NAME

Chart::Plotly::Trace::Ohlc - The ohlc (short for Open-High-Low-Close) is a style of financial chart describing open, high, low and close for a given `x` coordinate (most likely time). The tip of the lines represent the `low` and `high` values and the horizontal segments represent the `open` and `close` values. Sample points where the close value is higher (lower) then the open value are called increasing (decreasing). By default, increasing items are drawn in green whereas decreasing are drawn in red.

VERSION

version 0.038

SYNOPSIS

use Chart::Plotly;
use Chart::Plotly::Trace::Ohlc;
my $ohlc = Chart::Plotly::Trace::Ohlc->new(
    x     => [ 1 .. 5 ],
    open  => [ 1, 6, 7 ],
    close => [ 7, 12, 5 ],
    high  => [ 8, 15, 10 ],
    low   => [ 0.5, 5, 4 ]
);

Chart::Plotly::show_plot([ $ohlc ]);

DESCRIPTION

The ohlc (short for Open-High-Low-Close) is a style of financial chart describing open, high, low and close for a given `x` coordinate (most likely time). The tip of the lines represent the `low` and `high` values and the horizontal segments represent the `open` and `close` values. Sample points where the close value is higher (lower) then the open value are called increasing (decreasing). By default, increasing items are drawn in green whereas decreasing are drawn in red.

Screenshot of the above example:

Screenshot of the above example

This file has been autogenerated from the official plotly.js source.

If you like Plotly, please support them: https://plot.ly/ Open source announcement: https://plot.ly/javascript/open-source-announcement/

Full reference: https://plot.ly/javascript/reference/#ohlc

DISCLAIMER

This is an unofficial Plotly Perl module. Currently I'm not affiliated in any way with Plotly. But I think plotly.js is a great library and I want to use it with perl.

METHODS

TO_JSON

Serialize the trace to JSON. This method should be called only by JSON serializer.

type

Trace type.

ATTRIBUTES

  • close

    Sets the close values.

  • closesrc

    Sets the source reference on plot.ly for close .

  • customdata

    Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, *scatter* traces also appends customdata items in the markers DOM elements

  • customdatasrc

    Sets the source reference on plot.ly for customdata .

  • decreasing

  • high

    Sets the high values.

  • highsrc

    Sets the source reference on plot.ly for high .

  • hoverinfo

    Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

  • hoverinfosrc

    Sets the source reference on plot.ly for hoverinfo .

  • hoverlabel

  • hovertext

    Same as `text`.

  • hovertextsrc

    Sets the source reference on plot.ly for hovertext .

  • ids

    Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

  • idssrc

    Sets the source reference on plot.ly for ids .

  • increasing

  • legendgroup

    Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

  • line

  • low

    Sets the low values.

  • lowsrc

    Sets the source reference on plot.ly for low .

  • pmeta

    Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

  • metasrc

    Sets the source reference on plot.ly for meta .

  • name

    Sets the trace name. The trace name appear as the legend item and on hover.

  • opacity

    Sets the opacity of the trace.

  • open

    Sets the open values.

  • opensrc

    Sets the source reference on plot.ly for open .

  • selectedpoints

    Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

  • showlegend

    Determines whether or not an item corresponding to this trace is shown in the legend.

  • stream

  • text

    Sets hover text elements associated with each sample point. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to this trace's sample points.

  • textsrc

    Sets the source reference on plot.ly for text .

  • tickwidth

    Sets the width of the open/close tick marks relative to the *x* minimal interval.

  • transforms

  • uid

    Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.

  • uirevision

    Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

  • visible

    Determines whether or not this trace is visible. If *legendonly*, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

  • x

    Sets the x coordinates. If absent, linear coordinate will be generated.

  • xaxis

    Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If *x* (the default value), the x coordinates refer to `layout.xaxis`. If *x2*, the x coordinates refer to `layout.xaxis2`, and so on.

  • xcalendar

    Sets the calendar system to use with `x` date data.

  • xsrc

    Sets the source reference on plot.ly for x .

  • yaxis

    Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If *y* (the default value), the y coordinates refer to `layout.yaxis`. If *y2*, the y coordinates refer to `layout.yaxis2`, and so on.

AUTHOR

Pablo Rodríguez González <pablo.rodriguez.gonzalez@gmail.com>

COPYRIGHT AND LICENSE

This software is Copyright (c) 2020 by Pablo Rodríguez González.

This is free software, licensed under:

The MIT (X11) License