NAME

Net::NSS::SSL - SSL sockets using NSS

SYNOPSIS

INTERFACE

CLASS METHODS

Creating sockets

The prefered way of creating sockets is by using the new constructor. This creates this socket, sets the desired options, imports it into SSL layer and connects to the peer host, or binds and sets up a listening socket, in the correct order. If you need more control it's possible to create a new socket using create_socket which in turn must be SSL enabled by calling import_into_ssl_layer before connecting or listening.

new ( $address : string, %args ) : Net::NSS::SSL

new ( %args ) : Net::NSS::SSL

Creates a new socket, sets it up correctly, imports it into NSS SSL layer and optionally if it's a client-side socket connect to the remote host.

PeerAddr : string

The peer to connect to in form of <host>, <host:<port>> or <host:<service>> where host is either an IP number or a hostname, port a integer in the range 1-65535. If a service is specified such as http or ftp, its port number is looked up using getservbyname with the proto tcp.

PeerPort : string | integer

The numerical port or a service name to connect to. If PeerAddr is specified it may take precedence over this.

PeerHost : string

The host to connect to as either an IP number or a hostname. If PeerAddr is specified is may take precedence over this.

Connect : boolean

If true then create the socket, import it into SSL, set the specfied options but don't connect. Defaults to false if omitted.

KeepAlive : boolean

Periodically test whether connection is still alive. Default to false if omitted.

Blocking : boolean

Blocking or non-blocking I/O. Default to 1 if omitted or what the class method blocking returns if such exists.

SSL_PKCS11_PinArg : scalar

Sets the PKCS11 pin arg that is sent along to various funcions for the socket.

SSL_ClientCertHook : coderef | string

Sets the client certificte hook for the socket. If ommited defaults $DefaultClientCertHook if one is defined.

SSL_ClientCertHookArg : scalar

Sets the client certificate hook argument for the socket. If ommited defaults to $DefaultClientCertHookArg if defined.

SSL_EnableOptions : arrayref

A list of options to enable where the items are either numeric or a constant name from Crypt::NSS::SSL::Constants.

SSL_DisableOptions : arrayref

A list of options to enable where the items are either numeric or a constant name from Crypt::NSS::SSL::Constants.

create_socket ( $type : string ) : Net::NSS::SSL

Creates a new socket of the TYPE tcp or udp. Does not set any socket options nor imports it into the SSL layer. You probablly want to use new instead of this method.

import_into_ssl_layer ( )

Imports the socket into NSS SSL layer if not already done. The constructor new does this automatically for you.

INSTANCE METHODS

Connecting to a host

This is done for you if you use new.

connect ( $host : string, $port : integer )
connect ( $host : string, $port : integer, $timeout : integer): Conencts to the host, $host, on the given $port. The optional argument $timeout sets how many seconds connect has to complete the connection setup. If ommited PR_INTERVAL_NO_TIMEOUT is used.

Listening and accepting incoming connections

You don't need to bind and listen if you use new to create your socket.

bind ( $host : string, $port : integer )

Binds an the socket to a network address, ie host + port.

listen ( ) =item listen ( $queue_length : integer )

Listens for connections on the socket. The optional argument $queue_length is the maximum length of the queue of pending connections. Defaults to 10.

configure_as_server ( $certificate : Crypt::NSS::Certificate, $private_key : Crypt::NSS::PrivateKey )

Configures a listening socket with the information needed to handshake as a SSL server.

accept ( ) : Net::NSS::SSL =item accept ( $timeout : integer ) : Net::NSS::SSL

Accepts a connection on the socket and returns the new socket used to communicate with the connected client. The optional argument $timeout specified determined how long the connection setup might take. If ommited PR_INTERVAL_NO_TIMEOUT is used.

This method blocks the calling thread until either a new connection is successfully accepted or an error occurs.

Handshaking

reset_handshake ( $as_server : boolean ): Tells the the SSL library to start over with the handshake at the next I/O operation. This is not necessary for sockets that are already SSL:ed. The argument $as_server tells whether the socket should handshake as server or client.

Socket settings and security options

set_option ( $option : string | integer, $value : scalar )

get_option ( $option : string | integer ) : scalar

Gets and sets socket options. The following options are valid:

KeepAlive : boolean: Periodically test whether connection is still alive.
NoDelay : boolean: Disable Nagle algorithm. Don't delay send to coalesce packets.
Blocking : boolean: Do blocking or non-blocking (network) I/O.

This method also works with SSL options if passed a numeric argument as exported by Crypt::NSS::Constants qw(:ssl) and passing either SSL_OPTION_ENABLED or SSL_OPTION_DISABLED as the value.

set_pkcs11_pin_arg ( $arg : scalar )

get_pkcs11_pin_arg ( ) : scalar

Sets or gets the argument that is passed along to pkcs11 callbacks for the given socket. $arg can be any Perl scalar but in most cases you'll just want this to be a string.

The default password callback ("set_password_hook" in Crypt::NSS::PKCS11), returns this value.

set_URL ( $host : string )

get_URL ( ) : string

Set or get the domain name of the host we connect to (or actually what the CN in the servers certificate says). This is used in handshaking and if not matching the handshake will fail.

set_verify_certificate_hook ( $hook : coderef | string )

Sets a custom hook to verify an incoming certificate. The hook is passed the Net::NSS::SSL-object that the hook is registered on, a boolean indicating whether signature should be checked and a boolean indicating if the certificate should be verified as a server (if true) or as a client (if false). The hook can obtain the certificate to be verified by calling peer_certificate on the passed Net::NSS::SSL-object.

To indicate that verification was ok the hook must return SEC_SUCCESS, or SEC_FAILURE if not. Both constants are exported by requesting the tag :sec from Crypt::NSS::Constants.

If not set, NSS uses a default hook that does the right thing in most cases. If you've replaced this with your own reverting to the built-in can be done by passing undef to this method.

Example:

sub my_verify_certificate_hook {
    my ($self, $check_signature, $is_server) = @_;
    
    my $cert = $self->peer_certificate():
    
    return SEC_SUCCESS;
}

set_bad_certificate_hook ( $hook : coderef | string )

Sets a custom hook that is called when certficate authentication (the callback specified above) fails.

set_client_certificate_hook ( $hook : coderef | string )

set_client_certificate_hook ( $hook : coderef | string, $arg : scalar )

Sets a custom hook that is called when a server requests a certificate for authentication. The hook is passed the Net::NSS::SSL-object that is the subject of the authentication request and an array reference containing the names of the CAs the server accepts and optionally the nickname (or data) specified. The hook must return a 2-element list containing: 1) A Crypt::NSS::Certificate-object representing the authentication certificate and 2) a Crypt::NSS::PrivateKey-object representing the certificates private key.

By default no hook is set and one must be provided if your client application is to support client authentication.

NSS provides a built-in hook that should be sufficient in most cases - if $arg is set to a string it uses that as a nickname find the right cert and key otherwise it scans the database for a match. To use the built-in hook pass "built-in" as the hook argument.

If you're using new to construct the socket you can declare your callback using the key ClientAuthHook.

Getting security info

peer_certificate ( ) : Crypt::NSS::Certificate
get_peer_certificate ( ) : Crypt::NSS::Certificate;: Returns the certificate recived from the remote end of the connection. If we're a client that means we get the servers certificate and if we're the server we get the clients authentication certificate (if used).
keysize () : integer
get_keysize () : integer: Returns the length (in bits) of the key used in the session.
secret_keysize ( ) : integer
get_secret_keysize ( ) : integer: Returns the length (in bits) of the secret part in the key used in the session. Also known as effective key size.
issuer ( ) : string
get_issuer ( ) : string: Returns the distinguished name of issuer for the certificate on the other side. Returns no certificate if no certificate is used.
cipher ( ) : string
get_cipher ( ) : string: Returns the name of the cipher used in the session.
subject ( ) : string
get_subject ( ) : string: Returns the distinguished name of the certificate on the other side.

Getting socket info

available ( ) : integer: Returns the number of bytes of undecrypted data available for read. This might not be the same amount when read.
peerhost ( ) : string: Returns the host of the remote side.
peerport ( ) : integer: Returns the port on the remote side.
sockhost ( ) : string: Returns the host on the local side.
sockport ( ) : integer: Returns the port on the local side.
is_connected ( ) : boolean: Returns true if the socket is connected to a peer or false if it's not.
does_ssl ( ) : boolean: Returns true if the sockets has been imported into the SSL layer or false if it has not.

Reading and writing

read ( $target : scalar ) : integer

read ( $target : scalar, $length : integer ) : integer

read ( $target : scalar, $length : integer, $offset : integer ) : integer

sysread ( $target : scalar ) : integer

sysread ( $target : scalar, $length : integer ) : integer

sysread ( $target : scalar, $length : integer, $offset : integer ) : integer

Reads data the scalar passed as $target 8192 bytes at the time or $length. Returns the actual number of bytes read or 0 if we've reached EOF.

If $offset is specified the data will not be placed at the beginning of $target but at the specified offset.

This method is blocking.

write ( $data : string ) : integer

write ( $data : string, $length : integer ) : integer

write ( $data : string, $length : integer, $offset : integer ) : integer

syswrite ( $data : string ) : integer

syswrite ( $data : string, $length : integer ) : integer

syswrite ( $data : string, $length : integer, $offset : integer ) : integer

Writes the contents of $data to the socket and returns the number of bytes actually written.

Finishing up

close ( ): Closes the socket.
remove_from_session_cache ( ): Removes the SSL session from the cache. Communication can continue on the current socket but no new connections can resume the SSL session.

To install Crypt::NSS, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Crypt::NSS

CPAN shell

perl -MCPAN -e shell
install Crypt::NSS

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)