NAME

Chart::Plotly::Trace::Heatmap - The data that describes the heatmap value-to-color mapping is set in `z`. Data in `z` can either be a {2D array} of values (ragged or not) or a 1D array of values. In the case where `z` is a {2D array}, say that `z` has N rows and M columns. Then, by default, the resulting heatmap will have N partitions along the y axis and M partitions along the x axis. In other words, the i-th row/ j-th column cell in `z` is mapped to the i-th partition of the y axis (starting from the bottom of the plot) and the j-th partition of the x-axis (starting from the left of the plot). This behavior can be flipped by using `transpose`. Moreover, `x` (`y`) can be provided with M or M+1 (N or N+1) elements. If M (N), then the coordinates correspond to the center of the heatmap cells and the cells have equal width. If M+1 (N+1), then the coordinates correspond to the edges of the heatmap cells. In the case where `z` is a 1D {array}, the x and y coordinates must be provided in `x` and `y` respectively to form data triplets.

VERSION

version 0.023

SYNOPSIS

use Chart::Plotly qw(show_plot);
use Chart::Plotly::Trace::Heatmap;
use English qw(-no_match_vars);

my $heatmap = Chart::Plotly::Trace::Heatmap->new(
    x => [ 0 .. 10 ],
    y => [ 0 .. 10 ],
    z => [
        map {
            my $y = $ARG;
            [ map { $ARG * $ARG + $y * $y } ( 0 .. 10 ) ]
        } ( 0 .. 10 )
    ]
);

show_plot( [$heatmap] );

DESCRIPTION

The data that describes the heatmap value-to-color mapping is set in `z`. Data in `z` can either be a {2D array} of values (ragged or not) or a 1D array of values. In the case where `z` is a {2D array}, say that `z` has N rows and M columns. Then, by default, the resulting heatmap will have N partitions along the y axis and M partitions along the x axis. In other words, the i-th row/ j-th column cell in `z` is mapped to the i-th partition of the y axis (starting from the bottom of the plot) and the j-th partition of the x-axis (starting from the left of the plot). This behavior can be flipped by using `transpose`. Moreover, `x` (`y`) can be provided with M or M+1 (N or N+1) elements. If M (N), then the coordinates correspond to the center of the heatmap cells and the cells have equal width. If M+1 (N+1), then the coordinates correspond to the edges of the heatmap cells. In the case where `z` is a 1D {array}, the x and y coordinates must be provided in `x` and `y` respectively to form data triplets.

Screenshot of the above example:

This file has been autogenerated from the official plotly.js source.

If you like Plotly, please support them: https://plot.ly/ Open source announcement: https://plot.ly/javascript/open-source-announcement/

Full reference: https://plot.ly/javascript/reference/#heatmap

DISCLAIMER

This is an unofficial Plotly Perl module. Currently I'm not affiliated in any way with Plotly. But I think plotly.js is a great library and I want to use it with perl.

METHODS

TO_JSON

Serialize the trace to JSON. This method should be called only by JSON serializer.

type

Trace type.

ATTRIBUTES

• autocolorscale

  Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

• colorbar

• colorscale

  Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)', [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use`zmin` and `zmax`. Alternatively, `colorscale` may be a palette name string of the following list: Greys,YlGnBu,Greens,YlOrRd,Bluered,RdBu,Reds,Blues,Picnic,Rainbow,Portland,Jet,Hot,Blackbody,Earth,Electric,Viridis,Cividis.

• connectgaps

  Determines whether or not gaps (i.e. {nan} or missing values) in the `z` data are filled in.

• customdata

  Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, *scatter* traces also appends customdata items in the markers DOM elements

• customdatasrc

  Sets the source reference on plot.ly for customdata .

• dx

  Sets the x coordinate step. See `x0` for more info.

• dy

  Sets the y coordinate step. See `y0` for more info.

• hoverinfo

  Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

• hoverinfosrc

  Sets the source reference on plot.ly for hoverinfo .

• hoverlabel

• ids

  Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

• idssrc

  Sets the source reference on plot.ly for ids .

• legendgroup

  Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

• name

  Sets the trace name. The trace name appear as the legend item and on hover.

• opacity

  Sets the opacity of the trace.

• reversescale

  Reverses the color mapping if true. If true, `zmin` will correspond to the last color in the array and `zmax` will correspond to the first color.

• selectedpoints

  Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

• showlegend

  Determines whether or not an item corresponding to this trace is shown in the legend.

• showscale

  Determines whether or not a colorbar is displayed for this trace.

• stream

• text

  Sets the text elements associated with each z value.

• textsrc

  Sets the source reference on plot.ly for text .

• transpose

  Transposes the z data.

• uid

• uirevision

  Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

• visible

  Determines whether or not this trace is visible. If *legendonly*, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

• x

  Sets the x coordinates.

• x0

  Alternate to `x`. Builds a linear space of x coordinates. Use with `dx` where `x0` is the starting coordinate and `dx` the step.

• xaxis

  Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If *x* (the default value), the x coordinates refer to `layout.xaxis`. If *x2*, the x coordinates refer to `layout.xaxis2`, and so on.

• xcalendar

  Sets the calendar system to use with `x` date data.

• xgap

  Sets the horizontal gap (in pixels) between bricks.

• xsrc

  Sets the source reference on plot.ly for x .

• xtype

  If *array*, the heatmap's x coordinates are given by *x* (the default behavior when `x` is provided). If *scaled*, the heatmap's x coordinates are given by *x0* and *dx* (the default behavior when `x` is not provided).

• y

  Sets the y coordinates.

• y0

  Alternate to `y`. Builds a linear space of y coordinates. Use with `dy` where `y0` is the starting coordinate and `dy` the step.

• yaxis

  Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If *y* (the default value), the y coordinates refer to `layout.yaxis`. If *y2*, the y coordinates refer to `layout.yaxis2`, and so on.

• ycalendar

  Sets the calendar system to use with `y` date data.

• ygap

  Sets the vertical gap (in pixels) between bricks.

• ysrc

  Sets the source reference on plot.ly for y .

• ytype

  If *array*, the heatmap's y coordinates are given by *y* (the default behavior when `y` is provided) If *scaled*, the heatmap's y coordinates are given by *y0* and *dy* (the default behavior when `y` is not provided)

• z

  Sets the z data.

• zauto

  Determines whether or not the color domain is computed with respect to the input data (here in `z`) or the bounds set in `zmin` and `zmax` Defaults to `false` when `zmin` and `zmax` are set by the user.

• zhoverformat

  Sets the hover text formatting rule using d3 formatting mini-languages which are very similar to those in Python. See: https://github.com/d3/d3-format/blob/master/README.md#locale_format

• zmax

  Sets the upper bound of the color domain. Value should have the same units as in `z` and if set, `zmin` must be set as well.

• zmin

  Sets the lower bound of the color domain. Value should have the same units as in `z` and if set, `zmax` must be set as well.

• zsmooth

  Picks a smoothing algorithm use to smooth `z` data.

• zsrc

  Sets the source reference on plot.ly for z .

AUTHOR

Pablo Rodríguez González <pablo.rodriguez.gonzalez@gmail.com>

COPYRIGHT AND LICENSE

This software is Copyright (c) 2018 by Pablo Rodríguez González.

This is free software, licensed under:

The MIT (X11) License