/ 
Devel-Cover-1.39
River stage three • 63 direct dependents • 118 total dependents
/ Devel::Cover

NAME

Devel::Cover - Code coverage metrics for Perl

VERSION

version 1.39

SYNOPSIS

To get coverage for an uninstalled module:

cover -test

or

cover -delete
HARNESS_PERL_SWITCHES=-MDevel::Cover make test
cover

To get coverage for an uninstalled module which uses Module::Build (0.26 or later):

./Build testcover

If the module does not use the t/*.t framework:

PERL5OPT=-MDevel::Cover make test

If you want to get coverage for a program:

perl -MDevel::Cover yourprog args
cover

To alter default values:

perl -MDevel::Cover=-db,cover_db,-coverage,statement,time yourprog args

DESCRIPTION

This module provides code coverage metrics for Perl. Code coverage metrics describe how thoroughly tests exercise code. By using Devel::Cover you can discover areas of code not exercised by your tests and determine which tests to create to increase coverage. Code coverage can be considered an indirect measure of quality.

Devel::Cover is now quite stable and provides many of the features to be expected in a useful coverage tool.

Statement, branch, condition, subroutine, and pod coverage information is reported. Statement and subroutine coverage data should be accurate. Branch and condition coverage data should be mostly accurate too, although not always what one might initially expect. Pod coverage comes from Pod::Coverage. If Pod::Coverage::CountParents is available it will be used instead.

The cover program can be used to generate coverage reports. Devel::Cover ships with a number of reports including various types of HTML output, textual reports, a report to display missing coverage in the same format as compilation errors and a report to display coverage information within the Vim editor.

It is possible to add annotations to reports, for example you can add a column to an HTML report showing who last changed a line, as determined by git blame. Some annotation modules are shipped with Devel::Cover and you can easily create your own.

The gcov2perl program can be used to convert gcov files to Devel::Cover databases. This allows you to display your C or XS code coverage together with your Perl coverage, or to use any of the Devel::Cover reports to display your C coverage data.

Code coverage data are collected by replacing perl ops with functions which count how many times the ops are executed. These data are then mapped back to reality using the B compiler modules. There is also a statement profiling facility which should not be relied on. For proper profiling use Devel::NYTProf. Previous versions of Devel::Cover collected coverage data by replacing perl's runops function. It is still possible to switch to that mode of operation, but this now gets little testing and will probably be removed soon. You probably don't care about any of this.

The most appropriate mailing list on which to discuss this module would be perl-qa. See http://lists.perl.org/list/perl-qa.html.

The Devel::Cover repository can be found at http://github.com/pjcj/Devel--Cover. This is also where problems should be reported.

REQUIREMENTS AND RECOMMENDED MODULES

REQUIREMENTS

  • Perl 5.12.0 or greater.

    The latest version of Devel::Cover on which Perl 5.10 was supported was 1.38. The latest version of Devel::Cover on which Perl 5.8 was supported was 1.23. Perl versions 5.6.1 and 5.6.2 were not supported after version 1.22. Perl versions 5.6.0 and earlier were never supported. Using Devel::Cover with Perl 5.8.7 was always problematic and frequently lead to crashes.

    Different versions of perl may give slightly different results due to changes in the op tree.

  • The ability to compile XS extensions.

    This means a working C compiler and make program at least. If you built perl from source you will have these already and they will be used automatically. If your perl was built in some other way, for example you may have installed it using your Operating System's packaging mechanism, you will need to ensure that the appropriate tools are installed.

  • Storable and Digest::MD5

    Both are in the core in Perl 5.8.0 and above.

OPTIONAL MODULES

Use with mod_perl

By adding use Devel::Cover; to your mod_perl startup script, you should be able to collect coverage information when running under mod_perl. You can also add any options you need at this point. I would suggest adding this as early as possible in your startup script in order to collect as much coverage information as possible.

Alternatively, add -MDevel::Cover to the parameters for mod_perl. In this example, Devel::Cover will be operating in silent mode.

PerlSwitches -MDevel::Cover=-silent,1

OPTIONS

-blib               - "use blib" and ignore files matching \bt/ (default true
                      if blib directory exists, false otherwise)
-coverage criterion - Turn on coverage for the specified criterion.  Criteria
                      include statement, branch, condition, path, subroutine,
                      pod, time, all and none (default all available)
-db cover_db        - Store results in coverage db (default ./cover_db)
-dir path           - Directory in which coverage will be collected (default
                      cwd)
-ignore RE          - Set regular expressions for files to ignore (default
                      "/Devel/Cover\b")
+ignore RE          - Append to regular expressions of files to ignore
-inc path           - Set prefixes of files to include (default @INC)
+inc path           - Append to prefixes of files to include
-loose_perms val    - Use loose permissions on all files and directories in
                      the coverage db so that code changing EUID can still
                      write coverage information (default off)
-merge val          - Merge databases, for multiple test benches (default on)
-select RE          - Set regular expressions of files to select (default none)
+select RE          - Append to regular expressions of files to select
-silent val         - Don't print informational messages (default off)
-subs_only val      - Only cover code in subroutine bodies (default off)
-replace_ops val    - Use op replacing rather than runops (default on)
-summary val        - Print summary information if val is true (default on)

More on Coverage Options

You can specify options to some coverage criteria. At the moment only pod coverage takes any options. These are the parameters which are passed into the Pod::Coverage constructor. The extra options are separated by dashes, and you may specify as many as you wish. For example, to specify that all subroutines containing xx are private, call Devel::Cover with the option -coverage,pod-also_private-xx.

Or, to ignore all files in t/lib as well as files ending in Foo.pm:

cover -test -silent -ignore ^t/lib/,Foo.pm$

Note that -ignore replaces any default ignore regexes. To preserve any ignore regexes which have already been set, use +ignore:

cover -test -silent +ignore ^t/lib/,Foo.pm$

SELECTING FILES TO COVER

You may select the files for which you want to collect coverage data using the select, ignore and inc options. The system uses the following procedure to decide whether a file will be included in coverage reports:

  • If the file matches a RE given as a select option, it will be included

  • Otherwise, if it matches a RE given as an ignore option, it won't be included

  • Otherwise, if it is in one of the inc directories, it won't be included

  • Otherwise, it will be included

You may add to the REs to select by using +select, or you may reset the selections using -select. The same principle applies to the REs to ignore.

The inc directories are initially populated with the contents of perl's @INC array. You may reset these directories using -inc, or add to them using +inc.

Although these options take regular expressions, you should not enclose the RE within // or any other quoting characters.

The options -coverage, [+-]select, [+-]ignore and [+-]inc can be specified multiple times, but they can also take multiple comma separated arguments. In any case you should not add a space after the comma, unless you want the argument to start with that literal space.

UNCOVERABLE CRITERIA

Sometimes you have code which is uncoverable for some reason. Perhaps it is an else clause that cannot be reached, or a check for an error condition that should never happen. You can tell Devel::Cover that certain criteria are uncoverable and then they are not counted as errors when they are not exercised. In fact, they are counted as errors if they are exercised.

This feature should only be used as something of a last resort. Ideally you would find some way of exercising all your code. But if you have analysed your code and determined that you are not going to be able to exercise it, it may be better to record that fact in some formal fashion and stop Devel::Cover complaining about it, so that real problems are not lost in the noise.

If you have uncoverable criteria I suggest not using the default HTML report (with uses html_minimal at the moment) because this sometimes shows uncoverable points as uncovered. Instead, you should use the html_basic report for HTML output which should behave correctly in this regard.

There are two ways to specify a construct as uncoverable, one invasive and one non-invasive.

Invasive specification

You can use special comments in your code to specify uncoverable criteria. Comments are of the form:

# uncoverable <criterion> [details]

The keyword "uncoverable" must be the first text in the comment. It should be followed by the name of the coverage criterion which is uncoverable. There may then be further information depending on the nature of the uncoverable construct.

Statements

The "uncoverable" comment should appear on either the same line as the statement, or on the line before it:

$impossible++;  # uncoverable statement
# uncoverable statement
it_has_all_gone_horribly_wrong();

If there are multiple statements (or any other criterion) on a line you can specify which statement is uncoverable by using the "count" attribute, count:n, which indicates that the uncoverable statement is the nth statement on the line.

# uncoverable statement count:1
# uncoverable statement count:2
cannot_run_this(); or_this();

Branches

The "uncoverable" comment should specify whether the "true" or "false" branch is uncoverable.

# uncoverable branch true
if (pi == 3)

Both branches may be uncoverable:

# uncoverable branch true
# uncoverable branch false
if (impossible_thing_happened_one_way()) {
    handle_it_one_way();      # uncoverable statement
} else {
    handle_it_another_way();  # uncoverable statement
}

If there is an elsif in the branch then it can be addressed as the second branch on the line by using the "count" attribute. Further elsifs are the third and fourth "count" value, and so on:

# uncoverable branch false count:2
if ($thing == 1) {
    handle_thing_being_one();
} elsif ($thing == 2) {
    handle_thing_being_tow();
} else {
    die "thing can only be one or two, not $thing"; # uncoverable statement
}

Conditions

Because of the way in which Perl short-circuits boolean operations, there are three ways in which such conditionals can be uncoverable. In the case of $x && $y for example, the left operator may never be true, the right operator may never be true, and the whole operation may never be false. These conditions may be modelled thus:

# uncoverable branch true
# uncoverable condition left
# uncoverable condition false
if ($x && !$y) {
    $x++;  # uncoverable statement
}

# uncoverable branch true
# uncoverable condition right
# uncoverable condition false
if (!$x && $y) {
}

Or conditionals are handled in a similar fashion (TODO - provide some examples) but xor conditionals are not properly handled yet.

As for branches, the "count" value may be used for either conditions in elsif conditionals, or for complex conditions.

Subroutines

A subroutine should be marked as uncoverable at the point where the first statement is marked as uncoverable. Ideally all other criteria in the subroutine would be marked as uncoverable automatically, but that isn't the case at the moment.

sub z {
    # uncoverable subroutine
    $y++; # uncoverable statement
}

Non-invasive specification

If you can't, or don't want to add coverage comments to your code, you can specify the uncoverable information in a separate file. By default the files PWD/.uncoverable and HOME/.uncoverable are checked. If you use the -uncoverable_file parameter then the file you provide is checked as well as those two files.

The interface to managing this file is the cover program, and the options are:

-uncoverable_file
-add_uncoverable_point
-delete_uncoverable_point   **UNIMPLEMENTED**
-clean_uncoverable_points   **UNIMPLEMENTED**

The parameter for -add_uncoverable_point is a string composed of up to seven space separated elements: "$file $criterion $line $count $type $class $note".

The contents of the uncoverable file is the same, with one point per line.

ENVIRONMENT

User variables

The -silent option is turned on when Devel::Cover is invoked via $HARNESS_PERL_SWITCHES or $PERL5OPT. Devel::Cover tries to do the right thing when $MOD_PERL is set. $DEVEL_COVER_OPTIONS is appended to any options passed into Devel::Cover.

Note that when Devel::Cover is invoked via an environment variable, any modules specified on the command line, such as via the -Mmodule option, will not be covered. This is because the environment variables are processed after the command line and any code to be covered must appear after Devel::Cover has been loaded. To work around this, Devel::Cover can also be specified on the command line.

Developer variables

When running Devel::Cover's own test suite, $DEVEL_COVER_DEBUG turns on debugging information, $DEVEL_COVER_GOLDEN_VERSION overrides Devel::Cover's own idea of which golden results it should test against, and $DEVEL_COVER_NO_COVERAGE runs the tests without collecting coverage. $DEVEL_COVER_DB_FORMAT may be set to "Sereal", "JSON" or "Storable" to override the default choice of DB format (Sereal, then JSON if either are available, otherwise Storable). $DEVEL_COVER_IO_OPTIONS provides fine-grained control over the DB format. For example, setting it to "pretty" when the format is JSON will store the DB in a readable JSON format. $DEVEL_COVER_CPUS overrides the automated detection of the number of CPUs to use in parallel testing.

ACKNOWLEDGEMENTS

Some code and ideas cribbed from:

SEE ALSO

LIMITATIONS

There are things that Devel::Cover can't cover.

Absence of shared dependencies

Perl keeps track of which modules have been loaded (to avoid reloading them). Because of this, it isn't possible to get coverage for a path where a runtime import fails if the module being imported is one that Devel::Cover uses internally. For example, suppose your program has this function:

sub foo {
    eval { require Storable };
    if ($@) {
        carp "Can't find Storable";
        return;
    }
    # ...
}

You might write a test for the failure mode as

BEGIN { @INC = () }
foo();
# check for error message

Because Devel::Cover uses Storable internally, the import will succeed (and the test will fail) under a coverage run.

Modules used by Devel::Cover while gathering coverage:

Redefined subroutines

If you redefine a subroutine you may find that the original subroutine is not reported on. This is because I haven't yet found a way to locate the original CV. Hints, tips or patches to resolve this will be gladly accepted.

The module Test::TestCoverage uses this technique and so should not be used in conjunction with Devel::Cover.

BUGS

Almost certainly.

See the BUGS file, the TODO file and the bug trackers at https://github.com/pjcj/Devel--Cover/issues?sort=created&direction=desc&state=open and https://rt.cpan.org/Public/Dist/Display.html?Name=Devel-Cover

Please report new bugs on Github.

LICENCE

Copyright 2001-2022, Paul Johnson (paul@pjcj.net)

This software is free. It is licensed under the same terms as Perl itself.

The latest version of this software should be available on CPAN and from my homepage: http://www.pjcj.net/.