NAME

Apache::ASP - Active Server Pages for Apache with mod_perl 

SYNOPSIS

SetHandler perl-script
PerlHandler Apache::ASP
PerlSetVar Global /tmp

DESCRIPTION

This perl module provides an Active Server Pages port to the Apache HTTP Server with perl as the host scripting language. Active Server Pages is a web application platform that originated with the Microsoft IIS server. Under Apache for both Win32 and Unix, it allows a developer to create dynamic web applications with session management and perl code embedded in static html files.

This is a portable solution, similar to ActiveState PerlScript and MKS PScript implementation of perl for IIS ASP. Work has been done and will continue to make ports to and from these other implementations as seemless as possible.

This module works under the Apache HTTP Server with the mod_perl module enabled. See http://www.apache.org and http://perl.apache.org for futher information.

For database access, ActiveX, and scripting language issues, please read the FAQ section.

INSTALL

The latest Apache::ASP can be found at your nearest CPAN, and also:

http://www.perl.com/CPAN-local/modules/by-module/Apache/

As a perl user, you should make yourself familiar with the CPAN.pm module, and how it may be used to install Apache::ASP, and other related modules.

Once you have downloaded it, Apache::ASP installs easily using the make or nmake commands as shown below. Otherwise, just copy ASP.pm to $PERLLIB/site/Apache

> perl Makefile.PL
> make 
> make test
> make install

* use nmake for win32

Please note that you must first have the Apache HTTP Server & mod_perl installed before using this module in a web server environment. The offline mode for building static html may be used with just perl.

CONFIG

Use with Apache. Copy the ./site/eg directory from the ASP installation to your Apache document tree and try it out! You have to put

AllowOverride All

in your <Directory> config section to let the .htaccess file in the ./site/eg installation directory do its work.

If you want a STARTER config file, just look at the .htaccess file in the ./site/eg directory.

Here is a Location directive that you might put in a *.conf Apache configuration file. Set the optional ones if you want, the defaults are fine. The settings are documented below.

# Generic apache directives to make asp start ticking.
<Location /asp/>    
 SetHandler perl-script
 PerlHandler Apache::ASP
 PerlSetVar Global /tmp
</Location>

You can use the same config in .htaccess files without the Location tag. I use the <Files ~ (\.asp)> tag in the .htaccess file of the directory that I want to run my asp application. This allows me to mix other file types in my application, static or otherwise. Again, please see the ./site/eg directory in the installation for some good starter .htaccess configs, and see them in action on the example scripts.

Global

Global is the nerve center of an ASP application, in which the global.asa may reside, which defines the web application's event handlers.

This directory is pushed onto @INC, you will be able to "use" and "require" files in this directory, so perl modules developed for this application may be dropped into this directory, for easy use.

Unless StateDir is configured, this directory must be some writeable directory by the web server. $Session and $Application object state files will be stored in this directory. If StateDir is configured, then ignore this paragraph, as it overrides the Global directory for this purpose.

Includes, specified with <!--#include file=somefile.inc--> or $Response->Include() syntax, may also be in this directory, please see section on includes for more information.

PerlSetVar Global /tmp

CookiePath

URL root that client responds to by sending the session cookie. If your asp application falls under the server url "/asp", then you would set this variable to /asp. This then allows you to run different applications on the same server, with different user sessions for each application.

PerlSetVar CookiePath /   

GlobalPackage

Perl package namespace that all scripts, includes, & global.asa events are compiled into. By default, GlobalPackage is some obsure name that is uniquely generated from the file path of the Global directory, and global.asa file. The use of explicitly naming the GlobalPackage is to allow scripts access to globals and subs defined in a perl module that is included with commands like:

in perl script: use Some::Package;
in apache conf: PerlModule Some::Package

PerlSetVar GlobalPackage Some::Package

UniquePackages

default 0. Set to 1 to emulate pre-v.10 ASP script compilation behavior, which compiles each script into its own perl package.

Before v.10, ASP scripts were compiled into their own perl package namespace. This allowed ASP scripts in the same ASP application to defined subroutines of the same name without a problem.

As of v.10, ASP scripts in a web application are compiled into the *same* perl package by default, so these scripts, their includes, and the global.asa events all share common globals & subroutines defined by each other. The problem for some developers was that they would at times define a subroutine of the same name in 2+ scripts, and one subroutine definition would redefine the other one because of the namespace collision.

PerlSetVar UniquePackages 0

AllowSessionState

Set to 0 for no session tracking, 1 by default If Session tracking is turned off, performance improves, but the $Session object is inaccessible.

PerlSetVar AllowSessionState 1    

SessionTimeout

Default 20 minutes, when a user's session has been inactive for this period of time, the Session_OnEnd event is run, if defined, for that session, and the contents of that session are destroyed.

PerlSetVar SessionTimeout 20 

SecureSession

default 0. Sets the secure tag for the session cookie, so that the cookie will only be transimitted by the browser under https transmissions.

PerlSetVar SecureSession 1

ParanoidSession

default 0. When true, stores the user-agent header of the browser that creates the session and validates this against the session cookie presented. If this check fails, the session is killed, with the rationale that there is a hacking attempt underway.

This config option was implemented to be a smooth upgrade, as you can turn it off and on, without disrupting current sessions. Sessions must be created with this turned on for the security to take effect.

This config option is to help prevent a brute force cookie search from being successful. The number of possible cookies is huge, 2^128, thus making such a hacking attempt VERY unlikely. However, on the off chance that such an attack is successful, the hacker must also present identical browser headers to authenticate the session, or the session will be destroyed. Thus the User-Agent acts as a backup to the real session id. The IP address of the browser cannot be used, since because of proxies, IP addresses may change between requests during a session.

There are a few browsers that will not present a User-Agent header. These browsers are considered to be browsers of type "Unknown", and this method works the same way for them.

Most people agree that this level of security is unnecessary, thus it is titled paranoid :)

PerlSetVar ParanoidSession 0

Debug

1 for server log debugging, 2 for extra client html output Use 1 for production debugging, use 2 for development. Turn off if you are not debugging.

PerlSetVar Debug 2	

BufferingOn

default 1, if true, buffers output through the response object. $Response object will only send results to client browser if a $Response->Flush() is called, or if the asp script ends. Lots of output will need to be flushed incrementally.

If false, 0, the output is immediately written to the client, CGI style. There will be a performance hit server side if output is flushed automatically to the client, but is probably small.

I would leave this on, since error handling is poor, if your asp script errors after sending only some of the output.

PerlSetVar BufferingOn 1

StatINC

default 0, if true, reloads perl libraries that have changed on disk automatically for ASP scripts. If false, the www server must be restarted for library changes to take effect.

A known bug is that any functions that are exported, e.g. confess Carp qw(confess), will not be refreshed by StatINC. To refresh these, you must restart the www server.

This setting should be used in development only because it is so slow. For a production version of StatINC, see StatINCMatch.

PerlSetVar StatINC 1

StatINCMatch

default undef, if defined, it will be used as a regular expression to reload modules that match as in StatINC. This is useful because StatINC has a very high performance penalty in production, so if you can narrow the modules that are checked for reloading each script execution to a handful, you will only suffer a mild performance penalty.

The StatINCMatch setting should be a regular expression like: Struct|LWP which would match on reloading Class/Struct.pm, and all the LWP/.* libraries.

If you define StatINCMatch, you do not need to define StatINC.

PerlSetVar StatINCMatch .*

SessionSerialize

default 0, if true, locks $Session for duration of script, which serializes requests to the $Session object. Only one script at a time may run, per user $Session, with sessions allowed.

Serialized requests to the session object is the Microsoft ASP way, but is dangerous in a production environment, where there is risk of long-running or run-away processes. If these things happen, a session may be locked for an indefinate period of time. A user STOP button should safely quit the session however.

PerlSetVar SessionSerialize 0

SoftRedirect

default 0, if true, a $Response->Redirect() does not end the script. Normally, when a Redirect() is called, the script is ended automatically. SoftRedirect 1, is a standard way of doing redirects, allowing for html output after the redirect is specified.

PerlSetVar SoftRedirect 0

NoState

default 0, if true, neither the $Application nor $Session objects will be created. Use this for a performance increase. Please note that this setting takes precedence over the AllowSessionState setting.

PerlSetVar NoState 0

StateDir

default $Global/.state. State files for ASP application go to this directory. Where the state files go is the most important determinant in what makes a unique ASP application. Different configs pointing to the same StateDir are part of the same ASP application.

The default has not changed since implementing this config directive. The reason for this config option is to allow OS's with caching file systems like Solaris to specify a state directory separatly from the Global directory, which contains more permanent files. This way one may point StateDir to /tmp/myaspapp, and make one's ASP application scream with speed.

PerlSetVar StateDir ./.state

StateManager

default 10, this number specifies the numbers of times per SessionTimeout that timed out sessions are garbage collected. The bigger the number, the slower your system, but the more precise Session_OnEnd's will be run from global.asa, which occur when a timed out session is cleaned up, and the better able to withstand Session guessing hacking attempts. The lower the number, the faster a normal system will run.

The defaults of 20 minutes for SessionTimeout and 10 times for StateManager, has dead Sessions being cleaned up every 2 minutes.

PerlSetVar StateManager 10

StateDB

default SDBM_File, this is the internal database used for state objects like $Application and $Session. Because an %sdbm_file hash has has a limit on the size of a record / key value pair, usually 1024 bytes, you may want to use another tied database like DB_File.

With lightweight $Session and $Application use, you can get away with SDBM_File, but if you load it up with complex data like $Session{key} = { # very large complex object } you might max out the 1024 limit.

Currently StateDB can only be: SDBM_File, DB_File Please let me know if you would like to add any more to this list.

If you switch to a new StateDB, you will want to delete the old StateDir, as there will likely be incompatibilities between the different database formats, including the way garbage collection is handled.

PerlSetVar StateDB SDBM_File

Filter

On/Off,default Off. With filtering enabled, you can take advantage of full server side includes (SSI), implemented through Apache::SSI. SSI is implemented through this mechanism by using Apache::Filter. A sample configuration for full SSI with filtering is in the ./site/eg/.htaccess file, with a relevant example script ./site/eg/ssi_filter.ssi.

You may only use this option with modperl v1.16 or greater installed and PERL_STACKED_HANDLERS enabled. Filtering may be used in conjunction with other handlers that are also "filter aware".

With filtering through Apache::SSI, you should expect at least a 20% performance decrease, increasing as your files get bigger, increasing the work that SSI must do.

PerlSetVar Filter Off

PodComments

default 1. With pod comments turned on, perl pod style comments and documentation are parsed out of scripts at compile time. This make for great documentation and a nice debugging tool, and it lets you comment out perl code and html in blocks. Specifically text like this:

=pod
text or perl code here
=cut 

will get ripped out of the script before compiling. The =pod and

DynamicIncludes

default 0. SSI file includes are normally inlined in the calling script, and the text gets compiled with the script as a whole. With this option set to TRUE, file includes are compiled as a separate subroutine and called when the script is run. The advantage of having this turned on is that the code compiled from the include can be shared between scripts, which keeps the script sizes smaller in memory, and keeps compile times down.

PerlSetVar DynamicIncludes 0

CgiHeaders

default 0. When true, script output that looks like HTTP / CGI headers, will be added to to the HTTP headers of the request. So you could add: Set-Cookie: test=message

<html>...
to the top of your script, and all the headers preceding a newline
will be added as if with a call to $Response->AddHeader().  This
functionality is here for compatibility with raw cgi scripts,
and those used to this kind of coding.

When set to 0, CgiHeaders style headers will not be parsed from the script response.

PerlSetVar CgiHeaders 0

Clean

default 0, may be set between 1 and 9. This setting determine how much text/html output should be compressed. A setting of 1 strips mostly white space saving usually 10% in output size, at a performance cost of less than 5%. A setting of 9 goes much further saving anywhere 25% to 50% typically, but with a performance hit of 50%.

This config option is implemented via HTML::Clean. Per script configuration of this setting is available via the $Response->{Clean} property, which may also be set between 0 and 9.

PerlSetVar Clean 0

MailHost

The mail host is the smtp server that the below Mail* config directives will use when sending their emails. By default Net::SMTP uses smtp mail hosts configured in Net::Config, which is set up at install time, but this setting can be used to override this config.

The mail hosts specified in the Net::Config file will be used as backup smtp servers to the MailHost specified here, should this primary server not be working.

PerlSetVar MailHost smtp.yourdomain.com

MailErrorsTo

No default, if set, ASP server errors, error code 500, that result while compiling or running scripts under Apache::ASP will automatically be emailed to the email address set for this config. This allows an administrator to have a rapid response to user generated server errors resulting from bugs in production ASP scripts. Other errors, such as 404 not found will be handled by Apache directly.

An easy way to see this config in action is to have an ASP script which calls a die(), which generates an internal ASP 500 server error.

The Debug config of value 2 and this setting are mutually exclusive, as Debug 2 is a development setting where errors are displayed in the browser, and MailErrorsTo is a production setting so that errors are silently logged and sent via email to the web admin.

PerlSetVar MailErrorsTo youremail@yourdomain.com

MailAlertTo

The address configured will have an email sent on any ASP server error 500, and the message will be short enough to fit on a text based pager. This config setting would be used to give an administrator a heads up that a www server error occured, as opposed to MailErrorsTo would be used for debugging that server error.

This config does not work when Debug 2 is set, as it is a setting for use in production only, where Debug 2 is for development use.

PerlSetVar MailAlertTo youremail@yourdomain.com

MailAlertPeriod

Default 20 minutes, this config specifies the time in minutes over which there may be only one alert email generated by MailAlertTo. The purpose of MailAlertTo is to give the admin a heads up that there is an error at the www server. MailErrorsTo is for to aid in speedy debugging of the incident.

PerlSetVar MailAlertPeriod 20

SYNTAX

ASP embedding syntax allows one to embed code in html in 2 simple ways. The first is the <% xxx %> tag in which xxx is any valid perl code. The second is <%= xxx %> where xxx is some scalar value that will be inserted into the html directly. An easy print.

  A simple asp page would look like:
  
  <!-- sample here -->
  <html>
  <body>
  For loop incrementing font size: <p>
  <% for(1..5) { %>
		   <!-- iterated html text -->
		   <font size="<%=$_%>" > Size = <%=$_%> </font> <br>
  <% } %>
  </body>
  </html>
  <!-- end sample here -->

Notice that your perl code blocks can span any html. The for loop above iterates over the html without any special syntax.

EVENTS

The ASP platform allows developers to create Web Applications. In fulfillment of real software requirements, ASP allows event-triggered actions to be taken, which are defined in a global.asa file. The global.asa file resides in the Global directory, defined as a config option , and may define the following actions:

	Action			Event
	------			------
        Script_OnStart *	Beginning of Script execution
        Script_OnEnd *		End of Script execution
	Application_OnStart	Beginning of Application
	Application_OnEnd	End of Application
	Session_OnStart		Beginning of user Session.
	Session_OnEnd		End of user Session.

  * These are API extensions that are not portable, but were
    added because they are incredibly useful

These actions must be defined in the $Global/global.asa file as subroutines, for example:

sub Session_OnStart {
    $Application->{$Session->SessionID()} = started;
}

Sessions are easy to understand. When visiting a page in a web application, each user has one unique $Session. This session expires, after which the user will have a new $Session upon revisiting.

A web application starts when the user visits a page in that application, and has a new $Session created. Right before the first $Session is created, the $Application is created. When the last user $Session expires, that $Application expires also.

Script_OnStart & Script_OnEnd

The script events are used to run any code for all scripts in an application defined by a global.asa. Often, you would like to run the same code for every script, which you would otherwise have to add by hand, or add with a file include, but with these events, just add your code to the global.asa, and it will be run.

There is one caveat. Code in Script_OnEnd is not gauranteed to be run when the user hits a STOP button, since the program execution ends immediately at this event. To always run critical code, use the API extension:

$Server->RegisterCleanup()

Application_OnStart

This event marks the beginning of an ASP application, and is run just before the Session_OnStart of the first Session of an application. This event is useful to load up $Application with data that will be used in all user sessions.

Application_OnEnd

The end of the application is marked by this event, which is run after the last user session has timed out for a given ASP application.

Session_OnStart

Triggered by the beginning of a user's session, Session_OnStart get's run before the user's executing script, and if the same session recently timed out, after the session's triggered Session_OnEnd.

The Session_OnStart is particularly useful for caching database data, and avoids having the caching handled by clumsy code inserted into each script being executed.

Session_OnEnd

Triggered by a user session ending, Session_OnEnd can be useful for cleaning up and analyzing user data accumulated during a session.

Sessions end when the session timeout expires, and the StateManager performs session cleanup. The timing of the Session_OnEnd does not occur immediately after the session times out, but when the first script runs after the session expires, and the StateManager allows for that session to be cleaned up.

So on a busy site with default SessionTimeout (20 minutes) and StateManager (10 times) settings, the Session_OnEnd for a particular session should be run near 22 minutes past the last activity that Session saw. A site infrequently visited will only have the Session_OnEnd run when a subsequent visit occurs, and theoretically the last session of an application ever run will never have its Session_OnEnd run.

Thus I would not put anything mission-critical in the Session_OnEnd, just stuff that would be nice to run whenever it gets run.

OBJECTS

The beauty of the ASP Object Model is that it takes the burden of CGI and Session Management off the developer, and puts them in objects accessible from any ASP script & include. For the perl programmer, treat these objects as globals accesible from anywhere in your ASP application.

Currently the Apache::ASP object model supports the following:

  Object	 -	Function
  ------		--------
  $Session	 -	session state
  $Response	 -	output
  $Request	 -	input
  $Application -	application state
  $Server	 -	OLE support + misc

These objects, and their methods are further defined in the following sections.

$Session Object

The $Session object keeps track of user + web client state, in a persistent manner, making it relatively easy to develop web applications. The $Session state is stored accross HTTP connections, in database files in the Global directory, and will persist across server restarts.

The user session is referenced by a 128 bit / 32 byte MD5 hex hashed cookie, and can be considered secure from session_id guessing, or session hijacking. When a hacker fails to guess a session, the system times out for a second, and with 2**128 (3.4e38) keys to guess, a hacker will not be guessing an id any time soon.

If an incoming cookie matches a timed out or non-existent session, a new session is created with the incoming id. If the id matches a currently active session, the session is tied to it and returned. This is also similar to the Microsoft ASP implementation.

The $Session refererence is a hash ref, and can be used as such to store data as in:

$Session->{count}++;	# increment count by one
%{$Session} = ();	# clear $Session data

The $Session object state is implemented through MLDBM, and a user should be aware of the limitations of MLDBM. Basically, you can read complex structures, but not write them, directly:

$data = $Session->{complex}{data};     # Read ok.
$Session->{complex}{data} = $data;     # Write NOT ok.
$Session->{complex} = {data => $data}; # Write ok, all at once.

Please see MLDBM for more information on this topic. $Session can also be used for the following methods and properties:

$Session->{CodePage}

Not implemented. May never be until someone explains what its supposed to do.

$Session->{LCID}

Not implemented. May never be until someone explains what its supposed to do.

$Session->{SessionID}

SessionID property, returns the id for the current session, which is exchanged between the client and the server as a cookie.

$Session->{Timeout} [= $minutes]

Timeout property, if minutes is being assigned, sets this default timeout for the user session, else returns the current session timeout.

If a user session is inactive for the full timeout, the session is destroyed by the system. No one can access the session after it times out, and the system garbage collects it eventually.

$Session->Abandon()

The abandon method times out the session immediately. All Session data is cleared in the process, just as when any session times out.

$Response Object

This object manages the output from the ASP Application and the client web browser. It does not store state information like the $Session object but does have a wide array of methods to call.

$Response->{Buffer}

Default 1, when TRUE sends output from script to client only at the end of processing the script. When 0, response is not buffered, and client is sent output as output is generated by the script.

$Response->{CacheControl}

Default "private", when set to public allows proxy servers to cache the content. This setting controls the value set in the HTTP header Cache-Control

$Response->{Charset}

This member when set appends itself to the value of the Content-Length HTTP header. If $Response->{Charset} = 'ISO-LATIN-1' is set, the corresponding header would look like:

Content-Type:text/html; charset=ISO-LATIN-1

$Response->{Clean} = 0-9;

API extension. Set the Clean level, default 0, on a per script basis. Clean of 1-9 compresses text/html output. Please see the Clean config option for more information.

$Response->{ContentType} = "text/html"

Sets the MIME type for the current response being sent to the client. Sent as an HTTP header.

$Response->{Expires} = $time

Sends a response header to the client indicating the $time in SECONDS in which the document should expire. A time of 0 means immediate expiration. The header generated is a standard HTTP date like: "Wed, 09 Feb 1994 22:23:32 GMT".

$Response->{ExpiresAbsolute} = $date

Sends a response header to the client with $date being an absolute time to expire. Formats accepted are all those accepted by HTTP::Date::str2time(), e.g.

"Wed, 09 Feb 1994 22:23:32 GMT"       -- HTTP format
"Tuesday, 08-Feb-94 14:15:29 GMT"     -- old rfc850 HTTP format

"08-Feb-94"         -- old rfc850 HTTP format    (no weekday, no time)
"09 Feb 1994"       -- proposed new HTTP format  (no weekday, no time)

"Feb  3  1994"      -- Unix 'ls -l' format
"Feb  3 17:03"      -- Unix 'ls -l' format

$Response->{IsClientConnected}

Not implemented, but returns 1 currently for portability. This is value is not yet relevant, and may not be until apache 1.3.6, which will be tested shortly. Apache versions less than 1.3.6 abort the perl code immediately upon the client dropping the connection.

$Response->{PICS}

If this property has been set, a PICS-Label HTTP header will be sent with its value. For those that do not know, PICS is a header that is useful in rating the internet. It stands for Platform for Internet Content Selection, and you can find more info about it at: http://www.w3.org

$Response->{Status} = $status

Sets the status code returned by the server. Can be used to set messages like 500, internal server error

$Response->AddHeader($name, $value)

Adds a custom header to a web page. Headers are sent only before any text from the main page is sent, so if you want to set a header after some text on a page, you must turn BufferingOn.

$Response->AppendToLog($message)

Adds $message to the server log. Useful for debugging.

$Response->BinaryWrite($data)

Writes binary data to the client. The only difference from $Response->Write() is that $Response->Flush() is called internally first, so the data cannot be parsed as an html header. Flushing flushes the header if has not already been written.

If you have set the $Reponse->{ContentType} to something other than text/html, cgi header parsing (see CGI notes), will be automatically be turned off, so you will not necessarily need to use BinaryWrite for writing binary data.

For an example of BinaryWrite, see the gif.htm example in ./site/eg/gif.htm

Please note that if you are on Win32, you will need to call binmode on a file handle before reading, if its data is binary.

$Response->Clear()

Erases buffered ASP output.

$Response->Cookies($name, [$key,] $value)

Sets the key or attribute of cookie with name $name to the value $value. If $key is not defined, the Value of the cookie is set. ASP CookiePath is assumed to be / in these examples.

 $Response->Cookies('name', 'value'); 
  --> Set-Cookie: name=value; path=/

 $Response->Cookies("Test", "data1", "test value");     
 $Response->Cookies("Test", "data2", "more test");      
 $Response->Cookies(
	"Test", "Expires", 
	&HTTP::Date::time2str(time+86400)
	); 
 $Response->Cookies("Test", "Secure", 1);               
 $Response->Cookies("Test", "Path", "/");
 $Response->Cookies("Test", "Domain", "host.com");
  -->	Set-Cookie:Test=data1=test%20value&data2=more%20test;	\
 		expires=Fri, 23 Apr 1999 07:19:52 GMT;		\
 		path=/; domain=host.com; secure

The latter use of $key in the cookies not only sets cookie attributes such as Expires, but also treats the cookie as a hash of key value pairs which can later be accesses by

$Request->Cookies('Test', 'data1');
$Request->Cookies('Test', 'data2');

Because this is perl, you can (NOT PORTABLE) reference the cookies directly through hash notation. The same 5 commands above could be compressed to:

 $Response->{Cookies}{Test} = 
	{ 
		Secure	=> 1, 
		Value	=>	
			{
				data1 => 'test value', 
				data2 => 'more test'
			},
		Expires	=> 86400, # not portable shortcut, see above
		Domain	=> 'host.com',
		Path    => '/'
	};

and the first command would be:

# you don't need to use hash notation when you are only setting 
# a simple value
$Response->{Cookies}{'Test Name'} = 'Test Value'; 

I prefer the hash notation for cookies, as this looks nice, and is quite perlish. It is here to stay. The Cookie() routine is very complex and does its best to allow access to the underlying hash structure of the data. This is the best emulation I could write trying to match the Collections functionality of cookies in IIS ASP.

For more information on Cookies, please go to the source at http://home.netscape.com/newsref/std/cookie_spec.html

$Response->Debug(@args)

API Extension. If the Debug config option is set greater than 0, this routine will write @args out to server error log. refs in @args will be expanded one level deep, so data in simple data structures like one-level hash refs and array refs will be displayed. CODE refs like

$Response->Debug(sub { "some value" });

will be executed and their output added to the debug output. This extension allows the user to tie directly into the debugging capabilities of this module.

While developing an app on a production server, it is often useful to have a separate error log for the application to catch debuging output separately. One way of implementing this is to use the Apache ErrorLog configuration directive to create a separate error log for a virtual host.

If you want further debugging support, like stack traces in your code, consider doing things like:

$Response->Debug( sub { Carp::longmess('debug trace') };
$SIG{__WARN__} = \&Carp::cluck; # then warn() will stack trace

The only way at present to see exactly where in your script an error occured is to set the Debug config directive to 2, and match the error line number to perl script generated from your ASP script.

However, as of version 0.10, the perl script generated from the asp script should match almost exactly line by line, except in cases of inlined includes, which add to the text of the original script, pod comments which are entirely yanked out, and <% # comment %> style comments which have a \n added to them so they still work.

If you would like to see the HTML preceeding an error while developing, consider setting the BufferingOn config directive to 0.

$Response->End()

Sends result to client, and immediately exits script. Automatically called at end of script, if not already called.

$Response->Flush()

Sends buffered output to client and clears buffer.

$Response->Include($filename, @args)

This API extension calls the routine compiled from asp script in $filename with the args @args. This is a direct translation of the SSI tag

<!--#include file=$filename args=@args-->

Please see the SSI section for more on SSI in general.

This API extension was created to allow greater modularization of code by allowing includes to be called with runtime arguments. Files included are compiled once, and the anonymous coderef from that compilation is cached, thus including a file in this manner is just like calling a perl subroutine.

$Response->Redirect($url)

Sends the client a command to go to a different url $url. Script immediately ends.

$Response->Write($data)

Write output to the HTML page. <%=$data%> syntax is shorthand for a $Response->Write($data). All final output to the client must at some point go through this method.

$Request Object

The request object manages the input from the client brower, like posts, query strings, cookies, etc. Normal return results are values if an index is specified, or a collection / perl hash ref if no index is specified. WARNING, the latter property is not supported in Activeware PerlScript, so if you use the hashes returned by such a technique, it will not be portable.

 # A normal use of this feature would be to iterate through the 
 # form variables in the form hash...

 $form = $Request->Form();
 for(keys %{$form}) {
	$Response->Write("$_: $form->{$_}<br>\n");
 }

 # Please see the ./site/eg/server_variables.htm asp file for this 
 # method in action.

$Request->{TotalBytes}

The amount of data sent by the client in the body of the request, usually the length of the form data. This is the same value as $Request->ServerVariables('CONTENT_LENGTH')

$Request->BinaryRead($length)

Returns a scalar whose contents are the first $length bytes of the form data, or body, sent by the client request. This data is the raw data sent by the client, without any parsing done on it by Apache::ASP.

$Request->ClientCertificate()

Not implemented.

$Request->Cookies($name [,$key])

Returns the value of the Cookie with name $name. If a $key is specified, then a lookup will be done on the cookie as if it were a query string. So, a cookie set by:

Set-Cookie: test=data1=1&data2=2

would have a value of 2 returned by $Request->Cookies('test','data2').

If no name is specified, a hash will be returned of cookie names as keys and cookie values as values. If the cookie value is a query string, it will automatically be parsed, and the value will be a hash reference to these values.

When in doubt, try it out. Remember that unless you set the Expires attribute of a cookie with $Response->Cookies('cookie', 'Expires', $xyz), the cookies that you set will only last until you close your browser, so you may find your self opening & closing your browser a lot when debugging cookies.

For more information on cookies in ASP, please read $Response->Cookies()

$Request->Form($name)

Returns the value of the input of name $name used in a form with POST method. If $name is not specified, returns a ref to a hash of all the form data.

File upload data will be loaded into $Request->Form('file_field'), where the value is the actual file name of the file uploaded, and the contents of the file can be found by reading from the file name as a file handle as in:

while(read($Request->Form('file_field_name'), $data, 1024)) {};

For more information, please see the CGI / File Upload section, as file uploads are implemented via the CGI.pm module. An example can be found in the installation samples ./site/eg/file_upload.asp

$Request->QueryString($name)

Returns the value of the input of name $name used in a form with GET method, or passed by appending a query string to the end of a url as in http://localhost/?data=value. If $name is not specified, returns a ref to a hash of all the query string data.

$Request->ServerVariables($name)

Returns the value of the server variable / environment variable with name $name. If $name is not specified, returns a ref to a hash of all the server / environment variables data. The following would be a common use of this method:

$env = $Request->ServerVariables();
# %{$env} here would be equivalent to the cgi %ENV in perl.

$Application Object

Like the $Session object, you may use the $Application object to store data across the entire life of the application. Every page in the ASP application always has access to this object. So if you wanted to keep track of how many visitors there where to the application during its lifetime, you might have a line like this:

$Application->{num_users}++

The Lock and Unlock methods are used to prevent simultaneous access to the $Application object.

$Application->Lock()

Locks the Application object for the life of the script, or until UnLock() unlocks it, whichever comes first. When $Application is locked, this gaurantees that data being read and written to it will not suddenly change on you between the reads and the writes.

This and the $Session object both lock automatically upon every read and every write to ensure data integrity. This lock is useful for concurrent access control purposes.

Be careful to not be too liberal with this, as you can quickly create application bottlenecks with its improper use.

$Application->UnLock()

Unlocks the $Application object. If already unlocked, does nothing.

$Application->SessionCount()

This NON-PORTABLE method returns the current number of active sessions, in the application. This method is not implemented as part of the ASP object model, but is implemented here because it is useful. In particular, when accessing databases with license requirements, one can monitor usage effectively through accessing this value.

This is a new feature as of v.06, and if run on a site with previous versions of Apache::ASP, the count may take a while to synch up. To ensure a correct count, you must delete all the current state files associated with an application, usually in the $Global/.state directory.

$Server Object

The server object is that object that handles everything the other objects do not. The best part of the server object for Win32 users is the CreateObject method which allows developers to create instances of ActiveX components, like the ADO component.

$Server->{ScriptTimeout} = $seconds

Not implemented. May never be. Please see the Apache Timeout configuration option, normally in httpd.conf.

$Server->CreateObject($program_id)

Allows use of ActiveX objects on Win32. This routine returns a reference to an Win32::OLE object upon success, and nothing upon failure. It is through this mechanism that a developer can utilize ADO. The equivalent syntax in VBScript is

Set object = Server.CreateObject(program_id)

For further information, try 'perldoc Win32::OLE' from your favorite command line.

$Server->HTMLEncode($string)

Returns an HTML escapes version of $string. &, ", >, <, are each escapes with their HTML equivalents. Strings encoded in this nature should be raw text displayed to an end user, as HTML tags become escaped with this method. "

$Server->MapPath($url);

Given the url $url, absolute, or relative to the current executing script, this method returns the equivalent filename that the server would translate the request to, regardless or whether the request would be valid.

Only a $url that is relative to the host is valid. Urls like "." and "/" are fine arguments to MapPath, but "http://localhost" would not be.

To see this method call in action, check out the sample ./site/eg/server.htm script.

$Server->URLEncode($string)

Returns the URL-escaped version of the string $string. +'s are substituted in for spaces and special characters are escaped to the ascii equivalents. Strings encoded in this manner are safe to put in url's... they are especially useful for encoding data used in a query string as in:

$data = $Server->URLEncode("test data");
$url = "http://localhost?data=$data";

$url evaluates to http://localhost?data=test+data, and is a 
valid URL for use in anchor <a> tags and redirects, etc.

$Server->RegisterCleanup($sub_reference)

non-portable extension

Sets a subroutine reference to be executed after the script ends, whether normally or abnormally, the latter occuring possibly by the user hitting the STOP button, or the web server being killed. This subroutine must be a code reference created like:

$Server->RegisterCleanup(sub { $main::Session->{served}++; });
  or
sub served { $main::Session->{served}++; }
$Server->RegisterCleanup(\&served);

The reference to the subroutine passed in will be executed. Though the subroutine will be executed in anonymous context, instead of the script, all objects will still be defined in main::*, that you would reference normally in your script. Output written to $main::Response will have no affect at this stage, as the request to the www client has already completed.

Check out the ./site/eg/register_cleanup.asp script for an example of this routine in action.

SSI

SSI is great! One of the main features of SSI is to include other files in the script being requested. In Apache::ASP, this is implemented in a couple ways, the most crucial of which is implemented in the file include. Formatted as

<!--#include file=filename.inc-->

,the .inc being merely a convention, text from the included file will be inserted directly into the script being executed and the script will be compiled as a whole. Whenever the script or any of its includes change, the script will be recompiled.

Includes go a great length to promote good decomposition and code sharing in ASP scripts, but they are still fairly static. As of version .09, includes may have dynamic runtime execution, as subroutines compiled into the global.asa namespace. The first way to invoke includes dynamically is

<!--#include file=filename.inc args=@args-->

If @args is specified, Apache::ASP knows to execute the include at runtime instead of inlining it directly into the compiled code of the script. It does this by compiling the script at runtime as a subroutine, and caching it for future invocations. Then the compiled subroutine is executed and has @args passed into its as arguments.

This is still might be too static for some, as @args is still hardcoded into the ASP script, so finally, one may execute an include at runtime by utilizing this API extension

$Response->Include("filename.inc", @args);

which is a direct transalation of the dynamic include above.

Although inline includes should be a little faster, runtime dynamic includes represent great potential savings in httpd memory, as includes are shared between scripts keeping the size of each script to a minimum. This can often be significant saving if much of the formatting occurs in an included header of a www page.

By default, all includes will be inlined unless called with an args parameter. However, if you want all your includes to be compiled as subs and dynamically executed at runtime, turn the DynamicIncludes config option on as documented above.

That is not all! SSI is full featured. One of the things missing above is the

<!--#include virtual=filename.cgi-->

tag. This and many other SSI code extensions are available by filtering Apache::ASP output through Apache::SSI via the Apache::Filter and the Filter config options. For more information on how to wire Apache::ASP and Apache::SSI together, please see the Filter config option documented above. Also please see Apache::SSI for further information on the capabilities it offers.

EXAMPLES

Use with Apache. Copy the ./site/eg directory from the ASP installation to your Apache document tree and try it out! You have to put

AllowOverride All

in your <Directory> config section to let the .htaccess file in the ./site/eg installation directory do its work.

IMPORTANT (FAQ): Make sure that the web server has write access to that directory. Usually a

chmod -R 0777 eg

will do the trick :)

CGI

CGI has been the standard way of deploying web applications long before ASP came along. CGI.pm is a very useful module that aids developers in the building of these applications, and Apache::ASP has been made to be compatible with function calls in CGI.pm. Please see cgi.htm in the ./site/eg directory for a sample ASP script written almost entirely in CGI.

As of version 0.09, use of CGI.pm for both input and output is seemless when working under Apache::ASP. Thus if you would like to port existing cgi scripts over to Apache::ASP, all you need to do is wrap <% %> around the script to get going. This functionality has been implemented so that developers may have the best of both worlds when building their web applications.

Following are some special notes with respect to compatibility with CGI. Use of CGI.pm in any of these ways was made possible through a great amount of work, and is not gauranteed to be portable with other perl ASP implementations, as other ASP implementations will likely be more limited.

Query Object Initialization

You may create a CGI.pm $query object like so:

use CGI;
my $query = new CGI;

As of Apache::ASP version 0.09, form input may be read in by CGI.pm upon initialization. Before, Apache::ASP would consume the form input when reading into $Request->Form(), but now form input is cached, and may be used by CGI.pm input routines.

CGI headers

Not only can you use the CGI.pm $query->header() method to put out headers, but with the CgiHeaders config option set to true, you can also print "Header: value\n", and add similar lines to the top of your script, like:

Some-Header: Value
Some-Other: OtherValue

<html><body> Script body starts here.

Once there are no longer any cgi sytle headers, or the there is a newline, the body of the script begins. So if you just had an asp script like:

print join(":", %{$Request->QueryString});

You would likely end up with no output, as that line is interpreted as a header because of the semicolon. When doing basic debugging, as long as you start the page with <html> you will avoid this problem.

print()ing CGI

CGI is notorious for its print() statements, and the functions in CGI.pm usually return strings to print(). You can do this under Apache::ASP, since print just aliases to $Response->Write(). Note that $| has no affect.

print $query->header();
print $query->start_form();

File Upload

CGI.pm is used for implementing reading the input from file upload. You may create the file upload form however you wish, and then the data may be recovered from the file upload by using $Request->Form(). Data from a file upload gets written to a filehandle, that may in turn be read from. The original file name that was uploaded is the name of the file handle.

my $filehandle = $Request->Form('file_upload_field_name');
print $filehandle; # will get you the file name
my $data;
while(read($filehandle, $data, 1024)) {
	# data from the uploaded file read into $data
};

Please see the docs on CGI.pm (try perldoc CGI) for more information on this topic, and ./site/eg/file_upload.asp for an example of its use.

PERLSCRIPT

Much work has been done to bring compatibility with ASP applications written in PerlScript under IIS. Most of that work revolved around bringing a Win32::OLE Collection interface to many of the objects in Apache::ASP, which are natively written as perl hashes.

The following objects in Apache::ASP respond as Collections:

        $Application
	$Session
	$Request->Form
	$Request->QueryString
	$Request->Cookies
	$Response->Cookies
	$Response->Cookies('Any Cookie')

And as such may be used with the following syntax, as compared with the Apache::ASP native calls. Please note the native Apache::ASP interface is compatible with the deprecated PerlScript interface.

	C = PerlScript Compatibility	N = Native Apache::ASP 
  
        ## Collection->Contents($name) 
	[C] $Application->Contents('XYZ')		
	[N] $Application->{XYZ}

	## Collection->SetProperty($property, $name, $value)
	[C] $Application->Contents->SetProperty('Item', 'XYZ', "Fred");
	[N] $Application->{XYZ} = "Fred"

	## Collection->GetProperty($property, $name)
	[C] $Application->Contents->GetProperty('Item', 'XYZ')		
	[N] $Application->{XYZ}

	## Collection->Item($name)
        [C] print $Request->QueryString->Item('message'), "<br>\n\n";
	[N] print $Request->{QueryString}{'message'}, "<br>\n\n";		

	## Working with Cookies
	[C] $Response->SetProperty('Cookies', 'Testing', 'Extra');
	[C] $Response->SetProperty('Cookies', 'Testing', {'Path' => '/'});
	[C] print $Request->Cookies(Testing) . "<br>\n";
	[N] $Response->{Cookies}{Testing} = {Value => Extra, Path => '/'};
	[N] print $Request->{Cookies}{Testing} . "<br>\n";

Several incompatibilities exist between PerlScript and Apache::ASP:

> Collection->{Count} property has not been implemented.
> VBScript dates may not be used for Expires property of cookies.
> Win32::OLE::in may not be used.  Use keys() to iterate over Collections.
> The ->{Item} property does not work, use the ->Item() method.

FAQ

The following are some frequently asked questions about Apache::ASP.

What is the best way to debug an ASP application ?

There are lots of perl-ish tricks to make your life developing and debugging an ASP application easier. For starters, you will find some helpful hints by reading the $Response->Debug() API extension, and the Debug configuration directive.

Apache errors on the PerlHandler directive ?

You do not have mod_perl correctly installed for Apache. The PerlHandler directive in Apache *.conf files is an extension enabled by mod_perl and will not work if mod_perl is not correctly installed.

Common user errors are not doing a 'make install' for mod_perl, which installs the perl side of mod_perl, and not starting the right httpd after building it. The latter often occurs when you have an old apache server without mod_perl, and you have built a new one without copying over to its proper location.

To get mod_perl, go to http://perl.apache.org

How are file uploads handled?

Please see the CGI section. File uploads are implemented through CGI.pm which is loaded at runtime only for this purpose. This is the only time that CGI.pm will be loaded by Apache::ASP, which implements all other cgi-ish functionality natively. The rationale for not implementing file uploads natively is that the extra 100K in mem for CGI.pm shouldn't be a big deal if you are working with bulky file uploads.

How is database connectivity handled?

Database connectivity is handled through perl's DBI & DBD interfaces. Please see http://www.symbolstone.org/technology/perl/DBI/ for more information. In the UNIX world, it seems most databases have cross platform support in perl.

DBD::ODBC is often your ticket on Win32. On UNIX, commercial vendors like OpenLink Software (http://www.openlinksw.com/) provide the nuts and bolts for ODBC.

Do I have access to ActiveX objects?

Only under Win32 will developers have access to ActiveX objects through the perl Win32::OLE interface. This will remain true until there are free COM ports to the UNIX world. At this time, there is no ActiveX for the UNIX world.

Can I script in VBScript or JScript ?

Yes, but not with this perl module. For ASP with other scripting languages besides perl, you will need to go with a commercial vendor in the UNIX world. ChiliSoft (http://www.chilisoft.com/) has one such solution. Of course on NT, you get this for free with IIS.

How do I get things I want done?!

If you find a problem with the module, or would like a feature added, please mail support, as listed in the SUPPORT section, and your needs will be promptly and seriously considered, then implemented.

What is the state of Apache::ASP? Can I publish a web site on it?

Apache::ASP has been production ready since v.02. Work being done on the module is on a per-need basis, with the goal being to eventually have the ASP API completed, with full portability to ActiveState PerlScript and MKS PScript. If you can suggest any changes to facilitate these goals, your comments are welcome.

I am getting a tie or MLDBM / state error message, what do I do?

Make sure the web server or you have write access to the eg directory, or to the directory specified as Global in the config you are using. Default for Global is the directory the script is in (e.g. '.'), but should be set to some directory not under the www server document root, for security reasons, on a production site.

Usually a

chmod -R -0777 eg

will take care of the write access issue for initial testing purposes.

Failing write access being the problem, try upgrading your version of Data::Dumper and MLDBM, which are the modules used to write the state files.

How do I access the ASP Objects in general?

All the ASP objects can be referenced through the main package with the following notation:

$main::Response->Write("html output");

This notation can be used from anywhere in perl, including routines registered with $Server->RegisterCleanup().

You use the normal notation in your scripts, includes, and global.asa:

$Response->Write("html output");

Can I print() in ASP?

Yes. You can print() from anywhere in an ASP script as it aliases to the $Response->Write() method. Using print() is portable with PerlScript when using Win32::ASP in that environment.

TUNING

A little tuning can go a long way, and can make the difference between a web site that gets by, and a site that screams with speed. With Apache::ASP, you can easily take a poorly tuned site running at 5 hits/second to 25+ hits/second just with the right configuration.

Documented below are some simple things you can do to make the most of your site.

For more tips & tricks on tuning Apache and mod_perl, please see the tuning documents at:

Vivek Khera's modperl performance tuning
http://perl.apache.org/tuning/ 

Stas Beckman's modperl Guide
http://perl.apache.org/guide/

$Application & $Session State

Use NoState 1 setting if you don't need the $Application or $Session objects. State objects such as these tie to files on disk and will incur a performace penalty.

If you need the state objects $Application and $Session, and if running an OS that caches files in memory, set your "StateDir" directory to a cached file system. On WinNT, all files may be cached, and you have no control of this. On Solaris, /tmp is cached and would be a good place to set the "StateDir" config setting to. When cached file systems are used there is little performance penalty for using state files.

High MaxRequests

Set your max requests per child thread or process (in httpd.conf) high, so that ASP scripts have a better chance being cached, which happens after they are first compiled. You will also avoid the process fork penalty on UNIX systems. Somewhere between 100 - 1000 is probably pretty good.

Precompile Scripts

Precompile your scripts by using the Apache::ASP->Loader() routine documented below. This will at least save the first user hitting a script from suffering compile time lag. On UNIX, precompiling scripts upon server startup allows this code to be shared with forked child www servers, so you reduce overall memory usage, and use less CPU compiling scripts for each separate www server process. These savings could be significant. On my PII300, it takes a couple seconds to compile 28 scripts upon server startup, with an average of 50K RAM per compiled script, and this savings is passed on to the child httpd servers.

Apache::ASP->Loader() can be called to precompile scripts and even entire ASP applications at server startup. Note also that in modperl, you can precompile modules with the PerlModule config directive, which is highly recommended.

Apache::ASP->Loader($path, $pattern, %config)

This routine takes a file or directory as its first arg. If a file, that file will be compiled. If a directory, that directory will be recursed, and all files in it whose file name matches $pattern will be compiled. $pattern defaults to .*, which says that all scripts in a directory will be compiled by default. The %config args, are the config options that you want set that affect compilation. These options include Global & DynamicIncludes. If your scripts are later run with different config options, your scripts may have to be recompiled.

Here is an example of use in a *.conf file:

 <Perl> 
	Apache::ASP->Loader(
		'c:/proj/site', "(asp|htm)\$", 
		Debug => 1,
		Global => '/proj/perllib',
		GlobalPackage => SomePackageName
		); 
 </Perl>

This config section tells the server to compile all scripts in c:/proj/site that end in asp or htm, and print debugging output so you can see it work. It also sets the Global directory to be /proj/perllib, which needs to be the same as your real config since scripts are cached uniquely by their Global directory. You will probably want to use this on a production server, unless you cannot afford the extra startup time.

To see precompiling in action, set Debug to 1 for the Loader() and for your application in general and watch your error_log for messages indicating scripts being cached.

No .htaccess or StatINC

Don't use .htaccess files or the StatINC setting in a production system as there are many more files touched per request using these features. I've seen performance slow down by half because of using these. For eliminating the .htaccess file, move settings into *.conf Apache files.

Instead of StatINC, try using the StatINCMatch config, which will check a small subset of perl libraries for changes. This config is fine for a production environment, and if used well might only incur a 10-20% performance penalty.

Turn off Debugging

Turn debugging off by setting Debug to 0. Having the debug config option on slows things down immensely.

RAM Sparing

If you have a lot of scripts, and limited memory, set NoCache to 1, so that compiled scripts are not cached in memory. You lose about 10-15% in speed for small scripts, but save at least 10K per cached script. These numbers are very rough. If you use includes, you can instead try setting DynamicIncludes to 1, which will share compiled code for includes between scripts.

SEE ALSO

perl(1), mod_perl(3), Apache(3), MLDBM(3), HTTP::Date(3), CGI(3), Win32::OLE(3)

NOTES

Many thanks to those who helped me make this module a reality. ASP + Apache, web development could not be better! Kudos go out to:

:) Doug MacEachern, for moral support and of course mod_perl
:) Ryan Whelan, for boldly testing on Unix in the early infancy of ASP
:) Lupe Christoph, for his immaculate and stubborn testing skills
:) Bryan Murphy, for being a PerlScript wiz
:) Francesco Pasqualini, for bringing ASP to CGI
:) Michael Rothwell, for his love of Session hacking
:) Lincoln Stein, for his blessed CGI.pm module
:) Alan Sparks, for knowing when size is more important than speed
:) Jeff Groves, who put a STOP to user stop button woes
:) Matt Sergeant, for his great tutorial on PerlScript and love of ASP
:) Ken Williams, for great teamwork bringing full SSI to the table
:) Darren Gibbons, the biggest cookie-monster I have ever known.
:) Doug Silver, for finding most of the bugs.
:) Marc Spencer, who brainstormed dynamic includes.
:) Greg Stark, for endless enthusiasm, pushing the module to its limits.
:) Richard Rossi, for his need for speed & boldly testing dynamic includes.
:) Bill McKinnon, who understands the finer points of running a web site.
:) Russell Weiss, for being every so "strict" about his code.
:) Paul Linder, who is Mr. Clean... not just the code, its faster too !
:) Tony Merc Mobily, inspiring tweaks to compile scripts 10 times faster

SUPPORT

Support is available via email and mailing list archive.

MAILING LIST ARCHIVE

The modperl mailing list archive is located at http://forum.swarthmore.edu/epigone/modperl , and allows searching for previously asked Apache::ASP questions.

EMAIL

Please send any questions or comments to the Apache modperl mailing list at modperl@apache.org?subject=Apache::ASP or if you do not feel appropriate for the list, just to me directly at chamas@alumni.stanford.org . Please email the modperl list when possible, as it allows other Apache::ASP users the opportunity to answer your questions, and archives the answer at the above list mailing list archive.

SITES USING

What follows is a list of public sites that are using Apache::ASP. If you use the software for your site, and would like to show your support of the software by being listed, please send your URL to me at joshua@chamas.com and I'll be sure to add it to the list.

Chamas Enterprises Inc.		
http://www.chamas.com

HCST
http://www.hcst.net/

Internetowa Gielda Samochodowa		
http://www.gielda.szczecin.pl

Multiple Listing Service of Greater Cincinnati
http://www.cincymls.com/

NODEWORKS - web site link monitoring				
http://www.nodeworks.com

Polish Ports Handbook			
http://www.link.fnet.pl

Sex Shop Online				
http://www.sex.shop.pl

Spotlight
http://www.spotlight.com.au/

COPYRIGHT

Copyright (c) 1998-1999, Joshua Chamas, Chamas Enterprises Inc.

All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

cpanm Apache::ASP

perl -MCPAN -e shell
install Apache::ASP