Why not adopt me?

This distribution is up for adoption! If you're interested then please contact the PAUSE module admins via email.

NAME

perlmogrify - Command-line interface to transform Perl source.

SYNOPSIS

perlmogrify [-12345 | --brutal | --cruel | --harsh | --stern | --gentle]
            [--severity number | name] [{-p | --profile} file | --noprofile]
            [--top [ number ]] [--theme expression] [--include pattern]
            [--exclude pattern] [{-s | --single-policy} pattern]
            [--only | --noonly] [--profile-strictness {warn|fatal|quiet}]
            [--force | --noforce] [--statistics] [--statistics-only]
            [--count | -C] [--verbose {number | format}] [--allow-unsafe]
            [--color | --nocolor] [--pager pager] [--quiet]
            [--color-severity-highest color_specification]
            [--color-severity-high color_specification]
            [--color-severity-medium color_specification]
            [--color-severity-low color_specification]
            [--color-severity-lowest color_specification]
            [--files-with-transformations | -l]
            [--files-without-transformations | -L]
            [--program-extensions file_name_extension]
            {FILE | DIRECTORY | STDIN}

perlmogrify --profile-proto

perlmogrify { --list | --list-enabled | --list-themes | --doc pattern [...] }

perlmogrify { --help | --options | --man | --version }

DESCRIPTION

perlmogrify is a Perl source code analyzer. It is the executable front-end to the Perl::ToPerl6 engine, which attempts to identify awkward, hard to read, error-prone, or unconventional constructs in your code. Most of the rules are based on Damian Conway's book Perl Best Practices. However, perlmogrify is not limited to enforcing PBP, and it will even support rules that contradict Conway. All rules can easily be configured or disabled to your liking.

This documentation only covers how to drive this command. For all other information, such as API reference and alternative interfaces, please see the documentation for Perl::ToPerl6 itself.

USAGE EXAMPLES

Before getting into all the gory details, here are some basic usage examples to help get you started.

# Report only most severe transformations (severity = 5)
perlmogrify YourModule.pm

# Same as above, but read input from STDIN
perlmogrify

# Recursively process all Perl files beneath directory
perlmogrify /some/directory

# Report slightly less severe transformations too (severity >= 4)
perlmogrify -4 YourModule.pm

# Same as above, but using named severity level
perlmogrify --stern YourModule.pm

# Report all transformations, regardless of severity (severity >= 1)
perlmogrify -1 YourModule.pm

# Same as above, but using named severity level
perlmogrify --brutal YourModule.pm

# Report only transformations of things from "Perl Best Practices"
perlmogrify --theme pbp YourModule.pm

# Report top 20 most severe transformations (severity >= 1)
perlmogrify --top YourModule.pm

# Report additional transformations of Policies that match m/variables/xms
perlmogrify --include variables YourModule.pm

# Use defaults from somewhere other than ~/.perlmogrifyrc
perlmogrify --profile project/specific/perlmogrifyrc YourModule.pm

ARGUMENTS

The arguments are paths to the files you wish to analyze. You may specify multiple files. If an argument is a directory, perlmogrify will analyze all Perl files below the directory. If no arguments are specified, then input is read from STDIN.

OPTIONS

Option names can be abbreviated to uniqueness and can be stated with singe or double dashes, and option values can be separated from the option name by a space or '=' (as with Getopt::Long). Option names are also case-sensitive.

--profile FILE or -p FILE

Directs perlmogrify to use a profile named by FILE rather than looking for the default .perlmogrifyrc file in the current directory or your home directory. See "CONFIGURATION" in Perl::ToPerl6 for more information.

--noprofile

Directs perlmogrify not to load any configuration file, thus reverting to the default configuration for all Policies.

--severity N

Directs perlmogrify to only apply Policies with a severity greater than N. Severity values are integers ranging from 1 (least severe) to 5 (most severe). The default is 5. For a given --profile, decreasing the --severity will usually produce more transformations. You can set the default value for this option in your .perlmogrifyrc file. You can also redefine the severity for any Transformer in your .perlmogrifyrc file. See "CONFIGURATION" for more information.

-5 | -4 | -3 | -2 | -1

These are numeric shortcuts for setting the --severity option. For example, "-4" is equivalent to "--severity 4". If multiple shortcuts are specified, then the most restrictive one wins. If an explicit --severity option is also given, then all shortcut options are silently ignored. NOTE: Be careful not to put one of the number severity shortcut options immediately after the --top flag or perlmogrify will interpret it as the number of transformations to report.

--severity NAME

If it is difficult for you to remember whether severity "5" is the most or least restrictive level, then you can use one of these named values:

SEVERITY NAME   ...is equivalent to...   SEVERITY NUMBER
--------------------------------------------------------
--severity gentle                           --severity 5
--severity stern                            --severity 4
--severity harsh                            --severity 3
--severity cruel                            --severity 2
--severity brutal                           --severity 1

--gentle | --stern | --harsh | --cruel | --brutal

These are named shortcuts for setting the --severity option. For example, "--cruel" is equivalent to "--severity 2". If multiple shortcuts are specified, then the most restrictive one wins. If an explicit --severity option is also given, then all shortcut options are silently ignored.

--theme RULE

Directs perlmogrify to apply only Policies with themes that satisfy the RULE. Themes are arbitrary names for groups of related transformers. You can combine theme names with boolean operators to create an arbitrarily complex RULE. For example, the following would apply only Policies that have a 'bugs' AND 'pbp' theme:

$> perlmogrify --theme='bugs && pbp' MyModule.pm

Unless the --severity option is explicitly given, setting --theme silently causes the --severity to be set to 1. You can set the default value for this option in your .perlmogrifyrc file. See "POLICY THEMES" in Perl::ToPerl6 for more information about themes.

--include PATTERN

Directs perlmogrify to apply additional Policies that match the regex /PATTERN/imx. Use this option to temporarily override your profile and/or the severity settings at the command-line. For example:

perlmogrify --include=layout my_file.pl

This would cause perlmogrify to apply all the CodeLayout::* transformers even if they have a severity level that is less than the default level of 5, or have been disabled in your .perlmogrifyrc file. You can specify multiple --include options and you can use it in conjunction with the --exclude option. Note that --exclude takes precedence over --include when a Transformer matches both patterns. You can set the default value for this option in your .perlmogrifyrc file.

--exclude PATTERN

Directs perlmogrify to not apply any Transformer that matches the regex /PATTERN/imx. Use this option to temporarily override your profile and/or the severity settings at the command-line. For example:

perlmogrify --exclude=strict my_file.pl

This would cause perlmogrify to not apply the RequireUseStrict and ProhibitNoStrict Policies even though they have the highest severity level. You can specify multiple --exclude options and you can use it in conjunction with the --include option. Note that --exclude takes precedence over --include when a Transformer matches both patterns. You can set the default value for this option in your .perlmogrifyrc file.

--single-policy PATTERN or -s PATTERN

Directs perlmogrify to apply just one Transformer module matching the regex /PATTERN/ixms, and exclude all other Policies. This option has precedence over the --severity, --theme, --include, --exclude, and --only options. For example:

perlmogrify --single-policy=nowarnings my_file.pl

This would cause perlmogrify to apply just the ProhibitNoWarnings Transformer, regardless of the severity level setting. No other Policies would be applied.

This is equivalent to what one might intend by...

perlmogrify --exclude=. --include=nowarnings my_file.pl

... but this won't work because the --exclude option overrides the --include option.

The equivalent of this option can be accomplished by creating a custom profile containing only the desired policy and then running...

perlmogrify --profile=customprofile --only my_file.pl

--top [ N ]

Directs perlmogrify to report only the top N Transformer transformations in each file, ranked by their severity. If N is not specified, it defaults to 20. If the --severity option (or one of the shortcuts) is not explicitly given, the --top option implies that the minimum severity level is "1" (i.e. "brutal"). Users can redefine the severity for any Transformer in their .perlmogrifyrc file. See "CONFIGURATION" for more information. You can set the default value for this option in your .perlmogrifyrc file. NOTE: Be careful not to put one of the severity shortcut options immediately after the --top flag or perlmogrify will interpret it as the number of transformations to report.

--force

Directs perlmogrify to ignore the magical "## no mogrify" annotations in the source code. See "BENDING THE RULES" for more information. You can set the default value for this option in your .perlmogrifyrc file.

--statistics

Causes several statistics about the code being scanned and the transformations found to be reported after any other output.

--statistics-only

Like the --statistics option, but suppresses normal output and only shows the statistics.

--verbose N | FORMAT

Sets the verbosity level or format for reporting transformations. If given a number (N), perlmogrify reports transformations using one of the predefined formats described below. If given a string (FORMAT), it is interpreted to be an actual format specification. If the --verbose option is not specified, it defaults to either 4 or 5, depending on whether multiple files were given as arguments to perlmogrify. You can set the default value for this option in your .perlmogrifyrc file.

Verbosity     Format Specification
-----------   -------------------------------------------------------
 1            "%f:%l:%c:%m\n",
 2            "%f: (%l:%c) %m\n",
 3            "%m at %f line %l\n",
 4            "%m at line %l, column %c.  %e.  (Severity: %s)\n",
 5            "%f: %m at line %l, column %c.  %e.  (Severity: %s)\n",
 6            "%m at line %l, near '%r'.  (Severity: %s)\n",
 7            "%f: %m at line %l near '%r'.  (Severity: %s)\n",
 8            "[%p] %m at line %l, column %c.  (Severity: %s)\n",
 9            "[%p] %m at line %l, near '%r'.  (Severity: %s)\n",
10            "%m at line %l, column %c.\n  %p (Severity: %s)\n%d\n",
11            "%m at line %l, near '%r'.\n  %p (Severity: %s)\n%d\n"

Formats are a combination of literal and escape characters similar to the way sprintf works. See String::Format for a full explanation of the formatting capabilities. Valid escape characters are:

Escape    Meaning
-------   ------------------------------------------------------------
%c        Column number where the transformation occurred
%d        Full diagnostic discussion of the transformation
%e        Explanation of transformation
%F        Just the name of the file where the transformation occurred.
%f        Path to the file where the transformation occurred.
%l        Line number where the transformation occurred
%m        Brief description of the transformation
%P        Full name of the Transformer module that created the transformation
%p        Name of the Transformer without the Perl::ToPerl6::Transformer:: prefix
%r        The string of source code that caused the transformation
%C        The class of the PPI::Element that caused the transformation
%s        The severity level of the transformation

The purpose of these formats is to provide some compatibility with text editors that have an interface for parsing certain kinds of input. See "EDITOR INTEGRATION" for more information about that.

--list

Displays a condensed listing of all the Perl::ToPerl6::Transformer modules that are found on this machine. This option lists all Policies, regardless of your .perlmogrifyrc or command line options. For each Transformer, the name, default severity and default themes are shown.

--list-enabled

Displays a condensed listing of all the Perl::ToPerl6::Transformer modules that would be enforced, if you were actually going to transform a file with this command. This is useful when you've constructed a complicated command or modified your .perlmogrifyrc file and you want to see exactly which Policies are going to be enforced (or not enforced, as the case may be). For each Transformer, the name, default severity and default themes are shown.

--list-themes

Displays a list of all the themes of the Perl::ToPerl6::Transformer modules that are found on this machine.

--profile-proto

Displays an expanded listing of all the Perl::ToPerl6::Transformer modules that are found on this machine. For each Transformer, the name, default severity and default themes are shown, as well as the name of any additional parameters that the Transformer supports. The format is suitable as a prototype for your .perlmogrifyrc file.

--only

Directs perlmogrify to apply only Policies that are explicitly mentioned in your .perlmogrifyrc file. This is useful if you want to use just a small subset of Policies without having to disable all the others. You can set the default value for this option in your .perlmogrifyrc file.

--profile-strictness {warn|fatal|quiet}

Directs perlmogrify how to treat certain recoverable problems found in a .perlmogrifyrc or file specified via the --profile option. Valid values are warn (the default), fatal, and quiet. For example, perlmogrify normally only warns about profiles referring to non-existent Policies, but this option can make this situation fatal. You can set the default value for this option in your .perlmogrifyrc file.

--count

-C

Display only the number of transformations for each file. Use this feature to get a quick handle on where a large pile of code might need the most attention.

--Safari

Report "Perl Best Practice" citations as section numbers from http://safari.oreilly.com instead of page numbers from the actual book. NOTE: This feature is not implemented yet.

--color =item --colour

This option is on when outputting to a tty. When set, Severity 5 and 4 are colored red and yellow, respectively. Colorization only happens if Term::ANSIColor is installed and it only works on non-Windows environments. Negate this switch to disable color. You can set the default value for this option in your .perlmogrifyrc file.

--pager PAGER_COMMAND_STRING

If set, perlmogrify will pipe it's output to the given PAGER_COMMAND_STRING. You can set the default value for this option in your .perlmogrifyrc file.

Setting a pager turns off color by default. You will have to turn color on explicitly. If you want color, you'll probably also want to tell your pager to display raw characters. For less and more, use the -R switch.

--color-severity-highest COLOR_SPECIFICATION

Specifies the color to be used for highest severity transformations, as a Term::ANSIColor color specification. Can also be specified as --colour- severity-highest, --color-severity-5, or --colour-severity-5.

--color-severity-high COLOR_SPECIFICATION

Specifies the color to be used for high severity transformations, as a Term::ANSIColor color specification. Can also be specified as --colour- severity-high, --color-severity-4, or --colour-severity-4.

--color-severity-medium COLOR_SPECIFICATION

Specifies the color to be used for medium severity transformations, as a Term::ANSIColor color specification. Can also be specified as --colour- severity-medium, --color-severity-3, or --colour-severity-3.

--color-severity-low COLOR_SPECIFICATION

Specifies the color to be used for low severity transformations, as a Term::ANSIColor color specification. Can also be specified as --colour- severity-low, --color-severity-2, or --colour-severity-2.

--color-severity-lowest COLOR_SPECIFICATION

Specifies the color to be used for lowest severity transformations, as a Term::ANSIColor color specification. Can also be specified as --colour- severity-lowest, --color-severity-1, or --colour-severity-1.

--files-with-transformations

Display only the names of files with transformations. Use this feature with --single-policy to find files that contain transformations of a given policy. Can also be specified as --l.

--files-without-transformations

Display only the names of files without transformations. Use this feature with --single-policy to find files that do not contain transformations of a given policy. Can also be specified as --L.

--program-extensions file_name_extension

Tell perlmogrify to treat files whose names end in the given file name extension as programs, not as modules. If a leading '.' is desired it must be explicitly specified, e.g.

--program-extensions .pl

The matching is case-sensitive, and the option may be specified as many times as desired, e.g.

--program-extensions .pl --program-extensions .cgi

The above can also be done by quoting the file name extensions:

--program-extensions '.pl .cgi'

Files whose name ends in '.PL' will always be considered programs.

--doc PATTERN

Displays the perldoc for all Perl::ToPerl6::Transformer modules that match m/PATTERN/ixms. Since Transformer modules tend to have rather long names, this just provides a more convenient way to say something like: "perldoc Perl::ToPerl6::Transformer::ValuesAndExpressions::RequireUpperCaseH eredocTerminator" at the command prompt.

--allow-unsafe

This option directs perlmogrify to allow the use of Policies that have been marked as "unsafe". Unsafe Policies may result in risky operations by compiling and executing the code they analyze. All the Policies that ship in the core Perl::ToPerl6 distribution are safe. However, third- party Policies, such as those in the Perl::ToPerl6::Dynamic distribution are not safe. Note that "safety" is honorary -- if a Transformer author marks a Transformer as safe, it is not a guarantee that it won't do nasty things. If you don't trust your Policies and the code you are analyzing, then do not use this switch.

--quiet

Suppress the "source OK" message when no transformations are found.

--help

-?

-H

Displays a brief summary of options and exits.

--options

Displays the descriptions of the options and exits. While this output is long, it it nowhere near the length of the output of --man.

--man

Displays the complete perlmogrify manual and exits.

--version

-V

Displays the version number of perlmogrify and exits.

CONFIGURATION

Most of the settings for Perl::ToPerl6 and each of the Transformer modules can be controlled by a configuration file. The default configuration file is called .perlmogrifyrc. perlmogrify will look for this file in the current directory first, and then in your home directory. Alternatively, you can set the PERLMOGRIFY environment variable to explicitly point to a different file in another location. If none of these files exist, and the --profile option is not given on the command-line, then all Policies will be loaded with their default configuration.

The format of the configuration file is a series of INI-style blocks that contain key-value pairs separated by "=". Comments should start with "#" and can be placed on a separate line or after the name-value pairs if you desire.

Default settings for perlmogrify itself can be set before the first named block. For example, putting any or all of these at the top of your .perlmogrifyrc file will set the default value for the corresponding command-line argument.

severity  = 3                                     #Integer or named level
only      = 1                                     #Zero or One
force     = 0                                     #Zero or One
verbose   = 4                                     #Integer or format spec
top       = 50                                    #A positive integer
theme     = (pbp + security) * bugs               #A theme expression
include   = NamingConventions ClassHierarchies    #Space-delimited list
exclude   = Variables  Modules::RequirePackage    #Space-delimited list

The remainder of the configuration file is a series of blocks like this:

[Perl::ToPerl6::Transformer::Category::TransformerName]
severity = 1
set_themes = foo bar
add_themes = baz
arg1 = value1
arg2 = value2

Perl::ToPerl6::Transformer::Category::TransformerName is the full name of a module that implements the policy. The Transformer modules distributed with Perl::ToPerl6 have been grouped into categories according to the table of contents in Damian Conway's book Perl Best Practices. For brevity, you can omit the 'Perl::ToPerl6::Transformer' part of the module name.

severity is the level of importance you wish to assign to the Transformer. All Transformer modules are defined with a default severity value ranging from 1 (least severe) to 5 (most severe). However, you may disagree with the default severity and choose to give it a higher or lower severity, based on your own coding philosophy. You can set the severity to an integer from 1 to 5, or use one of the equivalent names:

SEVERITY NAME ...is equivalent to... SEVERITY NUMBER
----------------------------------------------------
gentle                                             5
stern                                              4
harsh                                              3
cruel                                              2
brutal                                             1

set_themes sets the theme for the Transformer and overrides its default theme. The argument is a string of one or more whitespace-delimited alphanumeric words. Themes are case-insensitive. See "POLICY THEMES" for more information.

add_themes appends to the default themes for this Transformer. The argument is a string of one or more whitespace-delimited words. Themes are case- insensitive. See "POLICY THEMES" for more information.

The remaining key-value pairs are configuration parameters that will be passed into the constructor of that Transformer. The constructors for most Transformer modules do not support arguments, and those that do should have reasonable defaults. See the documentation on the appropriate Transformer module for more details.

Instead of redefining the severity for a given Transformer, you can completely disable a Transformer by prepending a '-' to the name of the module in your configuration file. In this manner, the Transformer will never be loaded, regardless of the --severity given on the command line.

A simple configuration might look like this:

#--------------------------------------------------------------
# I think these are really important, so always load them

[TestingAndDebugging::RequireUseStrict]
severity = 5

[TestingAndDebugging::RequireUseWarnings]
severity = 5

#--------------------------------------------------------------
# I think these are less important, so only load when asked

[Variables::ProhibitPackageVars]
severity = 2

[ControlStructures::ProhibitPostfixControls]
allow = if unless  # My custom configuration
severity = cruel   # Same as "severity = 2"

#--------------------------------------------------------------
# Give these transformers a custom theme.  I can activate just
# these transformers by saying "perlmogrify --theme 'larry || curly'"

[Modules::RequireFilenameMatchesPackage]
add_themes = larry

[TestingAndDebugging::RequireTestLabels]
add_themes = curly moe

#--------------------------------------------------------------
# I do not agree with these at all, so never load them

[-NamingConventions::Capitalization]
[-ValuesAndExpressions::ProhibitMagicNumbers]

#--------------------------------------------------------------
# For all other Policies, I accept the default severity,
# so no additional configuration is required for them.

Note that all transformers included with the Perl::ToPerl6 distribution that have integer parameters accept underscores ("_") in their values, as with Perl numeric literals. For example,

[ValuesAndExpressions::RequireNumberSeparators]
min_value = 1_000

For additional configuration examples, see the perlmogrifyrc file that is included in this examples directory of this distribution.

Damian Conway's own Perl::ToPerl6 configuration is also included in this distribution as examples/perlmogrifyrc-conway.

THE POLICIES

A large number of Transformer modules are distributed with Perl::ToPerl6. They are described briefly in the companion document Perl::ToPerl6::TransformerSummary and in more detail in the individual modules themselves. Say "perlmogrify --doc PATTERN" to see the perldoc for all Transformer modules that match the regex m/PATTERN/ixms

There are a number of distributions of additional transformers on CPAN. If Perl::ToPerl6 doesn't contain a policy that you want, some one may have already written it. See "SEE ALSO" in Perl::ToPerl6 for a list of some of these distributions.

POLICY THEMES

Each Transformer is defined with one or more "themes". Themes can be used to create arbitrary groups of Policies. They are intended to provide an alternative mechanism for selecting your preferred set of Policies. For example, you may wish disable a certain set of Policies when analyzing test programs. Conversely, you may wish to enable only a specific subset of Policies when analyzing modules.

The Policies that ship with Perl::ToPerl6 are have been divided into the following themes. This is just our attempt to provide some basic logical groupings. You are free to invent new themes that suit your needs.

THEME             DESCRIPTION
------------------------------------------------------------------------
core              All transformers that ship with Perl::ToPerl6
pbp               Policies that come directly from "Perl Best Practices"
bugs              Policies that that prevent or reveal bugs
certrec           Policies that CERT recommends
certrule          Policies that CERT considers rules
maintenance       Policies that affect the long-term health of the code
cosmetic          Policies that only have a superficial effect
complexity        Policies that specificaly relate to code complexity
security          Policies that relate to security issues
tests             Policies that are specific to test programs

Say "perlmogrify --list" to get a listing of all available transformers and the themes that are associated with each one. You can also change the theme for any Transformer in your .perlmogrifyrc file. See the "CONFIGURATION" section for more information about that.

Using the --theme command-line option, you can create an arbitrarily complex rule that determines which Policies to apply. Precedence is the same as regular Perl code, and you can use parentheses to enforce precedence as well. Supported operators are:

Operator    Altertative    Example
-----------------------------------------------------------------
&&          and            'pbp && core'
||          or             'pbp || (bugs && security)'
!           not            'pbp && ! (portability || complexity)'

Theme names are case-insensitive. If the --theme is set to an empty string, then it evaluates as true all Policies.

BENDING THE RULES

Perl::ToPerl6 takes a hard-line approach to your code: either you comply or you don't. In the real world, it is not always practical (or even possible) to fully comply with coding standards. In such cases, it is wise to show that you are knowingly violating the standards and that you have a Damn Good Reason (DGR) for doing so.

To help with those situations, you can direct Perl::ToPerl6 to ignore certain lines or blocks of code by using annotations:

require 'LegacyLibaray1.pl';  ## no mogrify
require 'LegacyLibrary2.pl';  ## no mogrify

for my $element (@list) {

    ## no mogrify

    $foo = "";               #Violates 'ProhibitEmptyQuotes'
    $barf = bar() if $foo;   #Violates 'ProhibitPostfixControls'
    #Some more evil code...

    ## use mogrify

    #Some good code...
    do_something($_);
}

The "## no mogrify" annotations direct Perl::ToPerl6 to ignore the remaining lines of code until a "## use mogrify" annotation is found. If the "## no mogrify" annotation is on the same line as a code statement, then only that line of code is overlooked. To direct perlmogrify to ignore the "## no mogrify" annotations, use the --force option.

A bare "## no mogrify" annotation disables all the active Policies. If you wish to disable only specific Policies, add a list of Transformer names as arguments just as you would for the "no strict" or "no warnings" pragma. For example, this would disable the ProhibitEmptyQuotes and ProhibitPostfixControls transformers until the end of the block or until the next "## use mogrify" annotation (whichever comes first):

## no mogrify (EmptyQuotes, PostfixControls);

# Now exempt from ValuesAndExpressions::ProhibitEmptyQuotes
$foo = "";

# Now exempt ControlStructures::ProhibitPostfixControls
$barf = bar() if $foo;

# Still subject to ValuesAndExpression::RequireNumberSeparators
$long_int = 10000000000;

Since the Transformer names are matched against the "## no mogrify" arguments as regular expressions, you can abbreviate the Transformer names or disable an entire family of Policies in one shot like this:

## no mogrify (NamingConventions)

# Now exempt from NamingConventions::Capitalization
my $camelHumpVar = 'foo';

# Now exempt from NamingConventions::Capitalization
sub camelHumpSub {}

The argument list must be enclosed in parentheses and must contain one or more comma-separated barewords (i.e. don't use quotes). The "## no mogrify" annotations can be nested, and Policies named by an inner annotation will be disabled along with those already disabled an outer annotation.

Some Policies like Subroutines::ProhibitExcessComplexity apply to an entire block of code. In those cases, "## no mogrify" must appear on the line where the transformations is reported. For example:

sub complicated_function {  ## no mogrify (ProhibitExcessComplexity)
    # Your code here...
}

Some Policies like Documentation::RequirePodSections apply to the entire document, in which case transformations are reported at line 1. But if the file requires a shebang line, it is impossible to put "## no mogrify" on the first line of the file. This is a known limitation and it will be addressed in a future release. As a workaround, you can disable the affected transformers at the command-line or in your .perlmogrifyrc file. But beware that this will affect the analysis of all files.

Use this feature wisely. "## no mogrify" should be used in the smallest possible scope, or only on individual lines of code. And you should always be as specific as possible about which transformers you want to disable (i.e. never use a bare "## no mogrify"). If Perl::ToPerl6 complains about your code, try and find a compliant solution before resorting to this feature.

EDITOR INTEGRATION

For ease-of-use, perlmogrify can be integrated with your favorite text editor. The output-formatting capabilities of perlmogrify are specifically intended for use with the "grep" or "compile" modes available in editors like emacs and vim. In these modes, you can run an arbitrary command and the editor will parse the output into an interactive buffer that you can click on and jump to the relevant line of code.

The Perl::ToPerl6 team thanks everyone who has helped integrate Perl-ToPerl6 with their favorite editor. Your contributions in particular have made Perl- ToPerl6 a convenient and user-friendly tool for Perl developers of all stripes. We sincerely appreciate your hard work.

EMACS

Joshua ben Jore has authored a minor-mode for emacs that allows you to run perlmogrify on the current region or buffer. You can run it on demand, or configure it to run automatically when you save the buffer. The output appears in a hot-linked compiler buffer. The code and installation instructions can be found in the extras directory inside this distribution.

VIM

Scott Peshak has published perlchecker.vim, which is available at http://www.vim.org/scripts/script.php?script_id=1731.

gVIM

Fritz Mehner recently added support for perlmogrify to his fantastic gVIM plugin. In addition to providing a very Perlish IDE, Fritz's plugin enables one-click access to perlmogrify and many other very useful utilities. And all is seamlessly integrated into the editor. See "/lug.fh-swf.de/vim /vim-perl/screenshots-en.html" in http: for complete details.

EPIC

EPIC is an open source Perl IDE based on the Eclipse platform. Features include syntax highlighting, on-the-fly syntax check, content assist, code completion, perldoc support, source formatting with Perl::Tidy, code templates, a regular expression editing tool, and integration with the Perl debugger. Recent versions of EPIC also have built-in support for Perl::ToPerl6. At least one Perl::ToPerl6 contributor swears by EPIC. Go to http://e-p-i-c.sourceforge.net for more information about EPIC.

BBEdit

Josh Clark has produced an excellent Perl-ToPerl6 plugin for BBEdit. See http://globalmoxie.com/projects/bbedit-perl-mogrify/index.shtml for download, installation, and usage instructions. Apple users rejoice!

EXIT STATUS

If perlmogrify has any errors itself, exits with status == 1. If there are no errors, but perlmogrify finds Transformer transformations in your source code, exits with status == 2. If there were no errors and no transformations were found, exits with status == 0.

THE Perl::ToPerl6 PHILOSOPHY

Coding standards are deeply personal and highly subjective. The goal of Perl::ToPerl6 is to help you write code that conforms with a set of best practices. Our primary goal is not to dictate what those practices are, but rather, to implement the practices discovered by others. Ultimately, you make the rules -- Perl::ToPerl6 is merely a tool for encouraging consistency. If there is a policy that you think is important or that we have overlooked, we would be very grateful for contributions, or you can simply load your own private set of transformers into Perl::ToPerl6.

EXTENDING THE MOGRIFIER

The modular design of Perl::ToPerl6 is intended to facilitate the addition of new Policies. You'll need to have some understanding of PPI, but most Transformer modules are pretty straightforward and only require about 20 lines of code. Please see the Perl::ToPerl6::DEVELOPER file included in this distribution for a step-by-step demonstration of how to create new Transformer modules.

If you develop any new Transformer modules, feel free to send them to <team@perlmogrify.com> and I'll be happy to consider adding them into the Perl::ToPerl6 distribution. Or if you would like to work on the Perl::ToPerl6 project directly, you can fork our repository at "/github.com/Perl- ToPerl6/Perl- ToPerl6.git" in http:.

The Perl::ToPerl6 team is also available for hire. If your organization has its own coding standards, we can create custom Policies to enforce your local guidelines. Or if your code base is prone to a particular defect pattern, we can design Policies that will help you catch those costly defects before they go into production. To discuss your needs with the Perl::ToPerl6 team, just contact <team@perlmogrify.com>.

CONTACTING THE DEVELOPMENT TEAM

You are encouraged to subscribe to the mailing list; send a message to mailto:users-subscribe@perlmogrify.tigris.org. To prevent spam, you may be required to register for a user account with Tigris.org before being allowed to post messages to the mailing list. See also the mailing list archives at http://perlmogrify.tigris.org/servlets/SummarizeList?listName=users. At least one member of the development team is usually hanging around in irc://irc.perl.org/#perlmogrify and you can follow Perl::ToPerl6 on Twitter, at https://twitter.com/perlmogrify.

BUGS

Scrutinizing Perl code is hard for humans, let alone machines. If you find any bugs, particularly false-positives or false-negatives from a Perl::ToPerl6::Transformer, please submit them at "/github.com/Perl-ToPerl6 /Perl-ToPerl6/issues" in https:. Thanks.

CREDITS

Adam Kennedy - For creating PPI, the heart and soul of Perl::ToPerl6.

Damian Conway - For writing Perl Best Practices, finally :)

Chris Dolan - For contributing the best features and Transformer modules.

Andy Lester - Wise sage and master of all-things-testing.

Elliot Shank - The self-proclaimed quality freak.

Giuseppe Maxia - For all the great ideas and positive encouragement.

and Sharon, my wife - For putting up with my all-night code sessions.

Thanks also to the Perl Foundation for providing a grant to support Chris Dolan's project to implement twenty PBP transformers. http://www.perlfoundation.org/april_1_2007_new_grant_awards

AUTHOR

Jeffrey Ryan Thalhammer <jeff@imaginative-software.com>

COPYRIGHT

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of this license can be found in the LICENSE file included with this module.

To install Perl::ToPerl6, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Perl::ToPerl6

CPAN shell

perl -MCPAN -e shell
install Perl::ToPerl6

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)