/ 
Chart-Plotly-0.016
River stage one • 2 direct dependents • 2 total dependents
/ Chart::Plotly::Trace::Scatter3d::Marker

NAME

Chart::Plotly::Trace::Scatter3d::Marker

VERSION

version 0.016

SYNOPSIS

use Chart::Plotly qw(show_plot);
use Chart::Plotly::Trace::Scatter3d;
use English qw(-no_match_vars);
use Const::Fast;

const my $PI => 4 * atan2( 1, 1 );
const my $DELTA => 0.1;
my ( @x, @y, @z );
for ( my $u = 0; $u <= 2 * $PI; $u += $DELTA ) {
    for ( my $v = -1; $v < 1; $v += $DELTA ) {
        push @x, ( 1 + ( $v / 2 ) * cos( $u / 2 ) ) * cos($u);
        push @y, ( 1 + ( $v / 2 ) * cos( $u / 2 ) ) * sin($u);
        push @z, ( $v / 2 ) * sin( $u / 2 );
    }
}
my $scatter3d = Chart::Plotly::Trace::Scatter3d->new( x => \@x, y => \@y, z => \@z, mode => 'lines' );

show_plot( [$scatter3d] );

DESCRIPTION

This attribute is part of the possible options for the trace scatter3d.

This file has been autogenerated from the official plotly.js source.

If you like Plotly, please support them: https://plot.ly/ Open source announcement: https://plot.ly/javascript/open-source-announcement/

Full reference: https://plot.ly/javascript/reference/#scatter3d

NAME

Chart::Plotly::Trace::Scatter3d::Marker

DISCLAIMER

This is an unofficial Plotly Perl module. Currently I'm not affiliated in any way with Plotly. But I think plotly.js is a great library and I want to use it with perl.

METHODS

TO_JSON

Serialize the trace to JSON. This method should be called only by JSON serializer.

ATTRIBUTES

  • autocolorscale

    Has an effect only if `marker.color` is set to a numerical array. Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `marker.colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

  • cauto

    Has an effect only if `marker.color` is set to a numerical array and `cmin`, `cmax` are set by the user. In this case, it controls whether the range of colors in `colorscale` is mapped to the range of values in the `color` array (`cauto: true`), or the `cmin`/`cmax` values (`cauto: false`). Defaults to `false` when `cmin`, `cmax` are set by the user.

  • cmax

    Has an effect only if `marker.color` is set to a numerical array. Sets the upper bound of the color domain. Value should be associated to the `marker.color` array index, and if set, `marker.cmin` must be set as well.

  • cmin

    Has an effect only if `marker.color` is set to a numerical array. Sets the lower bound of the color domain. Value should be associated to the `marker.color` array index, and if set, `marker.cmax` must be set as well.

  • color

    Sets the marker color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `cmin` and `cmax` if set.

  • colorbar

  • colorscale

    Sets the colorscale and only has an effect if `marker.color` is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)', [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.cmin` and `marker.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Greys, YlGnBu, Greens, YlOrRd, Bluered, RdBu, Reds, Blues, Picnic, Rainbow, Portland, Jet, Hot, Blackbody, Earth, Electric, Viridis, Cividis

  • colorsrc

    Sets the source reference on plot.ly for color .

  • line

  • opacity

    Sets the marker opacity. Note that the marker opacity for scatter3d traces must be a scalar value for performance reasons. To set a blending opacity value (i.e. which is not transparent), set *marker.color* to an rgba color and use its alpha channel.

  • reversescale

    Has an effect only if `marker.color` is set to a numerical array. Reverses the color mapping if true (`cmin` will correspond to the last color in the array and `cmax` will correspond to the first color).

  • showscale

    Has an effect only if `marker.color` is set to a numerical array. Determines whether or not a colorbar is displayed.

  • size

    Sets the marker size (in px).

  • sizemin

    Has an effect only if `marker.size` is set to a numerical array. Sets the minimum size (in px) of the rendered marker points.

  • sizemode

    Has an effect only if `marker.size` is set to a numerical array. Sets the rule for which the data in `size` is converted to pixels.

  • sizeref

    Has an effect only if `marker.size` is set to a numerical array. Sets the scale factor used to determine the rendered size of marker points. Use with `sizemin` and `sizemode`.

  • sizesrc

    Sets the source reference on plot.ly for size .

  • symbol

    Sets the marker symbol type.

  • symbolsrc

    Sets the source reference on plot.ly for symbol .

AUTHOR

Pablo Rodríguez González <pablo.rodriguez.gonzalez@gmail.com>

COPYRIGHT AND LICENSE

This software is Copyright (c) 2017 by Pablo Rodríguez González.

This is free software, licensed under:

The MIT (X11) License