NAME
Lab::Moose::Instrument::Keysight33600 - Keysight 33500/33600 series Function/Arbitrary Waveform Generator (work in progress)
VERSION
version 3.920
SYNOPSIS
use Lab::Moose;
my $trueform = instrument(
type => 'Keysight33600',
connection_type => '...',
connection_options => {...}
);
### Setup waveform ###
# Clear volatile memory
$trueform->write(command => 'DATA:VOL:CLE');
# write new waveform into volatile memory
$trueform->write(command => 'DATA:ARB myarb, 0, 0, 0.1, ...,1, ...');
# load the new waveform
$trueform->write(command => 'SOUR:FUNC:ARB myarb');
# set parameters
$trueform->write(command => 'SOUR:VOLT 1'); # amplitude
$trueform->write(command => 'FUNC:ARB:SRAT 100000'); # samples/points per second
$trueform->write(command => 'FUNC:ARB:FILT STEP'); # interpolation type
$trueform->write(command => 'OUTP:POL INV'); # invert output polarity
# Setup trigger input
$trueform->write(command => 'BURS:MODE TRIG');
$trueform->write(command => 'BURS:NCYC 1'); # one ramp per trigger
$trueform->write(command => 'TRIG:SOUR BUS'}; # use *TRG command as trigger
# Setup trigger output
$trueform->write(command => 'OUTP:TRIG 1');
$trueform->write(command => 'OUTP:TRIG:SLOP NEG');
# Turn output on
$trueform->write(command => 'OUTP ON');
METHODS
Used roles:
COPYRIGHT AND LICENSE
This software is copyright (c) 2024 by the Lab::Measurement team; in detail:
Copyright 2022 Simon Reinhardt
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.