/ 
Badger-0.14
River stage one • 4 direct dependents • 7 total dependents
/ Badger::Hub

NAME

Badger::Hub - central repository of shared resources

SYNOPSIS

use Badger::Hub;

# do the happy badger dance!

INTRODUCTION

This documentation describes the Badger::Hub object. A hub sits in the middle of a Badger application, providing a central point of access to the various other modules, components and sub-system that an application uses.

You generally don't need to worry about the Badger::Hub if you're just a casual user of the Badger modules. It will primarily be of interest to developers who are building their own badger-powered applications or extensions.

At present this module is quite basic. It will be developed further in due course.

DESCRIPTION

A Badger::Hub object is a central repository of shared resources for a Badger application. The hub sits in the middle of an application and provides access to all the individual components and larger sub-systems that may be required. It automatically loads and instantiates these other modules on demand and caches then for subsequent use.

Components

The Badger::Hub base class currently has two components:

filesystem  =>  Badger::Filesystem
codecs      =>  Badger::Codecs

An AUTOLOAD method allows you to access any component by name. It will be loaded and instantiated automatically. The AUTOLOAD method also generates the missing method so that you can avoid the overhead of the AUTOLOAD method the next time you call it.

my $filesystem = $hub->filesystem;

You can add your own component to a hub and they will be available in the same way.

$hub->components( fuzzbox => 'My::Module::Fuzzbox' );
my $fuzzbox = $hub->fuzzbox;

Delegates

As well as accessing components directly, you can also make use of delegate methods that get forwarded onto a component. For example, the hub file() method is just a short cut to the file() method of the filesystem component (implemented by Badger::Filesystem).

$file = $hub->file('/path/to/file');                # the short cut
$file = $hub->filesystem->file('/path/to/file');    # the long way

You can easily define your own delegate methods.

$hub->delegates( warm_fuzz => 'fuzzbox' );
$fuzzed = $hub->warm_fuzz;                          # the short way
$fuzzed = $hub->fuzzbox->warm_fuzz;                 # the long way.

Subclassing Badger::Hub

You can subclass Badger::Hub to define your own collection of components and delegate methods, as shown in the example below.

package My::Hub;

use Badger::Class
    version   => 0.01,
    debug     => 0,
    base      => 'Badger::Hub';

our $COMPONENTS = {
    fuzzbox => 'My::Module::Fuzzbox',
    flanger => 'My::Module::Flanger',
};

our $DELEGATES  = { 
    warm_fuzz   => 'fuzzbox',
    dirty_noise => 'fuzzbox',
    wide_flange => 'flanger',
    wet_flange  => 'flanger',
};

Circular References are a Good Thing

In some cases, sub-systems instantiated by a Badger::Hub will also maintain a reference back to the hub. This allows them to access other sub-systems and components that they require.

Note that this behaviour implicitly creates circular references between the hub and its delegates. This is intentional. It ensures that the hub and delegates keep each other alive until the hub is explicitly destroyed and the references are freed. Having the hub stick around for as long as possible is usually a Good Thing. It acts as a singleton providing a central point of access to the resources that your application uses (which is a fancy way of saying it's like a global variable).

+-----+      +-----------+
| HUB |----->| COMPONENT |
|     |<-----|           |
+-----+      +-----------+

If you manually create a hub for whatever reason (and the cases where you would need to are few and far between) then you are responsible for calling the destroy() method when you're done with it. This will manually break the circular references and free up any memory used by the hub and any delegates it is using. If you don't call the destroy() method then the hub will remain alive until the end of the program when the memory will be freed as usual. In most cases this is perfectly acceptable.

However, you generally don't need to worry about any of this because you wouldn't normally create a hub manually. Instead, you would leave it up to the Badger façade (or "front-end") module to do that behind the scenes. When you create a Badger module it implicitly creates a Badger::Hub to use. When the Badger object goes out of scope its DESTROY method automatically calls the hub's destroy method.

sub foo {
    my $badger = Badger->new;
    my $hub    = $badger->hub;
    # do something
    
    # $badger object is freed here, that calls $hub->destroy
}

Because there is no reference from the hub back to the Badger façade object you don't have to worry about circular references. The Badger object is correctly freed and that ensures the hub gets cleaned up.

+--------+      +-----+      +-----------+
| BADGER |----->| HUB |----->| COMPONENT |
|        |      |     |<-----|           |
+--------+      +-----+      +-----------+

If you call Badger methods as class methods then they are forwarded to a prototype object (effectively a singleton object). That in turn will use a prototype hub object. In this case, both the Badger and Badger::Hub objects will exist until the end of the program. This ensures that your class methods all Do the right Thing without you having to worry about creating a Badger object.

# class method creates Badger prototype, which creates Badger::Hub
# prototype, which loads, instantiates and caches Badger::Filesystem 
# which can then fetch the file
my $file = Badger->file('/path/to/file');

# later... reuse same Badger, Badger::Hub and Badger::Filesystem
my $dir = Badger->dir('/path/to/dir');

METHODS

new()

Constructor method used to create a new hub object.

$hub = Badger::Hub->new();

components()

This method can be used to get or set entries in the components table for the hub. Components are other modules that the hub can delegate to.

# get components hash ref
my $comps = $hub->components;

# add new components
$hub->components({
    fuzzbox => 'My::Module::Fuzzbox',
    flanger => 'My::Module::Flanger',
});

component($name)

This method returns a single entry from the components table.

print $hub->component('fuzzbox');   # My::Module::Fuzzbox

delegates()

This method can be used to get or set entries in the delegates table for the hub. This specifies which hub methods should be delegated to components.

# get delegates hash ref
my $delegs = $hub->delegates;

# add new delegates
$hub->delegates({
    warm_fuzz   => 'fuzzbox',
    dirty_noise => 'fuzzbox',
    wide_flange => 'flanger',
    wet_flange  => 'flanger',
});

delegate($name)

This method returns a single entry from the delegates table.

print $hub->delegate('warm_fuzz');  # fuzzbox

destroy()

This method can be manually called to destroy the hub and any components that it is using.

INTERNAL METHODS

construct($component,\%params)

This method configures and instantiates a component. The first argument is the component name. This is mapped to a module via the component() method and the module is loaded. A list of named parameters, or a reference to a hash array of named paramters may follow. A reference to the hub is added to these as the hub item before forwarding them to the constructor method for the component. The component is then cached for subsequent use.

# calling the construct() method like this...
$hub->construct( fuzzbox => { volume => 11 } );

# ...results in code equivalent to this:
use Your::Module::Fuzzbox;
Your::Module::Fuzzbox->new({ volume => 11, hub => $hub });

auto_can($name)

This method is installed as an auto_can handler which is called to resolved undefined methods. If the method called matches the name of a component then it calls auto_component() to generate a method to access the component. If it matches the name of a delegate method then it calls auto_delegate() to generate a delegate method.

auto_component($name,$module)

This method generates a component method named $name which accesses an instance of the $module component module.

auto_delegate($name,$component)

This method generates a delegate method named $name which delegates to the $name method of the $component component.

config()

This method returns a reference to a Badger::Config object representing the configuration for the hub. This is still marked experimental.

AUTHOR

Andy Wardley http://wardley.org/

COPYRIGHT

Copyright (C) 2001-2009 Andy Wardley. All Rights Reserved.

This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.