/ 
Gtk2-1.023
River stage three • 102 direct dependents • 128 total dependents
/ Gtk2::CodeGen

NAME

Gtk2::CodeGen - code generation utilities for Glib-based bindings.

SYNOPSIS

# usually in Makefile.PL
use Gtk2::CodeGen;

# most common, use all defaults
Gtk2::CodeGen->parse_maps ('myprefix');
Gtk2::CodeGen->write_boot;

# more exotic, change everything
Gtk2::CodeGen->parse_maps ('foo',
                           input => 'foo.maps',
                           header => 'foo-autogen.h',
                           typemap => 'foo.typemap',
                           register => 'register-foo.xsh');
Gtk2::CodeGen->write_boot (filename => 'bootfoo.xsh',
                           glob => 'Foo*.xs',
                           ignore => '^(Foo|Foo::Bar)$');

DESCRIPTION

This module packages some of the boilerplate code needed for performing code generation typically used by perl bindings for gobject-based libraries, using the Glib module as a base.

The default output filenames are in the subdirectory 'build', which usually will be present if you are using ExtUtils::Depends (as most Glib-based extensions probably should).

METHODS

Gtk2::CodeGen->write_boot;
Gtk2::CodeGen->write_boot (KEY => VAL, ...)

Many GObject-based libraries to be bound to perl will be too large to put in a single XS file; however, a single PM file typically only bootstraps one XS file's code. write_boot generates an XSH file to be included from the BOOT section of that one bootstrapped module, calling the boot code for all the other XS files in the project.

Options are passed to the function in a set of key/val pairs, and all options may default.

filename     the name of the output file to be created.
             the default is 'build/boot.xsh'.

glob         a glob pattern that specifies the names of
             the xs files to scan for MODULE lines.
             the default is 'xs/*.xs'.

xs_files     use this to supply an explicit list of file
             names (as an array reference) to use instead
             of a glob pattern.  the default is to use
             the glob pattern.

ignore       regular expression matching any and all 
             module names which should be ignored, i.e.
             NOT included in the list of symbols to boot.
             this parameter is extremely important for
             avoiding infinite loops at startup; see the
             discussion for an explanation and rationale.
             the default is '^[^:]+$', or, any name that
             contains no colons, i.e., any toplevel
             package name.

This function performs a glob (using perl's builtin glob operator) on the pattern specified by the 'glob' option to retrieve a list of file names. It then scans each file in that list for lines matching the pattern "^MODULE" -- that is, the MODULE directive in an XS file. The module name is pulled out and matched against the regular expression specified by the ignore parameter. If this module is not to be ignored, we next check to see if the name has been seen. If not, the name will be converted to a boot symbol (basically, s/:/_/ and prepend "boot_") and this symbol will be added to a call to GPERL_CALL_BOOT in the generated file; it is then marked as seen so we don't call it again.

What is this all about, you ask? In order to bind an XSub to perl, the C function must be registered with the interpreter. This is the function of the "boot" code, which is typically called in the bootstrapping process. However, when multiple XS files are used with only one PM file, some other mechanism must call the boot code from each XS file before any of the function therein will be available.

A typical setup for a multiple-XS, single-PM module will be to call the various bits of boot code from the BOOT: section of the toplevel module's XS file.

To use Gtk2 as an example, when you do 'use Gtk2', Gtk2.pm calls bootstrap on Gtk2, which calls the C function boot_Gtk2. This function calls the boot symbols for all the other xs files in the module. The distinction is that the toplevel module, Gtk2, has no colons in its name.

xsubpp generates the boot function's name by replacing the colons in the MODULE name with underscores and prepending "boot_". We need to be careful not to include the boot code for the bootstrapped module, (say Toplevel, or Gtk2, or whatever) because the bootstrap code in Toplevel.pm will call boot_Toplevel when loaded, and boot_Toplevel should actually includes the file we are creating here.

The default value for the ignore parameter ignores any name not containing colons, because it is assumed that this will be a toplevel module, and any other packages/modules it boots will be below this namespace, i.e., they will contain colons. This assumption holds true for Gtk2 and Gnome2, but obviously fails for something like Gnome2::Canvas. To boot that module properly, you must use a regular expression such as "^Gnome2::Canvas$".

Note that you can, of course, match more than just one name, e.g. "^(Foo|Foo::Bar)$", if you wanted to have Foo::Bar be included in the same dynamically loaded object but only be booted when absolutely necessary. (If you get that to work, more power to you.)

Also, since this code scans for ^MODULE, you must comment the MODULE section out with leading # marks if you want to hide it from write_boot.

Gtk2::CodeGen->parse_maps (PREFIX, [KEY => VAL, ...])

Convention within Glib/Gtk2 and friends is to use preprocessor macros in the style of SvMyType and newSVMyType to get values in and out of perl, and to use those same macros from both hand-written code as well as the typemaps. However, if you have a lot of types in your library (such as the nearly 200 types in Gtk+ 2.x), then writing those macros becomes incredibly tedious, especially so when you factor in all of the variants and such.

So, this function can turn a flat file containing terse descriptions of the types into a header containing all the cast macros, a typemap file using them, and an XSH file containing the proper code to register each of those types (to be included by your module's BOOT code).

The PREFIX is mandatory, and is used in some of the resulting filenames, You can also override the defaults by providing key=>val pairs:

input    input file name.  default is 'maps'
header   name of the header file to create, default is
         build/$prefix-autogen.h
typemap  name of the typemap file to create, default is
         build/$prefix.typemap
register name of the xsh file to contain all of the 
         type registrations, default is build/register.xsh

the maps file is a table of type descriptions, one per line, with fields separated by whitespace. the fields should be:

TYPE macro    e.g., GTK_TYPE_WIDGET 
class name    e.g. GtkWidget, name of the C type
base type     one of GObject, GBoxed, GEnum, GFlags.
              GtkObject is also supported, but the
              distinction is no longer necessary as
              of Glib 0.26.
package       name of the perl package to which this
              class name should be mapped, e.g.
              Gtk2::Widget

BUGS

The distinction between GObject and GtkObject is no longer necessary, but this code hasn't changed because it isn't broken.

GInterfaces are mostly just ignored.

The code is ugly.

AUTHOR

muppet <scott at asofyet dot org>

COPYRIGHT

Copyright (C) 2003 by the gtk2-perl team (see the file AUTHORS for the full list)

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details.

You should have received a copy of the GNU Library General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307 USA.