/ 
Chart-Plotly-0.032
River stage one • 2 direct dependents • 2 total dependents
/ Chart::Plotly::Trace::Parcats::Line

NAME

Chart::Plotly::Trace::Parcats::Line - This attribute is one of the possible options for the trace parcats.

VERSION

version 0.032

SYNOPSIS

use Chart::Plotly;
use Chart::Plotly::Trace::Parcats;
use Chart::Plotly::Plot;

# Example from https://github.com/plotly/plotly.js/blob/7b751009fc9804272316f0bb539ed0386c0858bd/test/image/mocks/parcats_bundled.json

my $trace = Chart::Plotly::Trace::Parcats->new( bundlecolors => 1,
                                                dimensions   => [
                                                           { label  => 'One',
                                                             values => [ (1) x 2, 2, 1, 2, (1) x 2, 2, 1 ]
                                                           },
                                                           { label  => 'Two',
                                                             values => [ 'A', 'B', 'A', 'B', ('C') x 2, 'A', 'B', 'C' ]
                                                           },
                                                           { label  => 'Three',
                                                             values => [ (11) x 9 ]
                                                           }
                                                ],
                                                domain => { x => [ 0.125, 0.625 ],
                                                            y => [ 0.25,  0.75 ]
                                                },
                                                line => { color => [ (0) x 2, (1) x 2, 0, 1, (0) x 3 ] }
);

my $plot = Chart::Plotly::Plot->new( traces => [$trace],
                                     layout => { height => 602,
                                                 margin => { b => 40,
                                                             l => 40,
                                                             r => 40,
                                                             t => 50
                                                 },
                                                 width => 592
                                     }
);

Chart::Plotly::show_plot($plot);

DESCRIPTION

This attribute is part of the possible options for the trace parcats.

This file has been autogenerated from the official plotly.js source.

If you like Plotly, please support them: https://plot.ly/ Open source announcement: https://plot.ly/javascript/open-source-announcement/

Full reference: https://plot.ly/javascript/reference/#parcats

DISCLAIMER

This is an unofficial Plotly Perl module. Currently I'm not affiliated in any way with Plotly. But I think plotly.js is a great library and I want to use it with perl.

METHODS

TO_JSON

Serialize the trace to JSON. This method should be called only by JSON serializer.

ATTRIBUTES

  • autocolorscale

    Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `line.colorscale`. Has an effect only if in `line.color`is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

  • cauto

    Determines whether or not the color domain is computed with respect to the input data (here in `line.color`) or the bounds set in `line.cmin` and `line.cmax` Has an effect only if in `line.color`is set to a numerical array. Defaults to `false` when `line.cmin` and `line.cmax` are set by the user.

  • cmax

    Sets the upper bound of the color domain. Has an effect only if in `line.color`is set to a numerical array. Value should have the same units as in `line.color` and if set, `line.cmin` must be set as well.

  • cmid

    Sets the mid-point of the color domain by scaling `line.cmin` and/or `line.cmax` to be equidistant to this point. Has an effect only if in `line.color`is set to a numerical array. Value should have the same units as in `line.color`. Has no effect when `line.cauto` is `false`.

  • cmin

    Sets the lower bound of the color domain. Has an effect only if in `line.color`is set to a numerical array. Value should have the same units as in `line.color` and if set, `line.cmax` must be set as well.

  • color

    Sets thelinecolor. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `line.cmin` and `line.cmax` if set.

  • coloraxis

    Sets a reference to a shared color axis. References to these shared color axes are *coloraxis*, *coloraxis2*, *coloraxis3*, etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.

  • colorbar

  • colorscale

    Sets the colorscale. Has an effect only if in `line.color`is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use`line.cmin` and `line.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Greys,YlGnBu,Greens,YlOrRd,Bluered,RdBu,Reds,Blues,Picnic,Rainbow,Portland,Jet,Hot,Blackbody,Earth,Electric,Viridis,Cividis.

  • colorsrc

    Sets the source reference on plot.ly for color .

  • hovertemplate

    Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-3.x-api-reference/blob/master/Formatting.md#d3_format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-3.x-api-reference/blob/master/Time-Formatting.md#format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plot.ly/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variables `count` and `probability`. Anything contained in tag `<extra>` is displayed in the secondary box, for example "<extra>{fullData.name}</extra>". To hide the secondary box completely, use an empty tag `<extra></extra>`.

  • reversescale

    Reverses the color mapping if true. Has an effect only if in `line.color`is set to a numerical array. If true, `line.cmin` will correspond to the last color in the array and `line.cmax` will correspond to the first color.

  • shape

    Sets the shape of the paths. If `linear`, paths are composed of straight lines. If `hspline`, paths are composed of horizontal curved splines

  • showscale

    Determines whether or not a colorbar is displayed for this trace. Has an effect only if in `line.color`is set to a numerical array.

AUTHOR

Pablo Rodríguez González <pablo.rodriguez.gonzalez@gmail.com>

COPYRIGHT AND LICENSE

This software is Copyright (c) 2019 by Pablo Rodríguez González.

This is free software, licensed under:

The MIT (X11) License