NAME

Apache::PerlSections - Default Handler for Perl sections

Synopsis

<Perl>
@PerlModule = qw(Mail::Send Devel::Peek);

#run the server as whoever starts it
$User  = getpwuid(>) || >;
$Group = getgrgid()) || );

$ServerAdmin = $User;

</Perl>

Description

With <Perl>...</Perl> sections, it is possible to configure your server entirely in Perl.

<Perl> sections can contain any and as much Perl code as you wish. These sections are compiled into a special package whose symbol table mod_perl can then walk and grind the names and values of Perl variables/structures through the Apache core configuration gears.

Block sections such as <Location>..</Location> are represented in a %Location hash, e.g.:

<Perl>
$Location{"/~dougm/"} = {
  AuthUserFile   => '/tmp/htpasswd',
  AuthType       => 'Basic',
  AuthName       => 'test',
  DirectoryIndex => [qw(index.html index.htm)],
  Limit          => {
      "GET POST"    => {
          require => 'user dougm',
      }
  },
};
</Perl>

If an Apache directive can take two or three arguments you may push strings (the lowest number of arguments will be shifted off the @list) or use an array reference to handle any number greater than the minimum for that directive:

push @Redirect, "/foo", "http://www.foo.com/";

push @Redirect, "/imdb", "http://www.imdb.com/";

push @Redirect, [qw(temp "/here" "http://www.there.com")];

Other section counterparts include %VirtualHost, %Directory and %Files.

To pass all environment variables to the children with a single configuration directive, rather than listing each one via PassEnv or PerlPassEnv, a <Perl> section could read in a file and:

push @PerlPassEnv, [$key => $val];

Apache->httpd_conf("PerlPassEnv $key $val");

These are somewhat simple examples, but they should give you the basic idea. You can mix in any Perl code you desire. See eg/httpd.conf.pl and eg/perl_sections.txt in the mod_perl distribution for more examples.

Assume that you have a cluster of machines with similar configurations and only small distinctions between them: ideally you would want to maintain a single configuration file, but because the configurations aren't exactly the same (e.g. the ServerName directive) it's not quite that simple.

<Perl> sections come to rescue. Now you have a single configuration file and the full power of Perl to tweak the local configuration. For example to solve the problem of the ServerName directive you might have this <Perl> section:

<Perl>
$ServerName = `hostname`;
</Perl>

For example if you want to allow personal directories on all machines except the ones whose names start with secure:

<Perl>
$ServerName = `hostname`;
if ($ServerName !~ /^secure/) {
    $UserDir = "public.html";
}
else {
    $UserDir = "DISABLED";
}
</Perl>

`@PerlConfig` and `$PerlConfig`

This array and scalar can be used to introduce literal configuration into the apache configuration. For example:

push @PerlConfig, 'Alias /foo /bar';

Or: $PerlConfig .= "Alias /foo /bar\n";

Configuration Variables

There are a few variables that can be set to change the default behaviour of <Perl> sections.

`$Apache::PerlSections::Save`

Each <Perl> section is evaluated in its unique namespace, by default residing in a sub-namespace of Apache::ReadConfig::, therefore any local variables will end up in that namespace. For example if a <Perl> section happened to be in file /tmp/httpd.conf starting on line 20, the namespace: Apache::ReadConfig::tmp::httpd_conf::line_20 will be used. Now if it had:

<Perl>
  $foo     = 5;
  my $bar  = 6;
  $My::tar = 7;
</Perl>

The local global variable $foo becomes $Apache::ReadConfig::tmp::httpd_conf::line_20::foo, the other variable remain where they are.

By default, the namespace in which <Perl> sections are evaluated is cleared after each block closes. In our example nuking $Apache::ReadConfig::tmp::httpd_conf::line_20::foo, leaving the rest untouched.

By setting $Apache::PerlSections::Save to a true value, the content of those namespaces will be preserved and will be available for inspection by Apache::Status and Apache::PerlSections->dump In our example $Apache::ReadConfig::tmp::httpd_conf::line_20::foo will still be accessible from other perl code, after the <Perl> section was parsed.

PerlSections Dumping

`Apache::PerlSections->dump`

This method will dump out all the configuration variables mod_perl will be feeding to the apache config gears. The output is suitable to read back in via eval.

For example:

<Perl>

$Apache::PerlSections::Save = 1;

$Port = 8529;

$Location{"/perl"} = {
   SetHandler => "perl-script",
   PerlHandler => "Apache::Registry",
   Options => "ExecCGI",
};

@DirectoryIndex = qw(index.htm index.html);

$VirtualHost{"www.foo.com"} = {
   DocumentRoot => "/tmp/docs",
   ErrorLog => "/dev/null",
   Location => {
     "/" => {
       Allowoverride => 'All',
       Order => 'deny,allow',
       Deny  => 'from all',
       Allow => 'from foo.com',
     },
   },
};
</Perl>

<Perl>
print Apache::PerlSections->dump;
</Perl>

This will print something like this:

$Port = 8529;

@DirectoryIndex = (
  'index.htm',
  'index.html'
);

$Location{'/perl'} = (
    PerlHandler => 'Apache::Registry',
    SetHandler => 'perl-script',
    Options => 'ExecCGI'
);

$VirtualHost{'www.foo.com'} = (
    Location => {
      '/' => {
        Deny => 'from all',
        Order => 'deny,allow',
        Allow => 'from foo.com',
        Allowoverride => 'All'
      }
    },
    DocumentRoot => '/tmp/docs',
    ErrorLog => '/dev/null'
);

1;
__END__

It is important to put the call to dump in it's own <Perl> section, otherwise the content of the current <Perl> section will not be dumped.

`Apache::PerlSections->store`

This method will call the dump method, writing the output to a file, suitable to be pulled in via require or do.

Advanced API

mod_perl 2.0 now introduces the same general concept of handlers to <Perl> sections. Apache::PerlSections simply being the default handler for them.

To specify a different handler for a given perl section, an extra handler argument must be given to the section:

<Perl handler="My::PerlSection::Handler" somearg="test1">
  $foo = 1;
  $bar = 2;
</Perl>

And in My/PerlSection/Handler.pm:

sub My::Handler::handler : handler {
    my($self, $parms, $args) = @_;
    #do your thing!
}

So, when that given <Perl> block in encountered, the code within will first be evaluated, then the handler routine will be invoked with 3 arguments:

arg1: $self

self-explanatory

arg2: $parms ( Apache::CmdParms )

$parms is specific for the current Container, for example, you might want to call $parms->server() to get the current server.

arg3: $args ( APR::Table object)

the table object of the section arguments. The 2 guaranteed ones will be:

$args->{'handler'} = 'My::PerlSection::Handler';
$args->{'package'} = 'Apache::ReadConfig';

Other name="value" pairs given on the <Perl> line will also be included.

At this point, it's up to the handler routing to inspect the namespace of the $args->{'package'} and chooses what to do.

The most likely thing to do is to feed configuration data back into apache. To do that, use Apache::Server->add_config("directive"), for example:

$parms->server->add_config("Alias /foo /bar");

Would create a new alias. The source code of Apache::PerlSections is a good place to look for a practical example.

Verifying `<Perl>` Sections

If the <Perl> sections include no code requiring a running mod_perl, it is possible to check those from the command line. But the following trick should be used:

# file: httpd.conf
<Perl>
#!perl

# ... code here ...

__END__
</Perl>

Now you can run:

% perl -c httpd.conf

Bugs

<Perl> directive missing closing '>'

httpd-2.0.47 had a bug in the configuration parser which caused the startup failure with the following error:

Starting httpd:
Syntax error on line ... of /etc/httpd/conf/httpd.conf:
<Perl> directive missing closing '>'     [FAILED]

This has been fixed in httpd-2.0.48. If you can't upgrade to this or a higher version, please add a space before the closing '>' of the opening tag as a workaround. So if you had:

<Perl>
# some code
</Perl>

change it to be:

<Perl >
# some code
</Perl>

<Perl>[...]> was not closed.

On encountering a one-line <Perl> block, httpd's configuration parser will cause a startup failure with an error similar to this one:

Starting httpd:
Syntax error on line ... of /etc/httpd/conf/httpd.conf:
<Perl>use> was not closed.

If you have written a simple one-line <Perl> section like this one :

<Perl>use Apache::DBI;</Perl>

change it to be:

<Perl>
use Apache::DBI;
</Perl>

This is caused by a limitation of httpd's configuration parser and is not likely to be changed to allow one-line block like the example above. Use multi-line blocks instead.

Copyright

mod_perl 2.0 and its core modules are copyrighted under The Apache Software License, Version 2.0.

Authors

The mod_perl development team and numerous contributors.

To install mod_perl, copy and paste the appropriate command in to your terminal.

cpanm

cpanm mod_perl

CPAN shell

perl -MCPAN -e shell
install mod_perl

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

Synopsis

Description

@PerlConfig and $PerlConfig

Configuration Variables

$Apache::PerlSections::Save