/ 
Test2-Harness-1.000155
River stage two • 12 direct dependents • 17 total dependents
/ App::Yath::Options::Runner

NAME

App::Yath::Options::Runner - Runner options for Yath.

DESCRIPTION

This is where command line options for the runner are defined.

PROVIDED OPTIONS

COMMAND OPTIONS

Runner Options

--abort-on-bail
--no-abort-on-bail

Abort all testing if a bail-out is encountered (default: on)

--blib
-b
--no-blib

(Default: include if it exists) Include 'blib/lib' and 'blib/arch' in your module path

--cover
--cover=-silent,1,+ignore,^t/,+ignore,^t2/,+ignore,^xt,+ignore,^test.pl
--no-cover

Use Devel::Cover to calculate test coverage. This disables forking. If no args are specified the following are used: -silent,1,+ignore,^t/,+ignore,^t2/,+ignore,^xt,+ignore,^test.pl

--dump-depmap
--no-dump-depmap

When using staged preload, dump the depmap for each stage as json files

--event-timeout SECONDS
--et SECONDS
--no-event-timeout

Kill test if no output is received within timeout period. (Default: 60 seconds). Add the "# HARNESS-NO-TIMEOUT" comment to the top of a test file to disable timeouts on a per-test basis. This prevents a hung test from running forever.

--include ARG
--include=ARG
-I ARG
-I=ARG
--no-include

Add a directory to your include paths

Can be specified multiple times

--job-count 4
--job-count 8:2
--jobs 4
--jobs 8:2
-j4
-j8:2
--no-job-count

Set the number of concurrent jobs to run. Add a :# if you also wish to designate multiple slots per test. 8:2 means 8 slots, but each test gets 2 slots, so 4 tests run concurrently. Tests can find their concurrency assignemnt in the "T2_HARNESS_MY_JOB_CONCURRENCY" environment variable.

Can also be set with the following environment variables: YATH_JOB_COUNT, T2_HARNESS_JOB_COUNT, HARNESS_JOB_COUNT

--lib
-l
--no-lib

(Default: include if it exists) Include 'lib' in your module path

--nytprof
--no-nytprof

Use Devel::NYTProf on tests. This will set addpid=1 for you. This works with or without fork.

--post-exit-timeout SECONDS
--pet SECONDS
--no-post-exit-timeout

Stop waiting post-exit after the timeout period. (Default: 15 seconds) Some tests fork and allow the parent to exit before writing all their output. If Test2::Harness detects an incomplete plan after the test exits it will monitor for more events until the timeout period. Add the "# HARNESS-NO-TIMEOUT" comment to the top of a test file to disable timeouts on a per-test basis.

--preload-threshold ARG
--preload-threshold=ARG
--Pt ARG
--Pt=ARG
-W ARG
-W=ARG
--no-preload-threshold

Only do preload if at least N tests are going to be run. In some cases a full preload takes longer than simply running the tests, this lets you specify a minimum number of test jobs that will be run for preload to happen. This has no effect for a persistent runner. The default is 0, and it means always preload.

--preloads ARG
--preloads=ARG
--preload ARG
--preload=ARG
-P ARG
-P=ARG
--no-preloads

Preload a module before running tests

Can be specified multiple times

--resource Port
--resource +Test2::Harness::Runner::Resource::Port
-R Port
--no-resource

Use a resource module to assign resource assignments to individual tests

Can be specified multiple times

--runner-id ARG
--runner-id=ARG
--no-runner-id

Runner ID (usually a generated uuid)

--shared-jobs-config .sharedjobslots.yml
--shared-jobs-config relative/path/.sharedjobslots.yml
--shared-jobs-config /absolute/path/.sharedjobslots.yml
--no-shared-jobs-config

Where to look for a shared slot config file. If a filename with no path is provided yath will search the current and all parent directories for the name.

--slots-per-job 2
-x2
--no-slots-per-job

This sets the number of slots each job will use (default 1). This is normally set by the ':#' in '-j#:#'.

Can also be set with the following environment variables: T2_HARNESS_JOB_CONCURRENCY

--switch ARG
--switch=ARG
-S ARG
-S=ARG
--no-switch

Pass the specified switch to perl for each test. This is not compatible with preload.

Can be specified multiple times

--tlib
--no-tlib

(Default: off) Include 't/lib' in your module path

--unsafe-inc
--no-unsafe-inc

perl is removing '.' from @INC as a security concern. This option keeps things from breaking for now.

Can also be set with the following environment variables: PERL_USE_UNSAFE_INC

--use-fork
--fork
--no-use-fork

(default: on, except on windows) Normally tests are run by forking, which allows for features like preloading. This will turn off the behavior globally (which is not compatible with preloading). This is slower, it is better to tag misbehaving tests with the '# HARNESS-NO-PRELOAD' comment in their header to disable forking only for those tests.

Can also be set with the following environment variables: !T2_NO_FORK, T2_HARNESS_FORK, !T2_HARNESS_NO_FORK, YATH_FORK, !YATH_NO_FORK

--use-timeout
--timeout
--no-use-timeout

(default: on) Enable/disable timeouts

SOURCE

The source code repository for Test2-Harness can be found at http://github.com/Test-More/Test2-Harness/.

MAINTAINERS

Chad Granum <exodist@cpan.org>

AUTHORS

Chad Granum <exodist@cpan.org>

COPYRIGHT

Copyright 2020 Chad Granum <exodist7@gmail.com>.

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

See http://dev.perl.org/licenses/