NAME

Pod::Simple::Subclassing -- write a formatter as a Pod::Simple subclass

SYNOPSIS

package Pod::SomeFormatter;
use Pod::Simple;
@ISA = qw(Pod::Simple);
$VERSION = '1.01';
use strict;

sub _handle_element_start {
  my($parser, $element_name, $attr_hash_r) = @_;
  ...
}

sub _handle_element_end {
  my($parser, $element_name) = @_;
  ...
}

sub _handle_text {
  my($parser, $text) = @_;
  ...
}
1;

DESCRIPTION

This document is about using Pod::Simple to write a Pod processor, generally a Pod formatter. If you just want to know about using an existing Pod formatter, instead see its documentation and see also the docs in Pod::Simple.

The zeroeth step in writing a Pod formatter is to make sure that there isn't already a decent one in CPAN. See http://search.cpan.org/, and run a search on the name of the format you want to render to. Also consider joining the Pod People list http://lists.perl.org/showlist.cgi?name=pod-people and asking whether anyone has a formatter for that format -- maybe someone cobbled one together but just hasn't released it.

The first step in writing a Pod processor is to read perlpodspec, which contains notes information on writing a Pod parser (which has been largely taken care of by Pod::Simple), but also a lot of requirements and recommendations for writing a formatter.

The second step is to actually learn the format you're planning to format to -- or at least as much as you need to know to represent Pod, which probably isn't much.

The third step is to pick which of Pod::Simple's interfaces you want to use -- the basic interface via Pod::Simple or Pod::Simple::Methody is event-based, sort of like HTML::Parser's interface, or sort of like XML::Parser's "Handlers" interface), but Pod::Simple::PullParser provides a token-stream interface, sort of like HTML::TokeParser's interface; Pod::Simple::SimpleTree provides a simple tree interface, rather like XML::Parser's "Tree" interface. Users familiar with XML-handling will find one of these styles relatively familiar; but if you would be even more at home with XML, there are classes that produce an XML representation of the Pod stream, notably Pod::Simple::XMLOutStream; you can feed the output of such a class to whatever XML parsing system you are most at home with.

The last step is to write your code based on how the events (or tokens, or tree-nodes, or the XML, or however you're parsing) will map to constructs in the output format. Also sure to consider how to escape text nodes containing arbitrary text, and also what to do with text nodes that represent preformatted text (from verbatim sections).

Events

TODO intro... mention that events are supplied for implicits, like for missing closures.

In the following section, we use XML to represent the event structure associated with a particular construct. That is, TODO

$parser->_handle_element_start( element_name, attr_hashref )
$parser->_handle_element_end( element_name )
$parser->_handle_text( text_string )

TODO describe

events with an element_name of Document

Parsing a document produces this event structure:

<Document start_line="543">
  ...all events...
</Document>

The value of the start_line attribute will be the line number of the first Pod directive in the document.

If there is no Pod in the given document, then the event structure will be this:

<Document contentless="1" start_line="543">
</Document>

In that case, the value of the start_line attribute will not be meaningful; under current implementations, it will probably be the line number of the last line in the file.

events with an element_name of Para

Parsing a plain (non-verbatim, non-directive, non-data) paragraph in a Pod document produces this event structure:

<Para start_line="543">
  ...all events in this paragraph...
</Para>

The value of the start_line attribute will be the line number of the start of the paragraph.

For example, parsing this paragraph of Pod:

The value of the I<start_line> attribute will be the
line number of the start of the paragraph.

produces this event structure:

<Para start_line="129">
  The value of the 
  <I>
    start_line
  </I>
   attribute will be the line number of the first Pod directive
  in the document.
</Para>

events with an element_name of B, C, F, or I.

Parsing a B<...> formatting code (or of course any of its semantically identical syntactic variants B<< ... >>, or B<<<< ... >>>>, etc.) produces this event structure:

<B>
  ...stuff...
</B>

Currently, there are no attributes conveyed.

Parsing C, F, or I codes produce the same structure, with only a different element name.

If your parser object has been set to accept other formatting codes, then they will be presented like these B/C/F/I codes -- i.e., without any attributes.

events with an element_name of S

Normally, parsing an S<...> sequence produces this event structure, just as if it were a B/C/F/I code:

<S>
  ...stuff...
</S>

However, Pod::Simple (and presumably all derived parsers) offers the nbsp_for_S option which, if enabled, will suppress all S events, and instead change all spaces in the content to non-breaking spaces. This is intended for formatters that output to a format that has no code that means the same as S<...>, but which has a code/character that means non-breaking space.

events with an element_name of X

Normally, parsing an X<...> sequence produces this event structure, just as if it were a B/C/F/I code:

<X>
  ...stuff...
</X>

However, Pod::Simple (and presumably all derived parsers) offers the nix_X_codes option which, if enabled, will suppress all X events and ignore their content. For formatters/processors that don't use X events, this is presumably quite useful.

events with an element_name of L

Because the L<...> is the most complex construct in the language, it should not surprise you that the events it generates are the most complex in the language. Most of complexity is hidden away in the attribute values, so for those of you writing a Pod formatter that produces a non-hypertextual format, you can just ignore the attributes and treat an L event structure like a formatting element that (presumably) doesn't actually produce a change in formatting. That is, the content of the L event structure (as opposed to its attributes) is always what text should be displayed.

There are, at first glance, three kinds of L links: URL, man, and pod.

When a L<some_url> code is parsed, it produces this event structure:

<L content-implicit="yes" to="that_url" type="url">
  that_url
</L>

The type="url" attribute is always specified for this type of L code.

For example, this Pod source:

L<http://www.perl.com/CPAN/authors/>

produces this event structure:

<L content-implicit="yes" to="http://www.perl.com/CPAN/authors/" type="url">
  http://www.perl.com/CPAN/authors/
</L>

When a L<manpage(section)> code is parsed (and these are fairly rare and not terribly useful), it produces this event structure:

<L content-implicit="yes" to="manpage(section)" type="man">
  manpage(section)
</L>

The type="man" attribute is always specified for this type of L code.

For example, this Pod source:

L<crontab(5)>

produces this event structure:

<L content-implicit="yes" to="crontab(5)" type="man">
  crontab(5)
</L>

In the rare cases where a man page link has a specified, that text appears in a section attribute. For example, this Pod source:

L<crontab(5)/"ENVIRONMENT">

will produce this event structure:

<L content-implicit="yes" section="ENVIRONMENT" to="crontab(5)" type="man">
  "ENVIRONMENT" in crontab(5)
</L>

In the rare case where the Pod document has code like L<sometext|manpage(section)>, then the sometext will appear as the content of the element, the manpage(section) text will appear only as the value of the to attribute, and there will be no content-implicit="yes" attribute (whose presence means that the Pod parser had to infer what text should appear as the link text -- as opposed to cases where that attribute is absent, which means that the Pod parser did not have to infer the link text, because that L code explicitly specified some link text.)

For example, this Pod source:

L<hell itself!|crontab(5)>

will produce this event structure:

<L to="crontab(5)" type="man">
  hell itself!
</L>

The last type of L structure is for links to/within Pod documents. It is the most complex because it can have a to attribute, or a section attribute, or both. The type="pod" attribute is always specified for this type of L code.

In the most common case, the simple case of a L<podpage> code produces this event structure:

<L content-implicit="yes" to="Net::Ping" type="pod">
  podpage
</L>

For example, this Pod source:

L<Net::Ping>

produces this event structure:

<L content-implicit="yes" to="Net::Ping" type="pod">
  Net::Ping
</L>

In cases where there is link-text explicitly specified, it is to be found in the content of the element (and not the attributes), just as with the L<sometext|manpage(section)> case discussed above. For example, this Pod source:

L<Perl Error Messages|perldiag>

produces this event structure:

<L to="perldiag" type="pod">
  Perl Error Messages
</L>

In cases of links to a section in the current Pod document, there is a section attribute instead of a to attribute. For example, this Pod source:

L</"Member Data">

produces this event structure:

<L content-implicit="yes" section="Member Data" type="pod">
  "Member Data"
</L>

As another example, this Pod source:

L<the various attributes|/"Member Data">

produces this event structure:

<L section="Member Data" type="pod">
  the various attributes
</L>

In cases of links to a section in a different Pod document, there are both a section attribute and a to attribute. For example, this Pod source:

L<perlsyn/"Basic BLOCKs and Switch Statements">

produces this event structure:

<L content-implicit="yes" section="Basic BLOCKs and Switch Statements" to="perlsyn" type="pod">
  "Basic BLOCKs and Switch Statements" in perlsyn
</L>

As another example, this Pod source:

L<SWITCH statements|perlsyn/"Basic BLOCKs and Switch Statements">

produces this event structure:

<L section="Basic BLOCKs and Switch Statements" to="perlsyn" type="pod">
  SWITCH statements
</L>

Incidentally, note that we do not distinguish between these syntaxes:

L</"Member Data">
L<"Member Data">
L</Member Data>
L<Member Data>    [deprecated syntax]

That is, they all produce the same event structure, namely:

<L content-implicit="yes" section="Member Data" type="pod">
  &#34;Member Data&#34;
</L>

events with an element_name of E or Z

While there are Pod codes E<...> and Z<>, these do not produce any E or Z events -- that is, there are no such events as E or Z.

events with an element_name of Verbatim

When a Pod verbatim paragraph (AKA "codeblock") is parsed, it produces this event structure:

<Verbatim start_line="543" xml:space="preserve">
  ...text...
</Verbatim>

The value of the start_line attribute will be the line number of the first line of this verbatim block. The xml:space attribute is always present, and always has the value "preserve".

The text content will have tabs already expanded.

events with an element_name of head1 .. head4

When a "=head1 ..." directive is parsed, it produces this event structure:

<head1>
  ...stuff...
</head1>

For example, a directive consisting of this:

=head1 Options to C<new> et al.

will produce this event structure:

<head1 start_line="543">
  Options to 
  <C>
    new
  </C>
   et al.
</head1>

"=head2" thru "=head4" directives are the same, except for the element names in the event structure.

events with an element_name of over-bullet

When an "=over ... =back" block is parsed where the items are a bulletted list, it will produce this event structure:

<over-bullet indent="4" start_line="543">
  <item-bullet start_line="545">
    ...Stuff...
  </item-bullet>
  ...more item-bullets...
</over-bullet>

The value of the indent attribute is whatever value is after the "=over" directive, as in "=over 8". If no such value is specified in the directive, then the indent attribute has the value "4".

For example, this Pod source:

=over

=item *

Stuff

=item *

Bar I<baz>!

=back

produces this event structure:

<over-bullet indent="4" start_line="10">
  <item-bullet start_line="12">
    Stuff
  </item-bullet>
  <item-bullet start_line="14">
    Bar <I>baz</I>!
  </item-bullet>
</over-bullet>

events with an element_name of over-number

When an "=over ... =back" block is parsed where the items are a numbered list, it will produce this event structure:

<over-number indent="4" start_line="543">
  <item-number number="1" start_line="545">
    ...Stuff...
  </item-number>
  ...more item-number...
</over-bullet>

This is like the "over-bullet" event structure; but note that the contents are "item-number" instead of "item-bullet", and note that they will have a "number" attribute, which some formatters/processors may ignore (since, for example, there's no need for it in HTML when producing an "<UL><LI>...</LI>...</UL>" structure), but which any processor may use.

Note that the values for the number attributes of "item-number" elements in a given "over-number" area will start at 1 and go up by one each time. If the Pod source doesn't follow that order (even though it really should should!), whatever numbers it has will be ignored (with the correct values being put in the number attributes), and an error message might be issued to the user.

events with an element_name of over-text

These events are are somewhat unlike the other over-* structures, as far as what their contents are. When an "=over ... =back" block is parsed where the items are a list of text "subheadings", it will produce this event structure:

<over-text indent="4" start_line="543">
  <item-text>
    ...stuff...
  </item-text>
  ...stuff (generally Para or Verbatim elements)...
  <item-text>
  ...more item-text and/or stuff...
</over-text>

The indent attribute is as with the other over-* events.

For example, this Pod source:

=over

=item Foo

Stuff

=item Bar I<baz>!

Quux

=back

produces this event structure:

<over-text indent="4" start_line="20">
  <item-text start_line="22">
    Foo
  </item-text>
  <Para start_line="24">
    Stuff
  </Para>
  <item-text start_line="26">
    Bar
      <I>
        baz
      </I>
    !
  </item-text>
  <Para start_line="28">
    Quux
  </Para>
</over-text>

events with an element_name of over-block

These events are are somewhat unlike the other over-* structures, as far as what their contents are. When an "=over ... =back" block is parsed where there are no items, it will produce this event structure:

<over-block indent="4" start_line="543">
  ...stuff (generally Para or Verbatim elements)...
</over-block>

The indent attribute is as with the other over-* events.

For example, this Pod source:

=over

For cutting off our trade with all parts of the world

For transporting us beyond seas to be tried for pretended offenses

He is at this time transporting large armies of foreign mercenaries to
complete the works of death, desolation and tyranny, already begun with
circumstances of cruelty and perfidy scarcely paralleled in the most
barbarous ages, and totally unworthy the head of a civilized nation.

=cut

will produce this event structure:

<over-block indent="4" start_line="2">
  <Para start_line="4">
    For cutting off our trade with all parts of the world
  </Para>
  <Para start_line="6">
    For transporting us beyond seas to be tried for pretended offenses
  </Para>
  <Para start_line="8">
    He is at this time transporting large armies of [...more text...]
  </Para>
</over-block>

events with an element_name of item-bullet

See "events with an element_name of over-bullet", above.

events with an element_name of item-number

See "events with an element_name of over-number", above.

events with an element_name of item-text

See "events with an element_name of over-text", above.

events with an element_name of for

TODO...

events with an element_name of Data

TODO...

More Pod::Simple Methods

Pod::Simple provides a lot of methods that aren't generally interesting to the end user of an existing Pod formatter, but some of which you might find useful in writing a Pod formatter. They are listed below. The first several methods (the accept_* methods) are for declaring the capabilites of your parser, notably what =for targetname sections it's interested in, what extra N<...> codes it accepts beyond the ones described in the perlpod.

$parser->accept_targets( SOMEVALUE )

As the parser sees sections like:

=for html  <img src="fig1.jpg">

=begin html

  <img src="fig1.jpg">

=end html

...the parser will ignore these sections unless your subclass has specified that it wants to see sections targetted to "html" (or whatever the formatter name is).

If you want to process all sections, even if they're not targetted for you, call this before you start parsing:

$parser->accept_targets('*');

$parser->accept_targets_as_text( SOMEVALUE )

This is like accept_targets, except that it specifies also that the content of sections for this target should be treated as Pod text even if the target name in "=for targetname" doesn't start with a ":".

At time of writing, I don't think you'll need to use this.

$parser->accept_codes( Codename, Codename... )

This tells the parser that you accept additional formatting codes, beyond just the standard ones (I B C L F S X, plus the two weird ones you don't actually see in the parse tree, Z and E). For example, to also accept codes "N", "R", and "W":

$parser->accept_codes( qw( N R W ) );

TODO: document how this interacts with =extend, and long element names

$parser->accept_directive_as_data( directive_name )

$parser->accept_directive_as_verbatim( directive_name )

$parser->accept_directive_as_processed( directive_name )

In the unlikely situation that you need to tell the parser that you will accept additional directives ("=foo" things), you need to first set the parset to treat its content as data (i.e., not really processed at all), or as verbatim (mostly just expanding tabs), or as processed text (parsing formatting codes like B<...>).

For example, to accept a new directive "=method", you'd presumably use:

$parser->accept_directive_as_processed("method");

so that you could have Pod lines like:

=method I<$whatever> thing B<um>

Making up your own directives breaks compatibility with other Pod formatters, in a way that using "=for target ..." lines doesn't; however, you may find this useful if you're making a Pod superset format where you don't need to worry about compatibility.

$parser->nbsp_for_S(VALUE);

Setting this attribute to a true value (and by default it is false) will take "S<...>" sequences to sequences of words separated by \xA0 (non-breaking space) characters. For example, it will take this:

I like S<Dutch apple pie>, don't you?

and treat it as if it were:

I like DutchE<nbsp>appleE<nbsp>pie, don't you?

This is handy for output formats that don't have anything quite like an "S<...>" code, but which do have a code for non-breaking space.

There is currently no method for going the other way; but I can probably provide one upon request.

$parser->version_report()

This returns a string reporting the $VERSION value from your module (and its classname) as well as the $VERSION value of Pod::Simple. Note that perlpodspec requires output formats to (wherever possible) note this detail in a comment in the output format. For example, for some kind of SGML output format:

print OUT "<!-- \n", $parser->version_report, "\n -->";

$parser->pod_para_count()

This returns the count of Pod paragraphs seen so far.

$parser->line_count()

This is the current line number being parsed. But you might find the "line_number" event attribute more accurate, when it is present.

$parser->nix_X_codes( SOMEVALUE )

This attribute, when set to a true value (and it is false by default) ignores any "X<...>" sequences in the document being parsed. Many formats don't actually use the content of these codes, so have no reason to process them.

$parser->merge_text( SOMEVALUE )

This attribute, when set to a true value (and it is false by default) makes sure that only one event (or token, or node) will be created for any single contiguous sequence of text. For example, consider this somewhat contrived example:

I just LOVE Z<>hotE<32>apple pie!

When that is parsed and events are about to be called on it, it may actually seem to be four different text events, one right after another: one event for "I just LOVE ", one for "hot", one for " ", and one for "apple pie!". But if you have merge_text on, then you're guaranteed that it will be fired as one text event: "I just LOVE hot apple pie!".

$parser->code_handler( CODE_REF )

This specifies code that should be called when a code line is seen (i.e., a line outside of the Pod). Normally this is undef, meaning that no code should be called. If you provide a routine, it should start out like this:

sub get_code_line {  # or whatever you'll call it
  my($line, $line_number, $parser) = @_;
  ...
}

Note, however, that sometimes the Pod events aren't processed in exactly the same order as the code lines are -- i.e., if you have a file with Pod, then code, then more Pod, sometimes the code will be processed (via whatever you have code_handler call) before the all of the preceding Pod has been processed.

$parser->cut_handler( CODE_REF )

This is just like the code_handler attribute, except that it's for "=cut" lines, not code lines. The same caveats apply. "=cut" lines are unlikely to be interesting, but this is included for completeness.

$parser->whine( linenumber, complaint string )

This notes a problem in the Pod, which will be reported to in the "Pod Errors" section of the document and/or send to STDERR, depending on the values of the attributes no_whining, no_errata_section, and complain_stderr.

$parser->scream( linenumber, complaint string )

This notes an error like whine does, except that it is not suppressable with no_whining. This should be used only for very serious errors.

$parser->source_dead(1)

This aborts parsing of the current document, by switching on the flag that indicates that EOF has been seen. In particularly drastic cases, you might want to do this. It's rather nicer than just calling die!

$parser->hide_line_numbers( SOMEVALUE )

Some subclasses that indescriminately dump event attributes (well, except for ones beginning with "~") can use this object attribute for refraining to dump the "start_line" attribute.

$parser->no_whining( SOMEVALUE )

This attribute, if set to true, will suppress reports of non-fatal error messages. The default value is false, meaning that complaints are reported. How they get reported depends on the values of the attributes no_errata_section and complain_stderr.

$parser->no_errata_section( SOMEVALUE )

This attribute, if set to true, will suppress generation of an errata section. The default value is false -- i.e., an errata section will be generated.

$parser->complain_stderr( SOMEVALUE )

This attribute, if set to true will send complaints to STDERR. The default value is false -- i.e., complaints do not go to STDERR.

$parser->bare_output( SOMEVALUE )

Some formatter subclasses use this as a flag for whether output should have prologue and epilogue code omitted. For example, setting this to true for an HTML formatter class should omit the "<html><head><title>...</title><body>..." prologue and the "</body></html>" epilogue.

If you want to set this to true, you should probably also set no_whining or at least no_errata_section to true.

COPYRIGHT AND DISCLAIMERS

This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

This program is distributed in the hope that it will be useful, but without any warranty; without even the implied warranty of merchantability or fitness for a particular purpose.

AUTHOR

Sean M. Burke sburke@cpan.org

To install Ruby, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Ruby

CPAN shell

perl -MCPAN -e shell
install Ruby

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

SYNOPSIS

DESCRIPTION

Events

More Pod::Simple Methods

SEE ALSO

COPYRIGHT AND DISCLAIMERS

AUTHOR

Module Install Instructions