NAME

Rcs - Perl Object Class for Revision Control System (RCS).

SYNOPSIS

use Rcs;

# Use tags to control how the rcs programs handle errors
# and the use of the rcs -q (quiet) flag.
use Rcs qw(nonFatal Verbose);

The default behavior is to run rcs programs with the -q (quiet) flag, and to die if any rcs program returns an error.

DESCRIPTION

This Perl module provides an object oriented interface to access Revision Control System (RCS) utilities. RCS must be installed on the system prior to using this module. This module should simplify the creation of an RCS front-end.

OBJECT CONSTRUCTOR

The new method may be used as either a class method or an object method to create a new object.

# called as class method
$obj = Rcs->new;

# called as object method
$newobj = $obj->new;

Note: You may now set the pathname of the working file through the object constructor. This is the same as calling the pathname method after calling the new method.

Thus

$obj = Rcs->new($pathname);

is the same as

$obj = Rcs->new;
$obj->pathname($pathname);

See pathname method for additional details.

CLASS METHODS

Besides the object constructor, there are three class methods provided which effect any newly created objects.

The arcext method sets the RCS archive extension, which is ',v' by default.

# set/unset RCS archive extension
Rcs->arcext('');            # set no archive extension
Rcs->arcext(',v');          # set archive extension to ',v'
$arc_ext = Rcs->arcext();   # get current archive extension

The bindir method sets the directory path where the RCS executables (i.e. rcs, ci, co) are located. The default location is '/usr/local/bin'.

# set RCS bin directory
Rcs->bindir('/usr/bin');

# access RCS bin directory
$bin_dir = Rcs->bindir;

The quiet method sets/unsets the quiet mode for the RCS executables. Quiet mode is set by default.

# set/unset RCS quiet mode
Rcs->quiet(0);      # unset quiet mode
Rcs->quiet(1);      # set quiet mode

# access RCS quiet mode
$quiet_mode = Rcs->quiet;

These methods may also be called as object methods.

$obj->arcext('');
$obj->bindir('/usr/bin');
$obj->quiet(0);

OBJECT ATTRIBUTE METHODS

These methods set the attributes of the RCS object.

The file method is used to set the name of the RCS working file. The filename must be set before invoking any access of modifier methods on the object.

$obj->file('mr_anderson.pl');

The arcfile method is used to set the name of the RCS archive file. Using this method is optional, as the other methods will assume the archive filename is the same as the working file unless specified otherwise. The RCS archive extension (default ',v') is automatically added to the filename.

$obj->arcfile('principle_mcvicker.pl');

The workdir methods set the path of the RCS working directory. If not specified, default path is '.' (current working directory).

$obj->workdir('/usr/local/source');

The rcsdir methods set the path of the RCS archive directory. If not specified, default path is './RCS'.

$obj->rcsdir('/usr/local/archive');

The pathname method will set both the working filename and archive directory.

$obj->pathname($RCS_DIR . '/' . 'butthead.c');
and
$obj->pathname($RCS_DIR . '/' . 'butthead.c,v');

are the same as

$obj->rcsdir($RCS_DIR);
$obj->file('butthead.c');

RCS PARSE METHODS

This class provides methods to directly parse the RCS archive file.

The access method returns a list of all user on the access list.

@access_list = $obj->access;

The author method returns the author of the revision. The head revision is used if no revision argument is passed to method.

# returns the author of revision '1.3'
$author = $obj->author('1.3');

# returns the authos of the head revision
$author = $obj->author;

The head method returns the head revision.

$head = $obj->head;

The lock method returns the locker of the revision. The method returns null if the revision is unlocked. The head revision is used if no revision argument is passed to method. When called in list context the lock method returns a hash of all locks.

# returns locker of revision '1.3'
$locker = $obj->lock('1.3');

# returns locker of head revision
$locker = $obj->lock;

# return hash of all locks
%locks = $obj->lock;    # called in list context
foreach $rev (keys %locks) {
    $locker = $locks{$rev};
    print "User $locker has revision $rev locked\n";
}

The revisions method returns a list of all revisions of archive file.

@revisions = $obj->revisions;

The state method returns the state of the revision. The head revision is used if no revision argument is passed to method.

# returns state of revision '1.3'
$state = $obj->state('1.3');

# returns state of head revision
$state = $obj->state;

The symbol method returns the symbol(s) associated with a revision. If called in list context, method returns all symbols associated with revision. If called in scalar context, method returns last symbol assciated with a revision. The head revision is used if no revision argument is passed to method.

# list context, returns all symbols associated with revision 1.3
@symbols = $obj->symbol('1.3');

# list context, returns all symbols associated with head revision
@symbols = $obj->symbol;

# scalar context, returns last symbol associated with revision 1.3
$symbol = $obj->symbol('1.3');

# scalar context, returns last symbol associated with head revision
$symbol = $obj->symbol;

The symbols method returns a hash, keyed by symbol, of all of the revisions associated with the file.

%symbols = $obj->symbols;
foreach $sym (keys %symbols) {
    $rev = $symbols{$sym};
}

The revdate method returns the date of a revision. The returned date format is the same as the localtime format. When called as a scalar, it returns the system date number. If called is list context, the list ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) is returned.

# scalar mode
$scalar_date = $obj->revdate;
print "Scalar date number = $scalar_date\n";
$date_str = localtime($scalar_date);
print "Scalar date string = $date_str\n";

# list mode
@list_date = $obj->revdate;
print "List date = @list_date\n";

The dates method returns a hash of revision dates, keyed on revision. The hash values are system date numbers. When called in scalar mode, the method returns the most recent revision date.

# list mode
%DatesHash = obj->dates;
@dates_list = sort {$b<=>$a} values %DatesHash;
$MostRecent = $dates_list[0];

# scalar mode
$most_recent = $obj->dates;
print "Most recent date = $most_recent\n";
$most_recent_str = localtime($most_recent);
print "Most recent date string = $most_recent_str\n";

The symrev method returns the revision against which a specified symbol was defined. If the symbol was not defined against any version of this file, 0 is returned.

# gets revision that has 'MY_SYMBOL' defined against it
$rev = $obj->symrev('MY_SYMBOL');

The daterev method returns revisions which were created before a specified date. Method may take one or six arguments. If one arguments is passed, then the argument is a date number. If six arguments are passed, then they represent a date string.

# one argument, date number
# gets revisions created before Sun Sep  6 22:23:47 1998
@revs = $obj->daterev(841436420);

# six argument
# gets revisions created before 25th June 1998 16:45:30
@revs = $obj->daterev(1998, 6, 25, 16, 45, 30);

The comments method returns a hash of revision comments, keyed on revision. A key value of 0 returns the description.

%comments = $obj->comments;
$description = $comments{0};
$comment_1_3 = $comments{'1.3'};

RCS SYSTEM METHODS

These methods invoke the RCS system utilities.

The ci method calls the RCS ci program.

# check in, and then check out in unlocked state
$obj->ci('-u');

The co method calls the RCS co program.

# check out in locked state
$obj->co('-l');

The rcs method calls the RCS rcs program.

# lock file
$obj->rcs('-l');

The rcsdiff method calls the RCS rcsdiff program. When called in list context, this method returns the outpout of the rcsdiff program. When called in scalar context, this method returns the return status of the rcsdiff program. The return status is 0 for the same, 1 for some differences, and 2 for error condition.

When called without parameters, rcsdiff does a diff between the current working file, and the last revision checked in.

# call in list context
@diff_output = $obj->rcsdiff;

# call in scalar context
$changed = $obj->rcsdiff;
if ($changed) {
    print "Working file has changed\n";
}

Call rcsdiff with parameters to do a diff between any two revisions.

@diff_output = $obj->rcsdiff('-r1.2', '-r1.1');

The rlog method calls the RCS rlog program. This method returns the output of the rlog program.

# get complete log output
@rlog_complete = $obj->rlog;

# called with '-h' switch outputs only header information
@rlog_header = $obj->rlog('-h');
print @rlog_header;

The rcsclean method calls the RCS rcsclean program.

# remove working file
$obj->rcsclean;

EXAMPLES

CREATE ACCESS LIST

Using method rcs with the -a switch allows you to add users to the access list of an RCS archive file.

use Rcs;
$obj = Rcs->new;

$obj->rcsdir("./project_tree/archive");
$obj->workdir("./project_tree/src");
$obj->file("cornholio.pl");

Methos rcs invokes the RCS utility rcs with the same parameters.

@users = qw(beavis butthead);
$obj->rcs("-a@users");

Calling method access returns list of users on access list.

$filename = $obj->file;
@access_list = $obj->access;
print "Users @access_list are on the access list of $filename\n";

PARSE RCS ARCHIVE FILE

Set class variables and create 'RCS' object. Set bin directory where RCS programs (e.g. rcs, ci, co) reside. The default is '/usr/local/bin'. This sets the bin directory for all objects.

use Rcs;
Rcs->bindir('/usr/bin');
$obj = Rcs->new;

Set information regarding RCS object. This information includes name of the working file, directory of working file ('.' by default), and RCS archive directory ('./RCS' by default).

$obj->rcsdir("./project_tree/archive");
$obj->workdir("./project_tree/src");
$obj->file("cornholio.pl");

$head_rev = $obj->head;
$locker = $obj->lock;
$author = $obj->author;
@access = $obj->access;
@revisions = $obj->revisions;

$filename = $obj->file;

if ($locker) {
    print "Head revision $head_rev is locked by $locker\n";
}
else {
    print "Head revision $head_rev is unlocked\n";
}

if (@access) {
    print "\nThe following users are on the access list of file $filename\n";
    map { print "User: $_\n"} @access;
}

print "\nList of all revisions of $filename\n";
foreach $rev (@revisions) {
    print "Revision: $rev\n";
}

CHECK-IN FILE

Set class variables and create 'RCS' object. Set bin directory where RCS programs (e.g. rcs, ci, co) reside. The default is '/usr/local/bin'. This sets the bin directory for all objects.

use Rcs;
Rcs->bindir('/usr/bin');
Rcs->quiet(0);      # turn off quiet mode
$obj = Rcs->new;

Set information regarding RCS object. This information includes name of working file, directory of working file ('.' by default), and RCS archive directory ('./RCS' by default).

$obj->file('cornholio.pl');

# Set RCS archive directory, is './RCS' by default
$obj->rcsdir("./project_tree/archive");

# Set working directory, is '.' by default
$obj->workdir("./project_tree/src");

Check in file using -u switch. This will check in the file, and will then check out the file in an unlocked state. The -m switch is used to set the revision comment.

Command:

$obj->ci('-u', '-mRevision Comment');

is equivalent to commands:

$obj->ci('-mRevision Comment');
$obj->co;

CHECK-OUT FILE

Set class variables and create 'RCS' object. Set bin directory where RCS programs (e.g. rcs, ci, co) reside. The default is '/usr/local/bin'. This sets the bin directory for all objects.

use Rcs;
Rcs->bindir('/usr/bin');
Rcs->quiet(0);      # turn off quiet mode
$obj = Rcs->new;

Set information regarding RCS object. This information includes name of working file, directory of working file ('.' by default), and RCS archive directory ('./RCS' by default).

$obj->file('cornholio.pl');

# Set RCS archive directory, is './RCS' by default
$obj->rcsdir("./project_tree/archive");

# Set working directory, is '.' by default
$obj->workdir("./project_tree/src");

Check out file read-only:

$obj->co;

or check out and lock file:

$obj->co('-l');

RCSDIFF

Method rcsdiff does an diff between revisions.

$obj = Rcs->new;
$obj->bindir('/usr/bin');

$obj->rcsdir("./project_tree/archive");
$obj->workdir("./project_tree/src");
$obj->file("cornholio.pl");

print "Diff of current working file\n";
if ($obj->rcsdiff) {       # scalar context
    print $obj->rcsdiff;   # list context
}
else {
   print "Versions are Equal\n";
}

print "\n\nDiff of revisions 1.2 and 1.1\n";
print $obj->rcsdiff('-r1.2', '-r1.1');

RCSCLEAN

Method rcsclean will remove an unlocked working file.

use Rcs;
Rcs->bindir('/usr/bin');
Rcs->quiet(0);      # turn off quiet mode
$obj = Rcs->new;

$obj->rcsdir("./project_tree/archive");
$obj->workdir("./project_tree/src");
$obj->file("cornholio.pl");

print "Quiet mode NOT set\n" unless Rcs->quiet;

$obj->rcsclean;

AUTHOR

Craig Freter, <craig@freter.com>

CONTRIBUTORS

David Green, <greendjf@cvhp152.gpt.marconicomms.com>

Jamie O'Shaughnessy, <jamie@thanatar.demon.co.uk>

Raju Krishnamurthy, <raju_k@iname.com>

COPYRIGHT

To install Rcs, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Rcs

CPAN shell

perl -MCPAN -e shell
install Rcs

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

SYNOPSIS

DESCRIPTION

OBJECT CONSTRUCTOR

CLASS METHODS

OBJECT ATTRIBUTE METHODS

RCS PARSE METHODS

RCS SYSTEM METHODS

EXAMPLES

CREATE ACCESS LIST

PARSE RCS ARCHIVE FILE

CHECK-IN FILE

CHECK-OUT FILE

RCSDIFF

RCSCLEAN

AUTHOR

CONTRIBUTORS

COPYRIGHT

Module Install Instructions