/ 
Wireguard-WGmeta-0.2.3
River stage zero No dependents
/ Wireguard::WGmeta::Wrapper::Config

NAME

WGmeta::Wrapper::Config - Class for interfacing the wireguard configuration

SYNOPSIS

use Wireguard::WGmeta::Wrapper::Config;
my $wg_meta = Wireguard::WGmeta::Wrapper::Config->new('<path to wireguard configuration>');

DESCRIPTION

This class provides wrapper-functions around a wireguard configuration parsed by Wireguard::WGmeta::Parser::Config which allow to edit, add and remove interfaces and peers.

CONCURRENCY

Please refer to Wireguard::WGmeta::Wrapper::ConfigT

EXAMPLES

use Wireguard::WGmeta::Wrapper::Config;
my $wg-meta = Wireguard::WGmeta::Wrapper::Config->new('<path to wireguard configuration>');

# set an attribute (non wg-meta attributes forwarded to the original `wg set` command)
wg_meta->set('wg0', 'WG_0_PEER_A_PUBLIC_KEY', '<attribute_name>', '<attribute_value>');

# set an alias for a peer
wg_meta->set('wg0', 'WG_0_PEER_A_PUBLIC_KEY', 'alias', 'some_fancy_alias');

# disable peer (this comments out the peer in the configuration file
wg_meta->disable_by_alias('wg0', 'some_fancy_alias');

# write config (if parameter is set to True, the config is overwritten, if set to False the resulting file is suffixed with '.not_applied'
wg_meta->commit(1);

METHODS

new($wireguard_home [, $wg_meta_prefix, $wg_meta_disabled_prefix, $custom_attributes])

Creates a new instance of this class.

Parameters

  • $wireguard_home Path to Wireguard configuration files. Make sure the path ends with a `/`.

  • [$wg_meta_prefix] A custom wg-meta comment prefix, has to begin with either `;` or `#`. It is recommended to not change this setting, especially in a already deployed installation.

  • [$wg_meta_disabled_prefix] A custom prefix for the commented out (disabled) sections, has to begin with either `;` or `#` and must not be equal with $wg_meta_prefix! (This is enforced and an exception is thrown if violated) It is recommended to not change this setting, especially in an already deployed installation.

  • [$not_applied_suffix] Suffix to add if commit() is set to not override an existing config.

  • [$custom_attributes] A reference to a hash defining custom attributes. Expects the following structure:

    {
    'attr_key'     => {
        'in_config_name' => 'In config name',
        'validator'      => 'Ref to validation function'
    },
    'example'         => {
        'in_config_name' => 'DNS',
        'validator'      => \&accept_any
    },
    ...
}

Returns

An instance of WGmeta::Wrapper::Config

set($interface, $identifier, $attribute, $value [, $allow_non_meta, $forward_function])

Sets a value on a specific interface section. If attribute_value == $value this sub is essentially a No-Op.

Parameters

  • $interface Valid interface identifier (e.g 'wg0')

  • $identifier If the target section is a peer, this is usually the public key of this peer. If target is an interface, its again the interface name.

  • $attribute Attribute name (Case does not not matter)

  • [$allow_non_meta = FALSE] If set to TRUE, non wg-meta attributes are not forwarded to $forward_function.

  • [$forward_function = undef] A reference to a callback function when $allow_non_meta = TRUE. The following signature is expected: forward_fun($interface, $identifier, $attribute, $value)

Raises

Exception if either the interface or identifier is invalid.

Returns

None

attr_value_is_valid($attribute, $value, $ref_valid_attrs)

Simply calls the validate() function defined in Wireguard::WGmeta::Validator

Parameters

Returns

True if validation was successful, False if not

set_by_alias($interface, $alias, $attribute, $value [, $allow_non_meta = FALSE, $forward_function = undef])

Same as "set($interface, $identifier, $attribute, $value [, $allow_non_meta, $forward_function])" - just with alias support.

Raises

Exception if alias is invalid

disable($interface, $identifier)

Disables an interface/peer (by prefixing $wg_meta_disabled_prefix) and setting the wg-meta attribute `Disabled` to 1.

Parameters

  • $interface Valid interface name (e.g 'wg0').

  • $identifier A valid identifier: If the target section is a peer, this is usually the public key of this peer. If target is an interface, its again the interface name.

Returns

None

enable($interface, $identifier)

Inverse method if "disable($interface, $identifier)"

disable_by_alias($interface, $alias)

Same as "disable($interface, $identifier)" just with alias support

Raises

Exception if alias is invalid

disable_by_alias($interface, $alias)

Same as "enable($interface, $identifier)"ust with alias support

Raises

Exception if alias is invalid

is_valid_interface($interface)

Checks if an interface name is valid (present in parsed config)

Parameters

  • $interface An interface name

Returns

True if present, undef if not.

is_valid_alias($interface, $alias)

Simply checks if an alias is valid for spec

is_valid_identifier($interface, $identifier)

Checks if an identifier is valid for a given interface

Parameters

  • $interface An interface name

  • $identifier An identifier (no alias!)

Returns

True if present, undef if not.

translate_alias($interface, $alias)

Translates an alias to a valid identifier.

Parameters

  • $interface A valid interface name (e.g 'wg0').

  • $alias An alias to translate

Raises

Exception if alias is invalid

Returns

A valid identifier.

try_translate_alias($interface, $may_alias)

Tries to translate an identifier (which may be an alias). However, unlike "translate_alias($interface, $alias)", no exception is thrown on failure, instead the $may_alias is returned.

Parameters

  • $interface A valid interface name (is not validated)

  • $may_alias An identifier which could be a valid alias for this interface

Returns

If the alias is valid for the specified interface, the corresponding identifier is returned, else $may_alias

get_all_conf_files($wireguard_home)

Returns a list of all files in $wireguard_home matching r/.*\.conf$/.

Parameters

  • $wireguard_home Path to a folder where wireguard configuration files are located

Returns

A reference to a list with absolute paths to the config files (possibly empty)

commit([$is_hot_config = FALSE, $plain = FALSE])

Writes down the parsed config to the wireguard configuration folder

Parameters

  • [$is_hot_config = FALSE]) If set to TRUE, the existing configuration is overwritten (and possibly existing, not applied configs are deleted). Otherwise, the suffix '.not_applied' is appended to the filename

  • [$plain = FALSE]) If set to TRUE, no header is generated

Raises

Exception if: Folder or file is not writeable

Returns

None

get_interface_list()

Return a list of all interfaces.

Returns

A list of all valid interface names. If no interfaces are available, an empty list is returned

get_interface_section($interface, $identifier)

Returns a hash representing a section of a given interface

Parameters

  • $interface Valid interface name

  • $identifier Valid section identifier

Returns

A hash containing the requested section. If the requested section/interface is not present, an empty hash is returned.

get_section_list($interface)

Returns a list of valid sections of an interface (ordered as in the original config file).

Parameters

  • $interface A valid interface name

Returns

A list of all sections of an interface. If interface is not present, an empty list is returned.

get_interface_fqdn($interface)

Returns the FQDN for an interface (if available)

Parameters

  • $interface A valid interface name

Returns

Value of fqdn attribute or empty string if unavailable.

add_interface($interface_name, $ip_address, $listen_port, $private_key)

Adds a (minimally configured) interface. If more attributes are needed, please set them using the set() method.

Caveat: No validation is performed on the values!

Parameters

  • $interface_name A new interface name, must be unique.

  • $ip_address A string describing the ip net(s) (e.g '10.0.0.0/24, fdc9:281f:04d7:9ee9::2/64')

  • $listen_port The listen port for this interface.

  • $private_key A private key for this interface

Raises

An exception if the interface name already exists.

Returns

None

add_peer($interface, $name, $ip_address, $public_key [, $alias, $preshared_key])

Adds a peer to an exiting interface.

Parameters

  • $interface A valid interface.

  • $name A name for this peer (wg-meta).

  • $ip_address A string describing the ip-address(es) of this this peer.

  • $public_key Public-key for this interface. This becomes the identifier of this peer.

  • [$preshared_key] Optional argument defining the psk.

  • [$alias] Optional argument defining an alias for this peer (wg-meta)

Raises

An exception if either the interface is invalid, the alias is already assigned or the public-key is already present on an other peer.

Returns

A tuple consisting of the iface private-key and listen port

remove_peer($interface, $identifier)

Removes a peer (identified by it's public key or alias) from an interface.

Parameters

  • $interface A valid interface name

  • $identifier A valid identifier (or an alias)

Raises

Exception if interface or identifier is invalid

Returns

None

remove_interface($interface [, $keep_file = FALSE])

Removes an interface. This command deletes the config file immediately. I.e no rollback possible!

Parameters

  • $interface A valid interface name

Raises

Exception if interface or identifier is invalid

Returns

None

get_peer_count([$interface = undef])

Returns the number of peers.

Caveat: Does return the count represented in the current (parsed) configuration state.

Parameters

  • [$interface = undef] If defined, only return counts for this specific interface

Returns

Number of peers

may_reload_from_disk($interface [, $new = FALSE])

Method to reload an interface configuration from disk. Also useful to add an newly (externally) created interface on-the-fly. If a config file with a .not_applied suffix is found (and its mtime is newer than the original one), it is taken as source for reloading the configuration data.

Parameters

  • $interface A valid interface name

  • [$new = FALSE] If set to True, the parser looks at $wireguard_home for this new interface config.

  • [$force = FALSE] When set to True, the configuration is reloaded regardless of its mtime.

Raises

Exception: If the interface is invalid (or the config file is not found)

Returns

None, or undef if $new == True and the interface is in fact not a wg config.

register_on_reload_listener($ref_handler, $handler_id [, $ref_listener_args = []])

Register your callback handlers for the reload_from_disk() event here. Your handler is called after the reload happened, is blocking and exceptions are caught in an eval{}; environment.

Parameters

  • $ref_handler Reference to a handler function. The following signature is expected:

    sub my_handler_function($interface, $ref_list_args){
    ...
}

  • $handler_id An identifier for you handler function. Must be unique!

  • [$ref_listener_args = []] A reference to an argument list for your handler function

Returns

None, exception if $handler_id is already present.

remove_on_reload_listener($handler_id)

Removes a reload callback handler by it's $handler_id.

Parameters

  • $handler_id A valid handler id

Returns

1 on success, undef on failure.