.
312 Pass - Pass block for an OrBlock.
313 PeekR - Peek at register on stack.
314 PopEax - We cannot pop a double word from the stack in 64 bit long mode using pop so we improvise.
315 PopMask - Pop Mask registers.
316 PopR - Pop registers from the stack.
317 PopRR - Pop registers from the stack without tracking.
318 PopZmm - Pop zmm registers.
319 PrintErrMemory - Print the memory addressed by rax for a length of rdi on stderr.
320 PrintErrMemoryInHex - Dump memory from the address in rax for the length in rdi on stderr.
321 PrintErrMemoryInHexNL - Dump memory from the address in rax for the length in rdi and then print a new line.
322 PrintErrMemoryNL - Print the memory addressed by rax for a length of rdi followed by a new line on stderr.
323 PrintErrNL - Print a new line to stderr.
324 PrintErrRaxInHex - Write the content of register rax in hexadecimal in big endian notation to stderr.
325 PrintErrRegisterInHex - Print the named registers as hex strings on stderr.
326 PrintErrSpace - Print one or more spaces to stderr.
327 PrintErrString - Print a constant string to stderr.
328 PrintErrStringNL - Print a constant string followed by a new line to stderr.
329 PrintErrTraceBack - Print sub routine track back on stderr.
330 PrintErrUtf32 - Print the utf 8 character addressed by rax to stderr.
331 PrintErrUtf8Char - Print the utf 8 character addressed by rax to stderr.
332 PrintErrZF - Print the zero flag without disturbing it on stderr.
333 PrintMemory - Print the memory addressed by rax for a length of rdi on the specified channel.
334 PrintMemoryInHex - Dump memory from the address in rax for the length in rdi on the specified channel.
335 PrintMemoryNL - Print the memory addressed by rax for a length of rdi on the specified channel followed by a new line.
336 PrintNL - Print a new line to stdout or stderr.
337 PrintOneRegisterInHex - Print the named register as a hex strings.
338 PrintOutMemory - Print the memory addressed by rax for a length of rdi on stdout.
339 PrintOutMemoryInHex - Dump memory from the address in rax for the length in rdi on stdout.
340 PrintOutMemoryInHexNL - Dump memory from the address in rax for the length in rdi and then print a new line.
341 PrintOutMemoryNL - Print the memory addressed by rax for a length of rdi followed by a new line on stdout.
342 PrintOutNL - Print a new line to stderr.
343 PrintOutRaxInHex - Write the content of register rax in hexadecimal in big endian notation to stderr.
344 PrintOutRaxInReverseInHex - Write the content of register rax to stderr in hexadecimal in little endian notation.
345 PrintOutRegisterInHex - Print the named registers as hex strings on stdout.
346 PrintOutRegistersInHex - Print the general purpose registers in hex.
347 PrintOutRflagsInHex - Print the flags register in hex.
348 PrintOutRipInHex - Print the instruction pointer in hex.
349 PrintOutSpace - Print one or more spaces to stdout.
350 PrintOutString - Print a constant string to stdout.
351 PrintOutStringNL - Print a constant string followed by a new line to stdout.
352 PrintOutTraceBack - Print sub routine track back on stdout.
353 PrintOutUtf32 - Print the utf 8 character addressed by rax to stdout.
354 PrintOutUtf8Char - Print the utf 8 character addressed by rax to stdout.
355 PrintOutZF - Print the zero flag without disturbing it on stdout.
356 PrintRaxInHex - Write the content of register rax in hexadecimal in big endian notation to the specified channel.
357 PrintRegisterInHex - Print the named registers as hex strings.
358 PrintSpace - Print one or more spaces to the specified channel.
359 PrintString - Print a constant string to the specified channel.
360 PrintStringNL - Print a constant string to the specified channel followed by a new line.
361 PrintTraceBack - Trace the call stack.
362 PrintUtf32 - Print the specified number of utf32 characters at the specified address to the specified channel.
363 PrintUtf8Char - Print the utf 8 character addressed by rax to the specified channel.
364 PushMask - Push several Mask registers.
365 PushR - Push registers onto the stack.
366 PushRR - Push registers onto the stack without tracking.
367 PushZmm - Push several zmm registers.
368 putIntoZmm - Put the specified register into the numbered zmm at the specified offset in the zmm.
369 R - Define a reference variable.
370 Rb - Layout bytes in the data segment and return their label.
371 Rbwdq - Layout data.
372 RComment - Insert a comment into the read only data segment.
373 Rd - Layout double words in the data segment and return their label.
374 ReadFile - Read a file whose name is addressed by rax into memory.
375 ReadTimeStampCounter - Read the time stamp counter and return the time in nanoseconds in rax.
376 RegistersAvailable - Add a new set of registers that are available.
377 RegistersFree - Remove the current set of registers known to be free.
378 RegisterSize - Return the size of a register.
379 removeNonAsciiChars - Return a copy of the specified string with all the non ascii characters removed.
380 ReorderSyscallRegisters - Map the list of registers provided to the 64 bit system call sequence.
381 RestoreFirstFour - Restore the first 4 parameter registers.
382 RestoreFirstFourExceptRax - Restore the first 4 parameter registers except rax so it can return its value.
383 RestoreFirstFourExceptRaxAndRdi - Restore the first 4 parameter registers except rax and rdi so we can return a pair of values.
384 RestoreFirstSeven - Restore the first 7 parameter registers.
385 RestoreFirstSevenExceptRax - Restore the first 7 parameter registers except rax which is being used to return the result.
386 RestoreFirstSevenExceptRaxAndRdi - Restore the first 7 parameter registers except rax and rdi which are being used to return the results.
387 Rq - Layout quad words in the data segment and return their label.
388 Rs - Layout bytes in read only memory and return their label.
389 Rutf8 - Layout a utf8 encoded string as bytes in read only memory and return their label.
390 Rw - Layout words in the data segment and return their label.
391 SaveFirstFour - Save the first 4 parameter registers making any parameter registers read only.
392 SaveFirstSeven - Save the first 7 parameter registers.
393 SaveRegIntoMm - Save the specified register into the numbered zmm at the quad offset specified as a constant number.
394 SetLabel - Create (if necessary) and set a label in the code section returning the label so set.
395 SetMaskRegister - Set the mask register to ones starting at the specified position for the specified length and zeroes elsewhere.
396 SetZF - Set the zero flag.
397 Start - Initialize the assembler.
398 StatSize - Stat a file whose name is addressed by rax to get its size in rax.
399 StringLength - Length of a zero terminated string.
400 Structure - Create a structure addressed by a register.
401 Subroutine - Create a subroutine that can be called in assembler code.
402 SubroutineStartStack - Initialize a new stack frame.
403 Then - Then block for an If statement.
404 totalBytesAssembled - Total size in bytes of all files assembled during testing.
405 unlinkFile - Unlink the named file.
406 UnReorderSyscallRegisters - Recover the initial values in registers that were reordered.
407 V - Define a variable.
408 Variable - Create a new variable with the specified name initialized via an optional expression.
409 WaitPid - Wait for the pid in rax to complete.
410 xmm - Add xmm to the front of a list of register expressions.
411 ymm - Add ymm to the front of a list of register expressions.
412 zmm - Add zmm to the front of a list of register expressions.
Installation
This module is written in 100% Pure Perl and, thus, it is easy to read, comprehend, use, modify and install via cpan:
sudo cpan install Nasm::X86Author
Copyright
Copyright (c) 2016-2021 Philip R Brenan.
This module is free software. It may be used, redistributed and/or modified under the same terms as Perl itself.