NAME
Sim::OPT::Takechance.
SYNOPSIS
use Sim::OPT::Takechance;
takechance your_configuration_file.pl;DESCRIPTION
The "Sim::OPT::Takechance" module can produce efficient search structures for block coordinate descent given some initialization blocks (subspaces). Its strategy is based on measuring the efficiency of alternative search paths to pick the most efficient one. This is done by seeking for the search moves warranting that (1) the search wake is fresher than that of the average random ones and (2) the search moves are more novel than the average random ones. The rationale for the selection of the seach paths is explained in detail (with algorithms) in the paper at the following web address: http://dx.doi.org/10.1016/j.autcon.2016.08.014.
"Sim::OPT::Takechance" can be called from "Sim::OPT" or directly from the command line (after issuing < re.pl > and < use Sim::OPT::Takechance >) with the command < takechance your_configuration_file.pl >.
The variables to be taken into account to describe the initialization blocks of a search in the configuration file are "@chanceseed" (representing the sequence of design variables at each search step) and "@caseseed" (representing the sequence of decompositions to be taken into account). (In place of the "@chaceseed" and "@caseseed" variables, a "@sweepseed" variable can be specified, written with the same criteria of the variable "@sweeps" described in the documentation of the "Sim::OPT" module; but this possibility has not been throughly tested yet.)
How "@chanceseed" and "@caseseed" should be specified is more quickly described with a couple of examples.
1) If brute force optimization is sought for a case composed by 4 parameters, the following settings should be specified: <@chanceseed = ([1, 2, 3, 4]);> and <@caseseed = ( [ [0, 4] ] ) ;>.
2) If optimization is sought for two cases (brute force, again, for instance, with a different and overlapping set of 5 parameters for the two of them), the two sets of parameters in questions has to be specificied as sublists of the general parameter list: <@chanceseed = ([1, 2, 3, 4, 6, 7, 8], [1, 2, 3, 4, 6, 7, 8]);> and <@caseseed = ( [ [0, 5] , [3, 8] ] ) ;>.
3) If a block search is sought on the basis of 5 parameters, with 4 overlapping active blocks composed by 3 parameters each having the leftmost parameters in position 0, 1, 2 and 4, and two search sweeps are to be performed, with the second sweep having the parameters in inverted order and the leftmost parameters in position 2, 4, 3 and 1, the following settings should be specified: <@chanceseed = ( [ [1, 2, 3, 4, 5], [1, 2, 3, 4, 5], [1, 2, 3, 4, 5], [1, 2, 3, 4, 5], [5, 4, 3, 2, 1], [5, 4, 3, 2, 1], [5, 4, 3, 2, 1], [5, 4, 3, 2, 1]] );> and <@caseseed = ( [ [0, 3], [1, 3], [2, 3], [4, 3] ], [2, 3], [4, 3], [3, 3], [1, 3] ] );>.
4) By playing with the order of the parameters' sequence, blocks with non-contiguous parameters can be specified. Example: <@chanceseed = ( [ [1, 2, 3, 4, 5], [1, 2, 3, 4, 5], [1, 2, 3, 4, 5], [1, 2, 3, 4, 5], [5, 2, 4, 1, 3], [2, 4, 1, 5, 2], [5, 1, 4, 2, 3], [5, 1, 4, 2, 3] ] );> and <@caseseed = ( [ [0, 3], [1, 3], [2, 3], [4, 3] ], [2, 3], [4, 3], [3, 3], [1, 3] ] );>.
5) The initialization blocks can be of different size. Example: <@chanceseed = ( [ [1, 2, 3, 4, 5], [1, 2, 3, 4, 5], [1, 2, 3, 4, 5], [1, 2, 3, 4, 5], [5, 2, 4, 1, 3], [2, 4, 1, 5, 2], [5, 1, 4, 2, 3], [5, 1, 4, 2, 3] ] );> and <@caseseed = ( [ [0, 3], [1, 3], [2, 3], [4, 3] ], [2, 2], [4, 2], [3, 4], [1, 4] ] );>.
Other variables which are necessary to define in the configuration file for describing the operations to be performed by the "Sim::OPT::Takechance" module are "@chancedata", "$dimchance", "@pars_tocheck" and "@varnumbers".
"@chancedata" is composed by references to arrays (one for each search path to be taken into account, as in all the other cases), each of which composed by three values: the first specifying the length (how many variables) of the blocks to be added; the second specifying the length of the overlap between blocks; the third specifying the number of sweeps (subsearches, searches in subspaces) to be added. For example, the setting < @chancedata = ([4, 3, 2]); > implies that the blocks to be added to the search path are each 4 parameters long, have each an overlap of 3 parameters with the immediately preceding block, and are 2 in number - that is, 2 sweeps have to be added to the search path.
"$dimchance" tells the program among how many random samples the blocks to be added to the search path have to be chosen. The higher the value, the most efficient the search structure will turn out to be, the higher the required computation time will be. High values are likely to be required by large search structures.
"@varnumbers" is shared with the Sim::OPT module. It specifies the number of iterations to be taken into account for each parameter and each search case. For example, to specifiy that the parameters of a search structure involving 5 parameters (numbered from 1 to 5) for one case are to be tried for 3 values (iterations) each, "@varnumbers" has to be set to "( { 1 => 3, 2 => 3, 3 => 3, 4 => 3, 5 => 3 } )".
"@pars_tocheck" is a variable in which the parameter numbers to be taken into account in the creation of the added search path have to be listed. If it is not defined, all the available parameters will be used.
The response produced by the "Sim::OPT::Takechance" module will be written in a long-name file in the work folder: "./search_structure_that_may_be_adopted.txt".
EXPORT
"takechance".
SEE ALSO
An example of configuration instructions for Sim::OPT::Takechance is included in the comments in the "esp.pl" file, which is packed in "optw.tar.gz" file in "examples" directory in this distribution. But mostly, reference to the source code should be made.
AUTHOR
Gian Luca Brunetti, <gianluca.brunetti@polimi.it>
COPYRIGHT AND LICENSE
Copyright (C) 2014-2015 by Gian Luca Brunetti and Politecnico di Milano. This is free software. You can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3.