NAME
Lab::Measurement::Examples::Example1_Simple_IV - Lab::Measurement for DUMMIES - Example 1
VERSION
version 3.701
Abstract
This is a simple, but fully functional Lab::Measurement script, which makes use of the Moose high-level interface. Its purpose as a measurement script is to record a single IV-curve. However it is also a step-by-step tutorial (for beginners) in writing a Lab::Measurement script.
Introduction
The high-level, Moose-based sweeps interface of Lab::Measurement serves several purposes: make writing scripts easy and structured, improve the script readability, save keystrokes and implement a whole bunch of features, that probably would make your scripts really messy if you would have to do it by your own. In order to fulfill those goals, we chose a very modular approach, that enables you to interchange elements within a script, and by that creating a whole new measurement without writing everything from scratch.
There is a simple recipe for a measurement script:
Ingredients:
- Measurement instruments
- Sweep Objects
- A Datafile
- Measurement instructions
Throw everything together and start the script.It's really that easy! In the following we would like to show you how to obtain the ingredients and how to put everything in place, using the example of a simple IV-curve measurement:
#-------- 0. Import Lab::Moose -------------
use Lab::Moose;
#-------- 1. Initialize Instruments --------
my $voltage_source = instrument(
type => 'YokogawaGS200',
connection_type => 'LinuxGPIB',
connection_options => {pad => 1},
max_units_per_step => 0.002,
max_units_per_second => 0.1,
min_units => -10,
max_units => 10,
);
my $multimeter = instrument(
type => 'Keysight34470A',
connection_type => 'VXI11',
connection_options => {host => '192.168.3.28'},
);
#-------- 2. Define the Sweeps -------------
my $voltage_sweep = sweep(
type => 'Step::Voltage',
instrument => $gateyoko,
delay_in_loop => 0.05, # wait 50ms after setting voltage
from => 0,
to => 3,
step => 0.002
);
#-------- 3. Create a datafile and plot ----
my $datafile = sweep_datafile(
columns => [qw/voltage current/]
);
$datafile->add_plot(
x => 'voltage',
y => 'current',
);
#-------- 4. Measurement Instructions -------
my $meas = sub {
my $sweep = shift;
my $i_dc = $multimeter->get_value();
$sweep->log(
voltage => $voltage_source->cached_level(),
current => $i_dc,
);
};
#-------- 5. And run it ---------------------
$sweep->start(
measurement => $meas,
datafile => $datafile,
folder => 'ivtrace',
date_prefix => 1,
);
1;Step by step tutorial - How to write an IV-curve measurement
0. Import Lab::Moose
First thing to do in a script: write the following line
use Lab::Moose;This is how you import the new, Moose-based part of the Lab::Measurement library. For basic usage, that's typically everything you need. So you're now ready to start...
1. Measurement instruments
For the measurment we need a voltage source and a multimeter to measure the current through our device. Physically the equipment is already next to the computer and connected. But how do we get it into the script? Here is, how it's done for the voltage source (We chose a Yokogawa GS200 connected via GPIB, address 1 on the bus):
my $voltage_source = instrument(
type => 'YokogawaGS200',
connection_type => 'LinuxGPIB',
connection_options => {pad => 1},
max_units_per_step => 0.01,
max_units_per_second => 0.1,
min_units => -10,
max_units => 10,
);The function instrument() returns the instrument as a Lab::Moose object, which we assign to the variable $voltage_source. As parameters, we pass configuration options in the format of a hash. The first option given above, type, specifies the driver to use. connection_type (here LinuxGPIB) specifies the connection to use for the instrument; a corresponding connection is automatically created with the options given in connection_options.
Here we use, furthermore, the so-called gate protection. Gate protection is a really great feature, which comes with Lab::Measurement, that can help you protecting your samples. We specify that the voltage source should make at most steps of 10mV, sweep at most with a speed of 100mV/s, and reach at most values of +- 10V output voltage.
The available options and parameters can be found in the particular instrument driver documentations. Next, we define our multimeter:
my $multimeter = instrument(
type => 'Keysight34470A',
connection_type => 'VXI11',
connection_options => {host => '192.168.3.28'},
);This is connected via ethernet and speaks the VXI11 protocol. Now we have enough instruments for a simple experiment. Let's get the next ingrediant.
2. Sweep objects
Sweeps are objects which define the basic character of the experiment. Which variable is beeing changed during the experiment, and at which range? How fast is it changed? How often will the experiment be repeated? Creating a sweep works very similar to initializing an instrument, but this time using the function sweep():
my $voltage_sweep = sweep(
type => 'Step::Voltage',
instrument => $voltage_source,
delay_in_loop => 0.05, # wait 50ms after setting voltage
from => 0,
to => 3,
step => 0.002
);Again we have to specify the type of sweep ('Step::Voltage' here for a stepwise voltage sweep) and further configuration. We have to pass the Yokogawa as the conducting instrument of the sweep to the parameter instrument. The from parameter defines the starting point and the to parameter the target of the sweep. step specifies the step size.
How fast the starting point is approached before the sweep starts is decided by the instrument settings.
3. The datafile and the plot
In order to log our measurements, we need a datafile object. It can be obtained using the function sweep_datafile(),
my $datafile = sweep_datafile(
columns => [qw/voltage current/]
);where we have to define the data columns. For the purpose of the IV-curve, voltage and current are enough.
The data will later be logged in the datafile, corresponding to the order you added the columns. If you wish you can also add a plot to the datafile, which will refresh live, each time a new data point is logged. In it's simplest form this can look like this:
$datafile->add_plot(
x => 'voltage',
y => 'current',
);There are more parameters, that modify the look and type of the plot. Details can be found in the documentation of Lab::Moose::Plot.
4. The measurement instructions
As the last ingredient, we have to define how the data values per single measurement are generated. This set of instruction has to be wrapped into subroutine, which will be executed repeatedly while the sweep is sctive. First, let's have a look on the entire block, before discussing it in detail.
my $meas = sub {
my $sweep = shift;
my $i_dc = $multimeter->get_value();
$sweep->log(
voltage => $voltage_source->cached_level(),
current => $i_dc,
);
};Now let's have a closer look:
my $meas = sub { ...-- Here we indicate by the word 'sub', that a new subroutine is created, enclosed by {}. At the same time, the subroutine is assigned to the variable $meas. This allows us to work with it later on.my $sweep = shift;-- This line delivers us the current sweep object, which is important for propper logging of the data.my $i_dc = $multimeter->get_value();-- By using the function get_value() of the multimeter, we retrieve the current measured value. Note that we haven't done any configuration of the multimeter; while this is certainly possible in software, here we assume it has been done manually on the front panel first.$voltage_source->cached_level()-- This reads out the last voltage value that was set on the Yokogawa. That's much faster than actually asking the Yokogawa for the current value.$sweep->log( voltage => $voltage_source->cached_level(), current => $i_dc, );-- To store the generated values we use $sweep->log(). With the hash you put into the function, you connect the freshly measured values with the columns you defined before in your datafile.};-- closes the block and terminates it with a semicolon
5. Putting everything in place
Now we have all ingredients together. But an onion and a potatoe lying side-by-side still make no dish. So, now we have to run the sweep:.
$sweep->start(
measurement => $meas,
datafile => $datafile,
folder => 'ivtrace',
date_prefix => 1,
);As parameters, we pass the measurement subroutine and the datafile object. In addition, we specify a folder name, and that the date should be used as folder name prefix.
And that's it!
COPYRIGHT AND LICENSE
This software is copyright (c) 2020 by the Lab::Measurement team; in detail:
Copyright 2013 Christian Butschkow, Stefan Geissler
2014 Christian Butschkow
2017 Simon Reinhardt
2018 Andreas K. HuettelThis is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.