/ 
Paws-0.46
River stage two • 9 direct dependents • 11 total dependents
/ Paws::MediaConvert::Eac3Settings

NAME

Paws::MediaConvert::Eac3Settings

USAGE

This class represents one of two things:

Arguments in a call to a service

Use the attributes of this class as arguments to methods. You shouldn't make instances of this class. Each attribute should be used as a named argument in the calls that expect this type of object.

As an example, if Att1 is expected to be a Paws::MediaConvert::Eac3Settings object:

$service_obj->Method(Att1 => { AttenuationControl => $value, ..., SurroundMode => $value  });

Results returned from an API call

Use accessors for each attribute. If Att1 is expected to be an Paws::MediaConvert::Eac3Settings object:

$result = $service_obj->Method(...);
$result->Att1->AttenuationControl

DESCRIPTION

Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.

ATTRIBUTES

AttenuationControl => Str

If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.

Bitrate => Int

Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.

BitstreamMode => Str

Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

CodingMode => Str

Dolby Digital Plus coding mode. Determines number of channels.

DcFilter => Str

Activates a DC highpass filter for all input channels.

Dialnorm => Int

Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.

DynamicRangeCompressionLine => Str

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

DynamicRangeCompressionRf => Str

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

LfeControl => Str

When encoding 3/2 audio, controls whether the LFE channel is enabled

LfeFilter => Str

Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.

LoRoCenterMixLevel => Num

Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).

LoRoSurroundMixLevel => Num

Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).

LtRtCenterMixLevel => Num

Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).

LtRtSurroundMixLevel => Num

Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).

MetadataControl => Str

When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.

PassthroughControl => Str

When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.

PhaseControl => Str

Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.

SampleRate => Int

This value is always 48000. It represents the sample rate in Hz.

StereoDownmix => Str

Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).

SurroundExMode => Str

When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.

SurroundMode => Str

When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.

SEE ALSO

This class forms part of Paws, describing an object used in Paws::MediaConvert

BUGS and CONTRIBUTIONS

The source code is located here: https://github.com/pplu/aws-sdk-perl

Please report bugs to: https://github.com/pplu/aws-sdk-perl/issues