/ 
SNMP-Info-0.2
River stage one • 1 direct dependent • 1 total dependent
/ SNMP::Info::Layer2::HP

NAME

SNMP::Info::Layer2::HP - SNMP Interface to HP Procurve Switches

DESCRIPTION

Provides abstraction to the configuration information obtainable from a HP device through SNMP. Information is stored in a number of MIB's such as IF-MIB, ENTITY-MIB, RFC1271-MIB, HP-ICF-OID, MAU-MIB

MIBs required:

RFC1271-MIB
HP-ICF-OID

HP MIBs can be found at http://www.hp.com/rnd/software

AUTHOR

Max Baker (max@warped.org)

SYNOPSIS

my $hp = new SNMP::Info::Layer2::HP(DestHost  => 'router' , 
                             Community => 'public' );

CREATING AN OBJECT

new SNMP::Info::Layer2::HP()

Arguments passed to new() are passed on to SNMP::Session::new()

my $hp = new SNMP::Info::Layer2::HP(
    DestHost => $host,
    Community => 'public',
    Version => 3,...
    ) 
die "Couldn't connect.\n" unless defined $hp;
$hp->session()

Sets or returns the SNMP::Session object

# Get
my $sess = $hp->session();

# Set
my $newsession = new SNMP::Session(...);
$hp->session($newsession);
$hp->all(), $hp->load_all()

Runs each of the HP List methods and returns a hash reference.

$hp->all() will call $hp->load_all() once and then return cahced valued. Use $hp->load_all() to reload from the device.

HP Global Configuration Values

$hp->name() (sysName)
$hp->ip() (sysIpAddr)
$hp->netmask() (sysNetMask)
$hp->broadcast() (sysBroadcast)
$hp->location() (sysLocation)
$hp->contact() (sysContact)
$hp->description() (sysDescr)
$hp->layers() (sysServices)
$hp->serial() (chassisSerialNumberString)
$hp->model() (chassisModel)
$hp->ps1_type() (chassisPs1Type)
$hp->ps2_type() (chassisPs2Type)
$hp->ps1_status() (chassisPs1Status)
$hp->ps2_status() (chassisPs2Status)
$hp->slots() (chassisNumSlots)
$hp->fan() (chassisFanStatus)

CATALYST TABLE ENTRIES

Module table

$hp->m_type(), $hp->load_m_type() (moduleType)
$hp->m_model(), $hp->load_m_model() (moduleModel)
$hp->m_serial(), $hp->load_m_serial() (moduleSerialNumber)
$hp->m_status(), $hp->load_m_status() (moduleStatus)
$hp->m_name(), $hp->load_m_name() (moduleName)
$hp->m_ports(), $hp->load_m_ports() (moduleNumPorts)
$hp->m_ports_status(), $hp->load_m_ports_status() Returns a list of space separated status strings for the ports. To see the status of port 4 : @ports_status = split(' ', $hp->m_ports_status() ); $port4 = $ports_status[3];

(modulePortStatus)

$hp->m_ports_hwver(), $hp->load_m_ports_hwver() (moduleHwVersion)
$hp->m_ports_fwver(), $hp->load_m_ports_fwver() (moduleFwVersion)
$hp->m_ports_swver(), $hp->load_m_ports_swver() (moduleSwVersion)
$hp->m_ports_ip(), $hp->load_m_ports_ip() (moduleIPAddress)
$hp->m_ports_sub1(), $hp->load_m_ports_sub1() (moduleSubType)
$hp->m_ports_sub2(), $hp->load_m_ports_sub2() (moduleSubType2)

Port Entry Table

$hp->p_name(), $hp->load_p_name() (portName)
$hp->p_type(), $hp->load_p_type() (portType)
$hp->p_status(), $hp->load_p_status() (portOperStatus)
$hp->p_status2(), $hp->load_p_status2() (portAdditionalStatus)
$hp->p_speed(), $hp->load_p_speed() (portAdminSpeed)
$hp->p_duplex(), $hp->load_p_duplex() (portDuplex)
$hp->p_port(), $hp->load_p_port() (portIfIndex)

VLAN Entry Table

ftp://ftp.cisco.com/pub/mibs/supportlists/wsc5000/wsc5000-communityIndexing.html

$hp->v_state(), $hp->load_v_state() (vtpVlanState)
$hp->v_type(), $hp->load_v_type() (vtpVlanType)
$hp->v_name(), $hp->load_v_name() (vtpVlanName)
$hp->v_mtu(), $hp->load_v_mtu() (vtpVlanMtu)