NAME

Lexical::Failure - User-selectable lexically-scoped failure signaling

VERSION

This document describes Lexical::Failure version 0.001000

SYNOPSIS

package Your::Module;

# Set up this module for lexical failure handling...
use Lexical::Failure;

# Each time module is imported, set up failure handler...
sub import {
    my ($package, %named_arg) = @_;

    ON_FAILURE( $named_arg{'fail'} );
}

# Then, in the module's subs/methods, call fail() to fail...
sub inverse_square {
    my ($n) = @_;

    if ($n == 0) {
        fail "Can't invert zero";
    }

    return 1/$n**2;
}

sub load_file {
    my ($filename) = @_;

    fail 'No such file: ', $filename
        if ! -r $filename;

    local (@ARGV, $/) = $filename;
    return readline;
}

DESCRIPTION

This module sets up two new keywords: fail and ON_FAILURE, with which you can quickly create modules whose failure signaling is lexicially scoped, under the control of client code.

Normally, modules specify some fixed mechanism for error handling and require client code to adapt to that policy. One module may signal errors by returning undef, or perhaps some special "error object". Another may die or croak on failure. A third may set a flag variable. A fourth may require the client code to set up a callback, which is executed on failure.

If you are using all four modules, your own code now has to check for failure in four different ways, depending on where the failing component originated. If you would rather that all components throw exceptions, or all return undef, you will probably have to write wrappers around 3/4 of them, to convert from their "native" failure mechanism to your preferred one.

Lexical::Failure offers an alternative: a simple mechanism with which module authors can generically specify "fail here with this message" (using the fail keyword), but then allow each block of client code to decide how that failure is reported to it within its own lexical scope (using the ON_FAILURE keyword).

Module authors can still provide a default failure signaling mechanism, for when client code does not specify how errors are to be reported. This is handy for ensuring backwards compatibility in existing modules that are converted to this new failure signaling approach.

INTERFACE

Accessing the API

To install the new fail and ON_FAILURE keywords, simple load the module:

use Lexical::Failure;

Changing the names of the API keywords

To avoid name conflicts, you can change the name of either (or both) of the keywords that the module sets up, by passing a named argument when loading the module. The name of the argument should be the standard name of the keyword you want to rename, and the value of the argument should be a string containing the new name. For example:

use Lexical::Failure (
    fail       => 'return_error',
    ON_FAILURE => 'set_error_handler',
);

sub import {
    my ($package, %named_arg) = @_;

    set_error_handler( $named_arg{'fail'} );
}

sub inverse_square {
    my ($n) = @_;

    return_error "Can't invert zero" if $n == 0;

    return 1/$n**2;
}

Signaling failure with `fail`

Once the module is loaded, you simply use the fail keyword in place of return, return undef, die, croak, confess, or any other mechanism by which you would normally indicate failure.

You can call fail with any number of arguments, including none, and these will be passed to whichever failure handler the client code eventually selects (see below).

Note that fail is a keyword, not a subroutine (that is, it's like return itself, and not something you can call as part of a larger expression).

Note too that, as failure handlers operate at the interface level of a module, calling fail in a nested call within the package signals the failure from the package boundary (i.e. like croak and carp do).

Specifying a lexically scoped failure handler with `ON_FAILURE`

You set up a failure-signaling interface for client code by placing the ON_FAILURE keyword in your module's import() subroutine (or in a subroutine called from your import()).

The keyword expects one argument, which specifies how failures in the module are to be handled in the lexical scope where your module was loaded. The single argument can be:

a string containing the name of a named failure handler
a reference to a variable, into which failure signals will be stored
a reference to a subroutine, which will be used as a callback and invoked whenever a failure is to be signalled
undef (or no argument at all), in which case ON_FAILURE does nothing. This means you don't need to bother checking whether a failure specifier was passed in to your import(). Just pass in the resulting undef value...and it's ignored.

Typically, then, you have your import() subroutine accept an argument through which client code indicates its desired failure mode:

package Your::Module;

sub import {
    my ($package, %named_arg) = @_;

    ON_FAILURE $named_arg{'fail'};
}

Then the client code can specify different reporting strategies in different lexical scopes:

# Hereafter, report failures by returning undef...
use Your::Module  fail => 'undef';

{
    # But in this block, make errors fatal...
    use Your::Module  fail => 'croak';

    {
        # And in here, set a flag...
        my $nested_error_flag;
        use Your::Module  fail => \$nested_error_flag;

        {
            # And in here, any error is quietly loggged...
            use Your::Module  fail => sub { $logger->error(@_) };
        }
    }

    # Back to croaking errors here
}

# Back to returning undef here

Each use Your::Module invokes Your::Module::import(), whereupon the call to ON_FAILURE installs the specified failure handler into the lexical scope in which use Your::Module occurred. The installed handler is specific to Your::Module, so if two or more modules are each using Lexical::Failure, client code can set failure-signaling policies for each module independently in the same scope.

Named failure handlers

If ON_FAILURE is passed a string, that string is treated as the name of a predefined failure handler. Lexical::Failure provides six standard named handlers:

ON_FAILURE 'null'

Specifies that each fail @args should act like:

return;

That is: return undef in scalar context or return an empty list in list context.

Note that, this context-sensitive behaviour can occasionally lead to subtle errors. For example, if these three subroutines are using ON_FAILURE 'null' failure signaling:

my %personal_data = (
    name   => get_name(),
    age    => get_age(),
    status => get_status(),
);

then if any of them fails, it will return an empty list, messing up the initialization of the hash. In such cases, ON_FAILURE 'undef' is a better alternative.

ON_FAILURE 'undef'

Specifies that each fail @args should act like:

return undef;

Note that to get this behaviour, the argument needs to be 'undef' (a five letter string), not undef (the special undefined value).

Note too that, when this handler is selected, fail returns an undef even in list context. This can be problematical, as an undef is (to many people's surprise) true in list context. For example, if get_results() returns undef on failure, the conditional test of this if will still be true:

if (my @results = get_results($data)) {
    ....
}

because @results will then contain one element (the undef), and a non-empty array always evaluates true in boolean context.

For this reason it's usually better to use ON_FAILURE 'null' instead.

ON_FAILURE 'die'

Specifies that each fail @args should act like:

die @args;

ON_FAILURE 'croak'

Specifies that each fail @args should act like:

Carp::croak(@args);

ON_FAILURE 'confess'

Specifies that each fail @args should act like:

Carp::confess(@args);

ON_FAILURE 'failobj'

Specifies that each fail @args should act like:

return Lexical::Failure::Objects->new(
            msg     => ( @args == 1 ? $args[0] : "@args" ),
            context => [caller 1]
       );

In other words, ON_FAILURE 'failobj' causes fail to return a special object encapsulating the arguments passed to fail and the call context in which the fail occurred.

See the documentation of Lexical::Failure::Objects for more details on this alternative.

You can also set up other named failure handlers of your own devising (see "Specifying additional named failure handlers").

Variables as failure handlers

If ON_FAILURE is passed a reference to a scalar, array, or hash, that variable becomes the "receiver" of subsequent failure reports, as follows:

ON_FAILURE \$scalar

Specifies that fail @args should act like:

$scalar = [@args];
return undef;

ON_FAILURE \@array

Specifies that fail @args should act like:

push @array, [@args];
return undef;

ON_FAILURE \%hash

Specifies that fail @args should act like:

$hash{ $CURRENT_SUBNAME } = [@args];
return undef;

Subroutines as failure handlers

ON_FAILURE can also be passed a reference to a subroutine, which then acts like a callback when failures are signalled.

In other words:

ON_FAILURE $subroutine_ref;

causes fail @args to act like:

return $subroutine_ref->(@args);

The availability of this alternative means that client code can create entirely new failure-signaling behaviours whenever needed. For example:

# Signal failure by logging an error and returning negatively...
use Your::Module  fail => sub { $logger->error(@_); return -1; };


# Signal failure by returning undef/empty list,
# except in one critical case...
use Your::Module  fail => sub { 
                              my $msg = "@_";
                              croak $msg if $msg =~ /dangerous/;
                              return;
                          };


# The very first failure is instantly (and unluckily) fatal...
use Your::Module  fail => sub { carp(@_); exit(13) };

Restricting how client code can signal failure

Because the call to ON_FAILURE must occur in your module's import() subroutine, you always have ultimate control over what types of failure signaling the client code may request from your module.

For example, to prevent client code from requesting return undef behaviours:

sub import {
    my ($package, %named_arg) = @_;

    croak "Can't specify 'undef' as a failure handler"
        if $named_arg{'fail'} eq 'undef';

    ON_FAILURE $named_arg{'fail'};
}

or to quietly convert 'die' behaviours into (much more useful) 'croak' behaviours:

sub import {
    my ($package, %named_arg) = @_;

    $named_arg{'fail'} =~ s/^die$/croak/;

    ON_FAILURE $named_arg{'fail'};
}

Specifying a module's default failure handler

In any scope where no explicit failure signaling behaviour has been specified, Lexical::Failure defaults to its standard 'croak' behaviour (see "Named failure handlers").

However, you can also specify a different default for your module, by adding a named argument when you load Lexical::Failure:

# Default to full confession on failure...
use Lexical::Failure  default => 'confess';

# Default to 'return undef or empty list' on failure...
use Lexical::Failure  default => 'null';

# Default to instant fatality on failure...
use Lexical::Failure  default => sub { carp(@_); exit() };

The values allowed for the 'default' option are somewhat more restrictive than those which can be passed directly to ON_FAILURE; you can specify only standard named handlers (see "Named failure handlers") or a subroutine reference.

If you need your default to be a non-standard named handler (see "Specifying additional named failure handlers") or a reference to a variable, you must arrange that in your import() instead. For example:

sub import {
    my ($package, %named_arg) = @_;

    # Install failure signaling, if specified...
    if (defined $named_arg{'fail'}) {
        ON_FAILURE $named_arg{'fail'};
    }

    # Otherwise, default to pushing errors onto a package variable
    # (yeah, this is a HORRIBLE idea, but it's what our boss decided!)
    else {
        ON_FAILURE \@Your::Module::errors;
    }
}

Specifying additional named failure handlers

The six standard named failure handlers provide convenient declarative shortcuts for client code. That is, instead of constantly having to create messy subroutines like:

use Your::Module 
    fail => sub {
        return Lexical::Failure::Objects->new(
                    msg     => (@_ == 1 ? $_[0] : "@_"),
                    context => [caller 1],
               );
    };

client code can just request:

use Your::Module  fail => 'failobj';

However, you may wish to offer a similar declarative interface for other failure-signaling behaviours that your client code is likely to need. For example:

use Your::Module  fail => 'logged';

use Your::Module  fail => 'exit';

use Your::Module  fail => 'loud undef';

Lexical::Failure provides a simple way to set up extra named handlers like these. You just specify the name and associated callback for each when loading the module:

package Your::Module;

use Lexical::Failure  handlers => {
    'logged'     =>  sub { $logger->error(@_);     },
    'exit'       =>  sub { say @_; exit;           },
    'loud undef' =>  sub { carp(@_); return undef; },
};

The 'handlers' option expects a reference to a hash, in which each key is the name of a new named failure handler, and each corresponding value is a reference to a subroutine implementing the behaviour of that named handler.

Once specified, any of the new handler names may be passed to ON_FAILURE to specify that fail should use the corresponding callback to signal failures.

Note that any extra named handlers defined in this way are only available from the module in which they are defined.

DIAGNOSTICS

Unknown failure handler: %s

You called ON_FAILURE with a string as the handler specification. However, that string was not one of the standard named handlers ('confess', 'croak', 'die', 'failobj', 'undef', or 'null'), nor any of the extra handlers you may have specified with a 'handlers' option when loading Lexical::Failure.

Did you perhaps misspell the handler name?

Unknown default failure handler: %s

When loading Lexical::Failure, you specified a default handler for all scopes like so:

use Lexical::Failure  default => 'SOME_STRING';

However, the string you specified did not match the name of any of the standard handlers ('confess', 'croak', 'die', 'failobj', 'undef', or 'null') nor the name of any handler you had specified yourself using the 'handlers' option.

Did you perhaps misspell the handler name?

Can't call ON_FAILURE after compilation

Lexical failure handlers must be specified at compile-time (usually in your module's import() subroutine). However, you called ON_FAILURE at runtime.

Move the call into your module's import(), or into some other subroutine that import() calls.

Can't call ON_FAILURE outside a subroutine

You probably attempted to set up a lexical handler at the top level of your module's source code. For example:

package Your::Module;

use Lexical::Failure;
ON_FAILURE('die');

The lexical hinting mechanism that Lexical::Failure uses only works when ON_FAILURE is called from within your module's import() subroutine (or from a subroutine that import() itself calls).

To achieve the "set a default handler for my module" effect intended in the previous example, rewrite it either as:

package Your::Module;

use Lexical::Failure;
sub import { ON_FAILURE('die'); }

or simply:

package Your::Module;

use Lexical::Failure default => 'die';

Missing rename for %s

You tried to rename either fail or ON_FAILURE as part of your use Lexical::Failure call, but forgot to include the new name for the subroutine (i.e. you left out the argument expected after 'fail' or 'ON_FAILURE').

Missing specification for %s

You tried to specify either the 'default' or 'handlers' option as part of your use Lexical::Failure call, but forgot to include the corresponding default value or handlers hash (i.e. you left out the argument expected after 'default' or 'handlers').

Value for %s option must be a %s

You passed a keyword => value pair to use Lexical::Failure, but the value was of the wrong type for that particular keyword. See "Changing the names of the API keywords" or "Specifying a module's default failure handler" or "Specifying additional named failure handlers" for the correct usage.

Handlers in 'handlers' hash must all be code references

The 'handlers' option to use Lexical::Failure expects a reference to a hash in which each value is a code reference. At least one of the values in the hash you passed was something else.

Unexpected argument (%s)

use Lexical::Failure accepts only four arguments:

use Lexical::Failure (
    fail       => $NEW_NAME,
    ON_FAILURE => $NEW_NAME,
    default    => $HANDLER_NAME,
    handlers   => \%HANDLER_HASH,
);

You attempted to pass it something else. Or perhaps you misspelled one of the above keywords?

Invalid handler type (%s) in call to ON_FAILURE

The argument passed to ON_FAILURE must be either a string (i.e. the name of a named handler) or a reference to a subroutine (i.e. the handler itself) or a reference to a variable (i.e. the lvalue into which error messages are to be assigned).

You passed it something else (probably a regex or a reference to a reference).

CONFIGURATION AND ENVIRONMENT

Lexical::Failure requires no configuration files or environment variables.

DEPENDENCIES

Requires the modules: Scope::Upper, Keyword::Simple, and Test::Effects.

Also requires the Lexical::Failure::Objects helper module included in its distribution.

INCOMPATIBILITIES

None reported.

BUGS AND LIMITATIONS

No bugs have been reported.

Please report any bugs or feature requests to bug-lexical-failure@rt.cpan.org, or through the web interface at http://rt.cpan.org.

AUTHOR

Damian Conway <DCONWAY@CPAN.org>

LICENCE AND COPYRIGHT

This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See perlartistic.

DISCLAIMER OF WARRANTY

BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENCE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

To install Lexical::Failure, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Lexical::Failure

CPAN shell

perl -MCPAN -e shell
install Lexical::Failure

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

VERSION

SYNOPSIS

DESCRIPTION

INTERFACE

Accessing the API

Changing the names of the API keywords

Signaling failure with fail

Specifying a lexically scoped failure handler with ON_FAILURE

Named failure handlers

Variables as failure handlers

Subroutines as failure handlers

Restricting how client code can signal failure

Specifying a module's default failure handler

Specifying additional named failure handlers

DIAGNOSTICS

CONFIGURATION AND ENVIRONMENT

DEPENDENCIES

INCOMPATIBILITIES

BUGS AND LIMITATIONS

AUTHOR

LICENCE AND COPYRIGHT

DISCLAIMER OF WARRANTY

Module Install Instructions

Signaling failure with `fail`

Specifying a lexically scoped failure handler with `ON_FAILURE`