NAME
Chart::Plotly::Trace::Bar - The data visualized by the span of the bars is set in `y` if `orientation` is set th *v* (the default) and the labels are set in `x`. By setting `orientation` to *h*, the roles are interchanged.
VERSION
version 0.017
SYNOPSIS
use Chart::Plotly;
use Chart::Plotly::Trace::Bar;
use Chart::Plotly::Plot;
my $x = [ "apples", "bananas", "cherries" ];
my $sample1 = Chart::Plotly::Trace::Bar->new( x => $x,
y => [ map { int( rand() * 10 ) } ( 1 .. ( scalar(@$x) ) ) ],
name => "sample1"
);
my $sample2 = Chart::Plotly::Trace::Bar->new( x => $x,
y => [ map { int( rand() * 10 ) } ( 1 .. ( scalar(@$x) ) ) ],
name => "sample2"
);
my $sample3 = Chart::Plotly::Trace::Bar->new( x => $x,
y => [ map { int( rand() * 10 ) } ( 1 .. ( scalar(@$x) ) ) ],
name => "sample3"
);
my $plot = Chart::Plotly::Plot->new( traces => [ $sample1, $sample2, $sample3 ], layout => { barmode => 'group' } );
Chart::Plotly::show_plot($plot);
DESCRIPTION
The data visualized by the span of the bars is set in `y` if `orientation` is set th *v* (the default) and the labels are set in `x`. By setting `orientation` to *h*, the roles are interchanged.
Screenshot of the above example:
This file has been autogenerated from the official plotly.js source.
If you like Plotly, please support them: https://plot.ly/ Open source announcement: https://plot.ly/javascript/open-source-announcement/
Full reference: https://plot.ly/javascript/reference/#bar
DISCLAIMER
This is an unofficial Plotly Perl module. Currently I'm not affiliated in any way with Plotly. But I think plotly.js is a great library and I want to use it with perl.
METHODS
TO_JSON
Serialize the trace to JSON. This method should be called only by JSON serializer.
type
Trace type.
ATTRIBUTES
base
Sets where the bar base is drawn (in position axis units). In *stack* or *relative* barmode, traces that set *base* will be excluded and drawn in *overlay* mode instead.
basesrc
Sets the source reference on plot.ly for base .
cliponaxis
Determines whether the text nodes are clipped about the subplot axes. To show the text nodes above axis lines and tick labels, make sure to set `xaxis.layer` and `yaxis.layer` to *below traces*.
constraintext
Constrain the size of text inside or outside a bar to be no larger than the bar itself.
customdata
Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, *scatter* traces also appends customdata items in the markers DOM elements
customdatasrc
Sets the source reference on plot.ly for customdata .
dx
Sets the x coordinate step. See `x0` for more info.
dy
Sets the y coordinate step. See `y0` for more info.
error_x
error_y
hoverinfo
Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.
hoverinfosrc
Sets the source reference on plot.ly for hoverinfo .
hoverlabel
hovertext
Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a *text* flag.
hovertextsrc
Sets the source reference on plot.ly for hovertext .
ids
Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.
idssrc
Sets the source reference on plot.ly for ids .
insidetextfont
legendgroup
Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.
marker
name
Sets the trace name. The trace name appear as the legend item and on hover.
offset
Shifts the position where the bar is drawn (in position axis units). In *group* barmode, traces that set *offset* will be excluded and drawn in *overlay* mode instead.
offsetsrc
Sets the source reference on plot.ly for offset .
opacity
Sets the opacity of the trace.
orientation
Sets the orientation of the bars. With *v* (*h*), the value of the each bar spans along the vertical (horizontal).
outsidetextfont
r
For legacy polar chart only.Please switch to *scatterpolar* trace type.Sets the radial coordinates.
rsrc
Sets the source reference on plot.ly for r .
selected
selectedpoints
Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.
showlegend
Determines whether or not an item corresponding to this trace is shown in the legend.
stream
t
For legacy polar chart only.Please switch to *scatterpolar* trace type.Sets the angular coordinates.
text
Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a *text* flag and *hovertext* is not set, these elements will be seen in the hover labels.
textfont
textposition
Specifies the location of the `text`. *inside* positions `text` inside, next to the bar end (rotated and scaled if needed). *outside* positions `text` outside, next to the bar end (scaled if needed). *auto* positions `text` inside or outside so that `text` size is maximized.
textpositionsrc
Sets the source reference on plot.ly for textposition .
textsrc
Sets the source reference on plot.ly for text .
tsrc
Sets the source reference on plot.ly for t .
uid
unselected
visible
Determines whether or not this trace is visible. If *legendonly*, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).
width
Sets the bar width (in position axis units).
widthsrc
Sets the source reference on plot.ly for width .
x
Sets the x coordinates.
x0
Alternate to `x`. Builds a linear space of x coordinates. Use with `dx` where `x0` is the starting coordinate and `dx` the step.
xaxis
Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If *x* (the default value), the x coordinates refer to `layout.xaxis`. If *x2*, the x coordinates refer to `layout.xaxis2`, and so on.
xcalendar
Sets the calendar system to use with `x` date data.
xsrc
Sets the source reference on plot.ly for x .
y
Sets the y coordinates.
y0
Alternate to `y`. Builds a linear space of y coordinates. Use with `dy` where `y0` is the starting coordinate and `dy` the step.
yaxis
Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If *y* (the default value), the y coordinates refer to `layout.yaxis`. If *y2*, the y coordinates refer to `layout.xaxis2`, and so on.
ycalendar
Sets the calendar system to use with `y` date data.
ysrc
Sets the source reference on plot.ly for y .
AUTHOR
Pablo Rodríguez González <pablo.rodriguez.gonzalez@gmail.com>
COPYRIGHT AND LICENSE
This software is Copyright (c) 2017 by Pablo Rodríguez González.
This is free software, licensed under:
The MIT (X11) License