/ 
RadiusPerl-0.21
River stage zero No dependents
/ Authen::Radius

NAME

Authen::Radius - provide simple Radius client facilities

SYNOPSIS

  use Authen::Radius;

  $r = new Authen::Radius(Host => 'myserver', Secret => 'mysecret');
  print "auth result=", $r->check_pwd('myname', 'mypwd'), "\n";

  $r = new Authen::Radius(Host => 'myserver', Secret => 'mysecret');
  Authen::Radius->load_dictionary();
  $r->add_attributes (
  		{ Name => 'User-Name', Value => 'myname' },
  		{ Name => 'Password', Value => 'mypwd' },
# RFC 2865 http://www.ietf.org/rfc/rfc2865.txt calls this attribute
# User-Password. Check your local RADIUS dictionary to find
# out which name is used on your system
#  		{ Name => 'User-Password', Value => 'mypwd' },
  		{ Name => 'h323-return-code', Value => '0' }, # Cisco AV pair
		{ Name => 'Digest-Attributes', Value => { Method => 'REGISTER' } }
  );
  $r->send_packet(ACCESS_REQUEST) and $type = $r->recv_packet();
  print "server response type = $type\n";
  for $a ($r->get_attributes()) {
  	print "attr: name=$a->{'Name'} value=$a->{'Value'}\n";
  }

DESCRIPTION

The Authen::Radius module provides a simple class that allows you to send/receive Radius requests/responses to/from a Radius server.

CONSTRUCTOR

new ( Host => HOST, Secret => SECRET [, TimeOut => TIMEOUT] [,Service => SERVICE] [, Debug => Bool] [, LocalAddr => hostname[:port]] [,Rfc3579MessageAuth => Bool] [,NodeList= NodeListArrayRef])

Creates & returns a blessed reference to a Radius object, or undef on failure. Error status may be retrieved with Authen::Radius::get_error (errorcode) or Authen::Radius::strerror (verbose error string).

The default Service is radius, the alternative is radius-acct. If you do not specify port in the Host as a hostname:port, then port specified in your /etc/services will be used. If there is nothing there, and you did not specify port either then default is 1645 for radius and 1813 for radius-acct.

Optional parameter Debug with a Perl "true" value turns on debugging (verbose mode).

Optional parameter LocalAddr may contain local IP/host bind address from which RADIUS packets are sent.

Optional parameter Rfc3579MessageAuth with a Perl "true" value turns on generating of Message-Authenticator for Access-Request (RFC3579, section 3.2).

Optional parameter NodeList may contain a Perl reference to an array, containing a list of Radius Cluster nodes. Each nodes in the list can be specified using a hostname or IP (with an optional port number), i.e. 'radius1.mytel.com' or 'radius.myhost.com:1812'. Radius Cluster contains a set of Radius servers, at any given moment of time only one server is considered to be "active" (so requests are send to this server). How the active node is determined? Initially in addition to the NodeList parameter you may supply the Host parameter and specify which server should become the first active node. If this parameter is absent, or the current active node does not reply anymore, the process of "discovery" will be performed: a request will be sent to all nodes and the consecutive communication continues with the node, which will be the first to reply.

METHODS

load_dictionary ( [ DICTIONARY ] )

Loads the definitions in the specified Radius dictionary file (standard Livingston radiusd format). Tries to load '/etc/raddb/dictionary' when no argument is specified, or dies. NOTE: you need to load valid dictionary if you plan to send RADIUS requests with attributes other than just User-Name/Password.

check_pwd ( USERNAME, PASSWORD [,NASIPADDRESS] )

Checks with the RADIUS server if the specified PASSWORD is valid for user USERNAME. Unless NASIPADDRESS is specified, the script will attempt to determine it's local IP address (IP address for the RADIUS socket) and this value will be placed in the NAS-IP-Address attribute. This method is actually a wrapper for subsequent calls to clear_attributes, add_attributes, send_packet and recv_packet. It returns 1 if the PASSWORD is correct, or undef otherwise.

add_attributes ( { Name => NAME, Value => VALUE [, Type => TYPE] [, Vendor => VENDOR] }, ... )

Adds any number of Radius attributes to the current Radius object. Attributes are specified as a list of anon hashes. They may be Named with their dictionary name (provided a dictionary has been loaded first), or with their raw Radius attribute-type values. The Type pair should be specified when adding attributes that are not in the dictionary (or when no dictionary was loaded). Values for TYPE can be 'string', 'integer', 'ipaddr' or 'avpair'.

get_attributes

Returns a list of references to anon hashes with the following key/value pairs : { Name => NAME, Code => RAWTYPE, Value => VALUE, RawValue => RAWVALUE, Vendor => VENDOR }. Each hash represents an attribute in the current object. The Name and Value pairs will contain values as translated by the dictionary (if one was loaded). The Code and RawValue pairs always contain the raw attribute type & value as received from the server. If some attribute doesn't exist in dictionary or type of attribute not specified then corresponding Value undefined and Name set to attribute ID (Code value).

clear_attributes

Clears all attributes for the current object.

send_packet ( REQUEST_TYPE, RETRANSMIT )

Packs up a Radius packet based on the current secret & attributes and sends it to the server with a Request type of REQUEST_TYPE. Exported REQUEST_TYPE methods are 'ACCESS_REQUEST', 'ACCESS_ACCEPT' , 'ACCESS_REJECT', 'ACCOUNTING_REQUEST', 'ACCOUNTING_RESPONSE', 'DISCONNECT_REQUEST' and 'COA_REQUEST'. Returns the number of bytes sent, or undef on failure.

If the RETRANSMIT parameter is provided and contains a non-zero value, then it is considered that we are re-sending the request, which was already sent previously. In this case the previous value of packet indentifier is used.

recv_packet ( DETECT_BAD_ID )

Receives a Radius reply packet. Returns the Radius Reply type (see possible values for REQUEST_TYPE in method send_packet) or undef on failure. Note that failure may be due to a failed recv() or a bad Radius response authenticator. Use get_error to find out.

If the DETECT_BAD_ID parameter is supplied and contains a non-zero value, then calculation of the packet indentifier is performed before authenticator check and EBADID error returned in case when packet indentifier from the response doesn't match to the request. If the DETECT_BAD_ID is not provided or contains zero value then EBADAUTH returned in such case.

get_error

Returns the last ERRORCODE for the current object. Errorcodes are one-word strings always beginning with an 'E'.

strerror ( [ ERRORCODE ] )

Returns a verbose error string for the last error for the current object, or for the specified ERRORCODE.

error_comment

Returns the last error explanation for the current object. Error explanation is generated by system call.

get_active_node

Returns currently active radius node in standard numbers-and-dots notation with port delimited by colon.

AUTHOR

Carl Declerck <carl@miskatonic.inbe.net> - original design Alexander Kapitanenko <kapitan at portaone.com> and Andrew Zhilenko <andrew at portaone.com> - later modifications.

PortaOne Development Team <perl-radius at portaone.com> is the current module's maintaner at CPAN.