NAME

UI::Various - graphical/non-graphical user interface without external programs

SYNOPSIS

use UI::Various;

ABSTRACT

Did you ever need to decide if a graphical or text based user interface is best for your Perl application? A GUI may be easier to use, but will not run on run on a server without a window system (like X11 or Wayland) and makes testing it more difficult. The solution to this dilemma is UI::Various.

UI::Various is a simple variable graphical and non-graphical user interface (UI). Unlike UI::Dialog is uses no external programs. Instead, depending on the Perl UI packages installed on a machine, it used the best one available from a list of different UI systems. If none could be found at all, it falls back to a very simple query/response interface on the terminal / console using only core components. To make an application as accessible as possible (for the visually impaired or any automated script) it also allows selection of a specific (installed) UI by the user via the environment variable UI.

Of course this variability does not come without some simplifications:

At any time there can be only one active window and one (modal) dialogue "in front" of that window. See "LIMITS" for more details. All graphics, pictures or icons (unless the later are part of the character set used) need alternative descriptions for the text based interfaces, which can make a big difference in the usability.

Currently the module is still missing some of its planned frills like alignment, colour, exact positioning, graphics, pictures or icons. At least the first two of this list will be added in later versions. The essential functionality is ready to be used and will be tested / used by another project developed before further enhancements on this one.

DESCRIPTION

UI::Various is a user interface (UI) choosing the best available UI from a list of supported ones to an end-user. Preferably - but depending on installed Perl packages and the environment, especially the environment variables DISPLAY and UI - this would be a graphical user interface (GUI), but it can fallback to a non-graphical alternative (terminal user interface aka TUI) and a very simple command-line based one as last resort.

Currently UI::Various supports the following UIs (the sequence here is also the default selection sequence):

Tk: probably the oldest GUI available for Perl, needs a defined DISPLAY environment variable
Curses: the standard terminal UI using the Curses::UI package
RichTerm: a builtin query/response console interface still using ANSI colours, simple graphics and Term::Readline for the input (only Perl core modules)
(finally) PoorTerm: a very simple builtin query/response console interface where nested container elements must be selected to interact with something inside; they are also simply displayed in sequence without other arrangement

If the environment variable UI is set, contains one of the values above and meets all requirements for the corresponding UI, it's taking precedence over the list in the use statement.

LIMITS

As it is quite difficult to (as a developer) implement and/or (as a user) understand a terminal based UI with multiple parallel windows to interact with, only one window may be active at any time. For simple modal queries this window may open a dialogue window blocking itself until the dialogue returns. However, it is possible to have a list of multiple windows and switch between them: One is active and the others are inactive, waiting to be activated again. See examples/hello-two-windows.pl and examples/hello-variable-content.pl.

Check buttons may not have variable texts.

Radio buttons can only be arranged vertically.

KNOWN BUGS

Setting an attribute of any object to undef will not work with Perl versions prior to 5.20 (see perl5200delta, bugs #7508 and #109726). The only possible (and dirty!) workaround is setting the member of the internal hash directly.

Boxes can not have visible borders in Curses::UI as they are currently "faked" and do not use a proper Curses::UI element. This also sometimes leads to a Curses interface needing slightly more space than the equivalent RichTerm one. In addition Curses::UI has limitations concerning the alignment of the widgets.

Running Main::mainloop more than once causes Tk to abort with sporadic (about 1 in 9) segmentation violations in Tk's internal code. In addition there are sporadic core dumps when running Tk in a virtual X11 framebuffer (Xvfb). Finally the calculation for automatic wrapping in Tk needs improvement.

Methods, member variables, etc. starting with an underscore (_) are considered to be internal only. Their usage and interfaces may change between versions in an incompatible way!

We (try to) use US English for identifiers while using GB English for the documentation. This is intended and not a bug!

Some CPAN smoke testers fail some of the test scripts (notably #11, #14, #20 and #41) when the size of their virtual terminal is too small (height less than 12 lines)

METHODS

import - import and initialisation of UI::Various package

use UI::Various;
    or
use UI::Various({<options>});

example:

use UI::Various({ use => [qw(Tk RichTerm)],
                  log => 'INFO',
                  language => 'de',
                  stderr => 1,
                  include => [qw(Main Window Button)]});

parameters:

use                 prioritised list of UI packages to be checked/used
language            (initial) language used by the package itself
                    (both for debugging and UI elements)
log                 (initial) level of logging
stderr              (initial) handling of STDERR output
include             list of UI element packages to include as well

description:

This method initialised the UI::Various package. It checks for the UI packages available and selects / initialises the best one available. In addition it sets up the handling of error messages and the (initial) language and debug level of the package.

The prioritised list of UI packages (use) is a list of one or usually more than one of the possible interface identifiers listed above. Note that the last resort UI PoorTerm is always added automatically to the end of this list.

`language`

configures the initial language used by the package itself, both for messages and the UI elements. Currently 2 languages are supported:

de
en (default)

`log`

sets the initial level of logging output:

FATAL: Log only fatal errors that cause UI::Various (and thus the application using it) to abort.
ERROR: Also log non-fatal errors like bad parameters replaced by default values. This is the default value.
WARN or WARNING: Also log warnings like features not supported by the currently used UI or messages missing for the currently used (non-English) language.
INFO or INFORMATION: Also log information messages like the UI chosen at startup.
DEBUG_n: Also log debugging messages of various debugging levels, mainly used for development. Note that debugging messages are always English.

`stderr`

configures the handling of output send to STDERR:

3

suppress all output to STDERR (usually not a good idea!)

2

catch all error messages and print them when the program exits (or you switch back to 0) in order to avoid cluttering the terminal output, e.g. when running under Curses

Note that under Curses you probably even then still won't see the output, as the ncurses library apparently clears the terminal after Perl's END handlers. See examples/listbox.pl and examples/select-file.pl for a possible mitigation.

1

identical to 2 when using a TUI (except PoorTerm) and identical to 0 when using a GUI or PoorTerm

0

print error messages etc. immediately to STDERR (default)

Note that configuration 1 suppresses the standard error output of external programs (e.g. using system or back-ticks) instead of capturing it. Also note that some fatal errors during initialisation are not caught.

`include`

defines a list of UI elements to automatically import as well. It defaults to the string all, but may contain a reference to an array containing the name of specific UI elements like Main, L < Window|UI::Various::Window>, L < Text|UI::Various::Text>, L < Button|UI::Various::Button>, etc. instead. If it is set to the string none, no other UI element package is imported automatically.

language - get or set currently used language

$language = language();
$language = language($new_language);

example:

if (language() ne 'en') ...

parameters:

$language           optional new language to be used

description:

This function returns the currently used language. If the optional parameter $new_language is set and a supported language, the language is first changed to that.

logging - get or set currently used logging-level

$log_level = $logging();
logging($new_level);

example:

logging('WARN');

parameters:

$new_level          optional new logging-level to be used

description:

This function returns the currently used logging-level. If the optional parameter $new_level is set and a supported keyword (see possible values for the corresponding parameter log of use above), the logging-level is first changed to that.

stderr - get or set currently used handling of output

$output = $stderr();
stderr($new_value);

example:

stderr(1) if stderr() == 3;

parameters:

$new_value          optional new output-handling

description:

This function returns the currently used variant for the handling of output to STDERR (see possible values for the corresponding parameter of use above). If the optional parameter $new_value is set and a supported log, the handling is first changed to that.

using - get currently used UI

$interface = $using();

description:

This function returns the currently used user interface.

LICENSE

This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See LICENSE file for more details.

AUTHOR

Thomas Dorner <dorner (at) cpan (dot) org>

To install UI::Various, copy and paste the appropriate command in to your terminal.

cpanm

cpanm UI::Various

CPAN shell

perl -MCPAN -e shell
install UI::Various

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

SYNOPSIS

ABSTRACT

DESCRIPTION

LIMITS

KNOWN BUGS

METHODS

import - import and initialisation of UI::Various package

example:

parameters:

description:

language

log

stderr

include

language - get or set currently used language

example:

parameters:

description:

logging - get or set currently used logging-level

example:

parameters:

description:

stderr - get or set currently used handling of output

example:

parameters:

description:

using - get currently used UI

description:

SEE ALSO

LICENSE

AUTHOR

Module Install Instructions

`language`

`log`

`stderr`

`include`