/ 
IPC-ShareLite-0.17
River stage three • 4 direct dependents • 433 total dependents
/ IPC::ShareLite

NAME

IPC::ShareLite - Lightweight interface to shared memory

VERSION

This document describes IPC::ShareLite version 0.17

SYNOPSIS

use IPC::ShareLite;

my $share = IPC::ShareLite->new(
    -key     => 1971,
    -create  => 'yes',
    -destroy => 'no'
) or die $!;

$share->store( "This is stored in shared memory" );
my $str = $share->fetch;

DESCRIPTION

IPC::ShareLite provides a simple interface to shared memory, allowing data to be efficiently communicated between processes. Your operating system must support SysV IPC (shared memory and semaphores) in order to use this module.

IPC::ShareLite provides an abstraction of the shared memory and semaphore facilities of SysV IPC, allowing the storage of arbitrarily large data; the module automatically acquires and removes shared memory segments as needed. Storage and retrieval of data is atomic, and locking functions are provided for higher-level synchronization.

In many respects, this module is similar to IPC::Shareable. However, IPC::ShareLite does not provide a tied interface, does not (automatically) allow the storage of variables, and is written in C for additional speed.

Construct an IPC::ShareLite object by calling its constructor:

my $share = IPC::ShareLite->new(
    -key     => 1971,
    -create  => 'yes',
    -destroy => 'no'
) or die $!;

Once an instance has been created, data can be written to shared memory by calling the store() method:

$share->store("This is going in shared memory");

Retrieve the data by calling the fetch() method:

my $str = $share->fetch();

The store() and fetch() methods are atomic; any processes attempting to read or write to the memory are blocked until these calls finish. However, in certain situations, you'll want to perform multiple operations atomically. Advisory locking methods are available for this purpose.

An exclusive lock is obtained by calling the lock() method:

$share->lock();

Happily, the lock() method also accepts all of the flags recognized by the flock() system call. So, for example, you can obtain a shared lock like this:

$share->lock( LOCK_SH );

Or, you can make either type of lock non-blocking:

$share->lock( LOCK_EX|LOCK_NB );

Release the lock by calling the unlock() method:

$share->unlock;

METHODS

new($key, $create, $destroy, $exclusive, $mode, $flags, $size)

This is the constructor for IPC::ShareLite. It accepts both the positional and named parameter calling styles.

$key is an integer value used to associate data between processes. All processes wishing to communicate should use the same $key value. $key may also be specified as a four character string, in which case it will be converted to an integer value automatically. If $key is undefined, the shared memory will not be accessible from other processes.

$create specifies whether the shared memory segment should be created if it does not already exist. Acceptable values are 1, 'yes', 0, or 'no'.

$destroy indicates whether the shared memory segments and semaphores should be removed from the system once the object is destroyed. Acceptable values are 1, 'yes', 0, or 'no'.

If $exclusive is true, instantiation will fail if the shared memory segment already exists. Acceptable values are 1, 'yes', 0, or 'no'.

$mode specifies the permissions for the shared memory and semaphores. The default value is 0666.

$flags specifies the exact shared memory and semaphore flags to use. The constants IPC_CREAT, IPC_EXCL, and IPC_PRIVATE are available for import.

$size specifies the shared memory segment size, in bytes. The default size is 65,536 bytes, which is fairly portable. Linux, as an example, supports segment sizes of 4 megabytes.

The constructor croaks on error.

store( $scalar )

This method stores $scalar into shared memory. $scalar may be arbitrarily long. Shared memory segments are acquired and released automatically as the data length changes. The only limits on the amount of data are the system-wide limits on shared memory pages (SHMALL) and segments (SHMMNI) as compiled into the kernel.

The method raises an exception on error.

Note that unlike IPC::Shareable, this module does not automatically allow references to be stored. Serializing all data is expensive, and is not always necessary. If you need to store a reference, you should employ the Storable module yourself. For example:

    use Storable qw( freeze thaw );
    ...
	$hash = { red => 1, white => 1, blue => 1 };
    $share->store( freeze( $hash ) );
    ...
    $hash = thaw( $share->fetch );

fetch

This method returns the data that was previously stored in shared memory. The empty string is returned if no data was previously stored.

The method raises an exception on error.

lock( $type )

Obtains a lock on the shared memory. $type specifies the type of lock to acquire. If $type is not specified, an exclusive read/write lock is obtained. Acceptable values for $type are the same as for the flock() system call. The method returns true on success, and undef on error. For non-blocking calls (see below), the method returns 0 if it would have blocked.

Obtain an exclusive lock like this:

$share->lock( LOCK_EX ); # same as default

Only one process can hold an exclusive lock on the shared memory at a given time.

Obtain a shared lock this this:

$share->lock( LOCK_SH );

Multiple processes can hold a shared lock at a given time. If a process attempts to obtain an exclusive lock while one or more processes hold shared locks, it will be blocked until they have all finished.

Either of the locks may be specified as non-blocking:

	$share->lock( LOCK_EX|LOCK_NB );
        $share->lock( LOCK_SH|LOCK_NB );

A non-blocking lock request will return 0 if it would have had to wait to obtain the lock.

Note that these locks are advisory (just like flock), meaning that all cooperating processes must coordinate their accesses to shared memory using these calls in order for locking to work. See the flock() call for details.

Locks are inherited through forks, which means that two processes actually can possess an exclusive lock at the same time. Don't do that.

The constants LOCK_EX, LOCK_SH, LOCK_NB, and LOCK_UN are available for import:

use IPC::ShareLite qw( :lock );

Or, just use the flock constants available in the Fcntl module.

unlock

Releases any locks. This is actually equivalent to:

$share->lock( LOCK_UN );

The method returns true on success and undef on error.

version

Each share has a version number that incrementents monotonically for each write to the share. When the share is initally created its version number will be 1.

my $num_writes = $share->version;

key

Get a share's key.

my $key = $share->key;

create

Get a share's create flag.

exclusive

Get a share's exclusive flag.

flags

Get a share's flag.

mode

Get a share's mode.

size

Get a share's segment size.

num_segments

Get the number of segments in a share. The memory usage of a share can be approximated like this:

my $usage = $share->size * $share->num_segments;

$usage will be the memory usage rounded up to the next segment boundary.

destroy

Get or set the share's destroy flag.

PERFORMANCE

For a rough idea of the performance you can expect, here are some benchmarks. The tests were performed using the Benchmark module on a Cyrix PR166+ running RedHat Linux 5.2 with the 2.0.36 kernel, perl 5.005_02 using perl's malloc, and the default shared memory segment size. Each test was run 5000 times.

	DATA SIZE (bytes)	TIME (seconds)	Op/Sec

store	16384			2		2500
fetch	16384			2		2500

store	32768			3		1666	
fetch	32768			3		1666	

store	65536			6		833
fetch	65536			5		1000	

store	131072			12		416	
fetch	131072			12		416	

store	262144			28		178	
fetch  262144			27		185	

store	524288			63		79	
fetch  524288			61		81

Most of the time appears to be due to memory copying. Suggestions for speed improvements are welcome.

PORTABILITY

The module should compile on any system with SysV IPC and an ANSI C compiler, and should compile cleanly with the -pedantic and -Wall flags.

The module has been tested under Solaris, FreeBSD, and Linux. Testing on other platforms is needed.

If you encounter a compilation error due to the definition of the semun union, edit the top of sharestuff.c and undefine the semun definition. And then please tell me about it.

I've heard rumors that a SysV IPC interface has been constructed for Win32 systems. Support for it may be added to this module.

IPC::ShareLite does not understand the shared memory data format used by IPC::Shareable.

AUTHOR

Copyright 1998-2002, Maurice Aubrey <maurice@hevanet.com>. All rights reserved.

This release by Andy Armstrong <andy@hexten.net>.

This module is free software; you may redistribute it and/or modify it under the same terms as Perl itself.

CREDITS

Special thanks to Benjamin Sugars for developing the IPC::Shareable module.

See the Changes file for other contributors.

SEE ALSO

IPC::Shareable, ipc(2), shmget(2), semget(2), perl.