/ 
Chart-Plotly-0.018
River stage one • 2 direct dependents • 2 total dependents
/ Chart::Plotly::Trace::Scattergeo

NAME

Chart::Plotly::Trace::Scattergeo - The data visualized as scatter point or lines on a geographic map is provided either by longitude/latitude pairs in `lon` and `lat` respectively or by geographic location IDs or names in `locations`.

VERSION

version 0.018

SYNOPSIS

use Chart::Plotly;
use Chart::Plotly::Plot;
use Chart::Plotly::Trace::Scattergeo;
use Chart::Plotly::Trace::Scattergeo::Marker;
my $scattergeo = Chart::Plotly::Trace::Scattergeo->new(
    mode => 'markers+text',
    text => [ 'Mount Everest', 'K2',      'Kangchenjunga', 'Lhotse', 'Makalu', 'Cho Oyu',
              'Dhaulagiri I',  'Manaslu', 'Nanga Parbat',  'Annapurna I'
    ],
    lon => [ 86.9252777778, 76.5133333333, 88.1475,       86.9330555556, 87.0888888889, 86.6608333333,
             83.4930555556, 84.5597222222, 74.5891666667, 83.8202777778
    ],
    lat => [ 27.9880555556, 35.8813888889, 27.7033333333, 27.9616666667, 27.8897222222, 28.0941666667,
             28.6966666667, 28.55,         35.2372222222, 28.5955555556
    ],
    name => "Highest mountains
        https://en.wikipedia.org/wiki/List_of_highest_mountains_on_Earth",
    textposition => [ 'top right',
                      'top center',
                      'bottom center',
                      'bottom left',
                      'right',
                      'left',
                      'left',
                      'right',
                      'bottom center',
                      'top center'
    ],
    marker => Chart::Plotly::Trace::Scattergeo::Marker->new(
                                                   size  => 7,
                                                   color => [
                                                       '#bebada', '#fdb462', '#fb8072', '#d9d9d9', '#bc80bd', '#b3de69',
                                                       '#8dd3c7', '#80b1d3', '#fccde5', '#ffffb3'
                                                   ]
    )
);

my $plot = Chart::Plotly::Plot->new( traces => [$scattergeo],
                                     layout => { title => 'Mountains',
                                                 geo   => { scope => 'asia', }
                                     }
);
Chart::Plotly::show_plot($plot);

DESCRIPTION

The data visualized as scatter point or lines on a geographic map is provided either by longitude/latitude pairs in `lon` and `lat` respectively or by geographic location IDs or names in `locations`.

Screenshot of the above example:

Screenshot of the above example

This file has been autogenerated from the official plotly.js source.

If you like Plotly, please support them: https://plot.ly/ Open source announcement: https://plot.ly/javascript/open-source-announcement/

Full reference: https://plot.ly/javascript/reference/#scattergeo

DISCLAIMER

This is an unofficial Plotly Perl module. Currently I'm not affiliated in any way with Plotly. But I think plotly.js is a great library and I want to use it with perl.

METHODS

TO_JSON

Serialize the trace to JSON. This method should be called only by JSON serializer.

type

Trace type.

ATTRIBUTES

  • connectgaps

    Determines whether or not gaps (i.e. {nan} or missing values) in the provided data arrays are connected.

  • customdata

    Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, *scatter* traces also appends customdata items in the markers DOM elements

  • customdatasrc

    Sets the source reference on plot.ly for customdata .

  • fill

    Sets the area to fill with a solid color. Use with `fillcolor` if not *none*. *toself* connects the endpoints of the trace (or each segment of the trace if it has gaps) into a closed shape.

  • fillcolor

    Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available.

  • geo

    Sets a reference between this trace's geospatial coordinates and a geographic map. If *geo* (the default value), the geospatial coordinates refer to `layout.geo`. If *geo2*, the geospatial coordinates refer to `layout.geo2`, and so on.

  • hoverinfo

    Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

  • hoverinfosrc

    Sets the source reference on plot.ly for hoverinfo .

  • hoverlabel

  • hovertext

    Sets hover text elements associated with each (lon,lat) pair or item in `locations`. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (lon,lat) or `locations` coordinates. To be seen, trace `hoverinfo` must contain a *text* flag.

  • hovertextsrc

    Sets the source reference on plot.ly for hovertext .

  • ids

    Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

  • idssrc

    Sets the source reference on plot.ly for ids .

  • lat

    Sets the latitude coordinates (in degrees North).

  • latsrc

    Sets the source reference on plot.ly for lat .

  • legendgroup

    Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

  • line

  • locationmode

    Determines the set of locations used to match entries in `locations` to regions on the map.

  • locations

    Sets the coordinates via location IDs or names. Coordinates correspond to the centroid of each location given. See `locationmode` for more info.

  • locationssrc

    Sets the source reference on plot.ly for locations .

  • lon

    Sets the longitude coordinates (in degrees East).

  • lonsrc

    Sets the source reference on plot.ly for lon .

  • marker

  • mode

    Determines the drawing mode for this scatter trace. If the provided `mode` includes *text* then the `text` elements appear at the coordinates. Otherwise, the `text` elements appear on hover. If there are less than 20 points, then the default is *lines+markers*. Otherwise, *lines*.

  • name

    Sets the trace name. The trace name appear as the legend item and on hover.

  • opacity

    Sets the opacity of the trace.

  • selected

  • selectedpoints

    Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

  • showlegend

    Determines whether or not an item corresponding to this trace is shown in the legend.

  • stream

  • text

    Sets text elements associated with each (lon,lat) pair or item in `locations`. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (lon,lat) or `locations` coordinates. If trace `hoverinfo` contains a *text* flag and *hovertext* is not set, these elements will be seen in the hover labels.

  • textfont

  • textposition

    Sets the positions of the `text` elements with respects to the (x,y) coordinates.

  • textpositionsrc

    Sets the source reference on plot.ly for textposition .

  • textsrc

    Sets the source reference on plot.ly for text .

  • uid

  • unselected

  • visible

    Determines whether or not this trace is visible. If *legendonly*, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

AUTHOR

Pablo Rodríguez González <pablo.rodriguez.gonzalez@gmail.com>

COPYRIGHT AND LICENSE

This software is Copyright (c) 2018 by Pablo Rodríguez González.

This is free software, licensed under:

The MIT (X11) License