NAME

Bio::MAGE::ArrayDesign::PhysicalArrayDesign - Class for the MAGE-OM API

SYNOPSIS

use Bio::MAGE::ArrayDesign::PhysicalArrayDesign

# creating an empty instance
my $physicalarraydesign = Bio::MAGE::ArrayDesign::PhysicalArrayDesign->new();

# creating an instance with existing data
my $physicalarraydesign = Bio::MAGE::ArrayDesign::PhysicalArrayDesign->new(
      numberOfFeatures=>$numberoffeatures_val,
      version=>$version_val,
      name=>$name_val,
      identifier=>$identifier_val,
      auditTrail=>\@audit_list,
      propertySets=>\@namevaluetype_list,
      surfaceType=>$ontologyentry_ref,
      designProviders=>\@contact_list,
      protocolApplications=>\@protocolapplication_list,
      reporterGroups=>\@reportergroup_list,
      zoneGroups=>\@zonegroup_list,
      featureGroups=>\@featuregroup_list,
      descriptions=>\@description_list,
      security=>$security_ref,
      compositeGroups=>\@compositegroup_list,
);


# 'numberOfFeatures' attribute
my $numberOfFeatures_val = $physicalarraydesign->numberOfFeatures(); # getter
$physicalarraydesign->numberOfFeatures($value); # setter

# 'version' attribute
my $version_val = $physicalarraydesign->version(); # getter
$physicalarraydesign->version($value); # setter

# 'name' attribute
my $name_val = $physicalarraydesign->name(); # getter
$physicalarraydesign->name($value); # setter

# 'identifier' attribute
my $identifier_val = $physicalarraydesign->identifier(); # getter
$physicalarraydesign->identifier($value); # setter


# 'auditTrail' association
my $audit_array_ref = $physicalarraydesign->auditTrail(); # getter
$physicalarraydesign->auditTrail(\@audit_list); # setter

# 'propertySets' association
my $namevaluetype_array_ref = $physicalarraydesign->propertySets(); # getter
$physicalarraydesign->propertySets(\@namevaluetype_list); # setter

# 'surfaceType' association
my $ontologyentry_ref = $physicalarraydesign->surfaceType(); # getter
$physicalarraydesign->surfaceType($ontologyentry_ref); # setter

# 'designProviders' association
my $contact_array_ref = $physicalarraydesign->designProviders(); # getter
$physicalarraydesign->designProviders(\@contact_list); # setter

# 'protocolApplications' association
my $protocolapplication_array_ref = $physicalarraydesign->protocolApplications(); # getter
$physicalarraydesign->protocolApplications(\@protocolapplication_list); # setter

# 'reporterGroups' association
my $reportergroup_array_ref = $physicalarraydesign->reporterGroups(); # getter
$physicalarraydesign->reporterGroups(\@reportergroup_list); # setter

# 'zoneGroups' association
my $zonegroup_array_ref = $physicalarraydesign->zoneGroups(); # getter
$physicalarraydesign->zoneGroups(\@zonegroup_list); # setter

# 'featureGroups' association
my $featuregroup_array_ref = $physicalarraydesign->featureGroups(); # getter
$physicalarraydesign->featureGroups(\@featuregroup_list); # setter

# 'descriptions' association
my $description_array_ref = $physicalarraydesign->descriptions(); # getter
$physicalarraydesign->descriptions(\@description_list); # setter

# 'security' association
my $security_ref = $physicalarraydesign->security(); # getter
$physicalarraydesign->security($security_ref); # setter

# 'compositeGroups' association
my $compositegroup_array_ref = $physicalarraydesign->compositeGroups(); # getter
$physicalarraydesign->compositeGroups(\@compositegroup_list); # setter

DESCRIPTION

From the MAGE-OM documentation for the PhysicalArrayDesign class:

A design that is expected to be used to manufacture physical arrays.

INHERITANCE

Bio::MAGE::ArrayDesign::PhysicalArrayDesign has the following superclasses:

Bio::MAGE::ArrayDesign::ArrayDesign

CLASS METHODS

The following methods can all be called without first having an instance of the class via the Bio::MAGE::ArrayDesign::PhysicalArrayDesign->methodname() syntax.

new()

new(%args)

The object constructor new() accepts the following optional named-value style arguments:

numberOfFeatures

Sets the value of the numberOfFeatures attribute (this attribute was inherited from class Bio::MAGE::ArrayDesign::ArrayDesign).
version

Sets the value of the version attribute (this attribute was inherited from class Bio::MAGE::ArrayDesign::ArrayDesign).
name

Sets the value of the name attribute (this attribute was inherited from class Bio::MAGE::Identifiable).
identifier

Sets the value of the identifier attribute (this attribute was inherited from class Bio::MAGE::Identifiable).
auditTrail

Sets the value of the auditTrail association (this association was inherited from class Bio::MAGE::Describable).

The value must be of type: array of Bio::MAGE::AuditAndSecurity::Audit.
propertySets

Sets the value of the propertySets association (this association was inherited from class Bio::MAGE::Extendable).

The value must be of type: array of Bio::MAGE::NameValueType.
surfaceType

Sets the value of the surfaceType association

The value must be of type: instance of Bio::MAGE::Description::OntologyEntry.
designProviders

Sets the value of the designProviders association (this association was inherited from class Bio::MAGE::ArrayDesign::ArrayDesign).

The value must be of type: array of Bio::MAGE::AuditAndSecurity::Contact.
reporterGroups

Sets the value of the reporterGroups association (this association was inherited from class Bio::MAGE::ArrayDesign::ArrayDesign).

The value must be of type: array of Bio::MAGE::ArrayDesign::ReporterGroup.
protocolApplications

Sets the value of the protocolApplications association (this association was inherited from class Bio::MAGE::ArrayDesign::ArrayDesign).

The value must be of type: array of Bio::MAGE::Protocol::ProtocolApplication.
zoneGroups

Sets the value of the zoneGroups association

The value must be of type: array of Bio::MAGE::ArrayDesign::ZoneGroup.
descriptions

Sets the value of the descriptions association (this association was inherited from class Bio::MAGE::Describable).

The value must be of type: array of Bio::MAGE::Description::Description.
featureGroups

Sets the value of the featureGroups association (this association was inherited from class Bio::MAGE::ArrayDesign::ArrayDesign).

The value must be of type: array of Bio::MAGE::ArrayDesign::FeatureGroup.
security

Sets the value of the security association (this association was inherited from class Bio::MAGE::Describable).

The value must be of type: instance of Bio::MAGE::AuditAndSecurity::Security.
compositeGroups

Sets the value of the compositeGroups association (this association was inherited from class Bio::MAGE::ArrayDesign::ArrayDesign).

The value must be of type: array of Bio::MAGE::ArrayDesign::CompositeGroup.

$obj = class->new(%parameters)

The new() method is the class constructor.

Parameters: if given a list of name/value parameters the corresponding slots, attributes, or associations will have their initial values set by the constructor.

Return value: It returns a reference to an object of the class.

Side effects: It invokes the initialize() method if it is defined by the class.

@names = class->get_slot_names()

The get_slot_names() method is used to retrieve the name of all slots defined in a given class.

NOTE: the list of names does not include attribute or association names.

Return value: A list of the names of all slots defined for this class.

Side effects: none

@name_list = get_attribute_names()

returns the list of attribute data members for this class.

@name_list = get_association_names()

returns the list of association data members for this class.

@class_list = get_superclasses()

returns the list of superclasses for this class.

@class_list = get_subclasses()

returns the list of subclasses for this class.

$name = class_name()

Returns the full class name for this class.

$package_name = package_name()

Returns the base package name (i.e. no 'namespace::') of the package that contains this class.

%assns = associations()

returns the association meta-information in a hash where the keys are the association names and the values are Association objects that provide the meta-information for the association.

INSTANCE METHODS

$obj_copy = $obj->new()

When invoked with an existing object reference and not a class name, the new() method acts as a copy constructor - with the new object's initial values set to be those of the existing object.

Parameters: No input parameters are used in the copy constructor, the initial values are taken directly from the object to be copied.

Return value: It returns a reference to an object of the class.

Side effects: It invokes the initialize() method if it is defined by the class.

$obj->set_slots(%parameters)

$obj->set_slots(\@name_list, \@value_list)

The set_slots() method is used to set a number of slots at the same time. It has two different invocation methods. The first takes a named parameter list, and the second takes two array references.

Return value: none

Side effects: will call croak() if a slot_name is used that the class does not define.

@obj_list = $obj->get_slots(@name_list)

The get_slots() method is used to get the values of a number of slots at the same time.

Return value: a list of instance objects

Side effects: none

$val = $obj->set_slot($name,$val)

The set_slot() method sets the slot $name to the value $val

Return value: the new value of the slot, i.e. $val

Side effects: none

$val = $obj->get_slot($name)

The get_slot() method is used to get the values of a number of slots at the same time.

Return value: a single slot value, or undef if the slot has not been initialized.

Side effects: none

ATTRIBUTES

Attributes are simple data types that belong to a single instance of a class. In the Perl implementation of the MAGE-OM classes, the interface to attributes is implemented using separate setter and getter methods for each attribute.

Bio::MAGE::ArrayDesign::PhysicalArrayDesign has the following attribute accessor methods:

numberOfFeatures

Methods for the numberOfFeatures attribute.

From the MAGE-OM documentation:

The number of features for this array

$val = $physicalarraydesign->setNumberOfFeatures($val)

The restricted setter method for the numberOfFeatures attribute.

Input parameters: the value to which the numberOfFeatures attribute will be set

Return value: the current value of the numberOfFeatures attribute

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if too many input parameters are specified

$val = $physicalarraydesign->getNumberOfFeatures()

The restricted getter method for the numberOfFeatures attribute.

Input parameters: none

Return value: the current value of the numberOfFeatures attribute

Side effects: none

Exceptions: will call croak() if any input parameters are specified

version

Methods for the version attribute.

From the MAGE-OM documentation:

The version of this design.

$val = $physicalarraydesign->setVersion($val)

The restricted setter method for the version attribute.

Input parameters: the value to which the version attribute will be set

Return value: the current value of the version attribute

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if too many input parameters are specified

$val = $physicalarraydesign->getVersion()

The restricted getter method for the version attribute.

Input parameters: none

Return value: the current value of the version attribute

Side effects: none

Exceptions: will call croak() if any input parameters are specified

name

Methods for the name attribute.

From the MAGE-OM documentation:

The potentially ambiguous common identifier.

$val = $physicalarraydesign->setName($val)

The restricted setter method for the name attribute.

Input parameters: the value to which the name attribute will be set

Return value: the current value of the name attribute

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if too many input parameters are specified

$val = $physicalarraydesign->getName()

The restricted getter method for the name attribute.

Input parameters: none

Return value: the current value of the name attribute

Side effects: none

Exceptions: will call croak() if any input parameters are specified

identifier

Methods for the identifier attribute.

From the MAGE-OM documentation:

An identifier is an unambiguous string that is unique within the scope (i.e. a document, a set of related documents, or a repository) of its use.

$val = $physicalarraydesign->setIdentifier($val)

The restricted setter method for the identifier attribute.

Input parameters: the value to which the identifier attribute will be set

Return value: the current value of the identifier attribute

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if too many input parameters are specified

$val = $physicalarraydesign->getIdentifier()

The restricted getter method for the identifier attribute.

Input parameters: none

Return value: the current value of the identifier attribute

Side effects: none

Exceptions: will call croak() if any input parameters are specified

ASSOCIATIONS

Associations are references to other classes. Associations in MAGE-OM have a cardinality that determines the minimum and maximum number of instances of the 'other' class that maybe included in the association:

There must be exactly one item in the association, i.e. this is a mandatory data field.
0..1

There may be one item in the association, i.e. this is an optional data field.
1..N

There must be one or more items in the association, i.e. this is a mandatory data field, with list cardinality.
0..N

There may be one or more items in the association, i.e. this is an optional data field, with list cardinality.

Bio::MAGE::ArrayDesign::PhysicalArrayDesign has the following association accessor methods:

auditTrail

Methods for the auditTrail association.

From the MAGE-OM documentation:

A list of Audit instances that track changes to the instance of Describable.

$array_ref = $physicalarraydesign->setAuditTrail($array_ref)

The restricted setter method for the auditTrail association.

Input parameters: the value to which the auditTrail association will be set : a reference to an array of objects of type Bio::MAGE::AuditAndSecurity::Audit

Return value: the current value of the auditTrail association : a reference to an array of objects of type Bio::MAGE::AuditAndSecurity::Audit

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if too many input parameters are specified, or if $array_ref is not a reference to an array class Bio::MAGE::AuditAndSecurity::Audit instances

$array_ref = $physicalarraydesign->getAuditTrail()

The restricted getter method for the auditTrail association.

Input parameters: none

Return value: the current value of the auditTrail association : a reference to an array of objects of type Bio::MAGE::AuditAndSecurity::Audit

Side effects: none

Exceptions: will call croak() if any input parameters are specified

$val = $physicalarraydesign->addAuditTrail(@vals)

Because the auditTrail association has list cardinality, it may store more than one value. This method adds the current list of objects in the auditTrail association.

Input parameters: the list of values @vals to add to the auditTrail association. NOTE: submitting a single value is permitted.

Return value: the number of items stored in the slot after adding @vals

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if any of the objects in @vals is not an instance of class Bio::MAGE::AuditAndSecurity::Audit

propertySets

Methods for the propertySets association.

From the MAGE-OM documentation:

Allows specification of name/value pairs. Meant to primarily help in-house, pipeline processing of instances by providing a place for values that aren't part of the specification proper.

$array_ref = $physicalarraydesign->setPropertySets($array_ref)

The restricted setter method for the propertySets association.

Input parameters: the value to which the propertySets association will be set : a reference to an array of objects of type Bio::MAGE::NameValueType

Return value: the current value of the propertySets association : a reference to an array of objects of type Bio::MAGE::NameValueType

Side effects: none

$array_ref = $physicalarraydesign->getPropertySets()

The restricted getter method for the propertySets association.

Input parameters: none

Return value: the current value of the propertySets association : a reference to an array of objects of type Bio::MAGE::NameValueType

Side effects: none

Exceptions: will call croak() if any input parameters are specified

$val = $physicalarraydesign->addPropertySets(@vals)

Because the propertySets association has list cardinality, it may store more than one value. This method adds the current list of objects in the propertySets association.

Input parameters: the list of values @vals to add to the propertySets association. NOTE: submitting a single value is permitted.

Return value: the number of items stored in the slot after adding @vals

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if any of the objects in @vals is not an instance of class Bio::MAGE::NameValueType

surfaceType

Methods for the surfaceType association.

From the MAGE-OM documentation:

The type of surface from a controlled vocabulary that would include terms such as non-absorptive, absorptive, etc.

$val = $physicalarraydesign->setSurfaceType($val)

The restricted setter method for the surfaceType association.

Input parameters: the value to which the surfaceType association will be set : one of the accepted enumerated values.

Return value: the current value of the surfaceType association : one of the accepted enumerated values.

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if too many input parameters are specified, or if $val is not an instance of class Bio::MAGE::Description::OntologyEntry

$val = $physicalarraydesign->getSurfaceType()

The restricted getter method for the surfaceType association.

Input parameters: none

Return value: the current value of the surfaceType association : an instance of type Bio::MAGE::Description::OntologyEntry.

Side effects: none

Exceptions: will call croak() if any input parameters are specified

designProviders

Methods for the designProviders association.

From the MAGE-OM documentation:

The primary contact for information on the array design

$array_ref = $physicalarraydesign->setDesignProviders($array_ref)

The restricted setter method for the designProviders association.

Input parameters: the value to which the designProviders association will be set : a reference to an array of objects of type Bio::MAGE::AuditAndSecurity::Contact

Return value: the current value of the designProviders association : a reference to an array of objects of type Bio::MAGE::AuditAndSecurity::Contact

Side effects: none

$array_ref = $physicalarraydesign->getDesignProviders()

The restricted getter method for the designProviders association.

Input parameters: none

Return value: the current value of the designProviders association : a reference to an array of objects of type Bio::MAGE::AuditAndSecurity::Contact

Side effects: none

Exceptions: will call croak() if any input parameters are specified

$val = $physicalarraydesign->addDesignProviders(@vals)

Because the designProviders association has list cardinality, it may store more than one value. This method adds the current list of objects in the designProviders association.

Input parameters: the list of values @vals to add to the designProviders association. NOTE: submitting a single value is permitted.

Return value: the number of items stored in the slot after adding @vals

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if any of the objects in @vals is not an instance of class Bio::MAGE::AuditAndSecurity::Contact

reporterGroups

Methods for the reporterGroups association.

From the MAGE-OM documentation:

The grouping of like Reporter together. If more than one technology type occurs on the array, such as the mixing of Cloned BioMaterial and Oligos, then there would be multiple ReporterGroups to segregate the technology types.

$array_ref = $physicalarraydesign->setReporterGroups($array_ref)

The restricted setter method for the reporterGroups association.

Input parameters: the value to which the reporterGroups association will be set : a reference to an array of objects of type Bio::MAGE::ArrayDesign::ReporterGroup

Return value: the current value of the reporterGroups association : a reference to an array of objects of type Bio::MAGE::ArrayDesign::ReporterGroup

Side effects: none

$array_ref = $physicalarraydesign->getReporterGroups()

The restricted getter method for the reporterGroups association.

Input parameters: none

Return value: the current value of the reporterGroups association : a reference to an array of objects of type Bio::MAGE::ArrayDesign::ReporterGroup

Side effects: none

Exceptions: will call croak() if any input parameters are specified

$val = $physicalarraydesign->addReporterGroups(@vals)

Because the reporterGroups association has list cardinality, it may store more than one value. This method adds the current list of objects in the reporterGroups association.

Input parameters: the list of values @vals to add to the reporterGroups association. NOTE: submitting a single value is permitted.

Return value: the number of items stored in the slot after adding @vals

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if any of the objects in @vals is not an instance of class Bio::MAGE::ArrayDesign::ReporterGroup

protocolApplications

Methods for the protocolApplications association.

From the MAGE-OM documentation:

Describes the application of any protocols, such as the methodology used to pick oligos, in the design of the array.

$array_ref = $physicalarraydesign->setProtocolApplications($array_ref)

The restricted setter method for the protocolApplications association.

Input parameters: the value to which the protocolApplications association will be set : a reference to an array of objects of type Bio::MAGE::Protocol::ProtocolApplication

Return value: the current value of the protocolApplications association : a reference to an array of objects of type Bio::MAGE::Protocol::ProtocolApplication

Side effects: none

$array_ref = $physicalarraydesign->getProtocolApplications()

The restricted getter method for the protocolApplications association.

Input parameters: none

Return value: the current value of the protocolApplications association : a reference to an array of objects of type Bio::MAGE::Protocol::ProtocolApplication

Side effects: none

Exceptions: will call croak() if any input parameters are specified

$val = $physicalarraydesign->addProtocolApplications(@vals)

Because the protocolApplications association has list cardinality, it may store more than one value. This method adds the current list of objects in the protocolApplications association.

Input parameters: the list of values @vals to add to the protocolApplications association. NOTE: submitting a single value is permitted.

Return value: the number of items stored in the slot after adding @vals

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if any of the objects in @vals is not an instance of class Bio::MAGE::Protocol::ProtocolApplication

zoneGroups

Methods for the zoneGroups association.

From the MAGE-OM documentation:

In the case where the array design is specified by one or more zones, allows specifying where those zones are located.

$array_ref = $physicalarraydesign->setZoneGroups($array_ref)

The restricted setter method for the zoneGroups association.

Input parameters: the value to which the zoneGroups association will be set : a reference to an array of objects of type Bio::MAGE::ArrayDesign::ZoneGroup

Return value: the current value of the zoneGroups association : a reference to an array of objects of type Bio::MAGE::ArrayDesign::ZoneGroup

Side effects: none

$array_ref = $physicalarraydesign->getZoneGroups()

The restricted getter method for the zoneGroups association.

Input parameters: none

Return value: the current value of the zoneGroups association : a reference to an array of objects of type Bio::MAGE::ArrayDesign::ZoneGroup

Side effects: none

Exceptions: will call croak() if any input parameters are specified

$val = $physicalarraydesign->addZoneGroups(@vals)

Because the zoneGroups association has list cardinality, it may store more than one value. This method adds the current list of objects in the zoneGroups association.

Input parameters: the list of values @vals to add to the zoneGroups association. NOTE: submitting a single value is permitted.

Return value: the number of items stored in the slot after adding @vals

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if any of the objects in @vals is not an instance of class Bio::MAGE::ArrayDesign::ZoneGroup

descriptions

Methods for the descriptions association.

From the MAGE-OM documentation:

Free hand text descriptions. Makes available the associations of Description to an instance of Describable.

$array_ref = $physicalarraydesign->setDescriptions($array_ref)

The restricted setter method for the descriptions association.

Input parameters: the value to which the descriptions association will be set : a reference to an array of objects of type Bio::MAGE::Description::Description

Return value: the current value of the descriptions association : a reference to an array of objects of type Bio::MAGE::Description::Description

Side effects: none

$array_ref = $physicalarraydesign->getDescriptions()

The restricted getter method for the descriptions association.

Input parameters: none

Return value: the current value of the descriptions association : a reference to an array of objects of type Bio::MAGE::Description::Description

Side effects: none

Exceptions: will call croak() if any input parameters are specified

$val = $physicalarraydesign->addDescriptions(@vals)

Because the descriptions association has list cardinality, it may store more than one value. This method adds the current list of objects in the descriptions association.

Input parameters: the list of values @vals to add to the descriptions association. NOTE: submitting a single value is permitted.

Return value: the number of items stored in the slot after adding @vals

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if any of the objects in @vals is not an instance of class Bio::MAGE::Description::Description

featureGroups

Methods for the featureGroups association.

From the MAGE-OM documentation:

The grouping of like Features together. Typically for a physical array design, this will be a single grouping of features whose type might be PCR Product or Oligo. If more than one technology type occurs on the array, such as the mixing of Cloned BioMaterial and Oligos, then there would be multiple FeatureGroups to segregate the technology types.

$array_ref = $physicalarraydesign->setFeatureGroups($array_ref)

The restricted setter method for the featureGroups association.

Input parameters: the value to which the featureGroups association will be set : a reference to an array of objects of type Bio::MAGE::ArrayDesign::FeatureGroup

Return value: the current value of the featureGroups association : a reference to an array of objects of type Bio::MAGE::ArrayDesign::FeatureGroup

Side effects: none

$array_ref = $physicalarraydesign->getFeatureGroups()

The restricted getter method for the featureGroups association.

Input parameters: none

Return value: the current value of the featureGroups association : a reference to an array of objects of type Bio::MAGE::ArrayDesign::FeatureGroup

Side effects: none

Exceptions: will call croak() if any input parameters are specified

$val = $physicalarraydesign->addFeatureGroups(@vals)

Because the featureGroups association has list cardinality, it may store more than one value. This method adds the current list of objects in the featureGroups association.

Input parameters: the list of values @vals to add to the featureGroups association. NOTE: submitting a single value is permitted.

Return value: the number of items stored in the slot after adding @vals

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if any of the objects in @vals is not an instance of class Bio::MAGE::ArrayDesign::FeatureGroup

security

Methods for the security association.

From the MAGE-OM documentation:

Information on the security for the instance of the class.

$val = $physicalarraydesign->setSecurity($val)

The restricted setter method for the security association.

Input parameters: the value to which the security association will be set : one of the accepted enumerated values.

Return value: the current value of the security association : one of the accepted enumerated values.

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if too many input parameters are specified, or if $val is not an instance of class Bio::MAGE::AuditAndSecurity::Security

$val = $physicalarraydesign->getSecurity()

The restricted getter method for the security association.

Input parameters: none

Return value: the current value of the security association : an instance of type Bio::MAGE::AuditAndSecurity::Security.

Side effects: none

Exceptions: will call croak() if any input parameters are specified

compositeGroups

Methods for the compositeGroups association.

From the MAGE-OM documentation:

The grouping of like CompositeSequence together. If more than one technology type occurs on the array, such as the mixing of Cloned BioMaterial and Oligos, then there would be multiple CompositeGroups to segregate the technology types.

$array_ref = $physicalarraydesign->setCompositeGroups($array_ref)

The restricted setter method for the compositeGroups association.

Input parameters: the value to which the compositeGroups association will be set : a reference to an array of objects of type Bio::MAGE::ArrayDesign::CompositeGroup

Return value: the current value of the compositeGroups association : a reference to an array of objects of type Bio::MAGE::ArrayDesign::CompositeGroup

Side effects: none

$array_ref = $physicalarraydesign->getCompositeGroups()

The restricted getter method for the compositeGroups association.

Input parameters: none

Return value: the current value of the compositeGroups association : a reference to an array of objects of type Bio::MAGE::ArrayDesign::CompositeGroup

Side effects: none

Exceptions: will call croak() if any input parameters are specified

$val = $physicalarraydesign->addCompositeGroups(@vals)

Because the compositeGroups association has list cardinality, it may store more than one value. This method adds the current list of objects in the compositeGroups association.

Input parameters: the list of values @vals to add to the compositeGroups association. NOTE: submitting a single value is permitted.

Return value: the number of items stored in the slot after adding @vals

Side effects: none

Exceptions: will call croak() if no input parameters are specified, or if any of the objects in @vals is not an instance of class Bio::MAGE::ArrayDesign::CompositeGroup

sub initialize {

my $self = shift;
return 1;

}

SLOTS, ATTRIBUTES, AND ASSOCIATIONS

In the Perl implementation of MAGE-OM classes, there are three types of class data members: slots, attributes, and associations.

SLOTS

This API uses the term slot to indicate a data member of the class that was not present in the UML model and is used for mainly internal purposes - use only if you understand the inner workings of the API. Most often slots are used by generic methods such as those in the XML writing and reading classes.

Slots are implemented using unified getter/setter methods:

$var = $obj->slot_name();: Retrieves the current value of the slot.
$new_var = $obj->slot_name($new_var);: Store $new_var in the slot - the return value is also $new_var.
@names = $obj->get_slot_names(): Returns the list of all slots in the class.

DATA CHECKING: No data type checking is made for these methods.

ATTRIBUTES AND ASSOCIATIONS

The terms attribute and association indicate data members of the class that were specified directly from the UML model.

In the Perl implementation of MAGE-OM classes, association and attribute accessors are implemented using three separate methods:

get*

Retrieves the current value.

NOTE: For associations, if the association has list cardinality, an array reference is returned.

DATA CHECKING: Ensure that no argument is provided.

set*

Sets the current value, replacing any existing value.

NOTE: For associations, if the association has list cardinality, the argument must be an array reference. Because of this, you probably should be using the add* methods.

DATA CHECKING: For attributes, ensure that a single value is provided as the argument. For associations, if the association has list cardinality, ensure that the argument is a reference to an array of instances of the correct MAGE-OM class, otherwise ensure that there is a single argument of the correct MAGE-OM class.

add*

NOTE: Only present in associations with list cardinality.

Appends a list of objects to any values that may already be stored in the association.

DATA CHECKING: Ensure that all arguments are of the correct MAGE-OM class.

GENERIC METHODS

The unified base class of all MAGE-OM classes, Bio::MAGE::Base, provides a set of generic methods that will operate on slots, attributes, and associations:

$val = $obj->get_slot($name)
\@list_ref = $obj->get_slots(@name_list);
$val = $obj->set_slot($name,$val)
$obj->set_slots(%parameters)
$obj->set_slots(\@name_list, \@value_list): See elsewhere in this page for a detailed description of these methods.

BUGS

Please send bug reports to the project mailing list: (mged-mage 'at' lists 'dot' sf 'dot' net)

AUTHOR

Jason E. Stewart (jasons 'at' cpan 'dot' org)

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

SYNOPSIS

DESCRIPTION

INHERITANCE

CLASS METHODS

INSTANCE METHODS

ATTRIBUTES

ASSOCIATIONS

SLOTS, ATTRIBUTES, AND ASSOCIATIONS

SLOTS

ATTRIBUTES AND ASSOCIATIONS

GENERIC METHODS

BUGS

AUTHOR

SEE ALSO

Module Install Instructions