Name

App::Sqitch::Target - Sqitch deployment target

Synopsis

my $plan = App::Sqitch::Target->new(
    sqitch => $sqitch,
    name   => 'development',
);
$target->engine->deploy;

Description

App::Sqitch::Target provides collects, in one place, the engine, plan, and file locations required to carry out Sqitch commands. All commands should instantiate a target to work with the plan or database.

Interface

Constructors

new

my $target = App::Sqitch::Target->new( sqitch => $sqitch );

Instantiates and returns an App::Sqitch::Target object. The most important parameters are sqitch, name, and uri. The constructor tries really hard to figure out the proper name and URI during construction. If the uri parameter is passed, this is straight-forward: if no name is passed, name will be set to the stringified format of the URI (minus the password, if present).

Otherwise, when no URI is passed, the name and URI are determined by taking the following steps:

  • If there is no name, get the engine key from --engine or the core.engine configuration option. If no key can be determined, an exception will be thrown.

  • Use the key to look up the target name in the engine.$engine.target configuration option. If none is found, use db:$key:.

  • If the name contains a colon (:), assume it is also the value for the URI.

  • Otherwise, it should be the name of a configured target, so look for a URI in the target.$name.uri configuration option.

As a general rule, then, pass either a target name or URI string in the name parameter, and Sqitch will do its best to find all the relevant target information. And if there is no name or URI, it will try to construct a reasonable default from the command-line options or engine configuration.

all_targets

Returns a list of all the targets defined by the local Sqitch configuration file. Done by examining the configuration object to find all defined targets and engines, as well as the default "core" target. Duplicates are removed and the list returned. This method takes two parameters:

  • sqitch

    An App::Sqitch object. Required.

  • config

    An App::Sqitch::Config object. If not passed, the object stored in the Sqitch object's config attribute will be used.

Accessors

sqitch

my $sqitch = $target->sqitch;

Returns the App::Sqitch object that instantiated the target.

name

target

my $name = $target->name;
$name = $target->target;

The name of the target. If there was no name specified, the URI will be used (minus the password, if there is one).

uri

my $uri = $target->uri;

The URI::db object encapsulating the database connection information.

username

my $username = $target->username;

Returns the target username, if any. The username is looked up from the URI.

password

my $password = $target->password;

Returns the target password, if any. The password is looked up from the URI or the $SQITCH_PASSWORD environment variable.

engine

my $engine = $target->engine;

A App::Sqitch::Engine object to use for database interactions with the target.

registry

my $registry = $target->registry;

The name of the registry used by the database. The value comes from one of these options, searched in this order:

  • --registry

  • target.$name.registry

  • engine.$engine.registry

  • core.registry

  • Engine-specific default

client

my $client = $target->client;

Path to the engine command-line client. The value comes from one of these options, searched in this order:

  • --client

  • target.$name.client

  • engine.$engine.client

  • core.client

  • Engine-and-OS-specific default

top_dir

my $top_dir = $target->top_dir;

The path to the top directory of the project. This directory generally contains the plan file and subdirectories for deploy, revert, and verify scripts. The value comes from one of these options, searched in this order:

  • --top-dir

  • target.$name.top_dir

  • engine.$engine.top_dir

  • core.top_dir

  • .

plan_file

my $plan_file = $target->plan_file;

The path to the plan file. The value comes from one of these options, searched in this order:

  • --plan-file

  • target.$name.plan_file

  • engine.$engine.plan_file

  • core.plan_file

  • $top_dir/sqitch.plan

deploy_dir

my $deploy_dir = $target->deploy_dir;

The path to the deploy directory of the project. This directory contains all of the deploy scripts referenced by changes in the plan_file. The value comes from one of these options, searched in this order:

  • --dir deploy_dir=$deploy_dir

  • target.$name.deploy_dir

  • engine.$engine.deploy_dir

  • core.deploy_dir

  • $top_dir/deploy

revert_dir

my $revert_dir = $target->revert_dir;

The path to the revert directory of the project. This directory contains all of the revert scripts referenced by changes the plan_file. The value comes from one of these options, searched in this order:

  • --dir revert_dir=$revert_dir

  • target.$name.revert_dir

  • engine.$engine.revert_dir

  • core.revert_dir

  • $top_dir/revert

verify_dir

my $verify_dir = $target->verify_dir;

The path to the verify directory of the project. This directory contains all of the verify scripts referenced by changes in the plan_file. The value comes from one of these options, searched in this order:

  • --dir verify_dir=$verify_dir

  • target.$name.verify_dir

  • engine.$engine.verify_dir

  • core.verify_dir

  • $top_dir/verify

reworked_dir

my $reworked_dir = $target->reworked_dir;

The path to the reworked directory of the project. This directory contains subdirectories for reworked deploy, revert, and verify scripts. The value comes from one of these options, searched in this order:

  • --dir reworked_dir=$reworked_dir

  • target.$name.reworked_dir

  • engine.$engine.reworked_dir

  • core.reworked_dir

  • $top_dir

reworked_deploy_dir

my $reworked_deploy_dir = $target->reworked_deploy_dir;

The path to the reworked deploy directory of the project. This directory contains all of the reworked deploy scripts referenced by changes in the plan_file. The value comes from one of these options, searched in this order:

  • --dir reworked_deploy_dir=$reworked_deploy_dir

  • target.$name.reworked_deploy_dir

  • engine.$engine.reworked_deploy_dir

  • core.reworked_deploy_dir

  • $reworked_dir/reworked_deploy

reworked_revert_dir

my $reworked_revert_dir = $target->reworked_revert_dir;

The path to the reworked revert directory of the project. This directory contains all of the reworked revert scripts referenced by changes the plan_file. The value comes from one of these options, searched in this order:

  • --dir reworked_revert_dir=$reworked_revert_dir

  • target.$name.reworked_revert_dir

  • engine.$engine.reworked_revert_dir

  • core.reworked_revert_dir

  • $reworked_dir/reworked_revert

reworked_verify_dir

my $reworked_verify_dir = $target->reworked_verify_dir;

The path to the reworked verify directory of the project. This directory contains all of the reworked verify scripts referenced by changes in the plan_file. The value comes from one of these options, searched in this order:

  • --dir reworked_verify_dir=$reworked_verify_dir

  • target.$name.reworked_verify_dir

  • engine.$engine.reworked_verify_dir

  • core.reworked_verify_dir

  • $reworked_dir/reworked_verify

extension

my $extension = $target->extension;

The file name extension to append to change names to create script file names. The value comes from one of these options, searched in this order:

  • --extension

  • target.$name.extension

  • engine.$engine.extension

  • core.extension

  • "sql"

engine_key

my $key = $target->engine_key;

The key defining which engine to use. This value defines the class loaded by engine. Convenience method for $target->uri->canonical_engine.

dsn

my $dsn = $target->dsn;

The DSN to use when connecting to the target via the DBI. Convenience method for $target->uri->dbi_dsn.

username

my $username = $target->username;

The username to use when connecting to the target via the DBI. Convenience method for $target->uri->user.

password

my $password = $target->password;

The password to use when connecting to the target via the DBI. Convenience method for $target->uri->password.

See Also

sqitch

The Sqitch command-line client.

Author

David E. Wheeler <david@justatheory.com>

License

Copyright (c) 2012-2018 iovation Inc.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.