NAME

Paws::GlobalAccelerator - Perl Interface to AWS AWS Global Accelerator

SYNOPSIS

use Paws;

my $obj = Paws->service('GlobalAccelerator');
my $res = $obj->Method(
  Arg1 => $val1,
  Arg2 => [ 'V1', 'V2' ],
  # if Arg3 is an object, the HashRef will be used as arguments to the constructor
  # of the arguments type
  Arg3 => { Att1 => 'Val1' },
  # if Arg4 is an array of objects, the HashRefs will be passed as arguments to
  # the constructor of the arguments type
  Arg4 => [ { Att1 => 'Val1'  }, { Att1 => 'Val2' } ],
);

DESCRIPTION

AWS Global Accelerator

This is the AWS Global Accelerator API Reference. This guide is for developers who need detailed information about AWS Global Accelerator API actions, data types, and errors. For more information about Global Accelerator features, see the AWS Global Accelerator Developer Guide (https://docs.aws.amazon.com/global-accelerator/latest/dg/Welcome.html).

AWS Global Accelerator is a service in which you create accelerators to improve the performance of your applications for local and global users. Depending on the type of accelerator you choose, you can gain additional benefits.

By using a standard accelerator, you can improve availability of your internet applications that are used by a global audience. With a standard accelerator, Global Accelerator directs traffic to optimal endpoints over the AWS global network.
For other scenarios, you might choose a custom routing accelerator. With a custom routing accelerator, you can use application logic to directly map one or more users to a specific endpoint among many endpoints.

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

By default, Global Accelerator provides you with two static IP addresses that you associate with your accelerator. With a standard accelerator, instead of using the IP addresses that Global Accelerator provides, you can configure these entry points to be IPv4 addresses from your own IP address ranges that you bring to Global Accelerator. The static IP addresses are anycast from the AWS edge network. For a standard accelerator, they distribute incoming application traffic across multiple endpoint resources in multiple AWS Regions, which increases the availability of your applications. Endpoints for standard accelerators can be Network Load Balancers, Application Load Balancers, Amazon EC2 instances, or Elastic IP addresses that are located in one AWS Region or multiple Regions. For custom routing accelerators, you map traffic that arrives to the static IP addresses to specific Amazon EC2 servers in endpoints that are virtual private cloud (VPC) subnets.

The static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them. You can use IAM policies like tag-based permissions with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Tag-based policies (https://docs.aws.amazon.com/global-accelerator/latest/dg/access-control-manage-access-tag-policies.html).

For standard accelerators, Global Accelerator uses the AWS global network to route traffic to the optimal regional endpoint based on health, client location, and policies that you configure. The service reacts instantly to changes in health or configuration to ensure that internet traffic from clients is always directed to healthy endpoints.

For a list of the AWS Regions where Global Accelerator and other services are currently supported, see the AWS Region Table (https://docs.aws.amazon.com/about-aws/global-infrastructure/regional-product-services/).

AWS Global Accelerator includes the following components:

Static IP addresses

Global Accelerator provides you with a set of two static IP addresses that are anycast from the AWS edge network. If you bring your own IP address range to AWS (BYOIP) to use with a standard accelerator, you can instead assign IP addresses from your own pool to use with your accelerator. For more information, see Bring your own IP addresses (BYOIP) in AWS Global Accelerator (https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html).

The IP addresses serve as single fixed entry points for your clients. If you already have Elastic Load Balancing load balancers, Amazon EC2 instances, or Elastic IP address resources set up for your applications, you can easily add those to a standard accelerator in Global Accelerator. This allows Global Accelerator to use static IP addresses to access the resources.

The static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them. You can use IAM policies like tag-based permissions with Global Accelerator to delete an accelerator. For more information, see Tag-based policies (https://docs.aws.amazon.com/global-accelerator/latest/dg/access-control-manage-access-tag-policies.html).

Accelerator

An accelerator directs traffic to endpoints over the AWS global network to improve the performance of your internet applications. Each accelerator includes one or more listeners.

There are two types of accelerators:

A standard accelerator directs traffic to the optimal AWS endpoint based on several factors, including the user’s location, the health of the endpoint, and the endpoint weights that you configure. This improves the availability and performance of your applications. Endpoints can be Network Load Balancers, Application Load Balancers, Amazon EC2 instances, or Elastic IP addresses.
A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instances running in a single or multiple virtual private clouds (VPCs). With custom routing, listener ports are mapped to statically associate port ranges with VPC subnets, which allows Global Accelerator to determine an EC2 instance IP address at the time of connection. By default, all port mapping destinations in a VPC subnet can't receive traffic. You can choose to configure all destinations in the subnet to receive traffic, or to specify individual port mappings that can receive traffic.

For more information, see Types of accelerators (https://docs.aws.amazon.com/global-accelerator/latest/dg/introduction-accelerator-types.html).

DNS name

Global Accelerator assigns each accelerator a default Domain Name System (DNS) name, similar to a1234567890abcdef.awsglobalaccelerator.com, that points to the static IP addresses that Global Accelerator assigns to you or that you choose from your own IP address range. Depending on the use case, you can use your accelerator's static IP addresses or DNS name to route traffic to your accelerator, or set up DNS records to route traffic using your own custom domain name.

Network zone

A network zone services the static IP addresses for your accelerator from a unique IP subnet. Similar to an AWS Availability Zone, a network zone is an isolated unit with its own set of physical infrastructure. When you configure an accelerator, by default, Global Accelerator allocates two IPv4 addresses for it. If one IP address from a network zone becomes unavailable due to IP address blocking by certain client networks, or network disruptions, then client applications can retry on the healthy static IP address from the other isolated network zone.

Listener

A listener processes inbound connections from clients to Global Accelerator, based on the port (or port range) and protocol (or protocols) that you configure. A listener can be configured for TCP, UDP, or both TCP and UDP protocols. Each listener has one or more endpoint groups associated with it, and traffic is forwarded to endpoints in one of the groups. You associate endpoint groups with listeners by specifying the Regions that you want to distribute traffic to. With a standard accelerator, traffic is distributed to optimal endpoints within the endpoint groups associated with a listener.

Endpoint group

Each endpoint group is associated with a specific AWS Region. Endpoint groups include one or more endpoints in the Region. With a standard accelerator, you can increase or reduce the percentage of traffic that would be otherwise directed to an endpoint group by adjusting a setting called a traffic dial. The traffic dial lets you easily do performance testing or blue/green deployment testing, for example, for new releases across different AWS Regions.

Endpoint

An endpoint is a resource that Global Accelerator directs traffic to.

Endpoints for standard accelerators can be Network Load Balancers, Application Load Balancers, Amazon EC2 instances, or Elastic IP addresses. An Application Load Balancer endpoint can be internet-facing or internal. Traffic for standard accelerators is routed to endpoints based on the health of the endpoint along with configuration options that you choose, such as endpoint weights. For each endpoint, you can configure weights, which are numbers that you can use to specify the proportion of traffic to route to each one. This can be useful, for example, to do performance testing within a Region.

Endpoints for custom routing accelerators are virtual private cloud (VPC) subnets with one or many EC2 instances.

For the AWS API documentation, see https://docs.aws.amazon.com/goto/WebAPI/globalaccelerator-2018-08-08

METHODS

AddCustomRoutingEndpoints

EndpointConfigurations => ArrayRef[Paws::GlobalAccelerator::CustomRoutingEndpointConfiguration]
EndpointGroupArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::AddCustomRoutingEndpoints

Returns: a Paws::GlobalAccelerator::AddCustomRoutingEndpointsResponse instance

Associate a virtual private cloud (VPC) subnet endpoint with your custom routing accelerator.

The listener port range must be large enough to support the number of IP addresses that can be specified in your subnet. The number of ports required is: subnet size times the number of ports per destination EC2 instances. For example, a subnet defined as /24 requires a listener port range of at least 255 ports.

Note: You must have enough remaining listener ports available to map to the subnet ports, or the call will fail with a LimitExceededException.

By default, all destinations in a subnet in a custom routing accelerator cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic (https://docs.aws.amazon.com/global-accelerator/latest/api/API_AllowCustomRoutingTraffic.html) operation.

AdvertiseByoipCidr

Cidr => Str

Each argument is described in detail in: Paws::GlobalAccelerator::AdvertiseByoipCidr

Returns: a Paws::GlobalAccelerator::AdvertiseByoipCidrResponse instance

Advertises an IPv4 address range that is provisioned for use with your AWS resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to AWS because of propagation delays.

To stop advertising the BYOIP address range, use WithdrawByoipCidr (https://docs.aws.amazon.com/global-accelerator/latest/api/WithdrawByoipCidr.html).

For more information, see Bring Your Own IP Addresses (BYOIP) (https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html) in the AWS Global Accelerator Developer Guide.

AllowCustomRoutingTraffic

EndpointGroupArn => Str
EndpointId => Str
[AllowAllTrafficToEndpoint => Bool]
[DestinationAddresses => ArrayRef[Str|Undef]]
[DestinationPorts => ArrayRef[Int]]

Each argument is described in detail in: Paws::GlobalAccelerator::AllowCustomRoutingTraffic

Returns: nothing

Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that can receive traffic for a custom routing accelerator. You can allow traffic to all destinations in the subnet endpoint, or allow traffic to a specified list of destination IP addresses and ports in the subnet. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

CreateAccelerator

IdempotencyToken => Str
Name => Str
[Enabled => Bool]
[IpAddresses => ArrayRef[Str|Undef]]
[IpAddressType => Str]
[Tags => ArrayRef[Paws::GlobalAccelerator::Tag]]

Each argument is described in detail in: Paws::GlobalAccelerator::CreateAccelerator

Returns: a Paws::GlobalAccelerator::CreateAcceleratorResponse instance

Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

CreateCustomRoutingAccelerator

IdempotencyToken => Str
Name => Str
[Enabled => Bool]
[IpAddresses => ArrayRef[Str|Undef]]
[IpAddressType => Str]
[Tags => ArrayRef[Paws::GlobalAccelerator::Tag]]

Each argument is described in detail in: Paws::GlobalAccelerator::CreateCustomRoutingAccelerator

Returns: a Paws::GlobalAccelerator::CreateCustomRoutingAcceleratorResponse instance

Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints.

Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic (https://docs.aws.amazon.com/global-accelerator/latest/api/API_AllowCustomRoutingTraffic.html) operation.

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

CreateCustomRoutingEndpointGroup

DestinationConfigurations => ArrayRef[Paws::GlobalAccelerator::CustomRoutingDestinationConfiguration]
EndpointGroupRegion => Str
IdempotencyToken => Str
ListenerArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::CreateCustomRoutingEndpointGroup

Returns: a Paws::GlobalAccelerator::CreateCustomRoutingEndpointGroupResponse instance

Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one AWS Region.

CreateCustomRoutingListener

AcceleratorArn => Str
IdempotencyToken => Str
PortRanges => ArrayRef[Paws::GlobalAccelerator::PortRange]

Each argument is described in detail in: Paws::GlobalAccelerator::CreateCustomRoutingListener

Returns: a Paws::GlobalAccelerator::CreateCustomRoutingListenerResponse instance

Create a listener to process inbound connections from clients to a custom routing accelerator. Connections arrive to assigned static IP addresses on the port range that you specify.

CreateEndpointGroup

EndpointGroupRegion => Str
IdempotencyToken => Str
ListenerArn => Str
[EndpointConfigurations => ArrayRef[Paws::GlobalAccelerator::EndpointConfiguration]]
[HealthCheckIntervalSeconds => Int]
[HealthCheckPath => Str]
[HealthCheckPort => Int]
[HealthCheckProtocol => Str]
[PortOverrides => ArrayRef[Paws::GlobalAccelerator::PortOverride]]
[ThresholdCount => Int]
[TrafficDialPercentage => Num]

Each argument is described in detail in: Paws::GlobalAccelerator::CreateEndpointGroup

Returns: a Paws::GlobalAccelerator::CreateEndpointGroupResponse instance

Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. A resource must be valid and active when you add it as an endpoint.

CreateListener

AcceleratorArn => Str
IdempotencyToken => Str
PortRanges => ArrayRef[Paws::GlobalAccelerator::PortRange]
Protocol => Str
[ClientAffinity => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::CreateListener

Returns: a Paws::GlobalAccelerator::CreateListenerResponse instance

Create a listener to process inbound connections from clients to an accelerator. Connections arrive to assigned static IP addresses on a port, port range, or list of port ranges that you specify.

DeleteAccelerator

AcceleratorArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DeleteAccelerator

Returns: nothing

Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.

The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control (https://docs.aws.amazon.com/global-accelerator/latest/dg/auth-and-access-control.html) in the AWS Global Accelerator Developer Guide.

DeleteCustomRoutingAccelerator

AcceleratorArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DeleteCustomRoutingAccelerator

Returns: nothing

Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.

DeleteCustomRoutingEndpointGroup

EndpointGroupArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DeleteCustomRoutingEndpointGroup

Returns: nothing

Delete an endpoint group from a listener for a custom routing accelerator.

DeleteCustomRoutingListener

ListenerArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DeleteCustomRoutingListener

Returns: nothing

Delete a listener for a custom routing accelerator.

DeleteEndpointGroup

EndpointGroupArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DeleteEndpointGroup

Returns: nothing

Delete an endpoint group from a listener.

DeleteListener

ListenerArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DeleteListener

Returns: nothing

Delete a listener from an accelerator.

DenyCustomRoutingTraffic

EndpointGroupArn => Str
EndpointId => Str
[DenyAllTrafficToEndpoint => Bool]
[DestinationAddresses => ArrayRef[Str|Undef]]
[DestinationPorts => ArrayRef[Int]]

Each argument is described in detail in: Paws::GlobalAccelerator::DenyCustomRoutingTraffic

Returns: nothing

Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that cannot receive traffic for a custom routing accelerator. You can deny traffic to all destinations in the VPC endpoint, or deny traffic to a specified list of destination IP addresses and ports. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

DeprovisionByoipCidr

Cidr => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DeprovisionByoipCidr

Returns: a Paws::GlobalAccelerator::DeprovisionByoipCidrResponse instance

Releases the specified address range that you provisioned to use with your AWS resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.

Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr (https://docs.aws.amazon.com/global-accelerator/latest/api/WithdrawByoipCidr.html) and you must not have any accelerators that are using static IP addresses allocated from its address range.

For more information, see Bring Your Own IP Addresses (BYOIP) (https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html) in the AWS Global Accelerator Developer Guide.

DescribeAccelerator

AcceleratorArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DescribeAccelerator

Returns: a Paws::GlobalAccelerator::DescribeAcceleratorResponse instance

Describe an accelerator.

DescribeAcceleratorAttributes

AcceleratorArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DescribeAcceleratorAttributes

Returns: a Paws::GlobalAccelerator::DescribeAcceleratorAttributesResponse instance

Describe the attributes of an accelerator.

DescribeCustomRoutingAccelerator

AcceleratorArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DescribeCustomRoutingAccelerator

Returns: a Paws::GlobalAccelerator::DescribeCustomRoutingAcceleratorResponse instance

Describe a custom routing accelerator.

DescribeCustomRoutingAcceleratorAttributes

AcceleratorArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DescribeCustomRoutingAcceleratorAttributes

Returns: a Paws::GlobalAccelerator::DescribeCustomRoutingAcceleratorAttributesResponse instance

Describe the attributes of a custom routing accelerator.

DescribeCustomRoutingEndpointGroup

EndpointGroupArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DescribeCustomRoutingEndpointGroup

Returns: a Paws::GlobalAccelerator::DescribeCustomRoutingEndpointGroupResponse instance

Describe an endpoint group for a custom routing accelerator.

DescribeCustomRoutingListener

ListenerArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DescribeCustomRoutingListener

Returns: a Paws::GlobalAccelerator::DescribeCustomRoutingListenerResponse instance

The description of a listener for a custom routing accelerator.

DescribeEndpointGroup

EndpointGroupArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DescribeEndpointGroup

Returns: a Paws::GlobalAccelerator::DescribeEndpointGroupResponse instance

Describe an endpoint group.

DescribeListener

ListenerArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::DescribeListener

Returns: a Paws::GlobalAccelerator::DescribeListenerResponse instance

Describe a listener.

ListAccelerators

[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::ListAccelerators

Returns: a Paws::GlobalAccelerator::ListAcceleratorsResponse instance

List the accelerators for an AWS account.

ListByoipCidrs

[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::ListByoipCidrs

Returns: a Paws::GlobalAccelerator::ListByoipCidrsResponse instance

Lists the IP address ranges that were specified in calls to ProvisionByoipCidr (https://docs.aws.amazon.com/global-accelerator/latest/api/ProvisionByoipCidr.html), including the current state and a history of state changes.

ListCustomRoutingAccelerators

[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::ListCustomRoutingAccelerators

Returns: a Paws::GlobalAccelerator::ListCustomRoutingAcceleratorsResponse instance

List the custom routing accelerators for an AWS account.

ListCustomRoutingEndpointGroups

ListenerArn => Str
[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::ListCustomRoutingEndpointGroups

Returns: a Paws::GlobalAccelerator::ListCustomRoutingEndpointGroupsResponse instance

List the endpoint groups that are associated with a listener for a custom routing accelerator.

ListCustomRoutingListeners

AcceleratorArn => Str
[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::ListCustomRoutingListeners

Returns: a Paws::GlobalAccelerator::ListCustomRoutingListenersResponse instance

List the listeners for a custom routing accelerator.

ListCustomRoutingPortMappings

AcceleratorArn => Str
[EndpointGroupArn => Str]
[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::ListCustomRoutingPortMappings

Returns: a Paws::GlobalAccelerator::ListCustomRoutingPortMappingsResponse instance

Provides a complete mapping from the public accelerator IP address and port to destination EC2 instance IP addresses and ports in the virtual public cloud (VPC) subnet endpoint for a custom routing accelerator. For each subnet endpoint that you add, Global Accelerator creates a new static port mapping for the accelerator. The port mappings don't change after Global Accelerator generates them, so you can retrieve and cache the full mapping on your servers.

If you remove a subnet from your accelerator, Global Accelerator removes (reclaims) the port mappings. If you add a subnet to your accelerator, Global Accelerator creates new port mappings (the existing ones don't change). If you add or remove EC2 instances in your subnet, the port mappings don't change, because the mappings are created when you add the subnet to Global Accelerator.

The mappings also include a flag for each destination denoting which destination IP addresses and ports are allowed or denied traffic.

ListCustomRoutingPortMappingsByDestination

DestinationAddress => Str
EndpointId => Str
[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::ListCustomRoutingPortMappingsByDestination

Returns: a Paws::GlobalAccelerator::ListCustomRoutingPortMappingsByDestinationResponse instance

List the port mappings for a specific EC2 instance (destination) in a VPC subnet endpoint. The response is the mappings for one destination IP address. This is useful when your subnet endpoint has mappings that span multiple custom routing accelerators in your account, or for scenarios where you only want to list the port mappings for a specific destination instance.

ListEndpointGroups

ListenerArn => Str
[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::ListEndpointGroups

Returns: a Paws::GlobalAccelerator::ListEndpointGroupsResponse instance

List the endpoint groups that are associated with a listener.

ListListeners

AcceleratorArn => Str
[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::ListListeners

Returns: a Paws::GlobalAccelerator::ListListenersResponse instance

List the listeners for an accelerator.

ListTagsForResource

ResourceArn => Str

Each argument is described in detail in: Paws::GlobalAccelerator::ListTagsForResource

Returns: a Paws::GlobalAccelerator::ListTagsForResourceResponse instance

List all tags for an accelerator.

For more information, see Tagging in AWS Global Accelerator (https://docs.aws.amazon.com/global-accelerator/latest/dg/tagging-in-global-accelerator.html) in the AWS Global Accelerator Developer Guide.

ProvisionByoipCidr

Cidr => Str
CidrAuthorizationContext => Paws::GlobalAccelerator::CidrAuthorizationContext

Each argument is described in detail in: Paws::GlobalAccelerator::ProvisionByoipCidr

Returns: a Paws::GlobalAccelerator::ProvisionByoipCidrResponse instance

Provisions an IP address range to use with your AWS resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using AdvertiseByoipCidr (https://docs.aws.amazon.com/global-accelerator/latest/api/AdvertiseByoipCidr.html).

For more information, see Bring Your Own IP Addresses (BYOIP) (https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html) in the AWS Global Accelerator Developer Guide.

RemoveCustomRoutingEndpoints

EndpointGroupArn => Str
EndpointIds => ArrayRef[Str|Undef]

Each argument is described in detail in: Paws::GlobalAccelerator::RemoveCustomRoutingEndpoints

Returns: nothing

Remove endpoints from a custom routing accelerator.

TagResource

ResourceArn => Str
Tags => ArrayRef[Paws::GlobalAccelerator::Tag]

Each argument is described in detail in: Paws::GlobalAccelerator::TagResource

Returns: a Paws::GlobalAccelerator::TagResourceResponse instance

Add tags to an accelerator resource.

UntagResource

ResourceArn => Str
TagKeys => ArrayRef[Str|Undef]

Each argument is described in detail in: Paws::GlobalAccelerator::UntagResource

Returns: a Paws::GlobalAccelerator::UntagResourceResponse instance

Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed.

UpdateAccelerator

AcceleratorArn => Str
[Enabled => Bool]
[IpAddressType => Str]
[Name => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::UpdateAccelerator

Returns: a Paws::GlobalAccelerator::UpdateAcceleratorResponse instance

Update an accelerator.

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

UpdateAcceleratorAttributes

AcceleratorArn => Str
[FlowLogsEnabled => Bool]
[FlowLogsS3Bucket => Str]
[FlowLogsS3Prefix => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::UpdateAcceleratorAttributes

Returns: a Paws::GlobalAccelerator::UpdateAcceleratorAttributesResponse instance

Update the attributes for an accelerator.

UpdateCustomRoutingAccelerator

AcceleratorArn => Str
[Enabled => Bool]
[IpAddressType => Str]
[Name => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::UpdateCustomRoutingAccelerator

Returns: a Paws::GlobalAccelerator::UpdateCustomRoutingAcceleratorResponse instance

Update a custom routing accelerator.

UpdateCustomRoutingAcceleratorAttributes

AcceleratorArn => Str
[FlowLogsEnabled => Bool]
[FlowLogsS3Bucket => Str]
[FlowLogsS3Prefix => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::UpdateCustomRoutingAcceleratorAttributes

Returns: a Paws::GlobalAccelerator::UpdateCustomRoutingAcceleratorAttributesResponse instance

Update the attributes for a custom routing accelerator.

UpdateCustomRoutingListener

ListenerArn => Str
PortRanges => ArrayRef[Paws::GlobalAccelerator::PortRange]

Each argument is described in detail in: Paws::GlobalAccelerator::UpdateCustomRoutingListener

Returns: a Paws::GlobalAccelerator::UpdateCustomRoutingListenerResponse instance

Update a listener for a custom routing accelerator.

UpdateEndpointGroup

EndpointGroupArn => Str
[EndpointConfigurations => ArrayRef[Paws::GlobalAccelerator::EndpointConfiguration]]
[HealthCheckIntervalSeconds => Int]
[HealthCheckPath => Str]
[HealthCheckPort => Int]
[HealthCheckProtocol => Str]
[PortOverrides => ArrayRef[Paws::GlobalAccelerator::PortOverride]]
[ThresholdCount => Int]
[TrafficDialPercentage => Num]

Each argument is described in detail in: Paws::GlobalAccelerator::UpdateEndpointGroup

Returns: a Paws::GlobalAccelerator::UpdateEndpointGroupResponse instance

Update an endpoint group. A resource must be valid and active when you add it as an endpoint.

UpdateListener

ListenerArn => Str
[ClientAffinity => Str]
[PortRanges => ArrayRef[Paws::GlobalAccelerator::PortRange]]
[Protocol => Str]

Each argument is described in detail in: Paws::GlobalAccelerator::UpdateListener

Returns: a Paws::GlobalAccelerator::UpdateListenerResponse instance

Update a listener.

WithdrawByoipCidr

Cidr => Str

Each argument is described in detail in: Paws::GlobalAccelerator::WithdrawByoipCidr

Returns: a Paws::GlobalAccelerator::WithdrawByoipCidrResponse instance

Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time.

It can take a few minutes before traffic to the specified addresses stops routing to AWS because of propagation delays.

For more information, see Bring Your Own IP Addresses (BYOIP) (https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html) in the AWS Global Accelerator Developer Guide.

PAGINATORS

Paginator methods are helpers that repetively call methods that return partial results