/ 
Net-Server-2.014
River stage two • 39 direct dependents • 90 total dependents
/ Net::Server::Multiplex

NAME

Net::Server::Multiplex - Multiplex several connections within one process

SYNOPSIS

package MyPlexer;

use base qw(Net::Server::Multiplex);

sub mux_input {
    #...code...
}

__PACKAGE__->run();

DESCRIPTION

This personality is designed to handle multiple connections all within one process. It should only be used with protocols that are guaranteed to be able to respond quickly on a packet by packet basis. If determining a response could take a while or an unknown period of time, all other connections established will block until the response completes. If this condition might ever occur, this personality should probably not be used.

This takes some nice features of Net::Server (like the server listen socket setup, configuration file processing, safe signal handling, convenient inet style STDIN/STDOUT handling, logging features, deamonization and pid tracking, and restartability -SIGHUP) and some nice features of IO::Multiplex (automatic buffered IO and per-file-handle objects) and combines them for an easy-to-use interface.

See examples/samplechat.pl distributed with Net::Server for a simple chat server that uses several of these features.

PROCESS FLOW

The process flow is written in an open, easy to override, easy to hook, fashion. The basic flow is shown below.

  $self->configure_hook;

  $self->configure(@_);

  $self->post_configure;

  $self->post_configure_hook;

  $self->pre_bind;

  $self->bind;

  if (Restarting server) {
      $self->restart_open_hook();
  }

  $self->post_bind_hook;

  $self->post_bind;

  $self->pre_loop_hook;

  $self->loop; # This basically just runs IO::Multiplex::loop
  # For routines inside a $self->loop
  # See CLIENT PROCESSING below

  $self->pre_server_close_hook;

  $self->post_child_cleanup_hook;

  $self->server_close;

  if (Restarting server) {
      $self->restart_close_hook();
      $self->hup_server;
      # Redo process again starting with configure_hook
}

The server then exits.

CLIENT PROCESSING

The following represents the client processing program flow:

$self->{server}->{client} = Net::Server::Proto::TCP->accept();  # NOTE: Multiplexed with mux_input() below

if (check_for_dequeue seconds have passed) {
    $self->run_dequeue();
}

$self->get_client_info;

$self->post_accept_hook; # Net::Server style

if ($self->allow_deny
    && $self->allow_deny_hook) {

  # (Net::Server style $self->process_request() is never called.)

  # A unique client specific object is created
  # for all mux_* methods from this point on.
  $self = __PACKAGE__->new($self, client);

  $self->mux_connection; # IO::Multiplex style

  for (every packet received) {
    $self->mux_input;  # NOTE: Multiplexed with accept() above
  }

} else {

  $self->request_denied_hook;

  # Notice that if either allow_deny or allow_deny_hook fails, then
  # new(), mux_connection(), and mux_input() will never be called.
  # mux_eof() and mux_close() will still be called, but using a
  # common listen socket callback object instead of a unique client
  # specific object.

}

$self->mux_eof;

$self->post_process_request_hook;

$self->mux_close;

This process then loops multiplexing between the accept() for the next connection and mux_input() when input arrives to avoid blocking either one.

HOOKS

The *_hook methods mentioned above are meant to be overridden with your own subroutines if you desire to provide additional functionality.

The loop() method of Net::Server has been overridden to run the loop routine of IO::Multiplex instead. The Net::Server methods may access the IO::Multiplex object at $self->{mux} if desired. The IO::Multiplex methods may access the Net::Server object at $self->{net_server} if desired.

The process_request() method is never used with this personality.

The other Net::Server hooks and methods should work the same.

$self->run_dequeue()

This hook only gets called in conjunction with the check_for_dequeue setting. It will run every check_for_dequeue seconds. Since no forking is done, this hook should run fast in order to prevent blocking the rest of the processing.

TIMEOUTS

set_timeout

To utilize the optional timeout feature of IO::Multiplex, you need to specify a timeout by using the set_timeout method.

$self->{net_server}->{mux}->set_timeout($fh, $seconds_from_now);

$fh may be either a client socket or a listen socket file descriptor within the mux. $seconds_from_now may be fractional to achieve more precise timeouts. This is used in conjunction with mux_timeout, which you should define yourself.

mux_timeout

The main loop() routine will call $obj->mux_timeout($mux, $fh) when the timeout specified in set_timeout is reached where $fh is the same as the one specified in set_timeout() and $obj is its corresponding object (either the unique client specific object or the main listen callback object) and $mux is the main IO::Multiplex object itself.

CALLBACK INTERFACE

Callback objects should support the following interface. You do not have to provide all of these methods, just provide the ones you are interested in. These are just like the IO::Multiplex hooks except that STDOUT is tied to the corresponding client socket handle for your convenience and to more closely emulate the Net::Server model. However, unlike some other Net::Server personalities, you should never read directly from STDIN yourself. You should define one or more of the following methods:

mux_connection ($mux,$fh)

(OPTIONAL) Run once when the client first connects if the allow_deny passes. Note that the $self->{net_server}->{server} property hash may be modified by future connections through Net::Server. Any values within it that this object may need to use later should be copied within its own object at this point.

Example:
$self->{peerport} = $self->{net_server}->{server}->{peerport};

mux_input ($mux,$fh,\$data)

(REQUIRED) Run each time a packet is read. It should consume $data starting at the left and leave unconsumed data in the scalar for future calls to mux_input.

mux_eof ($mux,$fh,\$data)

(OPTIONAL) Run once when the client is done writing. It should consume the rest of $data since mux_input() will never be run again.

mux_close ($mux,$fh)

(OPTIONAL) Run after the entire client socket has been closed. No more attempts should be made to read or write to the client or to STDOUT.

mux_timeout ($mux,$fh)

(OPTIONAL) Run once when the set_timeout setting expires as explained above.

BUGS

This is only known to work with TCP servers.

If you need to use the IO::Multiplex style set_timeout / mux_timeout interface, you cannot use the Net::Server style check_for_dequeue / run_dequeue interface. It will not work if the check_for_dequeue option is specified. The run_dequeue method is just a compatibility interface to comply with the Net::Server::Fork style run_dequeue but is implemented in terms of the IO::Multiplex style set_timeout and mux_timeout methods.

AUTHOR

Rob Brown <bbb@cpan.org>

MAINTAINER

Paul Seamons <paul@seamons.com>

LICENSE

This package may be distributed under the terms of either the
GNU General Public License
   or the
Perl Artistic License

All rights reserved.

SEE ALSO

Net::Server by Paul Seamons <paul@seamons.com>,

IO::Multiplex by Bruce Keeler <bruce@gridpoint.com>.