NAME
Acme::Tools - Lots of more or less useful subs lumped together and exported into your namespace
SYNOPSIS
use Acme::Tools;
print sum(1,2,3); # 6
print avg(2,3,4,6); # 3.75
my @list = minus(\@listA, \@listB); # set operations
my @list = union(\@listA, \@listB); # set operations
print length(gzip("abc" x 1000)); # far less than 3000
writefile("/dir/filename",$string); # convenient
my $s=readfile("/dir/filename"); # also conventient
print "yes!" if between($pi,3,4);
print percentile(0.05, @numbers);
my @even = range(1000,2000,2); # even numbers between 1000 and 2000
my @odd = range(1001,2001,2);
my $dice = random(1,6);
my $color = random(['red','green','blue','yellow','orange']);
...and so on.ABSTRACT
About 120 more or less useful perl subroutines lumped together and exported into your namespace.
DESCRIPTION
Subs created and collected since the mid-90s.
INSTALLATION
sudo cpan Acme::Toolsor maybe better:
sudo apt-get install cpanminus make # for Ubuntu 12.04
sudo cpanm Acme::ToolsEXPORT
Almost every sub, about 90 of them.
Beware of namespace pollution. But what did you expect from an Acme module?
NUMBERS
num2code
See "code2num"
code2num
num2code() convert numbers (integers) from the normal decimal system to some arbitrary other number system. That can be binary (2), oct (8), hex (16) or others.
Example:
print num2code(255,2,"0123456789ABCDEF"); # prints FF
print num2code( 14,2,"0123456789ABCDEF"); # prints 0E...because 255 are converted to hex FF (base length("0123456789ABCDEF") ) which is 2 digits of 0-9 or A-F. ...and 14 are converted to 0E, with leading 0 because of the second argument 2.
Example:
print num2code(1234,16,"01")Prints the 16 binary digits 0000010011010010 which is 1234 converted to binary zeros and ones.
To convert back:
print code2num("0000010011010010","01"); #prints 1234num2code() can be used to compress numeric IDs to something shorter:
$chars="0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz-_";
print num2code("241274432",5,$chars); # prints EOOv0
print code2num("EOOv0",$chars); # prints 241274432gcd
"The Euclidean algorithm (also called Euclid's algorithm) is an algorithm to determine the greatest common divisor (gcd) of two integers. It is one of the oldest algorithms known, since it appeared in the classic Euclid's Elements around 300 BC. The algorithm does not require factoring."
Input: two or more positive numbers (integers, without decimals that is)
Output: an integer
Example:
print gcd(12, 8); # prints 4Because the (prime number) factors of 12 is 2 * 2 * 3 and the factors of 8 is 2 * 2 * 2 and the common ('overlapping') factors for both 12 and 8 is then 2 * 2 and the result becomes 4.
Example two:
print gcd(90, 135, 315); # prints 45
print gcd(2*3*3*5, 3*3*3*5, 3*3*5*7); # prints 45 ( = 3*3*5 which is common to all three args)Implementation:
sub gcd { my($a,$b,@r)=@_; @r ? gcd($a,gcd($b,@r)) : $b==0 ? $a : gcd($b, $a % $b) }http://en.wikipedia.org/wiki/Greatest_common_divisor
http://en.wikipedia.org/wiki/Euclidean_algorithm
lcm
lcm() finds the Least Common Multiple of two or more numbers (integers).
Input: two or more positive numbers (integers)
Output: an integer number
Example: 2/21 + 1/6 = 4/42 + 7/42 = 11/42
Where 42 = lcm(21,6).
Example:
print lcm(45,120,75); # prints 1800Because the factors are:
45 = 2^0 * 3^2 * 5^1
120 = 2^3 * 3^1 * 5^1
75 = 2^0 * 3^1 * 5^2Take the bigest power of each primary number (2, 3 and 5 here). Which is 2^3, 3^2 and 5^2. Multiplied this is 8 * 9 * 25 = 1800.
sub lcm { my($a,$b,@r)=@_; @r ? lcm($a,lcm($b,@r)) : $a*$b/gcd($a,$b) }Seems to works with Math::BigInt as well: (lcm of all integers from 1 to 200)
perl -MAcme::Tools -MMath::BigInt -le'print lcm(map Math::BigInt->new($_),1..200)'
337293588832926264639465766794841407432394382785157234228847021917234018060677390066992000resolve
Resolves an equation by Newtons method.
Input: 1-6 arguments. At least one argument.
First argument: must be a coderef to a subroutine (a function)
Second argument: if present, the target, f(x)=target. Default 0.
Third argument: a start position for x. Default 0.
Fourth argument: a small delta value. Default 1e-4 (0.0001).
Fifth argument: a maximum number of iterations before resolve gives up and carps. Default 100 (if fifth argument is not given or is undef). The number 0 means infinite here. If the derivative of the start position is zero or close to zero more iterations are typically needed.
Sixth argument: A number of seconds to run before giving up. If both fifth and sixth argument is given and > 0, resolve stops at whichever comes first.
Output: returns the number x for f(x) = 0
...or equal to the second input argument if present.
Example:
The equation x^2 - 4x - 21 = 0 has two solutions: -3 and 7.
The result of resolve will depend on the start position:
print resolve { $_**2 - 4*$_ - 21 }; # -3 with $_ as your x
print resolve(sub{ my $x=shift; $x**2 - 4*$x - 21 }); # -3 more elaborate call
print resolve(sub{ my $x=shift; $x**2 - 4*$x - 21 },0,3); # 7 with start position 3
print "Iterations: $Acme::Tools::Resolve_iterations\n"; # 3 or larger, about 10-15 is normalThe variable $Acme::Tools::Resolve_iterations (which is exported) will be set to the last number of iterations resolve used. Work also if resolve dies (carps).
The variable $Acme::Tools::Resolve_last_estimate (which is exported) will be set to the last estimate. This number will often be close to the solution and can be used even if resolve dies (carps).
BigFloat-example:
If either second, third or fourth argument is an instance of Math::BigFloat, so will the result be:
use Acme::Tools;
my $equation = sub{ $_ - 1 - 1/$_ };
my $gr1 = resolve( $equation, 0, 1 ); #
my $gr2 = resolve( $equation, 0, bigf(1) ); # 1/2 + sqrt(5)/2
bigscale(50);
my $gr3 = resolve( $equation, 0, bigf(1) ); # 1/2 + sqrt(5)/2
print 1/2 + sqrt(5)/2, "\n";
print "Golden ratio 1: $gr1\n";
print "Golden ratio 2: $gr2\n";
print "Golden ratio 3: $gr3\n";Output:
1.61803398874989
Golden ratio 1: 1.61803398874989
Golden ratio 2: 1.61803398874989484820458683436563811772029300310882395927211731893236137472439025
Golden ratio 3: 1.6180339887498948482045868343656381177203091798057610016490334024184302360920167724737807104860909804See:
http://en.wikipedia.org/wiki/Newtons_method
http://en.wikipedia.org/wiki/Golden_ratio
TODO: fix fail for div by 0, e.g.: perl -MAcme::Tools -le'for(map$_/10,-4..20){printf"%9.4f %s\n",$_,3*$_+$_**4-12}print resolve(sub{$x=shift;3*$x+$x**4-12},0,1)' resolve(sub{ my $x=shift; $x**2 - 4*$x - 21 },undef,1.9) resolve_equation "x + 13*(3-x) = 17 - 1/x"
resolve_equation
This prints 2:
print resolve_equation "x + 13*(3-x) = 17 - x"A string containing at least one x is converted into a perl function. Then x is found by using resolve. The string conversion is done by replacing every x with $_ and if a = char is present it converts leftside = rightside into (leftside) - (rightside) = 0 which is the default behaviour of resolve.
conv
Converts between: * units of measurement * number systems * currencies
Examples:
print conv( 2000, "meters", "miles" ); #prints 1.24274238447467
print conv( 2.1, 'km', 'm'); #prints 2100
print conv( 70,"cm","in"); #prints 27.5590551181102
print conv( 4,"USD","EUR"); #prints 3.20481552905431 (depending on todays rates)
print conv( 4000,"b","kb"); #prints 3.90625 (1 kb = 1024 bytes)
print conv( 4000,"b","Kb"); #prints 3.90625 (1 Kb = 1000 bytes)
print conv( 1000,"mb","kb"); #prints 1024000
print conv( 101010,"bin","roman"); #prints XLII
print conv( "DCCXLII","roman","oct"); #prints 1346Units, types of measurement and currencies supported by conv are:
Note: units starting with the symbol _ means that all metric prefixes from yocto 10^-24 to yotta 10^+24 is supported, so _m means km, mm, cm, µm and so on. And _N means kN, MN GN and so on.
Note2: Many units have synonyms: m, meter, meters ...
acceleration: g, g0, m/s2, mps2
angle: binary_degree, binary_radian, brad, deg, degree, degrees,
gon, grad, grade, gradian, gradians, hexacontade, hour,
new_degree, nygrad, point, quadrant, rad, radian, radians,
sextant, turn
area: a, ar, are, ares, bunder, ca, centiare, cho, cm2,
daa, decare, decares, deciare, dekar,
djerib, m2, dunam, dönüm, earths, feddan, ft2, gongqing, ha
ha, hectare, hectares, hektar, jerib, km2, m2, manzana,
mi2, mm2, mu, qing, rai, sotka,
sqcm, sqft, sqkm, sqm, sqmi, sqmm
stremmata, um2, µm2
bytes: Eb, Gb, Kb, KiB, Mb, Pb, Tb, Yb, Zb, b, byte,
kb, kilobyte, mb, megabyte,
gb, gigabyte, tb, terabyte,
pb, petabyte, eb, exabyte,
zb, zettabyte, yb, yottabyte
charge: As, C, _e, coulomb, e
current: A, _A, N/m2
energy: BTU, Btu, J, Nm, W/s, Wh, Wps, Ws, _J, _eV,
cal, calorie, calories, eV, electronvolt,
erg, ergs, foot-pound, foot-pounds, ftlb, joule, kWh,
kcal, kilocalorie, kilocalories,
newtonmeter, newtonmeters, th, thermie
force: N, _N, dyn, dyne, dynes, lb, newton
length: NM, _m, _pc, astronomical unit, au, chain, ft, furlong,
in, inch, inches, km, league, lightyear, ls, ly,
m, meter, meters, mi, mil, mile, miles,
nautical mile, nautical miles, nmi,
parsec, pc, planck, yard, yard_imperical, yd, Å, ångstrøm
mass: Da, _eV, _g, bag, carat, ct, dwt, eV, electronvolt, g,
grain, grains, gram, grams, kilo, kilos, kt, lb, lb_av,
lb_t, lb_troy, lbs, ounce, ounce_av, ounce_troy, oz, oz_av, oz_t,
pennyweight, pound, pound_av, pound_metric, pound_troy, pounds,
pwt, seer, sl, slug, solar mass, st, stone, t, tonn, tonne, tonnes, u, wey
milage: mpg, l/100km, l/km, l/10km, lp10km, l/mil, liter_pr_100km, liter_pr_km, lp100km
money: AED, ARS, AUD, BGN, BHD, BND, BRL, BWP, CAD, CHF, CLP,
CNY, COP, CZK, DKK, EUR, GBP, HKD, HRK, HUF, IDR, ILS,
INR, IRR, ISK, JPY, KRW, KWD, KZT, LKR, LTL, LVL, LYD,
MUR, MXN, MYR, NOK, NPR, NZD, OMR, PHP, PKR, PLN, QAR,
RON, RUB, SAR, SEK, SGD, THB, TRY, TTD, TWD, USD, VEF, ZAR,
BTC, LTC
Currency rates are automatically updated from net
if +24h since last (on linux/cygwin).
numbers: des, hex, bin, oct, roman, dozen, doz, dz, gross, gr, gro,
great_gross, small_gross
(not supported: desimal numbers)
power: BTU, BTU/h, BTU/s, BTUph, GWhpy, J/s, Jps, MWhpy, TWhpy,
W, Whpy, _W, ftlb/min, ftlb/s, hk, hp, kWh/yr, kWhpy
pressure: N/m2, Pa, _Pa, at, atm, bar, mbar, pascal, psi, torr
radioactivity: Bq, becquerel, curie
speed: _m/s, c, fps, ft/s, ftps, km/h, km/t, kmh, kmph, kmt,
kn, knot, knots, kt, m/s, mach, machs, mi/h, mph, mps
temperature: C, F, K, celsius, fahrenheit, kelvin
time: _s, biennium, century, d, day, days, decade, dy, fortnight,
h, hour, hours, hr, indiction, jubilee, ke, lustrum, m,
millennium, min, minute, minutes, mo, moment, mon, month,
olympiad, quarter, s, season, sec, second, seconds, shake,
tp, triennium, w, week, weeks, y, y365, ySI, ycommon,
year, years, ygregorian, yjulian, ysideral, ytropical
volume: l, L, _L, _l, cm3, m3, floz, ft3, in3,
gal, gallon, gallon_imp, gallon_uk, gallon_us, gallons,
liter, liters, litre, litres,
pint, pint_imp, pint_uk, pint_us,
tablespoon, teaspoon, therm, thm, tspSee: http://en.wikipedia.org/wiki/Units_of_measurement
bytes_readable
Input: a number
Output:
the number with a B behind if the number is less than 1000
the number divided by 1024 with two decimals and "kB" behind if the number is less than 1024*1000
the number divided by 1048576 with two decimals and "MB" behind if the number is less than 1024*1024*1000
the number divided by 1073741824 with two decimals and "GB" behind if the number is less than 1024*1024*1024*1000
the number divided by 1099511627776 with two decimals and "TB" behind otherwise
Examples:
print bytes_readable(999); # 999 B
print bytes_readable(1000); # 1000 B
print bytes_readable(1001); # 0.98 kB
print bytes_readable(1024); # 1.00 kB
print bytes_readable(1153433.6); # 1.10 MB
print bytes_readable(1181116006.4); # 1.10 GB
print bytes_readable(1209462790553.6); # 1.10 TB
print bytes_readable(1088516511498.24*1000); # 990.00 TBint2roman
Converts integers to roman numbers.
Examples:
print int2roman(1234); # prints MCCXXXIV
print int2roman(1971); # prints MCMLXXI(Adapted subroutine from Peter J. Acklam, jacklam(&)math.uio.no)
I = 1
V = 5
X = 10
L = 50
C = 100 (centum)
D = 500
M = 1000 (mille)See also Roman.
See http://en.wikipedia.org/wiki/Roman_numbers for more.
roman2int
roman2int("MCMLXXI") == 1971distance
Input: the four decimal numbers of latutude1, longitude1, latitude2, longitude2
Output: the air distance in meters from point1 to point2.
Calculation is done using the Haversine Formula for spherical distance:
a = sin((lat2-lat1)/2)^2
+ sin((lon2-lon1)/2)^2 * cos(lat1) * cos(lat2);
c = 2 * atan2(min(1,sqrt(a)),
min(1,sqrt(1-a)))
distance = c * RWith earth radius set to:
R = Re - (Re-Rp) * sin(abs(lat1+lat2)/2)Where Re = 6378137.0 (equatorial radius) and Rp = 6356752.3 (polar radius).
Example:
my @oslo = ( 59.93937, 10.75135); # oslo in norway
my @rio = (-22.97673, -43.19508); # rio in brazil
printf "%.1f km\n", distance(@oslo,@rio)/1000; # 10431.7 km
printf "%.1f km\n", distance(@rio,@oslo)/1000; # 10431.7 km
printf "%.1f nmi\n", distance(@oslo,@rio)/1852.000; # 5632.7 nmi (nautical miles)
printf "%.1f miles\n",distance(@oslo,@rio)/1609.344; # 6481.9 miles
printf "%.1f miles\n",conv(distance(@oslo,@rio),"meters","miles");# 6481.9 milesSee http://www.faqs.org/faqs/geography/infosystems-faq/
and http://mathforum.org/library/drmath/view/51879.html
and http://en.wikipedia.org/wiki/Earth_radius
and Geo::Direction::Distance, but Acme::Tools::distance() is about 8 times faster.
big
bigi
bigf
bigr
bigscale
big, bigi, bigf, bigr and bigscale are just convenient shorthands for using Math::BigInt->new(), Math::BigFloat->new() and Math::BigRat-new() preferably with the GMP for faster calculations. Use those modules instead of the real deal. Examples:
my $num1 = big(3); #returns a new Math::BigInt-object
my $num2 = big('3.0'); #returns a new Math::BigFloat-object
my $num3 = big(3.0); #returns a new Math::BigInt-object
my $num4 = big(3.1); #returns a new Math::BigFloat-object
my $num5 = big('2/7'); #returns a new Math::BigRat-object
my($i1,$f1,$i2,$f2) = big(3,'3.0',3.0,3.1); #returns the four new numbers, as the above four lines
#uses wantarray
print 2**200; # 1.60693804425899e+60
print big(2)**200; # 1606938044258990275541962092341162602522202993782792835301376
print 2**big(200); # 1606938044258990275541962092341162602522202993782792835301376
print big(2**200); # 1606938044258990000000000000000000000000000000000000000000000
print 1/7; # 0.142857142857143
print 1/big(7); # 0 because of integer arithmetics
print 1/big(7.0); # 0 because 7.0 is viewed as an integer
print 1/big('7.0'); # 0.1428571428571428571428571428571428571429
print 1/bigf(7); # 0.1428571428571428571428571428571428571429
print bigf(1/7); # 0.142857142857143 probably not what you wanted
print 1/bigf(7); # 0.1428571428571428571428571428571428571429
bigscale(80); # for increased precesion (default is 40)
print 1/bigf(7); # 0.14285714285714285714285714285714285714285714285714285714285714285714285714285714In big() the characters . and / will make it return a Math::BigFloat- and Math::BigRat-object accordingly. Or else a Math::BigInt-object is returned.
Instead of guessing, use bigi, bigf and bigr to return what you want.
Note: Acme::Tools does not depend on Math::BigInt and Math::BigFloat and GMP, but these four big*-subs do (by require). To use big, bigi, bigf and bigr effectively you should install Math::BigInt::GMP and Math::BigFloat::GMP like this:
sudo cpanm Math::BigFloat Math::GMP Math::BingInt::GMP # or
sudo cpan Math::BigFloat Math::GMP Math::BingInt::GMP # or
sudo yum install perl-Math-BigInt-GMP perl-Math-GMP # on RedHat, RHEL or
sudo apt-get install libmath-bigint-gmp-perl libmath-gmp-perl # on Ubuntu or some other wayUnless GMP is installed for perl like this, the Math::Big*-modules will fall back to using similar but slower built in modules. See: https://gmplib.org/
isnum
Input: String to be tested on regexp /^ \s* [\-\+]? (?: \d*\.\d+ | \d+ ) (?:[eE][\-\+]?\d+)?\s*$/x. If no argument is given isnum checks $_.
Output: True or false (1 or 0)
STRINGS
upper
Returns input string as uppercase.
Can be used if perls build in uc() for some reason does not convert æøå and other letters outsize a-z.
æøåäëïöüÿâêîôûãõàèìòùáéíóúýñð => ÆØÅÄËÏÖÜ?ÂÊÎÔÛÃÕÀÈÌÒÙÁÉÍÓÚÝÑÐ
See also perldoc -f uc and perldoc -f lc
lower
Same as "upper", only lower...
trim
Removes space from the beginning and end of a string. Whitespace (\s) that is. And removes any whitespace inside the string of more than one char, leaving the first whitespace char. Thus:
trim(" asdf \t\n 123 ") eq "asdf 123"
trim(" asdf\t\n 123\n") eq "asdf\t123"Works on $_ if no argument i given:
print join",", map trim, " please ", " remove ", " my ", " spaces "; # please,remove,my,spaces
print join",", trim(" please ", " remove ", " my ", " spaces "); # works on arrays as well
my $s=' please '; trim(\$s); # now $s eq 'please'
trim(\@untrimmedstrings); # trims array strings inplace
@untrimmedstrings = map trim, @untrimmedstrings; # same, works on $_
trim(\$_) for @untrimmedstrings; # same, works on \$_lpad
rpad
Left or right pads a string to the given length by adding one or more spaces at the end for rpad or at the start for lpad.
Input: First argument: string to be padded. Second argument: length of the output. Optional third argument: character(s) used to pad. Default is space.
rpad('gomle',9); # 'gomle '
lpad('gomle',9); # ' gomle'
rpad('gomle',9,'-'); # 'gomle----'
lpad('gomle',9,'+'); # '++++gomle'
rpad('gomle',4); # 'goml'
lpad('gomle',4); # 'goml'
rpad('gomle',7,'xyz'); # 'gomlxy'
lpad('gomle',10,'xyz'); # 'xyzxygoml'cpad
Center pads. Pads the string both on left and right equal to the given length. Centers the string. Pads right side first.
cpad('mat',5) eq ' mat '
cpad('mat',4) eq 'mat '
cpad('mat',6) eq ' mat '
cpad('mat',9) eq ' mat '
cpad('mat',5,'+') eq '+mat+'
cpad('MMMM',20,'xyzXYZ') eq 'xyzXYZxyMMMMxyzXYZxy'trigram
Input: A string (i.e. a name). And an optional x (see example 2)
Output: A list of this strings trigrams (See examlpe)
Example 1:
print join ", ", trigram("Kjetil Skotheim");Prints:
Kje, jet, eti, til, il , l S, Sk, Sko, kot, oth, the, hei, eimExample 2:
Default is 3, but here 4 is used instead in the second optional input argument:
print join ", ", trigram("Kjetil Skotheim", 4);And this prints:
Kjet, jeti, etil, til , il S, l Sk, Sko, Skot, koth, othe, thei, heimtrigram() was created for "fuzzy" name searching. If you have a database of many names, addresses, phone numbers, customer numbers etc. You can use trigram() to search among all of those at the same time. If the search form only has one input field. One general search box.
Store all of the trigrams of the trigram-indexed input fields coupled with each person, and when you search, you take each trigram of you query string and adds the list of people that has that trigram. The search result should then be sorted so that the persons with most hits are listed first. Both the query strings and the indexed database fields should have a space added first and last before trigram()-ing them.
This search algorithm is not includes here yet...
trigram() should perhaps have been named ngram for obvious reasons.
sliding
Same as trigram (except there is no default width). Works also with arrayref instead of string.
Example:
sliding( ["Reven","rasker","over","isen"], 2 )Result:
( ['Reven','rasker'], ['rasker','over'], ['over','isen'] )chunks
Splits strings and arrays into chunks of given size:
my @a = chunks("Reven rasker over isen",7);
my @b = chunks([qw/Og gubben satt i kveldinga og koste seg med skillinga/], 3);Resulting arrays:
( 'Reven r', 'asker o', 'ver ise', 'n' )
( ['Og','gubben','satt'], ['i','kveldinga','og'], ['koste','seg','med'], ['skillinga'] )chars
chars("Tittentei"); # ('T','i','t','t','e','n','t','e','i')ARRAYS
min
Returns the smallest number in a list. Undef is ignored.
@lengths=(2,3,5,2,10,undef,5,4);
$shortest = min(@lengths); # returns 2Note: The comparison operator is perls <> which means empty strings is treated as 0, the number zero. The same goes for max(), except of course > is used instead.
min(3,4,5) # 3
min(3,4,5,undef) # 3
min(3,4,5,'') # returns the empty stringmax
Returns the largest number in a list. Undef is ignored.
@heights=(123,90,134,undef,132);
$highest = max(@heights); # 134mins
Just as "min", except for strings.
print min(2,7,10); # 2
print mins("2","7","10"); # 10
print mins(2,7,10); # 10maxs
Just as "mix", except for strings.
print max(2,7,10); # 10
print maxs("2","7","10"); # 7
print maxs(2,7,10); # 7zip
Input: Two or more arrayrefs. A number of equal sized arrays containing numbers, strings or anything really.
Output: An array of those input arrays zipped (interlocked, merged) into each other.
print join " ", zip( [1,3,5], [2,4,6] ); # 1 2 3 4 5 6
print join " ", zip( [1,4,7], [2,5,8], [3,6,9] ); # 1 2 3 4 5 6 7 8 9Example:
zip() creates a hash where the keys are found in the first array and values in the secord in the correct order:
my @media = qw/CD DVD VHS LP Blueray/;
my @count = qw/20 12 2 4 3/;
my %count = zip(\@media,\@count); # or zip( [@media], [@count] )
print "I got $count{DVD} DVDs\n"; # I got 12 DVDsDies (croaks) if the two lists are of different sizes
...or any input argument is not an array ref.
pushsort
Adds one or more element to a numerically sorted array and keeps it sorted.
pushsort @a, 13; # this...
push @a, 13; @a = sort {$a<=>$b} @a; # is the same as this, but the former is faster if @a is largepushsortstr
Same as pushsort except that the array is kept sorted alphanumerically (cmp) instead of numerically (<=>). See "pushsort".
pushsort @a, "abc"; # this...
push @a, "abc"; @a = sort @a; # is the same as this, but the former is faster if @a is largebinsearch
Returns the position of an element in a numerically sorted array. Returns undef if the element is not found.
Input: Two, three or four arguments
First argument: the element to find. Usually a number.
Second argument: a reference to the array to search in. The array should be sorted in ascending numerical order (se exceptions below).
Third argument: Optional. Default false.
If present, whether result not found should return undef or a fractional position.
If the third argument is false binsearcg returns undef if the element is not found.
If the third argument is true binsearch returns 0.5 plus closest position below the searched value.
Returns last position + 0.5 if the searched element is greater than all elements in the sorted array.
Returns -0.5 if the searched element is less than all elements in the sorted array.
Fourth argument: Optional. Default sub { $_[0] <=> $_[1] }.
If present, the fourth argument is a code-ref that alters the way binsearch compares two elements.
Example:
binsearch(10,[5,10,15,20]); # 1
binsearch(10,[20,15,10,5],undef,sub{$_[1]<=>$_[0]}); # 2 search arrays sorted numerically in opposite order
binsearch("c",["a","b","c","d"],undef,sub{$_[0]cmp$_[1]}); # 2 search arrays sorted alphanumerically
binsearchstr("b",["a","b","c","d"]); # 1 search arrays sorted alphanumericallybinsearchstr
Same as binsearch except that the arrays is sorted alphanumerically (cmp) instead of numerically (<=>) and the searched element is a string, not a number. See "binsearch".
rank
Input: Two or three arguments. N and an arrayref for the list to look at.
In scalar context: Returns the nth smallest number in an array. The array doesn't have to be sorted.
In array context: Returns the n smallest numbers in an array.
To return the n(th) largest number(s) instead of smallest, just negate n.
An optional third argument can be a sub that is used to compare the elements of the input array.
Examples:
my $second_smallest = rank(2, [11,12,13,14]); # 12
my @top10 = rank(-10, [1..100]); # 100, 99, 98, 97, 96, 95, 94, 93, 92, 91
my $max = rank(-1, [101,102,103,102,101]); #103
my @contest = ({name=>"Alice",score=>14},{name=>"Bob",score=>13},{name=>"Eve",score=>12});
my $second = rank(2, \@contest, sub{$_[1]{score}<=>$_[0]{score}})->{name}; #Bobrankstr
Just as rank but sorts alphanumerically (strings, cmp) instead of numerically.
eqarr
Input: Two or more references to arrays.
Output: True (1) or false (0) for whether or not the arrays are numerically and alphanumerically equal. Comparing each element in each array with both == and eq .
Examples:
eqarr([1,2,3],[1,2,3],[1,2,3]); # 1 (true)
eqarr([1,2,3],[1,2,3],[1,2,4]); # 0 (false)
eqarr([1,2,3],[1,2,3,4]); # undef (different size, false)
eqarr([1,2,3]); # croak (should be two or more arrays)
eqarr([1,2,3],1,2,3); # croak (not arraysrefs)sorted
Return true if the input array is numerically sorted.
@a=(1..10); print "array is sorted" if sorted @a; #trueOptionally the last argument can be a comparison sub:
@person=({Rank=>1,Name=>'Amy'}, {Rank=>2,Name=>'Paula'}, {Rank=>3,Name=>'Ruth'});
print "Persons are sorted" if sorted @person, sub{$_[0]{Rank}<=>$_[1]{Rank}};sortedstr
Return true if the input array is alphanumerically sorted.
@a=(1..10); print "array is sorted" if sortedstr @a; #false
@a=("01".."10"); print "array is sorted" if sortedstr @a; #truepart
Input: A code-ref and a list
Output: Two array-refs
Like grep but returns the false list as well. Partitions a list into two lists where each element goes into the first or second list whether the predicate (a code-ref) is true or false for that element.
my( $odd, $even ) = part {$_%2} (1..8);
print for @$odd; #prints 1 3 5 7
print for @$even; #prints 2 4 6 8(Works like partition() in the Scala programming language)
parth
Like part but returns any number of lists.
Input: A code-ref and a list
Output: A hash where the returned values from the code-ref are keys and the values are arrayrefs to the list elements which gave those keys.
my %hash = parth { uc(substr($_,0,1)) } ('These','are','the','words','of','this','array');
print serialize(\%hash);Result:
%hash = ( T=>['These','the','this'],
A=>['are','array'],
O=>['of'],
W=>['words'] )parta
Like <parth> but returns an array of lists.
my @a = parta { length } qw/These are the words of this array/;Result:
@a = ( undef, undef, ['of'], ['are','the'], ['this'], ['These','words','array'] )Two undefs at first (index positions 0 and 1) since there are no words of length 0 or 1 in the input array.
STATISTICS
sum
Returns the sum of a list of numbers. Undef is ignored.
print sum(1,3,undef,8); # 12
print sum(1..1000); # 500500
print sum(undef); # undefavg
Returns the average number of a list of numbers. That is sum / count
print avg( 2, 4, 9); # 5 (2+4+9) / 3 = 5
print avg( [2, 4, 9] ); # 5 pass by reference, same result but faster for large arraysAlso known as arithmetic mean.
Pass by reference: If one argument is given and it is a reference to an array, this array is taken as the list of numbers. This mode is about twice as fast for 10000 numbers or more. It most likely also saves memory.
geomavg
Returns the geometric average (a.k.a geometric mean) of a list of numbers.
print geomavg(10,100,1000,10000,100000); # 1000
print 0+ (10*100*1000*10000*100000) ** (1/5); # 1000 same thing
print exp(avg(map log($_),10,100,1000,10000,100000)); # 1000 same thing, this is how geomavg() works internallyharmonicavg
Returns the harmonic average (a.k.a geometric mean) of a list of numbers. http://en.wikipedia.org/wiki/Harmonic_mean
print harmonicavg(10,11,12); # 3 / ( 1/10 + 1/11 + 1/12) = 10.939226519337variance
variance = ( sum (x[i]-Average)**2)/(n-1)
stddev
Standard_Deviation = sqrt(variance)
Standard deviation (stddev) is a measurement of the width of a normal distribution where one stddev on each side of the mean covers 68% and two stddevs 95%. Normal distributions are sometimes called Gauss curves or Bell shapes. https://en.wikipedia.org/wiki/Standard_deviation
stddev(4,5,6,5,6,4,3,5,5,6,7,6,5,7,5,6,4) # = 1.0914103126635
avg(@testscores) + stddev(@testscores) # = the score for IQ = 115 (by one definition)
avg(@testscores) - stddev(@testscores) # = the score for IQ = 85median
Returns the median value of a list of numbers. The list do not have to be sorted.
Example 1, list having an odd number of numbers:
print median(1, 100, 101); # 100100 is the middlemost number after sorting.
Example 2, an even number of numbers:
print median(1005, 100, 101, 99); # 100.5100.5 is the average of the two middlemost numbers.
percentile
Returns one or more percentiles of a list of numbers.
Percentile 50 is the same as the median, percentile 25 is the first quartile, 75 is the third quartile.
Input:
First argument is your wanted percentile, or a refrence to a list of percentiles you want from the dataset.
If the first argument to percentile() is a scalar, this percentile is returned.
If the first argument is a reference to an array, then all those percentiles are returned as an array.
Second, third, fourth and so on argument are the numbers from which you want to find the percentile(s).
Examples:
This finds the 50-percentile (the median) to the four numbers 1, 2, 3 and 4:
print "Median = " . percentile(50, 1,2,3,4); # 2.5This:
@data=(11, 5, 3, 5, 7, 3, 1, 17, 4, 2, 6, 4, 12, 9, 0, 5);
@p = map percentile($_,@data), (25, 50, 75);Is the same as this:
@p = percentile([25, 50, 75], @data);But the latter is faster, especially if @data is large since it sorts the numbers only once internally.
Example:
Data: 1, 4, 6, 7, 8, 9, 22, 24, 39, 49, 555, 992
Average (or mean) is 143
Median is 15.5 (which is the average of 9 and 22 who both equally lays in the middle)
The 25-percentile is 6.25 which are between 6 and 7, but closer to 6.
The 75-percentile is 46.5, which are between 39 and 49 but close to 49.
Linear interpolation is used to find the 25- and 75-percentile and any other x-percentile which doesn't fall exactly on one of the numbers in the set.
Interpolation:
As you saw, 6.25 are closer to 6 than to 7 because 25% along the set of the twelve numbers is closer to the third number (6) than to he fourth (7). The median (50-percentile) is also really interpolated, but it is always in the middle of the two center numbers if there are an even count of numbers.
However, there is two methods of interpolation:
Example, we have only three numbers: 5, 6 and 7.
Method 1: The most common is to say that 5 and 7 lays on the 25- and 75-percentile. This method is used in Acme::Tools.
Method 2: In Oracle databases the least and greatest numbers always lay on the 0- and 100-percentile.
As an argument on why Oracles (and others?) definition is not the best way is to look at your data as for instance temperature measurements. If you place the highest temperature on the 100-percentile you are sort of saying that there can never be a higher temperatures in future measurements.
A quick non-exhaustive Google survey suggests that method 1 here is most used.
The larger the data sets, the less difference there is between the two methods.
Extrapolation:
In method one, when you want a percentile outside of any possible interpolation, you use the smallest and second smallest to extrapolate from. For instance in the data set 5, 6, 7, if you want an x-percentile of x < 25, this is below 5.
If you feel tempted to go below 0 or above 100, percentile() will die (or croak to be more precise)
Another method could be to use "soft curves" instead of "straight lines" in interpolation. Maybe B-splines or Bezier curves. This is not used here.
For large sets of data Hoares algorithm would be faster than the simple straightforward implementation used in percentile() here. Hoares don't sort all the numbers fully.
Differences between the two main methods described above:
Data: 1, 4, 6, 7, 8, 9, 22, 24, 39, 49, 555, 992
Percentile Method 1 Method 2
(Acme::Tools::percentile (Oracle)
and others)
----------- --------------------------- ---------
0 -2 1
1 -1.61 1.33
25 6.25 6.75
50 (median) 15.5 15.5
75 46.5 41.5
99 1372.19 943.93
100 1429 992Found like this:
perl -MAcme::Tools -le 'print for percentile([0,1,25,50,75,99,100], 1,4,6,7,8,9,22,24,39,49,555,992)'And like this in Oracle-databases:
create table tmp (n number);
insert into tmp values (1); insert into tmp values (4); insert into tmp values (6);
insert into tmp values (7); insert into tmp values (8); insert into tmp values (9);
insert into tmp values (22); insert into tmp values (24); insert into tmp values (39);
insert into tmp values (49); insert into tmp values (555); insert into tmp values (992);
select
percentile_cont(0.00) within group(order by n) per0,
percentile_cont(0.01) within group(order by n) per1,
percentile_cont(0.25) within group(order by n) per25,
percentile_cont(0.50) within group(order by n) per50,
percentile_cont(0.75) within group(order by n) per75,
percentile_cont(0.99) within group(order by n) per99,
percentile_cont(1.00) within group(order by n) per100
from tmp;(Oracle also provides a similar function: percentile_disc where disc is short for discrete, meaning no interpolation is taking place. Instead the closest number from the data set is picked.)
RANDOM
random
Input: One or two arguments.
Output:
If two integer arguments: returns a random integer between the integers in argument one and two.
If the first argument is an arrayref: returns a random member of that array without changing the array.
If the first argument is an arrayref and there is a second arg: return that many random members of that array
If the first argument is an hashref and there is no second arg: return a random key weighted by the values of that hash
If the first argument is an hashref and there is a second arg: return that many random keys weighted by the values of that hash
If there is no second argument and the first is an integer, a random integer between 0 and that number is returned. Including 0 and the number itself.
Examples:
$dice=random(1,6); # 1, 2, 3, 4, 5 or 6
$dice=random([1..6]); # same as previous
@dice=random([1..6],10); # 10 dice tosses
$dice=random({1=>1, 2=>1, 3=>1, 4=>1, 5=>1, 6=>2}); # weighted dice with 6 being twice as likely as the others
@dice=random({1=>1, 2=>1, 3=>1, 4=>1, 5=>1, 6=>2},10); # 10 weighted dice tosses
print random({head=>0.4999,tail=>0.4999,edge=>0.0002}); # coin toss (sum 1 here but not required to be)
print random(2); # prints 0, 1 or 2
print 2**random(7); # prints 1, 2, 4, 8, 16, 32, 64 or 128
@dice=map random([1..6]), 1..10; # as third example above, but much slower
perl -MAcme::Tools -le 'print for random({head=>0.499,tail=>0.499,edge=>0.002},10000);' | sort | uniq -crandom_gauss
Returns an pseudo-random number with a Gaussian distribution instead of the uniform distribution of perls rand() or random() in this module. The algorithm is a variation of the one at http://www.taygeta.com/random/gaussian.html which is both faster and better than adding a long series of rand().
Uses perls rand function internally.
Input: 0 - 3 arguments.
First argument: the average of the distribution. Default 0.
Second argument: the standard deviation of the distribution. Default 1.
Third argument: If a third argument is present, random_gauss returns an array of that many pseudo-random numbers. If there is no third argument, a number (a scalar) is returned.
Output: One or more pseudo-random numbers with a Gaussian distribution. Also known as a Bell curve or Normal distribution.
Example:
my @I=random_gauss(100, 15, 100000); # produces 100000 pseudo-random numbers, average=100, stddev=15
#my @I=map random_gauss(100, 15), 1..100000; # same but more than three times slower
print "Average is: ".avg(@I)."\n"; # prints a number close to 100
print "Stddev is: ".stddev(@I)."\n"; # prints a number close to 15
my @M=grep $_>100+15*2, @I; # those above 130
print "Percent above two stddevs: ".(100*@M/@I)."%\n"; #prints a number close to 2.2%Example 2:
my $num=1e6;
my @h; $h[$_/2]++ for random_gauss(100,15, $num);
$h[$_] and printf "%3d - %3d %6d %s\n",
$_*2,$_*2+1,$h[$_],'=' x ($h[$_]*1000/$num)
for 1..200/2;...prints an example of the famous Bell curve:
44 - 45 70
46 - 47 114
48 - 49 168
50 - 51 250
52 - 53 395
54 - 55 588
56 - 57 871
58 - 59 1238 =
60 - 61 1807 =
62 - 63 2553 ==
64 - 65 3528 ===
66 - 67 4797 ====
68 - 69 6490 ======
70 - 71 8202 ========
72 - 73 10577 ==========
74 - 75 13319 =============
76 - 77 16283 ================
78 - 79 20076 ====================
80 - 81 23742 =======================
82 - 83 27726 ===========================
84 - 85 32205 ================================
86 - 87 36577 ====================================
88 - 89 40684 ========================================
90 - 91 44515 ============================================
92 - 93 47575 ===============================================
94 - 95 50098 ==================================================
96 - 97 52062 ====================================================
98 - 99 53338 =====================================================
100 - 101 52834 ====================================================
102 - 103 52185 ====================================================
104 - 105 50472 ==================================================
106 - 107 47551 ===============================================
108 - 109 44471 ============================================
110 - 111 40704 ========================================
112 - 113 36642 ====================================
114 - 115 32171 ================================
116 - 117 28166 ============================
118 - 119 23618 =======================
120 - 121 19873 ===================
122 - 123 16360 ================
124 - 125 13452 =============
126 - 127 10575 ==========
128 - 129 8283 ========
130 - 131 6224 ======
132 - 133 4661 ====
134 - 135 3527 ===
136 - 137 2516 ==
138 - 139 1833 =
140 - 141 1327 =
142 - 143 860
144 - 145 604
146 - 147 428
148 - 149 275
150 - 151 184
152 - 153 111
154 - 155 67 mix
Mixes an array in random order. In-place if given an array reference or not if given an array.
mix() could also have been named shuffle(), as in shuffling a deck of cards.
Example:
This:
print mix("a".."z"),"\n" for 1..3;...could write something like:
trgoykzfqsduphlbcmxejivnwa
qycatilmpgxbhrdezfwsovujkn
ytogrjialbewcpvndhkxfzqsmuInput:
- 1. Either a reference to an array as the only input. This array will then be mixed in-place. The array will be changed:
-
This:
@a=mix(@a)is the same as:mix(\@a). - 2. Or an array of zero, one or more elements.
Note that an input-array which COINCIDENTLY SOME TIMES has one element (but more other times), and that element is an array-ref, you will probably not get the expected result.
To check distribution:
perl -MAcme::Tools -le 'print mix("a".."z") for 1..26000'|cut -c1|sort|uniq -c|sort -nThe letters a-z should occur around 1000 times each.
Shuffles a deck of cards: (s=spaces, h=hearts, c=clubs, d=diamonds)
perl -MAcme::Tools -le '@cards=map join("",@$_),cart([qw/s h c d/],[2..10,qw/J Q K A/]); print join " ",mix(@cards)'(Uses "cart", which is not a typo, see further down here)
Note: List::Util::shuffle() is approximately four times faster. Both respects the Perl built-in srand().
nvl
The no value function (or null value function)
nvl() takes two or more arguments. (Oracles nvl-function take just two)
Returns the value of the first input argument with length() > 0.
Return undef if there is no such input argument.
In perl 5.10 and perl 6 this will most often be easier with the // operator, although nvl() and // treats empty strings "" differently. Sub nvl here considers empty strings and undef the same.
repl
Synonym for replace().
replace
Return the string in the first input argument, but where pairs of search-replace strings (or rather regexes) has been run.
Works as replace() in Oracle, or rather regexp_replace() in Oracle 10 and onward. Except that this replace() accepts more than three arguments.
Examples:
print replace("water","ater","ine"); # Turns water into wine
print replace("water","ater"); # w
print replace("water","at","eath"); # weather
print replace("water","wa","ju",
"te","ic",
"x","y", # No x is found, no y is returned
'r$',"e"); # Turns water into juice. 'r$' says that the r it wants
# to change should be the last letters. This reveals that
# second, fourth, sixth and so on argument is really regexs,
# not normal strings. So use \ (or \\ inside "") to protect
# the special characters of regexes. You probably also
# should write qr/regexp/ instead of 'regexp' if you make
# use of regexps here, just to make it more clear that
# these are really regexps, not strings.
print replace('JACK and JUE','J','BL'); # prints BLACK and BLUE
print replace('JACK and JUE','J'); # prints ACK and UE
print replace("abc","a","b","b","c"); # prints ccc (not bcc)If the first argument is a reference to a scalar variable, that variable is changed "in place".
Example:
my $str="test";
replace(\$str,'e','ee','s','S');
print $str; # prints teeStdecode_num
See "decode".
decode
decode() and decode_num() works just as Oracles decode().
decode() and decode_num() accordingly uses perl operators eq and == for comparison.
Examples:
my $a=123;
print decode($a, 123,3, 214,4, $a); # prints 3
print decode($a, 123=>3, 214=>4, $a); # prints 3, same thing since => is synonymous to comma in PerlThe first argument is tested against the second, fourth, sixth and so on, and then the third, fifth, seventh and so on is returned if decode() finds an equal string or number.
In the above example: 123 maps to 3, 124 maps to 4 and the last argument $a is returned elsewise.
More examples:
my $a=123;
print decode($a, 123=>3, 214=>7, $a); # also 3, note that => is synonym for , (comma) in perl
print decode($a, 122=>3, 214=>7, $a); # prints 123
print decode($a, 123.0 =>3, 214=>7); # prints 3
print decode($a, '123.0'=>3, 214=>7); # prints nothing (undef), no last argument default value here
print decode_num($a, 121=>3, 221=>7, '123.0','b'); # prints bSort of:
decode($string, %conversion, $default);The last argument is returned as a default if none of the keys in the keys/value-pairs matched.
A more perl-ish and often faster way of doing the same:
{123=>3, 214=>7}->{$a} || $a # (beware of 0)between
Input: Three arguments.
Returns: Something true if the first argument is numerically between the two next.
bound
Input: Three arguments: value, minumum, maximum. If the value is a reference to a scalar variable, the variables value is replaced by the bound.
Output: Returns the value if its between the given minumum and maximum. Returns minimum if the value is less or maximum if the value is more.
my $v = 234;
print bound( $v, 200, 250 ); #prints 234
print bound( $v, 150, 200 ); #prints 200
print bound( $v, 250, 300 ); #prints 250
print bound(\$v, 250, 300 ); #prints 250 and changes $v
print $v; #prints 250SETS
distinct
Returns the values of the input list, sorted alfanumerically, but only one of each value. This is the same as "uniq" except uniq does not sort the returned list.
Example:
print join(", ", distinct(4,9,3,4,"abc",3,"abc")); # 3, 4, 9, abc
print join(", ", distinct(4,9,30,4,"abc",30,"abc")); # 30, 4, 9, abc note: alphanumeric sortin
Returns 1 (true) if first argument is in the list of the remaining arguments. Uses the perl-operator eq.
Otherwise it returns 0 (false).
print in( 5, 1,2,3,4,6); # 0
print in( 4, 1,2,3,4,6); # 1
print in( 'a', 'A','B','C','aa'); # 0
print in( 'a', 'A','B','C','a'); # 1I guess in perl 5.10 or perl 6 you could use the ~~ operator instead.
in_num
Just as sub "in", but for numbers. Internally uses the perl operator == instead of eq .
print in(5000, '5e3'); # 0
print in(5000, 5e3); # 1 since 5e3 is converted to 5000 before the call
print in_num(5000, 5e3); # 1
print in_num(5000, '+5.0e03'); # 1union
Input: Two arrayrefs. (Two lists, that is)
Output: An array containing all elements from both input lists, but no element more than once even if it occurs twice or more in the input.
Example, prints 1,2,3,4:
perl -MAcme::Tools -le 'print join ",", union([1,2,3],[2,3,3,4,4])' # 1,2,3,4minus
Input: Two arrayrefs.
Output: An array containing all elements in the first input array but not in the second.
Example:
perl -MAcme::Tools -le 'print join " ", minus( ["five", "FIVE", 1, 2, 3.0, 4], [4, 3, "FIVE"] )'Output is five 1 2.
intersect
Input: Two arrayrefs
Output: An array containing all elements which exists in both input arrays.
Example:
perl -MAcme::Tools -le 'print join" ", intersect( ["five", 1, 2, 3.0, 4], [4, 2+1, "five"] )' # 4 3 fiveOutput: 4 3 five
not_intersect
Input: Two arrayrefs
Output: An array containing all elements member of just one of the input arrays (not both).
Example:
perl -MAcme::Tools -le ' print join " ", not_intersect( ["five", 1, 2, 3.0, 4], [4, 2+1, "five"] )'The output is 1 2.
uniq
Input: An array of strings (or numbers)
Output: The same array in the same order, except elements which exists earlier in the list.
Same as "distinct" but distinct sorts the returned list, uniq does not.
Example:
my @t=(7,2,3,3,4,2,1,4,5,3,"x","xx","x",02,"07");
print join " ", uniq @t; # prints 7 2 3 4 1 5 x xx 07HASHES
subhash
Copies a subset of keys/values from one hash to another.
Input: First argument is a reference to a hash. The rest of the arguments are a list of the keys of which key/value-pair you want to be copied.
Output: The hash consisting of the keys and values you specified.
Example:
%population = ( Norway=>5000000, Sweden=>9500000, Finland=>5400000,
Denmark=>5600000, Iceland=>320000,
India => 1.21e9, China=>1.35e9, USA=>313e6, UK=>62e6 );
%scandinavia = subhash( \%population , 'Norway', 'Sweden', 'Denmark' ); # this and
%scandinavia = (Norway=>5000000,Sweden=>9500000,Denmark=>5600000); # this is the same
print "Population of $_ is $scandinavia{$_}\n" for keys %scandinavia;...prints the populations of the three scandinavian countries.
Note: The values are NOT deep copied when they are references. (Use Storable::dclone() to do that).
Note2: For perl version 5.20+ subhashes (hash slices returning keys as well as values) is built in like this:
%scandinavia = %population{'Norway','Sweden','Denmark'};hashtrans
Input: a reference to a hash of hashes
Output: a hash like the input-hash, but matrix transposed (kind of). Think of it as if X and Y has swapped places.
%h = ( 1 => {a=>33,b=>55},
2 => {a=>11,b=>22},
3 => {a=>88,b=>99} );
print serialize({hashtrans(\%h)},'v');Gives:
%v=( 'a'=>{'1'=>'33','2'=>'11','3'=>'88'},
'b'=>{'1'=>'55','2'=>'22','3'=>'99'} );COMPRESSION
"zipb64", "unzipb64", "zipbin", "unzipbin", "gzip", and "gunzip" compresses and uncompresses strings to save space in disk, memory, database or network transfer. Trades time for space. (Beware of wormholes)
zipb64
Compresses the input (text or binary) and returns a base64-encoded string of the compressed binary data. No known limit on input length, several MB has been tested, as long as you've got the RAM...
Input: One or two strings.
First argument: The string to be compressed.
Second argument is optional: A dictionary string.
Output: a base64-kodet string of the compressed input.
The use of an optional dictionary string will result in an even further compressed output in the dictionary string is somewhat similar to the string that is compressed (the data in the first argument).
If x relatively similar string are to be compressed, i.e. x number automatic of email responses to some action by a user, it will pay of to choose one of those x as a dictionary string and store it as such. (You will also use the same dictionary string when decompressing using "unzipb64".
The returned string is base64 encoded. That is, the output is 33% larger than it has to be. The advantage is that this string more easily can be stored in a database (without the hassles of CLOB/BLOB) or perhaps easier transfer in http POST requests (it still needs some url-encoding, normally). See "zipbin" and "unzipbin" for the same without base 64 encoding.
Example 1, normal compression without dictionary:
$txt = "Test av komprimering, hva skjer? " x 10; # ten copies of this norwegian string, $txt is now 330 bytes (or chars rather...)
print length($txt)," bytes input!\n"; # prints 330
$zip = zipb64($txt); # compresses
print length($zip)," bytes output!\n"; # prints 65
print $zip; # prints the base64 string ("noise")
$output=unzipb64($zip); # decompresses
print "Hurra\n" if $output eq $txt; # prints Hurra if everything went well
print length($output),"\n"; # prints 330Example 2, same compression, now with dictionary:
$txt = "Test av komprimering, hva skjer? " x 10; # Same original string as above
$dict = "Testing av kompresjon, hva vil skje?"; # dictionary with certain similarities
# of the text to be compressed
$zip2 = zipb64($txt,$dict); # compressing with $dict as dictionary
print length($zip2)," bytes output!\n"; # prints 49, which is less than 65 in ex. 1 above
$output=unzipb64($zip2,$dict); # uses $dict in the decompressions too
print "Hurra\n" if $output eq $txt; # prints Hurra if everything went wellExample 3, dictionary = string to be compressed: (out of curiosity)
$txt = "Test av komprimering, hva skjer? " x 10; # Same original string as above
$zip3 = zipb64($txt,$txt); # hmm
print length($zip3)," bytes output!\n"; # prints 25
print "Hurra\n" if unzipb64($zip3,$txt) eq $txt; # hipp hipp ...zipb64() and zipbin() is really just wrappers around Compress::Zlib and inflate() & co there.
zipbin
zipbin() does the same as zipb64() except that zipbin() does not base64 encode the result. Returns binary data.
See "zip" for documentation.
unzipb64
Opposite of "zipb64".
Input:
First argument: A string made by "zipb64"
Second argument: (optional) a dictionary string which where used in "zipb64".
Output: The original string (be it text or binary).
See "zipb64".
unzipbin
unzipbin() does the same as "unzip" except that unzipbin() wants a pure binary compressed string as input, not base64.
See "unzipb64" for documentation.
gzip
Input: A string you want to compress. Text or binary.
Output: The binary compressed representation of that input string.
gzip() is really the same as Compress:Zlib::memGzip() except that gzip() just returns the input-string if for some reason Compress::Zlib could not be required. Not installed or not found. (Compress::Zlib is a built in module in newer perl versions).
gzip() uses the same compression algorithm as the well known GNU program gzip found in most unix/linux/cygwin distros. Except gzip() does this in-memory. (Both using the C-library zlib).
gunzip
Input: A binary compressed string. I.e. something returned from gzip() earlier or read from a .gz file.
Output: The original larger non-compressed string. Text or binary.
bzip2
bzip2() and bunzip2() works just as gzip() and gunzip(), but use another compression algorithm. This is usually better but slower than the gzip-algorithm. Especially in the compression. Decompression speed is less different.
See also man bzip2, man bunzip2 and Compress::Bzip2
bunzip2
Decompressed something compressed by bzip2() or the data from a .bz2 file. See "bzip2".
NET, WEB, CGI-STUFF
ipaddr
Input: an IP-number
Output: either an IP-address machine.sld.tld or an empty string if the DNS lookup didn't find anything.
Example:
perl -MAcme::Tools -le 'print ipaddr("129.240.8.200")' # prints www.uio.noUses perls gethostbyaddr internally.
ipaddr() memoizes the results internally (using the %Acme::Tools::IPADDR_memo hash) so only the first loopup on a particular IP number might take some time.
Some few DNS loopups can take several seconds. Most is done in a fraction of a second. Due to this slowness, medium to high traffic web servers should probably turn off hostname lookups in their logs and just log IP numbers by using HostnameLookups Off in Apache httpd.conf and then use ipaddr afterwards if necessary.
ipnum
ipnum() does the opposite of ipaddr()
Does an attempt of converting an IP address (hostname) to an IP number. Uses DNS name servers via perls internal gethostbyname(). Return empty string (undef) if unsuccessful.
print ipnum("www.uio.no"); # prints 129.240.13.152Does internal memoization via the hash %Acme::Tools::IPNUM_memo.
webparams
Input: (optional)
Zero or one input argument: A string of the same type often found behind the first question mark (?) in URLs.
This string can have one or more parts separated by & chars.
Each part consists of key=value pairs (with the first = char being the separation char).
Both key and value can be url-encoded.
If there is no input argument, webparams uses $ENV{QUERY_STRING} instead.
If also $ENV{QUERY_STRING} is lacking, webparams() checks if $ENV{REQUEST_METHOD} eq 'POST'. In that case $ENV{CONTENT_LENGTH} is taken as the number of bytes to be read from STDIN and those bytes are used as the missing input argument.
The environment variables QUERY_STRING, REQUEST_METHOD and CONTENT_LENGTH is typically set by a web server following the CGI standard (which Apache and most of them can do I guess) or in mod_perl by Apache. Although you are probably better off using CGI. Or $R->args() or $R->content() in mod_perl.
Output:
webparams() returns a hash of the key/value pairs in the input argument. Url-decoded.
If an input string has more than one occurrence of the same key, that keys value in the returned hash will become concatenated each value separated by a , char. (A comma char)
Examples:
use Acme::Tools;
my %R=webparams();
print "Content-Type: text/plain\n\n"; # or rather \cM\cJ\cM\cJ instead of \n\n to be http-compliant
print "My name is $R{name}";Storing those four lines in a file in the directory designated for CGI-scripts on your web server (or perhaps naming the file .cgi is enough), and chmod +x /.../cgi-bin/script and the URL http://some.server.somewhere/cgi-bin/script?name=HAL will print My name is HAL to the web page.
http://some.server.somewhere/cgi-bin/script?name=Bond&name=+James+Bond will print My name is Bond, James Bond.
urlenc
Input: a string
Output: the same string URL encoded so it can be sent in URLs or POST requests.
In URLs (web addresses) certain characters are illegal. For instance space and newline. And certain other chars have special meaning, such as +, %, =, ?, &.
These illegal and special chars needs to be encoded to be sent in URLs. This is done by sending them as % and two hex-digits. All chars can be URL encodes this way, but it's necessary just on some.
Example:
$search="Østdal, Åge";
my $url="http://machine.somewhere.com/search?q=" . urlenc($search);
print $url;Prints http://machine.somewhere.com/search?q=%D8stdal%2C%20%C5ge
urldec
Opposite of "urlenc".
Example, this returns ' ø'. That is space and ø.
urldec('+%C3')ht2t
ht2t is short for html-table to table.
This sub extracts an html-<table>s and returns its <tr>s and <td>s as an array of arrayrefs. And strips away any html inside the <td>s as well.
my @table = ht2t($html,'some string occuring before the <table> you want');Input: One or two arguments.
First argument: the html where a <table> is to be found and converted.
Second argument: (optional) If the html contains more than one <table>, and you do not want the first one, applying a second argument is a way of telling ht2t which to capture: the one with this word or string occurring before it.
Output: An array of arrayrefs.
ht2t() is a quick and dirty way of scraping (or harvesting as it is also called) data from a web page. Look too HTML::Parse to do this more accurate.
Example:
use Acme::Tools;
use LWP::Simple;
my $url = "http://en.wikipedia.org/wiki/List_of_countries_by_population";
for( ht2t( get($url), "Countries" ) ) {
my($rank, $country, $pop) = @$_;
$pop =~ s/,//g;
printf "%3d | %-32s | %9d\n", @$_ if $pop>0;
}Output:
1 | China | 1367740000
2 | India | 1262090000
3 | United States | 319043000
4 | Indonesia | 252164800
5 | Brazil | 203404000...and so on.
FILES, DIRECTORIES
writefile
Justification:
Perl needs three or four operations to make a file out of a string:
open my $FILE, '>', $filename or die $!;
print $FILE $text;
close($FILE);This is way simpler:
writefile($filename,$text);Sub writefile opens the file i binary mode (binmode()) and has two usage modes:
Input: Two arguments
First argument is the filename. If the file exists, its overwritten. If the file can not be opened for writing, a die (a croak really) happens.
Second input argument is one of:
Either a scaler. That is a normal string to be written to the file.
Or a reference to a scalar. That referred text is written to the file.
Or a reference to an array of scalars. This array is the written to the file element by element and
\nis automatically appended to each element.
Alternativelly, you can write several files at once.
Example, this:
writefile('file1.txt','The text....tjo');
writefile('file2.txt','The text....hip');
writefile('file3.txt','The text....and hop');...is the same as this:
writefile([
['file1.txt','The text....tjo'],
['file2.txt','The text....hip'],
['file3.txt','The text....and hop'],
]);Output: Nothing (for the time being). die()s (croak($!) really) if something goes wrong.
readfile
Just as with "writefile" you can read in a whole file in one operation with readfile(). Instead of:
open my $FILE,'<', $filename or die $!;
my $data = join"",<$FILE>;
close($FILE);This is simpler:
my $data = readfile($filename);More examples:
Reading the content of the file to a scalar variable: (Any content in $data will be overwritten)
my $data;
readfile('filename.txt',\$data);Reading the lines of a file into an array:
my @lines;
readfile('filnavn.txt',\@lines);
for(@lines){
...
}Note: Chomp is done on each line. That is, any newlines (\n) will be removed. If @lines is non-empty, this will be lost.
Sub readfile is context aware. If an array is expected it returns an array of the lines without a trailing \n. The last example can be rewritten:
for(readfile('filnavn.txt')){
...
}With two input arguments, nothing (undef) is returned from readfile().
readdirectory
Input:
Name of a directory.
Output:
A list of all files in it, except of . and .. (on linux/unix systems, all directories have a . and .. directory).
The names of all types of files are returned: normal files, directories, symbolic links, pipes, semaphores. That is every thing shown by ls -la except . and ..
readdirectory do not recurce down into subdirectories (but see example below).
Example:
my @files = readdirectory("/tmp");Why readdirectory?
Sometimes calling the built ins opendir, readdir and closedir seems a tad tedious, since this:
my $dir="/usr/bin";
opendir(D,$dir);
my @files=map "$dir/$_", grep {!/^\.\.?$/} readdir(D);
closedir(D);Is the same as this:
my @files=readdirectory("/usr/bin");See also: File::Find
Why not readdirectory?
On huge directories with perhaps tens or houndreds of thousands of files, readdirectory() will consume more memory than perls opendir/readdir. This isn't usually a concern anymore for modern computers with gigabytes of RAM, but might be the rationale behind Perls more tedious way created in the 80s. The same argument goes for file slurping. On the other side it's also a good practice to never assume to much on available memory and the number of files if you don't know for certain that enough memory is available whereever your code is run or that the size of the directory is limited.
Example:
How to get all files in the /tmp directory including all subdirectories below of any depth:
my @files=("/tmp");
map {-d $_ and unshift @files,$_ or push @files,$_} readdirectory(shift(@files)) while -d $files[0];...or to avoid symlinks and only get real files:
map {-d and !-l and unshift @files,$_ or -f and !-l and push @files,$_} readdirectory(shift(@files)) while -d $files[0];chall
Does chmod + utime + chown on one or more files.
Returns the number of files of which those operations was successful.
Mode, uid, gid, atime and mtime are set from the array ref in the first argument.
The first argument references an array which is exactly like an array returned from perls internal stat($filename) -function.
Example:
my @stat=stat($filenameA);
chall( \@stat, $filenameB, $filenameC, ... ); # by stat-array
chall( $filenameA, $filenameB, $filenameC, ... ); # by file nameCopies the chmod, owner, group, access time and modify time from file A to file B and C.
See perldoc -f stat, perldoc -f chmod, perldoc -f chown, perldoc -f utime
makedir
Input: One or two arguments.
Works like perls mkdir() except that makedir() will create nesessary parent directories if they dont exists.
First input argument: A directory name (absolute, starting with / or relative).
Second input argument: (optional) permission bits. Using the normal 0777^umask() as the default if no second input argument is provided.
Example:
makedir("dirB/dirC")...will create directory dirB if it does not already exists, to be able to create dirC inside dirB.
Returns true on success, otherwise false.
makedir() memoizes directories it has checked for existence before (trading memory and for speed). Thus directories removed during running the script is not discovered by makedir.
See also perldoc -f mkdir, man umask
md5sum
Input: a filename.
Output: a string of 32 hexadecimal chars from 0-9 or a-f.
Example, the md5sum gnu/linux command without options could be implementet like this:
#!/usr/bin/perl
use Acme::Tools;
print eval{ md5sum($_)." $_\n" } || $@ for @ARGV;This sub requires Digest::MD5, which is a core perl-module since version 5.?.? It does not slurp the files or spawn new processes.
read_conf
First argument: A file name (string) or a reference to a string with settings in the format described below.
Second argument, optional: A reference to a hash with the settings from the file (or string reference). The hash do not have to be empty beforehand.
Returns a hash with the settings as in this examples:
my %conf = read_conf('/etc/thing/thing.conf');
print $conf{sectionA}{knobble}; #prints ABC if the file is as shown below
print $conf{sectionA}{gobble}; #prints ZZZ, the last gobble
print $conf{''}{switch}; #prints OK if the file is as shown below
print $conf{part2}{password}; #prints oh:no= xFile use for the above example:
switch: OK #before first section, the '' (empty) section
[sectionA]
knobble: ABC
gobble: XYZ #this gobble is overwritten by the gobble on the next line
gobble: ZZZ
[part2]
password: oh:no= x #should be betterEverything from # and behind is regarded comments and ignored. Comments can be on any line.
A : or = separates keys and values. Spaces at the beginning or end of lines are ignored (after removal of #comments), as are any spaces before and after : and = separators. Empty lines is also ignored. Keys and values can contain internal spaces and tabs, but not at the beginning or end. Sections are marked with [sectionname]. Section names, keys and values is case sensitive. Acme::Tools::read_conf does not support multi-line values. read_conf can be a simpler alternative to the core module Config::Std which has its own hassles.
TIME FUNCTIONS
# head2 timestr # # Converts epoch or YYYYMMDD-HH24:MI:SS time string to other forms of time. # # Input: One, two or three arguments. # # First argument: A format string. # # Second argument: (optional) An epock time() number or a time # string of the form YYYYMMDD-HH24:MI:SS. I no second argument is gives, # picks the current time(). # # Thirs argument: (optional True eller false. If true and first argument is eight digits: # Its interpreted as a YYYYMMDD time string, not an epoch time. # If true and first argument is six digits its interpreted as a DDMMYY date. # # Output: a date or clock string on the wanted form. # # Exsamples: # # Prints 3. july 1997 if thats the dato today: # # perl -MAcme::Tools -le 'print timestr("D. month YYYY")' # # print timestr"HH24:MI"); # prints 23:55 if thats the time now # print timestr"HH24:MI",time()); # ...same,since time() is the default # print timestr"HH:MI",time()-5*60); # prints 23:50 if that was the time 5 minutes ago # print timestr"HH:MI",time()-5*60*60); # print 18:55 if thats the time 5 hours ago # timestr"Day D. month YYYY HH:MI"); # Saturday juli 2004 23:55 (stor L liten j) # timestr"dag D. Måned ÅÅÅÅ HH:MI"); # lørdag 3. Juli 2004 23:55 (omvendt) # timestr"DG DD. MONTH YYYY HH24:MI"); # LØR 03. JULY 2004 23:55 (HH24 = HH, month=engelsk) # timestr"DD-MON-YYYY"); # 03-MAY-2004 (mon engelsk) # timestr"DD-MÅN-YYYY"); # 03-MAI-2004 (mån norsk) # # Formatstrengen i argument to: # # Formatstrengen kan innholde en eller flere av følgende koder. # # Formatstrengen kan inneholde tekst, som f.eks. tid('Klokken er: HH:MI'). # Teksten her vil ikke bli konvertert. Men det anbefales å holde tekst utenfor # formatstrengen, siden framtidige koder kan erstatte noen tegn i teksten med tall. # # Der det ikke står annet: bruk store bokstaver. # # YYYY Årstallet med fire sifre # ÅÅÅÅ Samme som YYYY (norsk) # YY Årstallet med to sifre, f.eks. 04 for 2004 (anbefaler ikke å bruke tosifrede år) # ÅÅ Samme som YY (norsk) # yyyy Årtallet med fire sifre, men skriver ingenting dersom årstallet er årets (plass-sparing, ala tidstrk() ). # åååå Samme som yyyy # MM Måned, to sifre. F.eks. 08 for august. # DD Dato, alltid to sifer. F.eks 01 for første dag i en måned. # D Dato, ett eller to sifre. F.eks. 1 for første dag i en måned. # HH Time. Fra 00, 01, 02 osv opp til 23. # HH24 Samme som HH. Ingen forskjell. Tatt med for å fjerne tvil om det er 00-12-11 eller 00-23 # HH12 NB: Kl 12 blir 12, kl 13 blir 01, kl 14 blir 02 osv .... 23 blir 11, # MEN 00 ETTER MIDNATT BLIR 12 ! Oracle er også slik. # TT Samme som HH. Ingen forskjell. Fra 00 til 23. TT24 og TT12 finnes ikke. # MI Minutt. Fra 00 til 59. # SS Sekund. Fra 00 til 59. # # Måned Skriver månedens fulle navn på norsk. Med stor førstebokstav, resten små. # F.eks. Januar, Februar osv. NB: Vær oppmerksom på at måneder på norsk normal # skrives med liten førstebokstav (om ikke i starten av setning). Alt for mange # gjør dette feil. På engelsk skrives de ofte med stor førstebokstav. # Måne Skriver månedens navn forkortet og uten punktum. På norsk. De med tre eller # fire bokstaver forkortes ikke: Jan Feb Mars Apr Mai Juni Juli Aug Sep Okt Nov Des # Måne. Samme som Måne, men bruker punktum der det forkortes. Bruker alltid fire tegn. # Jan. Feb. Mars Apr. Mai Juni Juli Aug. Sep. Okt. Nov. Des. # Mån Tre bokstaver, norsk: Jan Feb Mar Apr Mai Jun Jul Aug Sep Okt Nov Des # # Month Engelsk: January February May June July October December, ellers = norsk. # Mont Engelsk: Jan Feb Mars Apr May June July Aug Sep Oct Nov Dec # Mont. Engelsk: Jan. Feb. Mars Apr. May June July Aug. Sep. Oct. Nov. Dec. # Mon Engelsk: Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec # # måned måne måne. mån Samme, men med liten førstebokstav. På norsk. # month mont mont. mon Samme, men med liten førstebokstav. På engelsk. # MÅNED MÅNE MÅNE. MÅN Samme, men med alle bokstaver store. På norsk. # MONTH MONT MONT. MON Samme, men med alle bokstaver store. På engelsk. # # Dag Dagens navn på norsk. Stor førstebokstav, resten små. Mandag Tirsdag Onsdag Torsdag # Fredag Lørdag Søndag. # Dg Dagens navn på norsk forkortet. Stor førstebokstav, resten små. # Alltid tre bokstaver: Man Tir Ons Tor Fre Lør Søn # Day Samme som Dag, men på engelsk. Monday Tuesday Wednesday Thursday Friday Saturday Sunday # Dy Samme som Dg, men på engelsk. Alltid tre bokstaver: Mon Tue Wed Thu Fri Sat Sun # # dag dg day dy DAG DG DAY DY ....du klarer sikkert å gjette... # # UKE Ukenr ett eller to siffer. Bruker ISO-definisjonen som brukes stort sett i hele verden unntatt USA. # UKENR Ukenr, alltid to siffer, 01 02 osv. Se uke() et annet sted i SO::Bibl for mer om dette. # # # Gjenstår: Dag- og månedsnavn på nynorsk og samisk. # # Gjenstår: Dth => 1st eller 2nd hvis dato er den første eller andre # # Gjenstår: M => Måned ett eller to sifre, slik D er dato med ett eller to. Vanskelig/umulig(?) # # Gjenstår: J => "julian day".... # # Gjenstår: Sjekke om den takler tidspunkt for svært lenge siden eller om svært lenge... # Kontroll med kanskje die ved input # # Gjenstår: sub dit() (tid baklengs... eller et bedre navn) for å konvertere andre veien. # Som med to_date og to_char i Oracle. Se evt Date::Parse isteden. # # Gjenstår: Hvis formatstrengen er DDMMYY (evt DDMMÅÅ), og det finnes en tredje argument, # så vil den tredje argumenten sees på som personnummer og DD vil bli DD+40 # eller MM vil bli MM+50 hvis personnummeret medfører D- eller S-type fødselsnr. # Hmm, kanskje ikke. Se heller sub foedtdato og sub fnr m.fl. # # Gjenstår: Testing på tidspunkter på mer enn hundre år framover eller tilbake i tid. # # Se også "tidstrk" og "tidstr" # # =cut # # our %SObibl_tid_strenger; # our $SObibl_tid_pattern; # # sub tid # { # return undef if @_>1 and not defined $_[1]; # return 1900+(localtime())[5] if $_[0]=~/^(?:ÅÅÅÅ|YYYY)$/ and @_==1; # kjappis for tid("ÅÅÅÅ") og tid("YYYY") # # my($format,$time,$er_dato)=@_; # # # $time=time() if @_==1; # # ($time,$format)=($format,$time) # if $format=~/^[\d+\:\-]+$/; #swap hvis format =~ kun tall og : og - # # $format=~s,([Mm])aa,$1å,; # $format=~s,([Mm])AA,$1Å,; # # $time = yyyymmddhh24miss_time("$1$2$3$4$5$6") # if $time=~/^((?:19|20|18)\d\d) #yyyy # (0[1-9]|1[012]) #mm # (0[1-9]|[12]\d|3[01]) \-? #dd # ([01]\d|2[0-3]) \:? #hh24 # ([0-5]\d) \:? #mi # ([0-5]\d) $/x; #ss # # $time = yyyymmddhh24miss_time(dato_ok("$1$2$3")."000000") # if $time=~/^(\d\d)(\d\d)(\d\d)$/ and $er_dato; # # $time = yyyymmddhh24miss_time("$1$2${3}000000") # if $time=~/^((?:18|19|20)\d\d)(\d\d)(\d\d)$/ and $er_dato; # # my @lt=localtime($time); # if($format){ # unless(defined %SObibl_tid_strenger){ # %SObibl_tid_strenger= # ('MÅNED' => [4, 'JANUAR','FEBRUAR','MARS','APRIL','MAI','JUNI','JULI', # 'AUGUST','SEPTEMBER','OKTOBER','NOVEMBER','DESEMBER' ], # 'Måned' => [4, 'Januar','Februar','Mars','April','Mai','Juni','Juli', # 'August','September','Oktober','November','Desember'], # 'måned' => [4, 'januar','februar','mars','april','mai','juni','juli', # 'august','september','oktober','november','desember'], # 'MÅNE.' => [4, 'JAN.','FEB.','MARS','APR.','MAI','JUNI','JULI','AUG.','SEP.','OKT.','NOV.','DES.'], # 'Måne.' => [4, 'Jan.','Feb.','Mars','Apr.','Mai','Juni','Juli','Aug.','Sep.','Okt.','Nov.','Des.'], # 'måne.' => [4, 'jan.','feb.','mars','apr.','mai','juni','juli','aug.','sep.','okt.','nov.','des.'], # 'MÅNE' => [4, 'JAN','FEB','MARS','APR','MAI','JUNI','JULI','AUG','SEP','OKT','NOV','DES'], # 'Måne' => [4, 'Jan','Feb','Mars','Apr','Mai','Juni','Juli','Aug','Sep','Okt','Nov','Des'], # 'måne' => [4, 'jan','feb','mars','apr','mai','juni','juli','aug','sep','okt','nov','des'], # 'MÅN' => [4, 'JAN','FEB','MAR','APR','MAI','JUN','JUL','AUG','SEP','OKT','NOV','DES'], # 'Mån' => [4, 'Jan','Feb','Mar','Apr','Mai','Jun','Jul','Aug','Sep','Okt','Nov','Des'], # 'mån' => [4, 'jan','feb','mar','apr','mai','jun','jul','aug','sep','okt','nov','des'], # # 'MONTH' => [4, 'JANUARY','FEBRUARY','MARCH','APRIL','MAY','JUNE','JULY', # 'AUGUST','SEPTEMBER','OCTOBER','NOVEMBER','DECEMBER'], # 'Month' => [4, 'January','February','March','April','May','June','July', # 'August','September','October','November','December'], # 'month' => [4, 'january','february','march','april','may','june','july', # 'august','september','october','november','december'], # 'MONT.' => [4, 'JAN.','FEB.','MAR.','APR.','MAY','JUNE','JULY','AUG.','SEP.','OCT.','NOV.','DEC.'], # 'Mont.' => [4, 'Jan.','Feb.','Mar.','Apr.','May','June','July','Aug.','Sep.','Oct.','Nov.','Dec.'], # 'mont.' => [4, 'jan.','feb.','mar.','apr.','may','june','july','aug.','sep.','oct.','nov.','dec.'], # 'MONT' => [4, 'JAN','FEB','MAR','APR','MAY','JUNE','JULY','AUG','SEP','OCT','NOV','DEC'], # 'Mont' => [4, 'Jan','Feb','Mar','Apr','May','June','July','Aug','Sep','Oct','Nov','Dec'], # 'mont' => [4, 'jan','feb','mar','apr','may','june','july','aug','sep','oct','nov','dec'], # 'MON' => [4, 'JAN','FEB','MAR','APR','MAY','JUN','JUL','AUG','SEP','OCT','NOV','DEC'], # 'Mon' => [4, 'Jan','Feb','Mar','Apr','May','Jun','Jul','Aug','Sep','Oct','Nov','Dec'], # 'mon' => [4, 'jan','feb','mar','apr','may','jun','jul','aug','sep','oct','nov','dec'], # 'DAY' => [6, 'SUNDAY','MONDAY','TUESDAY','WEDNESDAY','THURSDAY','FRIDAY','SATURDAY'], # 'Day' => [6, 'Sunday','Monday','Tuesday','Wednesday','Thursday','Friday','Saturday'], # 'day' => [6, 'sunday','monday','tuesday','wednesday','thursday','friday','saturday'], # 'DY' => [6, 'SUN','MON','TUE','WED','THU','FRI','SAT'], # 'Dy' => [6, 'Sun','Mon','Tue','Wed','Thu','Fri','Sat'], # 'dy' => [6, 'sun','mon','tue','wed','thu','fri','sat'], # 'DAG' => [6, 'SØNDAG','MANDAG','TIRSDAG','ONSDAG','TORSDAG','FREDAG','LØRDAG'], # 'Dag' => [6, 'Søndag','Mandag','Tirsdag','Onsdag','Torsdag','Fredag','Lørdag'], # 'dag' => [6, 'søndag','mandag','tirsdag','onsdag','torsdag','fredag','lørdag'], # 'DG' => [6, 'SØN','MAN','TIR','ONS','TOR','FRE','LØR'], # 'Dg' => [6, 'Søn','Man','Tir','Ons','Tor','Fre','Lør'], # 'dg' => [6, 'søn','man','tir','ons','tor','fre','lør'], # ); # for(qw(MAANED Maaned maaned MAAN Maan maan),'MAANE.','Maane.','maane.'){ # $SObibl_tid_strenger{$_}=$SObibl_tid_strenger{replace($_,"aa","å","AA","Å")}; # } # $SObibl_tid_pattern=join("|",map{quotemeta($_)} # sort{length($b)<=>length($a)} # keys %SObibl_tid_strenger); # #uten sort kan "måned" bli "mared", fordi "mån"=>"mar" # } # $format=~s/($SObibl_tid_pattern)/$SObibl_tid_strenger{$1}[1+$lt[$SObibl_tid_strenger{$1}[0]]]/g; # # $format=~s/TT|tt/HH/; # $format=~s/ÅÅ/YY/g;$format=~s/åå/yy/g; # $format=~s/YYYY /1900+$lt[5] /gxe; # $format=~s/(\s?)yyyy /$lt[5]==(localtime)[5]?"":$1.(1900+$lt[5])/gxe; # $format=~s/YY /sprintf("%02d",$lt[5]%100) /gxei; # $format=~s/MM /sprintf("%02d",$lt[4]+1) /gxe; # $format=~s/mm /sprintf("%d",$lt[4]+1) /gxe; # $format=~s/DD /sprintf("%02d",$lt[3]) /gxe; # $format=~s/D(?![AaGgYyEeNn])/$lt[3] /gxe; #EN pga desember og wednesday # $format=~s/dd /sprintf("%d",$lt[3]) /gxe; # $format=~s/hh12|HH12 /sprintf("%02d",$lt[2]<13?$lt[2]||12:$lt[2]-12)/gxe; # $format=~s/HH24|HH24|HH|hh /sprintf("%02d",$lt[2]) /gxe; # $format=~s/MI /sprintf("%02d",$lt[1]) /gxei; # $format=~s/SS /sprintf("%02d",$lt[0]) /gxei; # $format=~s/UKENR /sprintf("%02d",ukenr($time)) /gxei; # $format=~s/UKE /ukenr($time) /gxei; # $format=~s/SS /sprintf("%02d",$lt[0]) /gxei; # # return $format; # } # else{ # return sprintf("%04d%02d%02d%02d%02d%02d",1900+$lt[5],1+$lt[4],@lt[3,2,1,0]); # } # }
easter
Input: A year (a four digit number)
Output: array of two numbers: day and month of Easter Sunday that year. Month 3 means March and 4 means April.
sub easter { use integer;my$Y=shift;my$C=$Y/100;my$L=($C-$C/4-($C-($C-17)/25)/3+$Y%19*19+15)%30;
(($L-=$L>28||($L>27?1-(21-$Y%19)/11:0))-=($Y+$Y/4+$L+2-$C+$C/4)%7)<4?($L+28,3):($L-3,4) }...is a "golfed" version of Oudins algorithm (1940) http://astro.nmsu.edu/~lhuber/leaphist.html (see also http://www.smart.net/~mmontes/ec-cal.html )
Valid for any Gregorian year. Dates repeat themselves after 70499183 lunations = 2081882250 days = ca 5699845 years. However, our planet will by then have a different rotation and spin time...
Example:
( $day, $month ) = easter( 2012 ); # $day == 8 and $month == 4Example 2:
my @e=map sprintf("%02d%02d", reverse(easter($_))), 1800..300000;
print "First: ".min(@e)." Last: ".max(@e)."\n"; # First: 0322 Last: 0425time_fp
No input arguments.
Return the same number as perls time() except with decimals (fractions of a second, _fp as in floating point number).
print time_fp(),"\n";
print time(),"\n";Could write:
1116776232.38632...if that is the time now.
Or just:
1116776232...from perl's internal time() if Time::HiRes isn't installed and available.
sleep_fp
sleep_fp() work as the built in sleep(), but accepts fractional seconds:
sleep_fp(0.02); # sleeps for 20 millisecondsSub sleep_fp do a require Time::HiRes, thus it might take some extra time the first call. To avoid that, add use Time::HiRes to your code. Sleep_fp should not be trusted for accuracy to more than a tenth of a second. Virtual machines tend to be less accurate (sleep longer) than physical ones. This was tested on VMware and RHEL (Linux). See also Time::HiRes.
eta
Estimated time of arrival (ETA).
for(@files){
...do work on file...
my $eta = eta( ++$i, 0+@files ); # file now, number of files
print "" . localtime($eta);
}
..DOC MISSING..etahhmm
...NOT YETsleep_until
sleep_until(0.5) sleeps until half a second has passed since the last call to sleep_until. This example starts the next job excactly ten seconds after the last job started even if the last job lasted for a while (but not more than ten seconds):
for(@jobs){
sleep_until(10);
print localtime()."\n";
...heavy job....
}Might print:
Thu Jan 12 16:00:00 2012
Thu Jan 12 16:00:10 2012
Thu Jan 12 16:00:20 2012...and so on even if the ...heavy job...-part takes more than a second to complete. Whereas if sleep(10) was used, each job would spend more than ten seconds in average since the work time would be added to sleep(10).
Note: sleep_until() will remember the time of ANY last call of this sub, not just the one on the same line in the source code (this might change in the future). The first call to sleep_until() will be the same as sleep_fp() or Perl's own sleep() if the argument is an integer.
leapyear
Input: A year. A four digit number.
Output: True (1) or false (0) of weather the year is a leap year or not. (Uses current calendar even for period before it was used).
print join(", ",grep leapyear($_), 1900..2014)."\n";Prints: (note, 1900 is not a leap year, but 2000 is)
1904, 1908, 1912, 1916, 1920, 1924, 1928, 1932, 1936, 1940, 1944, 1948, 1952, 1956,
1960, 1964, 1968, 1972, 1976, 1980, 1984, 1988, 1992, 1996, 2000, 2004, 2008, 2012OTHER
qrlist
Input: An array of values to be used to test againts for existence.
Output: A reference to a regular expression. That is a qr//
The regex sets $1 if it match.
Example:
my @list=qw/ABc XY DEF DEFG XYZ/;
my $filter=qrlist("ABC","DEF","XY."); # makes a regex of it qr/^(\QABC\E|\QDEF\E|\QXY.\E)$/
my @filtered= grep { $_ =~ $filter } @list; # returns DEF and XYZ, but not XYZ because the . char is taken literallyNote: Filtering with hash lookups are WAY faster.
Source:
sub qrlist (@) { my $str=join"|",map quotemeta, @_; qr/^($str)$/ }ansicolor
Perhaps easier to use than Term::ANSIColor ?
Input: One argument. A string where the char ¤ have special meaning and is replaced by color codings depending on the letter following the ¤.
Output: The same string, but with ¤letter replaced by ANSI color codes respected by many types terminal windows. (xterm, telnet, ssh, telnet, rlog, vt100, cygwin, rxvt and such...).
Codes for ansicolor():
¤r red
¤g green
¤b blue
¤y yellow
¤m magenta
¤B bold
¤u underline
¤c clear
¤¤ reset, quits and returns to default text color.Example:
print ansicolor("This is maybe ¤ggreen¤¤?");Prints This is maybe green? where the word green is shown in green.
If Term::ANSIColor is not installed or not found, returns the input string with every ¤ including the following code letters removed. (That is: ansicolor is safe to use even if Term::ANSIColor is not installed, you just don't get the colors).
See also Term::ANSIColor.
ccn_ok
Checks if a Credit Card number (CCN) has correct control digits according to the LUHN-algorithm from 1960. This method of control digits is used by MasterCard, Visa, American Express, Discover, Diners Club / Carte Blanche, JCB and others.
Input:
A credit card number. Can contain non-digits, but they are removed internally before checking.
Output:
Something true or false.
Or more accurately:
Returns undef (false) if the input argument is missing digits.
Returns 0 (zero, which is false) is the digits is not correct according to the LUHN algorithm.
Returns 1 or the name of a credit card company (true either way) if the last digit is an ok control digit for this ccn.
The name of the credit card company is returned like this (without the ' character)
Returns (wo '') Starts on Number of digits
------------------------------ ------------------------ ----------------
'MasterCard' 51-55 16
'Visa' 4 13 eller 16
'American Express' 34 eller 37 15
'Discover' 6011 16
'Diners Club / Carte Blanche' 300-305, 36 eller 38 14
'JCB' 3 16
'JCB' 2131 eller 1800 15And should perhaps have had:
'enRoute' 2014 eller 2149 15...but that card uses either another control algorithm or no control digits at all. So enRoute is never returned here.
If the control digits is valid, but the input does not match anything in the column starts on, 1 is returned.
(This is also the same control digit mechanism used in Norwegian KID numbers on payment bills)
The first digit in a credit card number is supposed to tell what "industry" the card is meant for:
MII Digit Value Issuer Category
--------------------------- ----------------------------------------------------
0 ISO/TC 68 and other industry assignments
1 Airlines
2 Airlines and other industry assignments
3 Travel and entertainment
4 Banking and financial
5 Banking and financial
6 Merchandizing and banking
7 Petroleum
8 Telecommunications and other industry assignments
9 National assignment...although this has no meaning to Acme::Tools::ccn_ok().
The first six digits is Issuer Identifier, that is the bank (probably). The rest in the "account number", except the last digits, which is the control digit. Max length on credit card numbers are 19 digits.
KID_ok
Checks if a norwegian KID number has an ok control digit.
To check if a customer has typed the number correctly.
This uses the LUHN algorithm (also known as mod-10) from 1960 which is also used internationally in control digits for credit card numbers, and Canadian social security ID numbers as well.
The algorithm, as described in Phrack (47-8) (a long time hacker online publication):
"For a card with an even number of digits, double every odd numbered
digit and subtract 9 if the product is greater than 9. Add up all the
even digits as well as the doubled-odd digits, and the result must be
a multiple of 10 or it's not a valid card. If the card has an odd
number of digits, perform the same addition doubling the even numbered
digits instead."Input: A KID-nummer. Must consist of digits 0-9 only, otherwise a die (croak) happens.
Output:
- Returns undef if the input argument is missing.
- Returns 0 if the control digit (the last digit) does not satify the LUHN/mod-10 algorithm.
- Returns 1 if ok
See also: "ccn_ok"
range
Input:
One or more numeric arguments:
First: x (first returned element)
Second: y (last but not including)
Third: step, default 1. The step between each returned element
If a fourth, fifth and so on arguments are given, they change the step for each returned element. As first derivative, second derivative.
Output:
If one argument: returns the array (0 .. x-1)
If two arguments: returns the array (x .. y-1)
If three arguments: The default step is 1. Use a third argument to use a different step.
Examples:
print join ",", range(11); # prints 0,1,2,3,4,5,6,7,8,9,10 (but not 11)
print join ",", range(2,11); # 2,3,4,5,6,7,8,9,10 (but not 11)
print join ",", range(11,2,-1); # 11,10,9,8,7,6,5,4,3
print join ",", range(2,11,3); # 2,5,8
print join ",", range(11,2,-3); # 11,8,5
print join ",", range(11,2,+3); # prints nothing
print join ", ",range(2,11,1,0.1); # 2, 3, 4.1, 5.3, 6.6, 8, 9.5 adds 0.1 to step each time
print join ", ",range(2,11,1,0.1,-0.01); # 2, 3, 4.1, 5.29, 6.56, 7.9, 9.3, 10.75Note: In the Python language and others, range is a build in iterator (a generator), not an array. This saves memory for large sets and sometimes time. Use range in List::Gen to get a similar lazy generator in Perl.
permutations
How many ways (permutations) can six people be placed around a table:
If one person: one
If two persons: two (they can swap places)
If three persons: six
If four persons: 24
If five persons: 120
If six persons: 720The formula is x! where the postfix unary operator !, also known as faculty is defined like: x! = x * (x-1) * (x-2) ... * 1. Example: 5! = 5 * 4 * 3 * 2 * 1 = 120.Run this to see the 100 first n!
perl -MAcme::Tools -le'$i=big(1);print "$_!=",$i*=$_ for 1..100'
1! = 1
2! = 2
3! = 6
4! = 24
5! = 120
6! = 720
7! = 5040
8! = 40320
9! = 362880
10! = 3628800
.
.
.
100! = 93326215443944152681699238856266700490715968264381621468592963895217599993229915608941463976156518286253697920827223758251185210916864000000000000000000000000permutations() takes a list and return a list of arrayrefs for each of the permutations of the input list:
permutations('a','b'); #returns (['a','b'],['b','a'])
permutations('a','b','c'); #returns (['a','b','c'],['a','c','b'],
# ['b','a','c'],['b','c','a'],
# ['c','a','b'],['c','b','a'])Up to five input arguments permutations() is probably as fast as it can be in this pure perl implementation (see source). For more than five, it could be faster. How fast is it now: Running with different n, this many time took that many seconds:
n times seconds
-- ------- ---------
2 100000 0.32
3 10000 0.09
4 10000 0.33
5 1000 0.18
6 100 0.27
7 10 0.21
8 1 0.17
9 1 1.63
10 1 17.00If the first argument is a coderef, that sub will be called for each permutation and the return from those calls with be the real return from permutations(). For example this:
print for permutations(sub{join"",@_},1..3);...will print the same as:
print for map join("",@$_), permutations(1..3);...but the first of those two uses less RAM if 3 has been say 9. Changing 3 with 10, and many computers hasn't enough memory for the latter.
The examples prints:
123
132
213
231
312
321If you just want to say calculate something on each permutation, but is not interested in the list of them, you just don't take the return. That is:
my $ant;
permutations(sub{$ant++ if $_[-1]>=$_[0]*2},1..9);...is the same as:
$$_[-1]>=$$_[0]*2 and $ant++ for permutations(1..9);...but the first uses next to nothing of memory compared to the latter. They have about the same speed. (The examples just counts the permutations where the last number is at least twice as large as the first)
permutations() was created to find all combinations of a persons name. This is useful in "fuzzy" name searches with String::Similarity if you can not be certain what is first, middle and last names. In foreign or unfamiliar names it can be difficult to know that.
cart
Cartesian product
Easy usage:
Input: two or more arrayrefs with accordingly x, y, z and so on number of elements.
Output: An array of x * y * z number of arrayrefs. The arrays being the cartesian product of the input arrays.
It can be useful to think of this as joins in SQL. In select statements with more tables behind from, but without any where condition to join the tables.
Advanced usage, with condition(s):
Input:
- Either two or more arrayrefs with x, y, z and so on number of elements.
- Or coderefs to subs containing condition checks. Somewhat like where conditions in SQL.
Output: An array of x * y * z number of arrayrefs (the cartesian product) minus the ones that did not fulfill the condition(s).
This of is as joins with one or more where conditions as coderefs.
The coderef input arguments can be placed last or among the array refs to save both runtime and memory if the conditions depend on arrays further back.
Examples, this:
for(cart(\@a1,\@a2,\@a3)){
my($a1,$a2,$a3) = @$_;
print "$a1,$a2,$a3\n";
}Prints the same as this:
for my $a1 (@a1){
for my $a2 (@a2){
for my $a3 (@a3){
print "$a1,$a2,$a3\n";
}
}
}And this: (with a condition: the sum of the first two should be dividable with 3)
for( cart( \@a1, \@a2, sub{sum(@$_)%3==0}, \@a3 ) ) {
my($a1,$a2,$a3)=@$_;
print "$a1,$a2,$a3\n";
}Prints the same as this:
for my $a1 (@a1){
for my $a2 (@a2){
next if 0==($a1+$a2)%3;
for my $a3 (@a3){
print "$a1,$a2,$a3\n";
}
}
}Examples, from the tests:
my @a1 = (1,2);
my @a2 = (10,20,30);
my @a3 = (100,200,300,400);
my $s = join"", map "*".join(",",@$_), cart(\@a1,\@a2,\@a3);
ok( $s eq "*1,10,100*1,10,200*1,10,300*1,10,400*1,20,100*1,20,200"
."*1,20,300*1,20,400*1,30,100*1,30,200*1,30,300*1,30,400"
."*2,10,100*2,10,200*2,10,300*2,10,400*2,20,100*2,20,200"
."*2,20,300*2,20,400*2,30,100*2,30,200*2,30,300*2,30,400");
$s=join"",map "*".join(",",@$_), cart(\@a1,\@a2,\@a3,sub{sum(@$_)%3==0});
ok( $s eq "*1,10,100*1,10,400*1,20,300*1,30,200*2,10,300*2,20,200*2,30,100*2,30,400");Hash-mode returns hashrefs instead of arrayrefs:
@cards=cart( #100 decks of 52 cards
deck => [1..100],
value => [qw/2 3 4 5 6 7 8 9 10 J Q K A/],
col => [qw/heart diamond club star/],
);
for my $card ( mix(@cards) ) {
print "From deck number $$card{deck} we got $$card{value} $$card{col}\n";
}reduce
From: Why Functional Programming Matters: http://www.md.chalmers.se/~rjmh/Papers/whyfp.pdf
http://www.md.chalmers.se/~rjmh/Papers/whyfp.html
DON'T TRY THIS AT HOME, C PROGRAMMERS.
sub reduce (&@) {
my ($proc, $first, @rest) = @_;
return $first if @rest == 0;
local ($a, $b) = ($first, reduce($proc, @rest));
return $proc->();
}Many functions can then be implemented with very little code. Such as:
sub mean { (reduce {$a + $b} @_) / @_ }pivot
Resembles the pivot table function in Excel.
pivot() is used to spread out a slim and long table to a visually improved layout.
For instance spreading out the results of group by-selects from SQL:
pivot( arrayref, columnname1, columnname2, ...)
pivot( ref_to_array_of_arrayrefs, @list_of_names_to_down_fields )The first argument is a ref to a two dimensional table.
The rest of the arguments is a list which also signals the number of columns from left in each row that is ending up to the left of the data table, the rest ends up at the top and the last element of each row ends up as data.
top1 top1 top1 top1
left1 left2 left3 top2 top2 top2 top2
----- ----- ----- ---- ---- ---- ----
data data data data
data data data data
data data data dataExample:
my @table=(
["1997","Gerd", "Weight", "Summer",66],
["1997","Gerd", "Height", "Summer",170],
["1997","Per", "Weight", "Summer",75],
["1997","Per", "Height", "Summer",182],
["1997","Hilde","Weight", "Summer",62],
["1997","Hilde","Height", "Summer",168],
["1997","Tone", "Weight", "Summer",70],
["1997","Gerd", "Weight", "Winter",64],
["1997","Gerd", "Height", "Winter",158],
["1997","Per", "Weight", "Winter",73],
["1997","Per", "Height", "Winter",180],
["1997","Hilde","Weight", "Winter",61],
["1997","Hilde","Height", "Winter",164],
["1997","Tone", "Weight", "Winter",69],
["1998","Gerd", "Weight", "Summer",64],
["1998","Gerd", "Height", "Summer",171],
["1998","Per", "Weight", "Summer",76],
["1998","Per", "Height", "Summer",182],
["1998","Hilde","Weight", "Summer",62],
["1998","Hilde","Height", "Summer",168],
["1998","Tone", "Weight", "Summer",70],
["1998","Gerd", "Weight", "Winter",64],
["1998","Gerd", "Height", "Winter",171],
["1998","Per", "Weight", "Winter",74],
["1998","Per", "Height", "Winter",183],
["1998","Hilde","Weight", "Winter",62],
["1998","Hilde","Height", "Winter",168],
["1998","Tone", "Weight", "Winter",71],
);.
my @reportA=pivot(\@table,"Year","Name");
print "\n\nReport A\n\n".tablestring(\@reportA);Will print:
Report A
Year Name Height Height Weight Weight
Summer Winter Summer Winter
---- ----- ------ ------ ------ ------
1997 Gerd 170 158 66 64
1997 Hilde 168 164 62 61
1997 Per 182 180 75 73
1997 Tone 70 69
1998 Gerd 171 171 64 64
1998 Hilde 168 168 62 62
1998 Per 182 183 76 74
1998 Tone 70 71.
my @reportB=pivot([map{$_=[@$_[0,3,2,1,4]]}(@t=@table)],"Year","Season");
print "\n\nReport B\n\n".tablestring(\@reportB);Will print:
Report B
Year Season Height Height Height Weight Weight Weight Weight
Gerd Hilde Per Gerd Hilde Per Tone
---- ------ ------ ------ ----- ----- ------ ------ ------
1997 Summer 170 168 182 66 62 75 70
1997 Winter 158 164 180 64 61 73 69
1998 Summer 171 168 182 64 62 76 70
1998 Winter 171 168 183 64 62 74 71.
my @reportC=pivot([map{$_=[@$_[1,2,0,3,4]]}(@t=@table)],"Name","Attributt");
print "\n\nReport C\n\n".tablestring(\@reportC);Will print:
Report C
Name Attributt 1997 1997 1998 1998
Summer Winter Summer Winter
----- --------- ------ ------ ------ ------
Gerd Height 170 158 171 171
Gerd Weight 66 64 64 64
Hilde Height 168 164 168 168
Hilde Weight 62 61 62 62
Per Height 182 180 182 183
Per Weight 75 73 76 74
Tone Weight 70 69 70 71.
my @reportD=pivot([map{$_=[@$_[1,2,0,3,4]]}(@t=@table)],"Name");
print "\n\nReport D\n\n".tablestring(\@reportD);Will print:
Report D
Name Height Height Height Height Weight Weight Weight Weight
1997 1997 1998 1998 1997 1997 1998 1998
Summer Winter Summer Winter Summer Winter Summer Winter
----- ------ ------ ------ ------ ------ ------ ------ ------
Gerd 170 158 171 171 66 64 64 64
Hilde 168 164 168 168 62 61 62 62
Per 182 180 182 183 75 73 76 74
Tone 70 69 70 71Options:
Options to sort differently and show sums and percents are available. (...MORE DOC ON THAT LATER...)
See also Data::Pivot
tablestring
Input: a reference to an array of arrayrefs -- a two dimensional table of strings and numbers
Output: a string containing the textual table -- a string of two or more lines
The first arrayref in the list refers to a list of either column headings (scalar) or ... (...more later...)
In this output table:
- the columns will not be wider than necessary by its widest value (any <html>-tags are removed in every internal width-calculation)
- multi-lined cell values are handled also
- and so are html-tags, if the output is to be used inside <pre>-tags on a web page.
- columns with just numeric values are right justified (header row excepted)
Example:
print tablestring([
[qw/AA BB CCCC/],
[123,23,"d"],
[12,23,34],
[77,88,99],
["lin\nes",12,"asdff\nfdsa\naa"],[0,22,"adf"]
]);Prints this string of 11 lines:
AA BB CCCC
--- -- -----
123 23 d
12 23 34
77 8 99
lin 12 asdff
es fdsa
aa
10 22 adfAs you can see, rows containing multi-lined cells gets an empty line before and after the row to separate it more clearly.
serialize
Returns a data structure as a string. See also Data::Dumper (serialize was created long time ago before Data::Dumper appeared on CPAN, before CPAN even...)
Input: One to four arguments.
First argument: A reference to the structure you want.
Second argument: (optional) The name the structure will get in the output string. If second argument is missing or is undef or '', it will get no name in the output.
Third argument: (optional) The string that is returned is also put into a created file with the name given in this argument. Putting a > char in from of the filename will append that file instead. Use '' or undef to not write to a file if you want to use a fourth argument.
Fourth argument: (optional) A number signalling the depth on which newlines is used in the output. The default is infinite (some big number) so no extra newlines are output.
Output: A string containing the perl-code definition that makes that data structure. The input reference (first input argument) can be to an array, hash or a string. Those can contain other refs and strings in a deep data structure.
Limitations:
- Code refs are not handled (just returns sub{die()})
- Regex, class refs and circular recursive structures are also not handled.
Examples:
$a = 'test';
@b = (1,2,3);
%c = (1=>2, 2=>3, 3=>5, 4=>7, 5=>11);
%d = (1=>2, 2=>3, 3=>\5, 4=>7, 5=>11, 6=>[13,17,19,{1,2,3,'asdf\'\\\''}],7=>'x');
print serialize(\$a,'a');
print serialize(\@b,'tab');
print serialize(\%c,'c');
print serialize(\%d,'d');
print serialize(\("test'n roll",'brb "brb"'));
print serialize(\%d,'d',undef,1);Prints accordingly:
$a='test';
@tab=('1','2','3');
%c=('1','2','2','3','3','5','4','7','5','11');
%d=('1'=>'2','2'=>'3','3'=>\'5','4'=>'7','5'=>'11','6'=>['13','17','19',{'1'=>'2','3'=>'asdf\'\\\''}]);
('test\'n roll','brb "brb"');
%d=('1'=>'2',
'2'=>'3',
'3'=>\'5',
'4'=>'7',
'5'=>'11',
'6'=>['13','17','19',{'1'=>'2','3'=>'asdf\'\\\''}],
'7'=>'x');Areas of use:
- Debugging (first and foremost)
- Storing arrays and hashes and data structures of those on file, database or sending them over the net
- eval earlier stored string to get back the data structure
Be aware of the security implications of evaling a perl code string stored somewhere that unauthorized users can change them! You are probably better of using YAML::Syck or Storable without enabling the CODE-options if you have such security issues. More on decompiling Perl-code: Storable or B::Deparse.
dserialize
Debug-serialize, dumping data structures for you to look at.
Same as serialize() but the output is given a newline every 80th character. (Every 80th or whatever $Acme::Tools::Dserialize_width contains)
sys
Call instead of system if you want die (Carp::croak) when something fails.
sub sys($){my$s=shift;system($s)==0 or croak"ERROR: sys($s) ($!) ($?)"}recursed
Returns true or false (actually 1 or 0) depending on whether the current sub has been called by itself or not.
sub xyz
{
xyz() if not recursed;
}JUST FOR FUN
brainfuck
Input: one or two arguments
First argument: a string, source code of the brainfuck language. String containing the eight charachters + - < > [ ] . , Every other char is ignored silently.
Second argument: if the source code contains commas (,) the second argument is the input characters in a string.
Output: The resulting output from the program.
Example:
print brainfuck(<<""); #prints "Hallo Verden!\n"
++++++++++[>+++++++>++++++++++>+++>+<<<<-]>++.>---.+++++++++++..+++.>++.<<++++++++++++++
.>----------.+++++++++++++.--------------.+.+++++++++.>+.>.See http://en.wikipedia.org/wiki/Brainfuck
brainfuck2perl
Just as "brainfuck" but instead it return the perl code to which the brainfuck code is translated. Just eval() this perl code to run.
Example:
print brainfuck2perl('>++++++++[<++++++++>-]<++++++++.>++++++[<++++++>-]<---.');Prints this string:
my($c,$o,@b)=(0); sub out{$o.=chr($b[$c]) for 1..$_[0]||1}
++$c;++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];
while($b[$c]){--$c;++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];
++$b[$c];++$c;--$b[$c];}--$c;++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];
++$b[$c];++$b[$c];out;++$c;++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];
while($b[$c]){--$c;++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$b[$c];++$c;--$b[$c];}
--$c;--$b[$c];--$b[$c];--$b[$c];out;$o;brainfuck2perl_optimized
Just as "brainfuck2perl" but optimizes the perl code. The same example as above with brainfuck2perl_optimized returns this equivalent but shorter perl code:
$b[++$c]+=8;while($b[$c]){$b[--$c]+=8;--$b[++$c]}$b[--$c]+=8;out;$b[++$c]+=6;
while($b[$c]){$b[--$c]+=6;--$b[++$c]}$b[--$c]-=3;out;$o;BLOOM FILTER SUBROUTINES
Bloom filters can be used to check whether an element (a string) is a member of a large set using much less memory or disk space than other data structures. Trading speed and accuracy for memory usage. While risking false positives, Bloom filters have a very strong space advantage over other data structures for representing sets.
In the example below, a set of 100000 phone numbers (or any string of any length) can be "stored" in just 91230 bytes if you accept that you can only check the data structure for existence of a string and accept false positives with an error rate of 0.03 (that is three percent, error rates are given in numbers larger than 0 and smaller than 1).
You can not retrieve the strings in the set without using "brute force" methods and even then you would get slightly more strings than you put in because of the error rate inaccuracy.
Bloom Filters have many uses.
See also: http://en.wikipedia.org/wiki/Bloom_filter
See also: Bloom::Filter
bfinit
Initialize a new Bloom Filter:
my $bf = bfinit( error_rate=>0.01, capacity=>100000 );The same:
my $bf = bfinit( 0.01, 100000 );since two arguments is interpreted as error_rate and capacity accordingly.
bfadd
bfadd($bf, $_) for @phone_numbers; # Adding strings one at a time
bfadd($bf, @phone_numbers); # ...or all at once (faster)Returns 1 on success. Dies (croaks) if more strings than capacity is added.
bfcheck
my $phone_number="97713246";
if ( bfcheck($bf, $phone_number) ) {
print "Yes, $phone_number was PROBABLY added\n";
}
else{
print "No, $phone_number was DEFINITELY NOT added\n";
}Returns true if $phone_number exists in @phone_numbers.
Returns false most of the times, but sometimes true*), if $phone_number doesn't exists in @phone_numbers.
*) This is called a false positive.
Checking more than one key:
@bools = bfcheck($bf, @keys); # or ...
@bools = bfcheck($bf, \@keys); # better, uses less memory if @keys is largeReturns an array the same size as @keys where each element is true or false accordingly.
bfgrep
Same as bfcheck except it returns the keys that exists in the bloom filter
@found = bfgrep($bf, @keys); # or ...
@found = bfgrep($bf, \@keys); # better, uses less memory if @keys is large, or ...
@found = grep bfcheck($bf,$_), @keys; # same but slowerbfgrepnot
Same as bfgrep except it returns the keys that do NOT exists in the bloom filter:
@not_found = bfgrepnot($bf, @keys); # or ...
@not_found = bfgrepnot($bf, \@keys); # better, uses less memory if @keys is large, or ...
@not_found = grep !bfcheck($bf,$_), @keys); # same but slowerbfdelete
Deletes from a counting bloom filter.
To enable deleting be sure to initialize the bloom filter with the numeric counting_bits argument. The number of bits could be 2 or 3*) for small filters with a small capacity (a small number of keys), but setting the number to 4 ensures that even very large filters with very small error rates would not overflow.
*) Acme::Tools do not currently support counting_bits => 3 so 4 and 8 are the only practical alternatives where 8 is almost always overkill.
my $bf=bfinit(
error_rate => 0.001,
capacity => 10000000,
counting_bits => 4 # power of 2, that is 2, 4, 8, 16 or 32
);
bfadd( $bf, @unique_phone_numbers);
bfdelete($bf, @unique_phone_numbers);Example: examine the frequency of the counters with 4 bit counters and 4 million keys:
my $bf=bfinit( error_rate=>0.001, capacity=>4e6, counting_bits=>4 );
bfadd($bf,[1e3*$_+1 .. 1e3*($_+1)]) for 0..4000-1; # adding 4 million keys one thousand at a time
my %c; $c{vec($$bf{filter},$_,$$bf{counting_bits})}++ for 0..$$bf{filterlength}-1;
printf "%8d counters = %d\n",$c{$_},$_ for sort{$a<=>$b}keys%c;The output:
28689562 counters = 0
19947673 counters = 1
6941082 counters = 2
1608250 counters = 3
280107 counters = 4
38859 counters = 5
4533 counters = 6
445 counters = 7
46 counters = 8
1 counters = 9Even after the error_rate is changed from 0.001 to a percent of that, 0.00001, the limit of 16 (4 bits) is still far away:
47162242 counters = 0
33457237 counters = 1
11865217 counters = 2
2804447 counters = 3
497308 counters = 4
70608 counters = 5
8359 counters = 6
858 counters = 7
65 counters = 8
4 counters = 9In algorithmic terms the number of bits needed is ln of ln of n. Thats why 4 bits (counters up to 15) is "always" good enough except for extremely large capasities or extremely small error rates. (Except when adding the same key many times, which should be avoided, and Acme::Tools::bfadd do not check for that, perhaps in future versions).
Bloom filters of the counting type are not very space efficient: The tables above shows that 84%-85% of the counters are 0 or 1. This means most bits are zero-bits. This doesn't have to be a problem if a counting bloom filter is used to be sent over slow networks because they are very compressable by common compression tools like gzip or Compress::Zlib and such.
Deletion of non-existing keys makes bfdelete die (croak).
bfdelete
Deletes from a counting bloom filter:
bfdelete($bf, @keys);
bfdelete($bf, \@keys);Returns $bf after deletion.
Croaks (dies) on deleting a non-existing key or deleting from an previouly overflown counter in a counting bloom filter.
bfaddbf
Adds another bloom filter to a bloom filter.
Bloom filters has the proberty that bit-wise OR-ing the bit-filters of two filters with the same capacity and the same number and type of hash functions, adds the filters:
my $bf1=bfinit(error_rate=>0.01,capacity=>$cap,keys=>[1..500]);
my $bf2=bfinit(error_rate=>0.01,capacity=>$cap,keys=>[501..1000]);
bfaddbf($bf1,$bf2);
print "Yes!" if bfgrep($bf1, 1..1000) == 1000;Prints yes since bfgrep now returns an array of all the 1000 elements.
Croaks if the filters are of different dimensions.
Works for counting bloom filters as well (counting_bits=>4 e.g.)
bfsum
Returns the number of 1's in the filter.
my $percent=100*bfsum($bf)/$$bf{filterlength};
printf "The filter is %.1f%% filled\n",$percent; #prints 50.0% or so if filled to capacitySums the counters for counting bloom filters (much slower than for non counting).
bfdimensions
Input, two numeric arguments: Capacity and error_rate.
Outputs an array of two numbers: m and k.
m = - n * log(p) / log(2)**2 # n = capacity, m = bits in filter (divide by 8 to get bytes)
k = log(1/p) / log(2) # p = error_rate, uses perls internal log() with base e (2.718)...that is: m = the best number of bits in the filter and k = the best number of hash functions optimized for the given capacity (n) and error_rate (p). Note that k is a dependent only of the error_rate. At about two percent error rate the bloom filter needs just the same number of bytes as the number of keys.
Storage (bytes):
Capacity Error-rate Error-rate Error-rate Error-rate Error-rate Error-rate Error-rate Error-rate Error-rate Error-rate Error-rate Error-rate
0.000000001 0.00000001 0.0000001 0.000001 0.00001 0.0001 0.001 0.01 0.02141585 0.1 0.5 0.99
------------- ----------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
10 54.48 48.49 42.5 36.51 30.52 24.53 18.53 12.54 10.56 6.553 2.366 0.5886
100 539.7 479.8 419.9 360 300.1 240.2 180.3 120.4 100.6 60.47 18.6 0.824
1000 5392 4793 4194 3595 2996 2397 1798 1199 1001 599.6 180.9 3.177
10000 5.392e+04 4.793e+04 4.194e+04 3.594e+04 2.995e+04 2.396e+04 1.797e+04 1.198e+04 1e+04 5991 1804 26.71
100000 5.392e+05 4.793e+05 4.193e+05 3.594e+05 2.995e+05 2.396e+05 1.797e+05 1.198e+05 1e+05 5.991e+04 1.803e+04 262
1000000 5.392e+06 4.793e+06 4.193e+06 3.594e+06 2.995e+06 2.396e+06 1.797e+06 1.198e+06 1e+06 5.991e+05 1.803e+05 2615
10000000 5.392e+07 4.793e+07 4.193e+07 3.594e+07 2.995e+07 2.396e+07 1.797e+07 1.198e+07 1e+07 5.991e+06 1.803e+06 2.615e+04
100000000 5.392e+08 4.793e+08 4.193e+08 3.594e+08 2.995e+08 2.396e+08 1.797e+08 1.198e+08 1e+08 5.991e+07 1.803e+07 2.615e+05
1000000000 5.392e+09 4.793e+09 4.193e+09 3.594e+09 2.995e+09 2.396e+09 1.797e+09 1.198e+09 1e+09 5.991e+08 1.803e+08 2.615e+06
10000000000 5.392e+10 4.793e+10 4.193e+10 3.594e+10 2.995e+10 2.396e+10 1.797e+10 1.198e+10 1e+10 5.991e+09 1.803e+09 2.615e+07
100000000000 5.392e+11 4.793e+11 4.193e+11 3.594e+11 2.995e+11 2.396e+11 1.797e+11 1.198e+11 1e+11 5.991e+10 1.803e+10 2.615e+08
1000000000000 5.392e+12 4.793e+12 4.193e+12 3.594e+12 2.995e+12 2.396e+12 1.797e+12 1.198e+12 1e+12 5.991e+11 1.803e+11 2.615e+09
Error rate: 0.99 Hash functions: 1
Error rate: 0.5 Hash functions: 1
Error rate: 0.1 Hash functions: 3
Error rate: 0.0214158522653385 Hash functions: 6
Error rate: 0.01 Hash functions: 7
Error rate: 0.001 Hash functions: 10
Error rate: 0.0001 Hash functions: 13
Error rate: 0.00001 Hash functions: 17
Error rate: 0.000001 Hash functions: 20
Error rate: 0.0000001 Hash functions: 23
Error rate: 0.00000001 Hash functions: 27
Error rate: 0.000000001 Hash functions: 30bfstore
Storing and retrieving bloom filters to and from disk uses Storables store and retrieve. This:
bfstore($bf,'filename.bf');It the same as:
use Storable qw(store retrieve);
...
store($bf,'filename.bf');bfretrieve
This:
my $bf=bfretrieve('filename.bf');Or this:
my $bf=bfinit('filename.bf');Is the same as:
use Storable qw(store retrieve);
my $bf=retrieve('filename.bf');bfclone
Deep copies the bloom filter data structure. (Which btw is not very deep, two levels at most)
This:
my $bfc = bfclone($bf);Works just as:
use Storable;
my $bfc=Storable::dclone($bf);Object oriented interface to bloom filters
use Acme::Tools;
my $bf=new Acme::Tools::BloomFilter(0.1,1000); # the same as bfinit, see bfinit above
print ref($bf),"\n"; # prints Acme::Tools::BloomFilter
$bf->add(@keys);
$bf->check($keys[0]) and print "ok\n"; # prints ok
$bf->grep(\@keys)==@keys and print "ok\n"; # prints ok
$bf->store('filename.bf');
my $bf2=bfretrieve('filename.bf');
$bf2->check($keys[0]) and print "ok\n"; # still ok
$bf2=$bf->clone();To instantiate a previously stored bloom filter:
my $bf = Acme::Tools::BloomFilter->new( '/path/to/stored/bloomfilter.bf' );The o.o. interface has the same methods as the bf...-subs without the bf-prefix in the names. The bfretrieve is not available as a method, although bfretrieve, Acme::Tools::bfretrieve and Acme::Tools::BloomFilter::retrieve are synonyms.
Internals and speed
The internal hash-functions are md5( "$key$salt" ) from Digest::MD5.
Since md5 returns 128 bits and most medium to large sized bloom filters need only a 32 bit hash function, the result from md5() are split (unpack-ed) into 4 parts 32 bits each and are treated as if 4 hash functions was called at once (speedup). Using different salts to the key on each md5 results in different hash functions.
Digest::SHA512 would have been even better since it returns more bits, if it werent for the fact that it's much slower than Digest::MD5.
String::CRC32::crc32 is faster than Digest::MD5, but not 4 times faster:
time perl -e'use Digest::MD5 qw(md5);md5("asdf$_") for 1..10e6' #5.56 sec
time perl -e'use String::CRC32;crc32("asdf$_") for 1..10e6' #2.79 sec, faster but not per bit
time perl -e'use Digest::SHA qw(sha512);sha512("asdf$_") for 1..10e6' #36.10 sec, too slow (sha1, sha224, sha256 and sha384 too)Md5 seems to be an ok choice both for speed and avoiding collitions due to skewed data keys.
Theory and math behind bloom filters
http://www.internetmathematics.org/volumes/1/4/Broder.pdf
http://blogs.sun.com/jrose/entry/bloom_filters_in_a_nutshell
http://pages.cs.wisc.edu/~cao/papers/summary-cache/node8.html
See also Scaleable Bloom Filters: http://gsd.di.uminho.pt/members/cbm/ps/dbloom.pdf (not implemented in Acme::Tools)
...and perhaps http://intertrack.naist.jp/Matsumoto_IEICE-ED200805.pdf
HISTORY
Release history
0.16 Feb 2015 bigr, bound, cpad, isnum, parta, parth, read_conf, resolve_equation,
roman2int, trim. Improved: conv (numbers, currency), range ("derivatives")
0.15 Nov 2014 Improved doc
0.14 Nov 2014 New subs, improved tests and doc
0.13 Oct 2010 Non-linux test issue, resolve. improved: bloom filter, tests, doc
0.12 Oct 2010 Improved tests, doc, bloom filter, random_gauss, bytes_readable
0.11 Dec 2008 Improved doc
0.10 Dec 2008SEE ALSO
AUTHOR
Kjetil Skotheim, <kjetil.skotheim@gmail.com>
COPYRIGHT AND LICENSE
1995-2015, Kjetil Skotheim
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
1 POD Error
The following errors were encountered while parsing the POD:
- Around line 520:
Non-ASCII character seen before =encoding in 'µm'. Assuming CP1252