/ 
parrot-0.6.1
/ Parrot

NAME

Parrot - running

VERSION

$Revision: 25730 $

OVERVIEW

This document describes Parrot's command line options.

SYNOPSIS

parrot [-options] <file> [arguments ...]

ENVIRONMENT

PARROT_RUNTIME

If this environment variable is set, parrot will use this path as its runtime prefix instead of the compiled in path.

PARROT_GC_DEBUG

Turn on the --gc-debug flag.

OPTIONS

Assembler options

-a, --pasm

Assume PASM input on stdin.

-c, --pbc

Assume PBC file on stdin, run it.

-d, --imcc-debug [hexbits]

The -d switch takes an optional argument which is considered to hold a hex value of debug bits. Without a value, debug is set to 1.

The individual bits can be listed on the command line by use of the --help-debug switch.

To produce really huge output on stderr run "parrot -d 0ffff ...". Note: If the argument is separated by whitespace from the -d switch, it has to start with a number.

-h, --help

Print command line option summary.

--help-debug

Print debugging and tracing flag bits summary.

-o outputfile, --output=outputfile

Act like an assembler. Don't run code, unless -r is given too. If the outputfile ends with .pbc, a PBC file is written. If it ends with .pasm, a PASM output is generated, even from PASM input. This can be handy to check various optimizations, including -Op.

--output-pbc

Act like an assembler, but always output bytecode, even if the output file does not end in .pbc

-r, --run-pbc

Only useful after -o or --output-pbc. Run the program from the compiled in-memory image. If two -r options are given, the .pbc file is read from disc and run. This is mainly needed for tests.

-v, --verbose

One -v shows which files are worked on and prints a summary over register usage and optimization stats per compilation unit. With two -v switches, parrot prints a line per individual processing step too.

-y, --yydebug

Turn on yydebug in yacc/bison.

-V, --version

Print version information and exit.

-Ox

Optimize

-O0 no optimization (default)
-O1 optimizations without life info (e.g. branches)
-O  same
-O2 optimizations with life info
-Op rewrite I and N PASM registers most used first
-Ot select fastest runcore (default with -O1 and -O2)
-Oc turns on the optional/experimental tail call optimizations

See docs/dev/optimizer.pod for more information on the optimizer. Note that optimization is currently experimental and these options are likely to change.

-E, --pre-process-only

Preprocess source file (expand macros) and print result to stdout:

$ parrot -E t/op/macro_10.pasm
$ parrot -E t/op/macro_10.pasm | parrot -- -

Runcore Options

These options select the runcore, which is useful for performance tuning and debugging. See "About runcores" for details.

-R, --runcore CORE

Select the runcore. The following cores are available:

slow, bounds  bounds checking core (default)
fast          fast core (no bounds checking, profiling, or tracing)
switch        switch core
cgp           computed goto-predereferenced core
cgoto         computed goto core
jit           JIT core
cgp-jit       computed goto-predereferenced core with JIT
switch-jit    switch core with JIT
exec          exec core (uses JIT at compile time to generate native code)
trace         bounds checking core w/ trace info (see 'parrot --help-debug')
gcdebug       performs a full GC run before every op dispatch (good for
              debugging GC problems)
-b, --bounds-checks, --slow-core

Select the bounds-checking slow core (default).

-C, --CGP-core

Select the CGP (CGoto Predereferenced) core (if available).

-f, --fast-core

Select the fast (or function) core.

-g, --computed-goto-core

Select the CGoto core (if available).

-j, --jit-core

Run with the JIT subsystem (if available).

-p, --profile

Run with the slow core and print an execution profile.

-S, --switched-core

TODO: This needs to be documented briefly here and also in glossary.pod.

-t, --trace

Run with the slow core and print trace information to stderr. See parrot --help-debug for available flag bits.

VM Options

-w, --warnings

Turn on warnings. See parrot --help-debug for available flag bits.

-D, --parrot-debug

Turn on interpreter debug flag. See parrot --help-debug for available flag bits.

--gc-debug

Turn on GC (Garbage Collection) debugging. This imposes some stress on the GC subsystem and can slow down execution considerably.

-G, --no-gc

This turns off DOD (Dead Object Detection) and GC. This may be useful to find GC related bugs. Don't use this option for longer running programs: as memory is no longer recycled, it may quickly become exhausted.

--leak-test, --destroy-at-end

Free all memory of the last interpreter. This is useful when running leak checkers.

-., --wait

Read a keystroke before starting. This is useful when you want to attach a debugger on platforms such as Windows.

--runtime-prefix

Print the runtime prefix path and exit.

<file>

If the file ends in .pbc it will be interpreted immediately.

If the file ends in .pasm, then it is parsed as PASM code. Otherwise, it is parsed as PIR code. In both cases, it will then be run, unless the -o flag was given.

If the file is a single dash, input from stdin is read.

[arguments ...]

Optional arguments passed to the running program as ARGV. The program is assumed to know what to do with these.

Generated files

If JIT debugging is enabled (e.g. via --parrot-debug 04), the following additional output files are generated:

F<file.stabs.s>     stabsfile for the program
F<file.o>           object file with debug information
F<EVAL_n>           source of C<compile> op number I<n>
F<EVAL_n.stabs.s>   stabsfile for this block
F<EVAL_n.o>         object file with debug information

See docs/jit.pod for further information.

About runcores

The runcore (or runloop) tells Parrot how to find the C code that implements each instruction. Parrot provides more than one way to do this, partly because no single runcore will perform optimally on all architectures (or even for all problems on a given architecture), and partly because some of the runcores have specific debugging and tracing capabilities.

In the default "slow" runcore, each opcode is a separate C function. That's pretty easy in pseudocode:

slow_runcore( op ):
    while ( op ):
        op = op_function( op )
        check_for_events()

The GC debugging runcore is similar:

gcdebug_runcore( op ):
    while ( op ):
        perform_full_gc_run()
        op = op_function( op )
        check_for_events()

Of course, this is much slower, but is extremely helpful for pinning memory corruption problems that affect GC down to single-instruction resolution. See http://www.oreillynet.com/onlamp/blog/2007/10/debugging_gc_problems_in_parro.html for more information.

The trace and profile cores are also based on the "slow" core, doing full bounds checking, and also printing runtime information to stderr.

The switched core eschews these tiny op functions in favor of cases in a large switch statement:

switch_runcore( op ):
    while ( op ):
        switch *op:
            case NOP:
                ...
            case STORE:
                ...
            ...

Depending on the C compiler implementation, this may be faster than function calling. On older systems, it may fail to compile altogether.

The computed-goto ("cgoto") runcore avoids the overhead of function calls by jumping directly to the address where each opcode's function starts. The computed-goto-prederef ("CGP") core takes this one step further by replacing opcode numbers in the bytecode with those opfunc addresses. See "Predereferencing" in docs/glossary.pod for a fuller explanation.

Finally, the JIT runcore uses the "slow" core, but also creates and jumps to JIT-compiled native code for supported opcodes. "cgp-jit" and "switched-jit" are variations that use the CGP or switched core but run JIT code when possible.

Operation table

Command Line          Action         Output
---------------------------------------------
parrot x.pir          run
parrot x.pasm         run
parrot x.pbc          run
-o x.pasm x.pir       ass            x.pasm
-o x.pasm y.pasm      ass            x.pasm
-o x.pbc  x.pir       ass            x.pbc
-o x.pbc  x.pasm      ass            x.pbc
-o x.pbc -r x.pasm    ass/run pasm   x.pbc
-o x.pbc -r -r x.pasm ass/run pbc    x.pbc
-o x.o    x.pbc       obj

... where the possible actions are:

run ... yes, run the program
ass ... assemble sourcefile
obj ..  produce native (ELF) object file for the EXEC subsystem

BUGS

Yes.

FILES

main.c

AUTHOR

Leopold Toetsch lt@toetsch.at