NAME
umls-targetword-senserelate.pl - This program performs target word disambiguation and determines the correct sense of an ambiguous term using semantic similarity measures.
SYNOPSIS
This program assigns senses from the UMLS or a given sense file to ambiguous terms using semantic simlarity or relatedness measures from the UMLS::Similarity package.
USAGE
Usage: umls-targetword-senserelate.pl [OPTIONS] INPUTFILE
OUTPUT
The output files will be stored in the directory "log" or the directory defined by the --log option.
Required Options
INPUTFILE
Input file either in sval2 or plain format. Indicated by the --sval2 or --plain options respectively. The --plain option is the default.
General Options:
--plain
The input format is in plain text. This is the default format.
In plain format each line of the text files contains a single context where the ambiguous word is identified by:
<head item="target word" instance="id" sense="sense">word</head>.
For example:
Paul was named <head item="art" instance="art.30002" sense="art">Art</head> magazine's top collector.
The sense information is optional. If you do not have the sense information either leave it blank such as:
Paul was named <head item="art" instance="art.30002" sense="">Art</head> magazine's top collector.
or do not include the sense tag such as:
Paul was named <head item="art" instance="art.30002">Art</head> magazine's top collector.
If the sense information is not there, then you can not use the --key FILE option
We also added a candidate tag so if would like to specifiy the possible senses for the target word in the instance, you can include a candidate attribute in which the candidate senses are seperated by a comma. For example:
<head item="target word" instance="id" sense="sense" candidate="s1,s2">word</head>.
You must use the --candidate option to actually use the candidate information, otherwise it will be ignored.
--sval2
The format is in sval2 format
--mmxml
The format is in metamap xml (mmxml) format in which each target word thoughis identified by a <Target></Target> tag similar to that of the <Token></Token> tags.
We have a conversion program in the coverters/ directory which will convert plain text into the what we refer to as mm-xml tagged text called: plain2mm-xml.pl
--candidates
This option uses the candidate senses as identified by metamap for the target word. This option can only be used with the --mmxml option.
--cuis
This option uses the CUIs tagged by metamap not the terms
--senses DIR|File
This is the directory that contains the candidate sense file for each target word you are going to disambiguate or just the file itself.
The files for the target word contains the possible senses of the target word.
This may be temporary but right now this is who I have it because often times the possible senses change depending on the version of the UMLS that you are using. I felt this allowed the most flexibility with it.
The naming convention for this is a file called: <target word>.choices
The format for this file is:
<tag>|<target word name>|semantic type|CUIThis format is based on the choice files in the NLM-WSD dataset which we use for our experiments. If you are using the NLM-WSD dataset you can download these choice files from NLM's site. There are the 1999 tagset and the 2007 tagset available.
--log DIR
Directory in which the output files will be stored. Default: log
--compound
Use the compounds in the input text. For the plain and sval2 format these are indicated by an underscore. For example:
white_house
blood_pressure--key
Stores the gold standard information in the <target word>.key file to be used in the evaluation programs. This file is stored in the log directory.
--window NUMBER
The window in which to obtain the context surrounding the ambiguous term.
Default: 2
--restrict
This restricts the window to be contain the context whose terms maps to UMLS, not just any old term
--measure MEASURE
Use the MEASURE module to calculate the semantic similarity. The available measure are: 1. Leacock and Chodorow (1998) referred to as lch 2. Wu and Palmer (1994) referred to as wup 3. The basic path measure referred to as path 4. Rada, et. al. (1989) referred to as cdist 5. Nguyan and Al-Mubaid (2006) referred to as nam 6. Resnik (1996) referred to as res 7. Lin (1988) referred to as lin 8. Jiang and Conrath (1997) referred to as jcn 9. The vector measure referred to as vector
--stoplist FILE
A file containing a list of words to be excluded. This is used in the UMLS::SenseRelate::TargetWord module as well as the vector and lesk measures in the UMLS::Similarity package. The format required is one stopword per line, words are in regular expression format.
For example:
/\b[a-zA-Z]\b/
/\b[aA]board\b/
/\b[aA]bout\b/
/\b[aA]bove\b/
/\b[aA]cross\b/
/\b[aA]fter\b/
/\b[aA]gain\b/The sample file, stoplist-nsp.regex, is under the samples directory. We might change this to require two different stoplists in the future; one for the senserelate program and the other for the relatedness measures.
--trace FILE
This stores the trace information in FILE for debugging purposes.
--version
Displays the version information.
--help
Displays the help information
UMLS-Interface General Options:
--config FILE
This is the configuration file. There are six configuration options that can be used depending on which measure you are using. The path, wup, lch, lin, jcn and res measures require the SAB and REL options to be set while the vector and lesk measures require the SABDEF and RELDEF options.
The SAB and REL options are used to determine which sources and relations the path information is to be obtained from. The format of the configuration file is as follows:
SAB :: <include|exclude> <source1, source2, ... sourceN>
REL :: <include|exclude> <relation1, relation2, ... relationN>For example, if we wanted to use the MSH vocabulary with only the RB/RN relations, the configuration file would be:
SAB :: include MSH
REL :: include RB, RNor
SAB :: include MSH
REL :: exclude PAR, CHDThe SABDEF and RELDEF options are used to determine the sources and relations the extended definition is to be obtained from. We call the definition used by the measure, the extended definition because this may include definitions from related concepts.
The format of the configuration file is as follows:
SABDEF :: <include|exclude> <source1, source2, ... sourceN>
RELDEF :: <include|exclude> <relation1, relation2, ... relationN>The possible relations that can be included in RELDEF are:
1. all of the possible relations in MRREL such as PAR, CHD, ...
2. CUI which refers the concepts definition
3. ST which refers to the concepts semantic types definition
4. TERM which refers to the concepts associated termsFor example, if we wanted to use the definitions from MSH vocabulary and we only wanted the definition of the CUI and the definitions of the CUIs SIB relation, the configuration file would be:
SABDEF :: include MSH
RELDEF :: include CUI, SIBNote: RELDEF takes any of MRREL relations and two special 'relations':
1. CUI which refers to the CUIs definition
2. TERM which refers to the terms associated with the CUIIf you go to the configuration file directory, there will be example configuration files for the different runs that you have performed.
For more information about the configuration options (including the RELA and RELADEF options) please see the README.
--realtime
This option will not create a database of the path information for all of concepts in the specified set of sources and relations in the config file but obtain the information for just the input concept
--forcerun
This option will bypass any command prompts such as asking if you would like to continue with the index creation.
--loadcache FILE
FILE containing similarity scores of cui pairs in the following format:
score<>CUI1<>CUI2--getcache FILE
Outputs the cache into FILE once the program has finished.
UMLS-Interface Debug Options:
--debug
Sets the UMLS-Interface debug flag on for testing
UMLS-Interface Database Options:
--username STRING
Username is required to access the umls database on mysql
--password STRING
Password is required to access the umls database on mysql
--hostname STRING
Hostname where mysql is located. DEFAULT: localhost
--database STRING
Database contain UMLS DEFAULT: umls
UMLS-Similarity IC Measure Options:
--icpropagation FILE
FILE containing the propagation counts of the CUIs. This file must be in the following format:
CUI<>probabilitywhere probability is the probability of the concept occurring.
See create-icpropagation.pl for more information.
UMLS-Similarity Vector Measure Options:
--vectormatrix FILE
This is the matrix file that contains the vector information to use with the vector measure.
If you do not want to use the default, this file is generated by the vector-input.pl program. An example of this file can be found in the samples/ directory and is called matrix.
--vectorindex FILE
This is the index file that contains the vector information to use with the vector measure.
If you do not want to use the default, this file is generated by the vector-input.pl program. An example of this file can be found in the samples/ directory and is called index.
--debugfile FILE
This prints the vector information to file, FILE, for debugging purposes.
UMLS-Similarity vector and lesk Options:
--vectorstoplist FILE
A file containing a list of words to be excluded from the vector measure calculation. This is the same format as the --stopword option.
head3 --leskstoplist FILE
A file containing a list of words to be excluded from the lesk measure calculation. This is the same format as the --stopword option.
--dictfile FILE
This is a dictionary file for the vector or lesk measure. It contains the 'definitions' of a concept or term which would be used rather than the definitions from the UMLS. If you would like to use dictfile as a augmentation of the UMLS definitions, then use the --config option in conjunction with the --dictfile option.
The expect format for the --dictfile file is:
CUI: <definition>
CUI: <definition>
TERM: <definition>
TERM: <definition>There are three different option configurations that you have with the --dictfile.
1. No --dictfile - which will use the UMLS definitions
umls-targetword-senserelate.pl --measure lesk hand foot2. --dictfile - which will just use the dictfile definitions
umls-targetword-senserelate.pl --measure lesk --dictfile samples/dictfile hand foot3. --dictfile + --config - which will use both the UMLS and dictfile definitions
umls-targetword-senserelate.pl --measure lesk --dictfile samples/dictfile --config
configuration hand footKeep in mind, when using this file with the --config option, if one of the CUIs or terms that you are obtaining the similarity for does not exist in the file the vector will be empty which will lead to strange similarity scores.
An example of this file can be found in the samples/ directory and is called dictfile.
--defraw
This is a flag for the vector measures. The definitions used are 'cleaned'. If the --defraw flag is set they will not be cleaned.
--stem
This is a flag for the vector and lesk method. If the --stem flag is set, definition words are stemmed using the Lingua::Stem::En module.
SYSTEM REQUIREMENTS
Perl (version 5.8.5 or better) - http://www.perl.org
UMLS::Interface - http://search.cpan.org/dist/UMLS-Interface
UMLS::Similarity - http://search.cpan.org/dist/UMLS-Similarity
CONTACT US
If you have any trouble installing and using UMLS-Similarity,
please contact us via the users mailing list :
umls-similarity@yahoogroups.com
You can join this group by going to:
http://tech.groups.yahoo.com/group/umls-similarity/
You may also contact us directly if you prefer :
Bridget T. McInnes: bthomson at umn.edu
Ted Pedersen : tpederse at d.umn.eduAUTHOR
Bridget T. McInnes, University of MinnesotaCOPYRIGHT
Copyright (c) 2010,
Bridget T. McInnes, University of Minnesota Twin Cities
bthomson at umn.edu
Ted Pedersen, University of Minnesota Duluth
tpederse at d.umn.edu
Serguei Pakhomov, University of Minnesota Twin Cities
pakh0002 at umn.edu
Ying Liu, University of Minnesota Twin Cities
liux0395 at umn.eduThis program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to:
The Free Software Foundation, Inc.,
59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.