NAME
Lab::Moose::Instrument::KeysightE3633E - Keysight E3633E voltage/current source.
VERSION
version 3.920
SYNOPSIS
use Lab::Moose;
my $source = instrument(
type => 'KeysightE3633E',
connection_type => 'LinuxGPIB',
connection_options => {gpib_address => 15},
# mandatory protection settings
max_units_per_step => 0.001, # max step is 1mV/1mA
max_units_per_second => 0.01,
min_units => -10,
max_units => 10,
mode => 'CURR', # or 'VOLT'
);
# The source is either in 'CURR' or 'VOLT' mode.
# Step-sweep to new level.
# Stepsize and speed is given by (max|min)_units* settings.
$source->set_level(value => 9);
# Get level from device cache (without sending a query to the
# instrument):
my $level = $source->cached_level();
# Measure voltage and current (independent of used mode).
my $current = $source->get_current();
my $voltage = $source->get_voltage();
METHODS
Used roles:
source_range/source_range_query
Set/Get the output source range.
set_level
$source->set_level(value => $new_level);
Go to new level. Sweep with multiple steps if the distance between current and new level is larger than max_units_per_step
.
cached_level
my $current_level = $source->cached_level();
Get current value from device cache.
get_level
my $current_level = $source->get_level();
Query current level.
get_voltage
my $voltage = $source->get_voltage();
get_current
my $current = $source->get_current();
set_voltage
$source->set_voltage($value);
For XPRESS voltage sweep. Equivalent to set_level(value => $value)
.
sweep_to_level
Use rate limits (max_units_per_second, max_units_per_step) for sweep steps.
COPYRIGHT AND LICENSE
This software is copyright (c) 2024 by the Lab::Measurement team; in detail:
Copyright 2019 Simon Reinhardt
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.