/ 
RTx-EmailCompletion-0.04
River stage zero No dependents
/ RTx::EmailCompletion

NAME

RTx::EmailCompletion - Add auto completion on RT email fields

VERSION

This document describes version 0.04 of RTx::EmailCompletion.

DESCRIPTION

I'm so tired to type email address by hand that I've done this module to add AJAX autocompletion on all email field of RT. As adding completion is dynamic, it should work on most RT releases (see later if it's not the case).

There's 4 things :

  • a small web service html/Ajax/EmailCompletion which search in all known users in the database ;

  • prototype library to manipulate DOM and scriptaculous library to autocomplete ;

  • a small javascript which parse html pages and add autocomplete on known input tags.

  • a perl module to handle all the logic

INSTALLATION

if upgrading from 0.01, see later UPGRADE FROM 0.01.

if you've already use an earlier version of this module with RT >= 3.8, see later SCRIPTACULOUS AND RT 3.8

Install it like a standard perl module :

RTHOME=/opt/rt3 perl Makefile.PL
make
make install

CONFIGURATION

This section is fairly long but you don't really need to read it if you just want the basic : autocompletion only for privileged users against all registred users of RT database.

unprivileged users autocompletion

By default, completion works only for privileged users.

You can activate it for unprivileged users (in the SelfService) by setting $EmailCompletionUnprivileged in RTHOME/etc/RT_SiteConfig.pm. There's three ways :

  • show everybody

    Set($EmailCompletionUnprivileged,"everybody");

    Be careful, this will also show all yours LDAP users.

  • show only privileged users

    Set($EmailCompletionUnprivileged,"privileged");

    This won't show LDAP users

  • show only email matching a regexp

    Set($EmailCompletionUnprivileged, qr/\@my\.corp\.domain$/ );

    This will also show LDAP user mails that matchs the regexp

change the database clause to search email

You can also change the operator used in the where clause to search email with the global var $RT::EmailCompletionSearch. The default one is LIKE.

To change it, add a line like this in RTHOME/etc/RT_SiteConfig.pm :

Set($EmailCompletionSearch, "STARTSWITH");

This variable can take the values LIKE, STARTSWITH and ENDSWITH.

By default, the plugin searches on Users.EmailAddress.

You can change where it searches by setting $EmailCompletionSearchFields in RTHOME/etc/RT_SiteConfig.pm to an arrayref of fields from the Users table.

Set( $EmailCompletionSearchFields, [qw(EmailAddress RealName Name)] );

This would allow you to search by usernames, full names and email addresses

LDAP configuration

Starting with RTx::EmailCompletion 0.03, autocompletion works with LDAP servers.

If you already have installed and configured LDAP authentication overlay, this configuration will be used and it should/could work just as it is.

The following configuration parameters applied :

  • EmailCompletionLdapServer : the ldap server (mandatory)

    Set($EmailCompletionLdapServer, "my.ldap.server");

    If not set, RTx::EmailCompletion will search for LdapServer parameter (configured for the LDAP RT authentification layout and some others LDAP RT extensions).

  • EmailCompletionLdapBase : the ldap base (mandatory)

    Set($EmailCompletionLdapBase, "dc=debian,dc=org");

    If not set, RTx::EmailCompletion will search for LdapBase parameter (configured for the LDAP RT authentification layout and some others LDAP RT extensions).

  • EmailCompletionLdapUser : the ldap user if you need authentication

    Set($EmailCompletionLdapUser, "myldapuser");

    If not set, RTx::EmailCompletion will search for LdapUser parameter (configured for the LDAP RT authentification layout and some others LDAP RT extensions).

  • EmailCompletionLdapPass : the ldap password if you need authentication

    Set($EmailCompletionLdapPass, "mypassword");

    If not set, RTx::EmailCompletion will search for LdapPass parameter (configured for the LDAP RT authentification layout and some others LDAP RT extensions).

  • EmailCompletionLdapFilter : the ldap filter if needed

    Set($EmailCompletionLdapFilter, "(objectclass=person)");

    If not set, RTx::EmailCompletion will search for LdapFilter parameter (configured for the LDAP RT authentification layout).

  • EmailCompletionLdapAttrSearch : the ldap search attributes

    Set($EmailCompletionLdapAttrSearch, [qw/mail cn/]);

    Default value is mail.

  • EmailCompletionLdapAttrShow : the mail attribute name

    Set($EmailCompletionLdapAttrShow, "mail");

    Default value is mail

  • EmailCompletionLdapMinLength : minimum parameter length to send an ldap request

    Set(EmailCompletionLdapMinLength, 6);

    Default value is 4

The minimum LDAP configuration look somethink like this :

Set($EmailCompletionLdapServer, "db.debian.org");
Set($EmailCompletionLdapBase, "dc=debian,dc=org");

You can disable ldap completion (useful if you have installed ldap authentication overlay and you don't want ldap completion) with :

Set($EmailCompletionLdapDisabled, 1);

If you want to keep only LDAP completion, you can also disable RDBMS :

Set($EmailCompletionRdbmsDisabled, 1);

The given value must be true for perl.

HOW TO ADD FIELD TO AUTOCOMPLETION

If you find email field without autocomplete, you can modify html/NoAuth/js/emailcompletion.js to handle this field (and email me to patch this module).

At the beginning of this file you will find two global vars multipleCompletion and singleCompletion. They are array of regexp.

Regexp must match all the word because ^ and $ are added for matching. So if you want to match Field1 and Field2 you must add something like Field. or better Field[12].

To verify that javascript find your input tag, you can uncomment the line just after the "DEBUGGING PURPOSE" one. All input tags find by the script will appear with a big red border.

UPGRADE FROM 0.01

As directory structure has change, If you upgrade from 0.01, you must delete :

RTHOME/local/html/Ajax/EmailCompletion
RTHOME/local/html/NoAuth/js/emailcompletion.js
RTHOME/local/html/NoAuth/js/
RTHOME/local/html/NoAuth/css/emailcompletion.css

Be careful if you have other javascripts in RTHOME/local/html/NoAuth/js/

SCRIPTACULOUS AND RT 3.8

RT 3.8 and later come with their own scriptaculous library. So if you have installed an earlier release of this module with RT 3.8 and later, the original scriptaculous will be overriden by this module.

The best solution is to remove RTHOME/share/html/NoAuth/js/ and copy RTSOURCE/share/html/NoAuth/js/ to RTHOME/share/html/NoAuth/.

This release is not subject to this problem.

HISTORY

The first version (unreleased) modify html pages. The better method actually used allow this module to be compatible with, virtually, all RT release.

AUTHORS

Nicolas Chuche <nchuche@barna.be>

COPYRIGHT

Copyright 2007 by Nicolas Chuche <nchuche@barna.be>

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

See http://www.perl.com/perl/misc/Artistic.html

All Scriptaculous and Prototype program are placed under MIT licence and are copyrighted by their owners (see top of files).