/ 
Log-Agent-0.1.5
River stage one • 7 direct dependents • 7 total dependents
/ Log::Agent

NAME

Log::Agent - logging agent

SYNOPSIS

use Log::Agent;            # in all reusable components
logerr "error";
logtrc "notice:12", "notice that" if ...;
logdie "log and die";

use Log::Agent;            # in application's main
logconfig(-prefix => $0);  # simplest, uses default driver

use Log::Agent;                    # another more complex example
require Log::Agent::Driver::File;  # logging made to file
logconfig(-driver =>
    Log::Agent::Driver::File->make(
        -prefix      => $0,
        -showpid     => 1,
        -channels    => {
            'error'  => "$0.err",
            'output' => "$0.out",
            'debug'  => "$0.dbg",
        },
    )
);

DESCRIPTION

The Log::Agent module provides an abstract layer for logging and tracing, which is independant from the actual method used to physically perform those activities. It acts as an agent (hence the name) that collects the requests and delegates processing to a sublayer: the logging driver.

The Log::Agent module is meant to be used in all reusable components, since they cannot know in advance how the application which ends up using them will perform its logging activities: either by emitting messages on stdout and errors on stderr, or by directing messages to logfiles, or by using syslog(3).

The logging interface is common for all the logging drivers, and is therefore the result of a compromise between many logging schemes: any information given at this level must be either handled by all drivers, or may be ignored depending on the application's final choice.

WARNING: THIS INTERFACE IS STILL VERY ALPHA AND IS SUBJECT TO CHANGE DEPENDING ON THE FEEDBACK I SHALL GET FROM USERS AND FROM MY OWN EXPERIENCE USING IT, WITHOUT ANY BACKWARD COMPATIBILITY ASSURANCE.

PRIORITIES AND LEVEL

The Log::Agent module can use both priorities (as defined by syslog(3)) or logging levels, or either, in which case there is an implicit computation of the missing item. Here are the known priorities (which may be abbreviated to the first 2 letters, in a case-insensitive manner) and their corresponding logging level:

emergency   0
alert       0
critical    1
error       2
warning     4
notice      6
info        8
debug       10

A logging level is defined as being a threshold: any level lesser than or equal to that threshold will be logged.

Anywhere where a priority is expected, one may specify a number taken as a logging level or a string taken as a priority. If the default mapping outlined above is not satisfactory, it can be redefined by specifying, for instance "notice:9". It will be taken as being of level 9, but with a notice priority nonetheless, not info as it would have been implicitely determined otherwise.

At the Log::Agent level, it is possible to define a trace level and a debug level. Only the messages below those levels (inclusive) will be handed out to the underlying driver for logging. They are used by the logtrc() and logdbg() routines, respectively.

CHANNELS

The Log::Agent class defines three logging channels, which are error, output and debug. Depending on the driver used for logging, those channels are ignored (typically with syslog()) or may be implicitely defined (default logging, i.e. the one achieved by the Log::Agent::Driver::Default driver, remaps error to stderr, output and debug to stdout).

INTERFACE

Anywhere a message is expected, it can be a single string, or a printf()-like format string followed by the required arguments. The special macro %m is handled directly by Log::Agent and is replaced by the string version of $!, which is the last error message returned by the last failing system call.

NOTE: There should not be any trailing "\n" in the message strings, nor any embededed one, although this is not enforced. Remember that the main purpose of Log::Agent is to specify logging messages in a standard way! Therefore, most of the time, a "should" should be read as "must" and "should not" as "must not", which is the strongest interdiction form available in English, as far as I know.

Here are valid message examples:

"started since $time"
"started since %s", $time
"fork: %m"

The follwing logging interface is made available to modules:

logdbg priority, message

Debug logging of message to the debug channel. You may specify any priority you want, i.e. a debug priority is not enforced here. You may even specify "notice:4" if you wish, to have the message logged if the debug level is set to 4 or less. If handed over to syslog(3), the message will nonetheless be logged at the notice priority.

logtrc priority, message

Trace logging of message to the output channel. Like logdbg() above, you are not restricted to the info priority. This routine checks the logging level (either explicit as in "info:14" or implicit as in "notice") against the trace level.

logsay message

Unconditionally log the message at the notice priority to the output channel. The logging always takes place, but only if the routine is called. This means you can still say:

logsay "some trace message" if $verbose;

and control whether the message is emitted by using some external configuration for your module (e.g. by adding a -verbose flag to the creation routine of your class).

logwarn message

Log a warning message at the warning priority to the error channel.

logerr message

Log an error message at the error priority to the error channel.

logdie message

Log a fatal message at the critical priority to the error channel, and then dies.

logconfess message

Same as logdie(), but issues a Carp::confess(3) call instead. It is possible to configure the Log::Agent module via the -confess switch to automatically redirect a logdie() to logconfess(), which is invaluable during unit testing.

logcroak message

Same as logdie(), but issues a Carp::croak(3) call instead. It is possible to configure the Log::Agent module via the -confess switch to automatically redirect a logcroak() to logconfess(), which is invaluable during unit testing.

Log::Agent::inited

Returns true when Log::Agent was initialized, either explicitely via a logconfig() or implicitely via any logxxx() call.

For applications that may wish to implement a debug layer on top of Log::Agent, the following routine is provided. Note that it is not imported by default, i.e. it needs to be explicitely mentionned at use time, since it is not meant to be used directly under regular usage.

logwrite channel, priority, message

Unconditionally write the message at the given priority on channel. The channel can be one of debug, error or output.

At the application level, one needs to commit once and for all about the logging scheme to be used. This is done thanks to the logconfig() routine which takes the following switches, in alphabetical order:

-caller => [ parameters ]

Request that caller information (relative to the logxxx() call) be part of the log message. The given parameters are handed off to the creation routine of Log::Agent::Caller(3) and are documented there.

I usually say something like:

-caller => [ -display => '($sub/$line)' ]

which I find informative enough. On occasion, I found myself using more complex sequences.

-confess => flag

When true, all logdie() calls will be automatically masqueraded as logconfess().

-debug => priority or level

Sets the priority threshold (can be expressed as a string or a number, the string being mapped to a logging level as described above in PRIORITIES AND LEVEL) for logdbg() calls.

Calls tagged with a level less than or equal to the given threshold will pass through, others will return prematurely without logging anything.

-driver => driver_object

This switch defines the driver object to be used, which must be an heir of the Log::Agent::Driver class. See Log::Agent::Driver(3) for a list of the available drivers.

-level => priority or level

Specifies both -debug and -trace levels at the same time, to a common value.

-prefix => name

Defines the application name which will be pre-pended to all messages, followed by ": " (a colon and a space). Using this switch alone will configure the default driver to use that prefix.

When a driver object is used, the -prefix switch is kept at the Log::Agent level only and is not passed to the driver: it is up to the driver's creation routine to request the -prefix. Having this information in Log::Agent enables the module to die on critical errors with that error prefix, since it cannot rely on the logging driver for that, obviously.

-trace => priority or level

Same a -debug but for logtrc() calls only.

KNOWN LIMITATIONS

The following limitations exist in this early version. They might be addressed in future versions if they are perceived as annoying limitatons instead of being just documented ones. :-)

  • A module which calls logdie() may have its die trapped if called from within an eval(), but unfortunately, the value of $@ is unpredictable: it may be prefixed or not depending on the driver used. This is harder to fix as one might think of at first glance.

  • Some drivers lack customization and hardwire a few things that come from my personal taste, like the prefixing done when duperr is set in Log::Agent::Driver::File, or the fact that the debug and output channels are merged as one in the Log::Agent::Driver::Default driver.

  • When using logcroak() or logconfess(), the place where the call was made can still be visible when -caller is used, since the addition of the caller information to the message is done before calling the logging driver. Is this a problem?

AUTHOR

Raphael Manfredi <Raphael_Manfredi@pobox.com>

SEE ALSO

Log::Agent::Driver(3), Carp(3).