NAME

Chart::Plotly::Trace::Waterfall - Draws waterfall trace which is useful graph to displays the contribution of various elements (either positive or negative) in a bar chart. The data visualized by the span of the bars is set in `y` if `orientation` is set th *v* (the default) and the labels are set in `x`. By setting `orientation` to *h*, the roles are interchanged.

VERSION

version 0.025

SYNOPSIS

use Chart::Plotly;
use Chart::Plotly::Trace::Waterfall;
use Chart::Plotly::Trace::Scatter;
use Chart::Plotly::Plot;

# Example from  https://github.com/plotly/plotly.js/blob/8f8956432ed18368fb6d3f70107b94bbfb39a528/test/image/mocks/waterfall_line.json

my $trace1 = Chart::Plotly::Trace::Scatter->new(
      "x"=>[
        0,
        1,
        2,
        3,
        4,
        5
      ],
      "y"=>[
        1.5,
        1,
        1.3,
        0.7,
        0.8,
        0.9
      ],
    );


my $trace2 = Chart::Plotly::Trace::Waterfall->new(
      "x"=>[
        0,
        1,
        2,
        3,
        4,
        5
      ],
      "y"=>[
        1,
        0.5,
        0.7,
        -1.2,
        0.3,
        0.4
      ],
  );

my $plot = Chart::Plotly::Plot->new(
    traces => [ $trace1, $trace2 ]
);

Chart::Plotly::show_plot($plot);

DESCRIPTION

Draws waterfall trace which is useful graph to displays the contribution of various elements (either positive or negative) in a bar chart. The data visualized by the span of the bars is set in `y` if `orientation` is set th *v* (the default) and the labels are set in `x`. By setting `orientation` to *h*, the roles are interchanged.

Screenshot of the above example:

This file has been autogenerated from the official plotly.js source.

If you like Plotly, please support them: https://plot.ly/ Open source announcement: https://plot.ly/javascript/open-source-announcement/

Full reference: https://plot.ly/javascript/reference/#waterfall

DISCLAIMER

This is an unofficial Plotly Perl module. Currently I'm not affiliated in any way with Plotly. But I think plotly.js is a great library and I want to use it with perl.

METHODS

TO_JSON

Serialize the trace to JSON. This method should be called only by JSON serializer.

type

Trace type.

ATTRIBUTES

• alignmentgroup

  Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up.

• base

  Sets where the bar base is drawn (in position axis units).

• cliponaxis

  Determines whether the text nodes are clipped about the subplot axes. To show the text nodes above axis lines and tick labels, make sure to set `xaxis.layer` and `yaxis.layer` to *below traces*.

• connector

• constraintext

  Constrain the size of text inside or outside a bar to be no larger than the bar itself.

• customdata

  Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, *scatter* traces also appends customdata items in the markers DOM elements

• customdatasrc

  Sets the source reference on plot.ly for customdata .

• decreasing

• dx

  Sets the x coordinate step. See `x0` for more info.

• dy

  Sets the y coordinate step. See `y0` for more info.

• hoverinfo

  Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

• hoverinfosrc

  Sets the source reference on plot.ly for hoverinfo .

• hoverlabel

• hovertemplate

  Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". See https://github.com/d3/d3-format/blob/master/README.md#locale_format for details on the formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plot.ly/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Anything contained in tag `<extra>` is displayed in the secondary box, for example "<extra>{fullData.name}</extra>". To hide the secondary box completely, use an empty tag `<extra></extra>`.

• hovertemplatesrc

  Sets the source reference on plot.ly for hovertemplate .

• hovertext

  Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a *text* flag.

• hovertextsrc

  Sets the source reference on plot.ly for hovertext .

• ids

  Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

• idssrc

  Sets the source reference on plot.ly for ids .

• increasing

• insidetextfont

• legendgroup

  Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

• measure

  An array containing types of values. By default the values are considered as 'relative'. However; it is possible to use 'total' to compute the sums. Also 'absolute' could be applied to reset the computed total or to declare an initial value where needed.

• measuresrc

  Sets the source reference on plot.ly for measure .

• name

  Sets the trace name. The trace name appear as the legend item and on hover.

• offset

  Shifts the position where the bar is drawn (in position axis units). In *group* barmode, traces that set *offset* will be excluded and drawn in *overlay* mode instead.

• offsetgroup

  Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up.

• offsetsrc

  Sets the source reference on plot.ly for offset .

• opacity

  Sets the opacity of the trace.

• orientation

  Sets the orientation of the bars. With *v* (*h*), the value of the each bar spans along the vertical (horizontal).

• outsidetextfont

• selectedpoints

  Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

• showlegend

  Determines whether or not an item corresponding to this trace is shown in the legend.

• stream

• text

  Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a *text* flag and *hovertext* is not set, these elements will be seen in the hover labels.

• textfont

• textposition

  Specifies the location of the `text`. *inside* positions `text` inside, next to the bar end (rotated and scaled if needed). *outside* positions `text` outside, next to the bar end (scaled if needed), unless there is another bar stacked on this one, then the text gets pushed inside. *auto* tries to position `text` inside the bar, but if the bar is too small and no bar is stacked on this one the text is moved outside.

• textpositionsrc

  Sets the source reference on plot.ly for textposition .

• textsrc

  Sets the source reference on plot.ly for text .

• totals

• transforms

• uid

  Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.

• uirevision

  Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

• visible

  Determines whether or not this trace is visible. If *legendonly*, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

• width

  Sets the bar width (in position axis units).

• widthsrc

  Sets the source reference on plot.ly for width .

• x

  Sets the x coordinates.

• x0

  Alternate to `x`. Builds a linear space of x coordinates. Use with `dx` where `x0` is the starting coordinate and `dx` the step.

• xaxis

  Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If *x* (the default value), the x coordinates refer to `layout.xaxis`. If *x2*, the x coordinates refer to `layout.xaxis2`, and so on.

• xsrc

  Sets the source reference on plot.ly for x .

• y

  Sets the y coordinates.

• y0

  Alternate to `y`. Builds a linear space of y coordinates. Use with `dy` where `y0` is the starting coordinate and `dy` the step.

• yaxis

  Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If *y* (the default value), the y coordinates refer to `layout.yaxis`. If *y2*, the y coordinates refer to `layout.yaxis2`, and so on.

• ysrc

  Sets the source reference on plot.ly for y .

AUTHOR

Pablo Rodríguez González <pablo.rodriguez.gonzalez@gmail.com>

COPYRIGHT AND LICENSE

This software is Copyright (c) 2019 by Pablo Rodríguez González.

This is free software, licensed under:

The MIT (X11) License