/ 
Config-Model-LcdProc-2.055
River stage zero No dependents
/ Config::Model::models::LCDd::CFontzPacket

NAME

Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket

DESCRIPTION

Configuration classes used by Config::Model

generated from LCDd.conf

Elements

Brightness

Set the initial brightness Optional. Type integer.

upstream_default value :

1000

Contrast

Set the initial contrast Optional. Type integer.

upstream_default value :

560

Device

Select the output device to use Optional. Type uniline.

upstream_default value :

/dev/lcd

Model

Select the LCD model Optional. Type enum. choice: '533', '631', '633', '635'.

upstream_default value :

633

OffBrightness

Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type integer.

upstream_default value :

0

OldFirmware

Very old 633 firmware versions do not support partial screen updates using 'Send Data to LCD' command (31). For those devices it may be necessary to enable this flag. Optional. Type boolean.

upstream_default value :

no

Reboot

Reinitialize the LCD's BIOS on driver start. Optional. Type boolean.

upstream_default value :

no

Size

Override the LCD size known for the selected model. Usually setting this value should not be necessary. Optional. Type uniline.

upstream_default value :

20x4

Speed

Override the default communication speed known for the selected model. Default value depends on model Optional. Type enum. choice: '19200', '115200'.

USB

Enable the USB flag if the device is connected to an USB port. For serial ports leave it disabled. Optional. Type boolean.

upstream_default value :

no

SEE ALSO