NAME
App::plx - Perl Layout Executor
SYNOPSIS
plx --help # This output
plx --init <perl> # Initialize layout config
plx --perl # Show layout perl binary
plx --libs # Show layout $PERL5LIB entries
plx --paths # Show layout additional $PATH entries
plx --cpanm -llocal --installdeps . # Run cpanm from outside $PATH
plx perl <args> # Run perl within layout
plx -E '...' # (ditto)
plx script-in-dev <args> # Run dev/ script within layout
plx script-in-bin <args> # Run bin/ script within layout
plx script/in/cwd <args> # Run script within layout
plx program <args> # Run program from layout $PATHWHY PLX
While perl has many tools for configuring per-project development environments, using them can still be a little on the lumpy side. With Carton, you find yourself running one of
perl -Ilocal/lib/perl -Ilib bin/myapp
carton exec perl -Ilib bin/myappWith App::perlbrew,
perlbrew switch perl-5.28.0@libname
perl -Ilib bin/myappWith https://github.com/tokuhirom/plenv,
plenv exec perl -Ilib bin/myappand if you have more than one distinct layer of dependencies, while local::lib will happily handle that, integrating it with everything else becomes a pain in the buttocks.
As a result of this, your not-so-humble author found himself regularly having a miniature perl executor script at the root of git clones that looked something like:
#!/bin/sh
eval $(perl -Mlocal::lib=--deactivate-all)
export PERL5LIB=$PWD/local/lib/perl5
bin=$1
shift
~/perl5/perlbrew/perls/perl-5.28.0/bin/$bin "$@"and then running:
./pl perl -Ilib bin/myappHowever, much like back in 2007 frustration with explaining to other developers how to set up CPAN to install into ~/perl5 and how to set up one's environment variables to then find the modules so installed led to the exercise in rage driven development that first created local::lib, walking newbies through the creation and subsequent use of such a script was not the most enjoyable experience for anybody involved.
Thus, the creation of this module to reduce the setup process to:
cpanm App::plx
cd MyProject
plx --init 5.28.0
plx --cpanm -llocal --notest --installdeps .Follwed by being able to immediately (and even more concisely) run:
plx myappwhich will execute perl -Ilib bin/myapp with the correct perl and the relevant local::lib already in scope.
If this seems of use to you, the QUICKSTART is next and the ACTIONS section of this document lists the full capabilities of plx. Onwards!
QUICKSTART
Let's assume we're going to be working on Foo-Bar, so we start with:
git clone git@github.com:arthur-nonymous/Foo-Bar.git
cd Foo-BarAssuming the perl we'd get from running just perl suffices, then we next run:
plx --initIf we want a different perl - say, we have a perl5.30.1 in our path, or a perl-5.30.1 built in perlbrew, we'd instead run:
plx --init 5.30.1To quickly get our dependencies available, we then run:
plx --cpanm -llocal --notest --installdeps .If the project is designed to use Carton and has a cpanfile.snapshot, instead we would run:
plx --cpanm -ldevel --notest Carton
plx carton installIf the goal is to test this against our current development version of another library, then we'd also want to run:
plx --config libspec add 40otherlib.dir ../Other-Lib/libIf we want our ~/perl local::lib available within the plx environment, we can add that as the least significant libspec with:
plx --config libspec add 00tilde.ll $HOME/perl5At which point, we're ready to go, and can run:
plx myapp # to run bin/myapp
plx t/foo.t # to run one test file
plx prove # to run all t/*.t test files
plx -E 'say for @INC' # to run a one liner within the layoutTo learn everything else plx is capable of, read on to the ACTIONS section coming next.
Have fun!
ACTIONS
plx --help # Print synopsis
plx --init <perl> # Initialize layout config
plx --perl # Show layout perl binary
plx --libs # Show layout $PERL5LIB entries
plx --paths # Show layout additional $PATH entries
plx --cpanm -llocal --installdeps . # Run cpanm from outside $PATH
plx --config perl # Show perl binary
plx --config perl show # Show perl binary
plx --config perl set /path/to/perl # Select exact perl binary
plx --config perl set perl-5.xx.y # Select perl via $PATH or perlbrew
plx --config libspec # Show lib specifications
plx --config libspec show # Show lib specifications
plx --config libspec add <name> <path> # Add lib specification
plx --config libspec del <name> <path> # Delete lib specification
plx --exec <cmd> <args> # exec()s with env vars set
plx --perl <args> # Run perl with args
plx --bin <script> <args> # Run script from bin/
plx --dev <script> <args> # Run script from dev/
plx --cmd <cmd> <args> # DWIM command:
cmd = perl -> --perl <args>
cmd = -<flag> -> --perl -<flag> <args>
cmd = some/file -> --perl some/file <args>
cmd = ./file -> --perl ./file <args>
cmd = name ->
exists dev/<name> -> --dev <name> <args>
exists bin/<name> -> --bin <name> <args>
else -> --exec <name> <args>
plx <something> <args> # Shorthand for plx --cmd--help
Prints out the usage information (i.e. the "SYNOPSIS") for plx.
--init
plx --init # resolve 'perl' in $PATH
plx --init perl # (ditto)
plx --init 5.28.0 # looks for perl5.28.0 in $PATH
# or perl-5.28.0 in perlbrew
plx --init /path/to/some/perl # uses the absolute path directlyInitializes the layout.
If a perl name is passed, attempts to resolve it via $PATH and perlbrew and sets the result as the layout perl; if not looks for just perl.
Creates the following libspec config:
25local.ll local
50devel.ll devel
75lib.dir lib--libs
Prints the directories that will be added to PERL5LIB, one per line.
These will include the lib/perl5 subdirectory for each ll entry in the libspecs, and the directory for each dir entry.
--paths
Prints the directories that will be added to PATH, one per line.
These will include the containing directory of the environment's perl binary if not already in PATH, followed by the bin directories of any ll entries in the libspecs.
--cpanm
plx --cpanm -Llocal --installdeps .
plx --cpanm -ldevel App::AckFinds the cpanm binary in the PATH that plx was executed from, and executes it using the layout's perl binary and environment variables.
Requires the user to specify a local::lib to install into via -l or -L in order to avoid installing modules into unexpected places.
Note that this action exists primarily for bootstrapping, and if you want to use a different installer such as App::cpm, you'd install it with:
plx --cpanm -ldevel App::cpmand then subsequently run e.g.
plx cpm install App::Ackto install modules.
--exec
plx --exec <command> <args>Sets up the layout's environment variables and execs the command.
--perl
plx --perl
plx --perl <options> <script> <args>Without arguments, sugar for --config perl show.
Otherwise, sets up the layout's environment variables and execs the layout's perl with the given options and arguments.
--dev
plx --dev <script> <args>Runs dev/script ala --perl.
Much like the devel local::lib is created to allow for the installation of out-of-band dependencies that aren't going to be needed in production, the dev directory is supported to allow for the easy addition of development time only sugar commands. Note that since perl will re-exec anything with a non-perl shebang, one can add wrappers here ala:
$ cat dev/prove
#!/bin/sh
exec prove -j8 "$@"--bin
plx --bin <script> <args>Runs bin/script ala --perl.
--cmd
plx --cmd <cmd> <args> # DWIM command:
cmd = perl -> --perl <args>
cmd = -<flag> -> --perl -<flag> <args>
cmd = some/file -> --perl some/file <args>
cmd = ./file -> --perl ./file <args>
cmd = name ->
exists dev/<name> -> --dev <name> <args>
exists bin/<name> -> --bin <name> <args>
else -> --exec <name> <args>--config
plx --config # Show current config
plx --config <name> # Alias for --config <name> show
plx --config <name> <operation> # Invoke config operationperl
plx --config perl show
plx --config perl set <spec>If the spec passed to set contains a / character, plx assumes that it's an absolute bath and records it as-is.
If not, we go a-hunting.
First, if the spec begins with a 5, we replace it with perl5.
Second, we search $PATH for a binary of that name, and record it if so.
Third, if the (current) spec begins perl5, we replace it with perl-5.
Fourth, we search $PATH for a perlbrew binary, and ask it if it has a perl named after the spec, and record that if so.
Fifth, we shrug and hope the user can come up with an absolute path next time.
Note: The original spec passed to set is recorded in .plx/perl.spec, so if you intend to share the .plx directory across multiple machines via version control or otherwise, remove/exclude the .plx/perl file and plx will automatically attempt to re-locate the perl on first invocation.
libspec
plx --config libspec show
plx --config libspec add <name> <spec>
plx --config libspec del <name> <spec>A libspec config entry consists of a name and a spec, and the show output prints them space separated one per line, with enough spaces to make the specs align:
25local.ll local
50devel.ll devel
75lib.dir libThe part of the name before the last . is not semantically significant to plx, but is used for asciibetical sorting of the libspec entries to determine in which order to apply them.
The part after must be either ll for a local::lib, or dir for a bare lib directory.
When loaded, the spec is (if relative) resolved to an absolute path relative to the layout root, then all .. entries and symlinks resolved to give a final path used to set up the layout environment.
AUTHOR
mst - Matt S. Trout (cpan:MSTROUT) <mst@shadowcat.co.uk>CONTRIBUTORS
None yet - maybe this software is perfect! (ahahahahahahahahaha)
COPYRIGHT
Copyright (c) 2020 the App::plx "AUTHOR" and "CONTRIBUTORS" as listed above.
LICENSE
This library is free software and may be distributed under the same terms as perl itself.