0.0998 2014-03-31 15:27:14 America/Los_Angeles
[BUG FIXES]
- Fixed behavior and error message when the repository is not
writable by the user. Fixes GH #150. Thanks @bkysela.
0.0997 2014-03-23 20:36:48 America/Los_Angeles
[BUG FIXES]
- Fixed behavior of the --force flag on the new "update" command.
It now applies to all packages that might be updated, not just the
targets list on the command line.
[ENHANCEMENTS]
- When generating the title for the log message, only the targets
at the top of the dependency graph are listed, and only if they
(or one of their prerequisites) were actually affected by the
operation. In effect, redundant and prereq targets are therefore
excluded from the message. This attempts to fix GH #86. Thanks @akarelas.
0.0996 2014-03-22 21:12:29 America/Los_Angeles
[BUG FIXES]
- Added a workaround for Net::LibIDN, which was not being properly
indexed. If you experienced this problem, just `pull Net::LibIDN`
to correct it. This fixed GH #149. Thanks @perlpunk and @malbin.
0.0995 2014-03-18 21:12:56 America/Los_Angeles
[INCOMPATIBLE CHANGES]
- The argument for the "init" command is now the repository root
instead of the stack name. This makes the interface more convenient
and more familiar to git users. You can still specify the root
using the global --root option if you like. And the initial stack
name can be set with the --stack option.
[NEW COMMANDS]
- All the new command listed below are experimental. The interface and
behavior is subject to change. See the POD in each command for details.
- The "update" command pulls the latest version of packages. You can
ask to update all packages or just specific ones.
- The "merge" command joins the history of two stacks together. At the
moment, it is only capable of fast-forward merges.
- The "reset" command moves the head of the stack to a prior revision,
thereby discarding all subsequent revisions.
- The "revert" command creates a new revision that matches the state at
a prior revision.
[ENHANCEMENTS]
- The index file for each stack now contains artificial records for
each module that is included in the target version of perl. This
allows installers to cope with requests to install core modules,
which normally aren't present in a Pinto repository. If you pull
a dual-life module, it will mask the artifical records. The
artifical records never appear in a stack diff or listing.
NOTE: This change will take effect the next time you perform
any command that modifies the state of the stack.
[BUG FIXES]
- The "install" command threw an exception with a misleading error
message when using the -m option without --do-pull. Now, both the
-m and -M options are silently ignored when --do-pull is not used.
Fixes GH #145 (thanks, @hartzell)
0.0994_04 2014-03-17 21:33:08 America/Los_Angeles
0.0994_03 2014-03-16 00:38:40 America/Los_Angeles
0.0994_02 2014-03-15 23:07:23 America/Los_Angeles
0.0994_01 2014-03-05 01:04:46 America/Los_Angeles
- Changes consolidated above under version 0.0995
0.0994 2014-03-01 16:04:28 America/Los_Angeles
[ENHANCEMENTS]
- Improved the locking mechanism so concurrent read operations are
sometimes possible, especially during the "install" command. This
fixes GH #142.
0.0993 2014-02-23 14:03:28 America/Los_Angeles
[INCOMPATIBLE CHANGES]
- Pinto no longer sets the default port when connecting to a remote
repository. So in most cases, you'll have to explicitly add the port
number to the URI given as the --root. The default port that "pintod"
listens on is 3111. But if you're running "pintod" behind another server
(like Apache or Nginx) then you can probably omit the port number and
Pinto will use the default port that is appropriate for the scheme.
Closes GH #136. Thanks @spacebat.
[ENHANCEMENTS]
- When the repository is a local directory, it can also be expressed
using a file:// URI. This applies to both the --root option and the PINTO_REPOSITORY_ROOT environment variable. Fixes GH #128.
0.0992 2014-02-10 02:01:18 America/Los_Angeles
[ENHANCEMENTS]
- The "list" command now has a --all option that causes it to list
every package in every distribution in the repository, including past
releases and distributions that are not currently registered on any
stack. When using the --all option, the output includes two extra flags:
"m" means that the package is considered to be the main module in the
distribution. "x" means that the package can be included in the index.
For both of these, the flags will appear as "-" when they are false.
- The --packages, --distributions, and --authors filtering options on
the "list" command are now treated as regular expressions. Take care
to quote them if you use any special shell metacharacters.
[BUG FIXES]
- Fixed regression in the "pin", "unpin", and "unregister" commands
which resulted in a warning from DBIx::Class about returning multiple
rows for a find() query.
0.0991 2014-01-31 17:19:17 America/Los_Angeles
[INCOMPATIBLE CHANGES]
- The --skip-missing-prerequisites option has been replaced with two
separate options: 1) --skip-missing-prerequisite (without the final "s")
requires you to specify the name of the packages you want to skip. This
option can be repeated. 2) --skip-all-missing-prerequisites does not
require an argument and causes Pinto to skip all missing prereqs. These
options can be abbreviated as -k and -K respectively.
0.099 2014-01-28 12:30:49 America/Los_Angeles
[INCOMPATIBLE CHANGES]
- The logic that Pinto uses to construct the index has changed. The
index will now include packages only if they are contained in a file with a
matching name. For example, Foo::Bar must be in a file called Bar.pm. So
in effect, Pinto will only index packages that can be use'd or require'd and
thus form a dependency. This makes it more of a "module" index rather than
a pure "package" index like PAUSE. But Pinto has never promised to index
exactly like PAUSE anyway. The benefit is that it also fixes the problem of
Pinto indexing packages that it shouldn't.
- The aforementioned changes to the index logic will only apply when a
distribution is pulled to a stack where it isn't already registered.
Existing indexes will not spontaneously change just by upgrading Pinto. If
you wish to apply the new index logic to a distribution that already lives
in a certain stack, first use the "unregister" command to remove it from
the stack and then use the "register" command to bring it back with the
new logic.
[ENHANCEMENTS]
- For repositories that prohibit intermingled distributions in the index
(which is the default) the registration process has been optimized because we
can assume that all packages in the distribution are in the index. In some
cases, this can make the "pull" and "add" commands much faster, especially
for distributions that contain a large number of packages.
[BUG FIXES]
- When deciding if a prequisite is satisfied by the perl core, Pinto now
regards a package that is marked as deprecated in the target perl version
as if it has already been removed, thus causing Pinto to pull the prereq.
This makes Pinto consistent with the behavior of cpanm.
0.098_01 2014-01-28 01:43:19 America/Los_Angeles
- Changes consolidated above under version 0.099
0.098 2014-01-27 16:49:14 America/Los_Angeles
[IMPORTANT]
- This release contains a lot of new features. I strongly recommend
reading the manual pages for the "pull", "add", "log", and "diff"
commands as well as "pinto" itself for further explanation of the
enhancements mentioned below.
- Many of the new features in this release were financed by the Perl
community through a crowdfunding campaign. Thank you for your support.
Go to http://tinyurl.com/gopinto to see how it all happened.
[ENHANCEMENTS]
- Pinto can now use a web service provided by stratopan.com to locate
upstream packages and distributions. This can reduce memory consumption
during the "pull" and "add" commands by about 50%. And for distributions
with few dependencies, it can increase the speed of those commands by as
much as 300%. This feature will be enabled by default for new
repositories. For existing repositories it must be enabled manually by
adding "http://cpan.stratopan.com" as the (usually first) upstream
source in your repository configuration file.
- The "pull" command can now fetch a precise version of a package using
a version specification string such as "Moose==1.34" or "Plack>=2,!=4".
This means you can quickly build a repository with your current
depedencies and you only need to know the package name and version.
This feature will be enabled by default for new repositories. For
existing repositories it must be enabled manually by adding
"http://cpan.stratopan.com" as the (usually first) upstream source
in your repository configuration file.
- The "pull" and "add" commands now have a --skip-missing-prerequisites
flag that causes it to skip (but warn about) any prerequisite packages that
it cannot satisfy. You can use it to specify precisely which packages to
skip, or to skip all unsatisfiable packages. This option only has effect
when recursively pulling prerequisites.
- When using the --dry-run option, a diff report will be displayed,
showing all the changes that would have been made. If there were no
changes, nothing is shown.
- The diff reports now default to a concise format which only lists
the distributions that have changed in the index rather than each
package.
- All commands that show diff reports now have a --diff-style option
that controls whether to display the concise or detailed report. You
can also set the default style using the PINTO_DIFF_STYLE environment
variable.
- The "log" command now has a --with-diffs (or -d) option that causes
it to also display the diff from the previous revision.
- Pinto can now handle META files that contain prerequisites with
version ranges such as ">4, !=5, <=7". These are currently used by a
handful of distributions on CPAN, and they are gradually becoming more
common. Fixes GH #127.
[BUG FIXES]
- The "roots" command was returning way too many distributions
because it wasn't examining all the indirect dependencies.
- Fixed when pulling a precise package target (e.g. Foo::Bar==1.0)
that existed in a distribution that you already had.
0.097_04 2014-01-25 15:12:31 America/Los_Angeles
0.097_03 2014-01-23 13:07:22 America/Los_Angeles
0.097_02 2014-01-23 00:37:04 America/Los_Angeles
0.097_01 2014-01-17 12:46:28 America/Los_Angeles
- Changes consolidated above under version 0.098
0.097 2014-01-07 20:53:29 America/Los_Angeles
[BUG FIXES]
- Fixed compatibility with the exception objects thrown by the
latest version of Moose. However, Pinto itself does not require
the latest version of Moose.
0.096 2014-01-07 10:32:19 America/Los_Angeles
[ENHANCEMENTS]
- The exit status of the "list" command will now be non-zero if
you specify any search criteria and no matches are found. This
follows the behavior of the Unix "ls" command.
[BUG FIXES]
- Now requires Module::CoreList 3.03 or newer.
0.095 2013-12-22 23:38:28 America/Los_Angeles
[BUG FIXES]
- Fixed bug in the new "roots" command that caused it to report
far fewer distributions than it should.
[ENHANCEMENTS]
- A warning is emitted if you try to pull or add a Bundle
distribution. Pinto does not know how to automatically determine
prerequisites for a Bundle.
- A better error message is given when repository is not writable.
Previously, you were (incorrectly) told that the repository was
locked.
0.094 2013-12-22 00:36:27 America/Los_Angeles
[INCOMPATIBLE CHANGES]
- When pulling or adding a distribution which contains packages that
partially overlap with an existing distribution on the stack, then
all packages from the existing distribution are removed from the
stack, not just the overlapping ones. This means it is impossible
for the stack to contain only *some* of the packages from any
distribution.
In nearly all cases, this is what you want because you never want
to end up with an installation that has some packages from one
distribution and some packages from another. If you really want
your stack to contain the packages from both distributions like
the PAUSE index does, then Pinto probably isn't the right tool
for you.
[NEW COMMANDS]
- The "roots" command will list all the distributions that are
the root ancestors of the dependency graph which includes all
distributions in the stack. This command can be used to install
every distribution in the stack in one shot. There are some
caveats though. See the documentation for details.
0.093 2013-12-21 16:24:39 America/Los_Angeles
[INCOMPATIBLE CHANGES]
- The "add" and "pull" commands now have both --no-recurse and --recurse
options. This allows you to turn recursion off OR on, depending on
the default setting for the repository (see more about that under
ENHANCEMENTS). However, the -n shortcut for --no-recurse is no
longer available.
[ENHANCEMENTS]
- The pinto.ini configuration file may now contain a "recurse"
parameter that determines the default recursion behavior for
the "pull" and "add" commands. Setting it to 1 means those
commands are recursive by default. Setting it to 0 means
those commands are not recursive by default. Either way,
commands can always override that parameter using either the
--recurse or --no-recurse switches.
- pinto now falls back to using nano, pico, or vi if none of the
usual environment variables for controlling the editor are set.
This fixes #119. Thanks @borisdaeppen for the suggestion.
- The distributions listed in the generated title of the commit
message will now be sorted and deduplicated.
0.092 2013-11-20 11:07:50 America/Los_Angeles
[ENHANCEMENTS]
- Periods are now allowed in stack names, user names, and
property names. Note that author ids are still limited to
uppercase letters and numbers, to be consistent with PAUSE.
0.091 2013-10-25 12:09:52 America/Los_Angeles
[BUG FIXES]
- pinto now accepts remote repository addresses that use SSL
(i.e. those starting with "https://"). This fixes #123.
[DOCUMENTATION]
- Numerous spelling corrections and documentation improvements.
Big thanks to David Steinbrunner and Boris Däppen.
0.090 2013-08-23 14:41:34 America/Los_Angeles
[CODE CHANGES]
- None.
[DEPENDENCY CHANGES]
- Now requires version 0.010 Package::Locator, which respects your
environment variables for user agent proxy settings. This fixes #111.
0.089 2013-08-19 13:03:26 America/Los_Angeles
[CODE CHANGES]
- None.
[DOCUMENTATION CHANGES]
- Added Copyright declarations to files in etc/ so the Debian
packagers can avoid legal hassles when redistributing this code.
- Added an =encoding command to all POD. This should fix
whatever caused MetaCPAN to reject the last release of
Pinto. (Thanks rwstauner & oalders).
- Reformatted this change log to conform to the
CPAN::Changes::Spec (Thanks omega).
0.088 2013-08-15 10:49:36 America/Los_Angeles
[INCOMPATIBLE CHANGES]
- Both the "pull" and "add" commands will no longer fetch
development prerequisites by default. If you want to have them,
then add the --with-development-prerequisites (or --wd) option.
[NEW FEATURES]
- The "add" command now has an experimental --no-index option to
exclude certain packages from the index. This is useful when
Pinto finds packages in your distribution that it should not.
Thanks to Todd Chapman for the great suggestion.
- The "diff" command now accepts revision IDs as arguments, so
you can compare any two arbitrary revisions. Revision IDs can
be truncated to uniqueness. This feature was generously funded
by a grant from TPF.
- The "new" command now accepts a --target-perl-version option to
set the target perl version of the new stack. This affects how
Pinto decided if a prerequisite is satisfied by the core. If
you do not specify the --target-perl-version, then it defaults
the global value that is set in the repository configuration
file.
[ENHANCEMENTS]
- Improved the output from the "manual" command. Thanks to Tommy
Stanton.
- Optimized some queries to make it faster to register packages
on a stack. In the best cases, performance has improved by
about 150%. But in the average case, the limiting factor is
fetching and unpacking the upstream distribution, so you'll only
see a slight improvement there.
- If your username contains non-alphanumeric characters, they
will be stripped out when used as your author identity. This is
because the CPAN toolchain requires author ids to be
alphanumeric. Thanks to @chiselwright and @cebjyre.
- The "statistics" command now accepts a stack name, so you can
see the figures for any stack in the respository, not just the
default stack. This was a silly omission. I don't know why I
left it out.
[BUG FIXES]
- You can now edit the commit message when pinto is reading input
from a file or pipe, as long as STDOUT is connected to a
terminal. You can always just use the -m or -M options if you
don't want to edit the message.
- You can now change only the letter case when renaming a stack,
even on case-insensitive filesystems. So you can change "foo"
to "FOO". Previously, you had to change the name entirely, and
then rename it again to the desired case.
[INTERNAL CHANGES]
- Pinto no longers stores the file path and SHA digest of every
package it sees in the META, since many distributions on CPAN
don't have the right paths in there anyway. This allows Pinto
to index some (technically broken) distributions that it
otherwise couldn't. Pinto was never really using this
information anyway, and it will probably be removed from the
schema entirely in the next major upgrade cycle.
0.087_05 2013-07-29 23:03:41 America/Los_Angeles
0.087_04 2013-07-26 20:11:14 America/Los_Angeles
0.087_03 2013-07-21 01:16:50 America/Los_Angeles
0.087_02 2013-07-16 02:12:40 America/Los_Angeles
0.087_01 2013-07-09 01:06:47 America/Los_Angeles
[DEVELOPER RELEASES]
- Changes consolidated above under version 0.088.
0.087 2013-06-19 14:47:01 America/Los_Angeles
[INCOMPATIBLE CHANGES]
- When pulling, Pinto now takes the first satisfactory package
that it finds among the upstream repositories, rather than
taking the latest one. This only matters if you specify
multiple upstream repositories. To get the old behavior, use the
new --cascade option on the "pull" and "add" commands. Thanks
@hesco for helping me sort this out.
- The "version" command has been removed. Now that all Pinto
components ship together, they all have the same version number.
So there is no need for a special version command. If you want
to know what version of pinto you have, just use the --version
option.
- Author IDs must now match /^[A-Z]{2}[-A-Z0-9]*$/. In other
words, two ASCII letters followed by zero or more ASCII letters,
digits, or hyphens. If you use lowercase letters, they will be
automatically forced to uppercase for you. This was done
because cpanm relies on author IDs following the PAUSE
convention. I had hoped that Pinto could be more liberal about
author IDs, but it seems we must conform so that we can
cooperate with the rest of the toolchain.
- The --no-history and --allow-duplicates repository
configuration parameters are no longer supported. I had created
those so you could try mirroring CPAN with a Pinto repository.
But I have decided that use case is out of scope for Pinto. If
you realy want a mirror of CPAN, use CPAN::Mini or rsync.
[ENHANCEMENTS]
- The names of those kind souls who generously helped finance
Pinto through the crowdfunding campaing on Crowdtilt are now
listed in Pinto::Manual::Thanks. There is also a related Easter
egg among the pinto(1) commands -- see if you can find it!
See http://tinyurl.com/gopinto to learn more about the campaign.
- Pinto::Server (a.k.a. pintod) will abort the action if it
looses the connection with the client. So, for example, you can
press Ctrl-C in the middle of pulling a long chain of
dependencies into a remote repository and the server will
immediately stop and roll back the entire transaction.
- The progress meter is now visible when using a remote
repository. The progress meter is never shown when --verbose or
--quiet is set, or when STDERR is not connected to a terminal.
- The "init" command now has a --target-perl-version switch that
sets the default target_perl_version property for all new
stacks. This is handy if you know that all stacks will be
targeting a perl that is different from the one you are using to
run pinto.
[BUG FIXES]
- The "install" command can now be used on a locked stack, but
only if the --do-pull option is not given. If you want to pull
packges while installing, then you must unlock the stack first.
Thanks Jeremy Marshal.
- The "install" command can now be used on a remote repository
that has basic HTTP authentication enabled. Beware that cpanm
does not sanitize passwords from its log messages. I'm working
with miyagawa to fix that.
- Pinto::Server now cleans up child procs. No more zombies!
- Cleaned up some extraneous dependencies.
- Fixed several typos in the documentation.
0.086 2013-06-18 02:45:38 America/Los_Angeles
0.085 2013-06-18 02:45:38 America/Los_Angeles
[BROKEN RELEASES]
- Changes re-consolidated above under version 0.087.
0.084_02 2013-06-16 20:54:06 America/Los_Angeles
0.084_01 2013-06-16 00:53:47 America/Los_Angeles
[DEVELOPER RELEASES]
- Changes consolidated above under version 0.087.
0.084 2013-05-14 17:24:22 America/Los_Angeles
[ENHANCEMENTS]
- Revised documentation for pintod.
[BUG FIXES]
- Now requires verison 0.018 of Test::LWP::UserAgent or newer
which resolves some test failures in Pinto seen by CPAN Testers
using older versions of T::LWP::UA.
0.083 2013-05-13 14:36:21 America/Los_Angeles
[ENHANCEMENTS]
- Improved password prompting, so it still works when STDIN
and/or STDOUT are not connected to a terninal anymore.
- Revised and corrected errors in documentation.
- The etc/ directory has a sample init.d script (thanks @hesco).
0.082 2013-04-29 09:42:43 America/Los_Angeles
- Just minor changes so Pinto will run on perl 5.8.9
0.081 2013-04-26 13:51:32 America/Los_Angeles
- Just a minor change in test code to prevent failure occasionaly
seen on Unix boxen.
0.080 2013-04-26 10:41:19 America/Los_Angeles
[HEADLINES]
- Pinto::Server and Pinto::Remote have been merged into this
distribution, so everything ships together. It also means both
Pinto::Server and Pinto::Remote are now working again. Woot!!
There is one caveat: when using a remote repository, pinto will
not display the diff and prompt you to edit the commit message.
Instead, it will automatically use the default generated message
or the message you specified at the command line. I hope to fix
this soon.
[BUG FIXES]
- pinto(1) and pintod(1) will now be installed with a fixed
shebang, so that they will always run with the same version of
perl, even if you use perlbrew to switch to a differnt perl
(thanks @punter)
- pinto(1) will now show the progress meter when reading input
from a file. The progress meter will be hidden whenever STDERR
is not connected to a tty. Use the --verbose or --quiet option
to forcibly hide the progress meter.
- Pinto now indexes "inner packages" so distributions like
mod_perl will be indexed (more) correctly. I had misunderstood
how PAUSE worked. Thanks @miyagawa.
0.068 2013-04-04 22:41:55 America/Los_Angeles
- Now using Module::Build::CleanInstall, which removes files from
the last installation before installing. This should help
prevent build failures for those coming from versions prior to
0.066. Thanks to Joel Berger for creating the wonderful
M::B::CleanInstall!
- Worked around bizzare bug that caused DateTime::TimZone to blow
up with a "locate object method" exception on perl 5.14. Root
cause has not been determined.
0.067 2013-03-30 00:23:36 America/Los_Angeles
- Only minor refactoring. No functional or interface changes.
- Explicitly requires Term::ANSIColor 2.02 or later. Thanks CPAN Testers!
- Requires Pinto::Common 0.068, so you'll have better documentation.
0.066 2013-03-26 16:18:06 America/Los_Angeles
[HEADLINES]
- Your MUST uninstall both Pinto and App::Pinto before installing this.
- For local repositories, you'll need to have App::Pinto 0.066 or later.
- This release is not (yet) compatible with any Pinto::Server.
[IMPORTANT]
- Bad news: This version of Pinto is not compatible with
*existing* repositories. To migrate, you'll need to create a new
repository (using this version of Pinto) and then "pull" all the
distributons from your old repository into the new one. Repeat
this process for each stack. Unfortunatley, you will loose your
revision history. If you bug me about it, I'll write a script to
automate this for you. I am thaljef@cpan.org.
- Good news: This version of Pinto has hooks to do future
migrations automatically. So any repository you create with
*this version* of Pinto can be easily migrated to any future
versions. I'm also pretty confident that the schema is now
stable, so a migration will not be required for a while.
[CHANGES]
- Switched from using Archive::Tar to Archive::Extract. The
latter will attempt to use tar(1) to unpack the archive, which
works much better with older archives. This is a bit slower
however. If you don't have tar(1), it falls back to using
Archive::Tar internally.
- Switched from using HTTP::UserAgent to HTTP::Tiny. This cuts
out one non-core dependency. But some of Pinto's upstream
dependencies probably still use HTTP::UserAgent, so the net
effect is moot.
- The version control subsystem has been completely redesigned.
Pinto now stores full snaphots of the stack at each revision and
organizes them in a directed graph, much like Git does. Each
revision is now identified by a unique non-sequential identifier.
- The interface with the terminal has been completely redesigned.
You'll see fewer (but hopefully better) diagnostic messages when
running in verbose mode. And if not verbose, then you'll see a
progress meter. If you still want to see all the gory details,
then set the PINTO_DEBUG environment variable.
- The logger has been completely removed, so Pinto no longer
records diagnostic messages. Recording them never proved to be
useful anyway. All the important changes to the stacks are still
recorded in the revision log though.
- Several Action classes have been added, removed, renamed, or
repurposed. The specifics are not described here because the
Pinto API is still private. See the change log for App::Pinto
for a description of all the public interface changes.
0.065_06 2013-03-23 00:22:57 America/Los_Angeles
0.065_05 2013-03-20 16:21:57 America/Los_Angeles
0.065_04 2013-03-20 16:06:15 America/Los_Angeles
0.065_03 2013-03-19 15:52:24 America/Los_Angeles
0.065_02 2013-03-15 23:39:27 America/Los_Angeles
0.065_01 2013-03-15 16:19:38 America/Los_Angeles
[DEVELOPER RELEASES]
- Changes consolidated above under version 0.066.
0.065 2012-11-14 09:55:54 America/Los_Angeles
[Interface Changes]
- In commit messages, all lines starting with '#' are discarded.
Previously, we figured out the start and end of the message
based on other landmarks, but that isn't very reliable.
- Commit timestamps are now reported in the format that is right
for your locale. However, they are reported in UTC, not the
local timezone. I will fix this in the next release.
[New Features]
- Commit messages are now parsed into separate title and body
sections. The message prompt will advise you to put the title
on the first line, followed by one blank line, followed by the
body (just like with Git). We make some attempt to be lenient
with the parsing, in case you don't follow the suggetion.
0.064 2012-11-12 13:29:50 America/Los_Angeles
[New Features]
- If running in an interactive environment and the PINTO_PAGER or
PAGER environment variable is set, then Action output will be
sent to it. Log messages still go to STDERR and will not be
sent to the pager.
0.063 2012-11-12 11:58:29 America/Los_Angeles
[Important]
- This version of Pinto is not compatible with repositories that were created
with prior versions. Please contact thaljef@cpan.org if you need to migrate an
old repository.
[New Features]
- Now has a Rename action, to change the name of an existing
stack. You'll need a newer App::Pinto to utilize this action
(Schwern).
[Bug Fixes]
- The Delete action actually works now (Schwern, Holybit).
0.062 2012-11-08 10:52:02 America/Los_Angeles
[Interface Changes]
- If the commit message for a Committable action is empty (but
defined) then we automatically fall back to using the default
message.
[Interal API Changes]
- Actions that take a stack name argument can now accept a stack
object as well.
- Pinto::Util has been moved from this distribution to Pinto-Common.
0.061 2012-10-30 17:19:10 America/Los_Angeles
[Interal Changes]
- Some query optimizations, to benefit alpha.stratopan.com
- Stack and Revision objects are now sortable. In string
context, Stacks sort by name. In numeric context, they sort by
Revision. Revisions sort chronologically.
0.060 2012-10-23 10:57:41 America/Los_Angeles
[New Features]
- You can now set the default stack at the same time that you
create or copy a stack.
[Other Changes]
- The output of the Blame action now has the familiar format of
the List action, and records are sorted by package name.
0.059 2012-10-20 00:52:34 America/Los_Angeles
[Important]
This version of Pinto is not compatible with repositories that
were created with prior versions. Please contact thaljef@cpan.org
if you need to migrate an old repository.
[Interface Changes]
- Stack names and property names are no longer forced to
lowercase. Instead, we preserve the original case when they
are created. But subsequent comparisons or lookups are done
irrespective of case.
- Author IDs are no longer forced to uppercase. However, the
author ID in the canonical path for any distribution that you
add will always be uppercase, which is consistent with PAUSE.
When listing distributions/packages for a certain author, the
comparison is done irrespective of case.
[Other Changes]
- Made several schema optimizations to help support Stratopan,
the upcoming cloud-based service built on Pinto. For a
preview, check out http://alpha.stratopan.com
0.058 2012-10-11 22:47:23 America/Los_Angeles
[New Features]
- Added the Blame action, which reports who last modified each
package in the stack. You'll need App::Pinto-0.052 to utilize
this action.
[Bug Fixes]
- When pulling prereqs, Pinto would pull the latest version of
the package across the entire repository, rather than taking
the version that is already on the stack. If the package that
is on the stack does not exist or is too old, *then* you get
the latest version in the repository. And if that does not
exist or is too old, *then* we get the latest version from an
upstream repository.
0.057 2012-10-07 12:28:37 America/Los_Angeles
- The Pull action will ignore requests for packages that are in
the Perl core, unless you explicitly request a version of the
package that is newer than the core.
- Removed stray dependency on Pinto::Store::File. That module
has been deprecated and no longer ships with Pinto (holybit).
0.056 2012-09-27 13:40:56 America/Los_Angeles
[Important]
This version of Pinto is not compatible with repositories that
were created with prior versions. Please contact thaljef@cpan.org
if you need to migrate an old repository.
[New Features]
- Added the Replace action, which substitues one dist for another
on all stacks. You'll need to upgrade App::Pinto to get the
corresponding 'replace' command.
[Other Changes]
- Significantly improved performance, especially for large
repositories. Pinto can now hold the *entire* CPAN (not just
the tip) and still perform reasonably well.
- Changed the way prereqs are discovered. We now trust the
dist's own META to tell us the prereqs, rather than configuring
the dist directly. This is much faster and usually just as
accurate. The only casualties are old dists that don't have a
META file, or ones that compute prereqs dynamically during
configuration. So it ain't perfect, but it is probably good
enough.
[Bug Fixes]
- Pinto can now cope with distributions that contain no packages.
These are relatively rare but they do exist on CPAN, usualy in
the form of distributions that contain only scripts.
0.055 2012-09-20 13:33:57 America/Los_Angeles
[Interface Changes]
- For the List action, the magic stack name is now '%' instead of
'@'. This was changed to distinguish it from revision strings
that look like stack@1234.
- The username attribute is now attached to the Config, not the
Action. This makes it available to any object that needs it
(particularly when creating a Revision).
0.054 2012-09-19 22:02:57 America/Los_Angeles
- Added a workaround so Pinto can cope with the nonsensical
common::sense module.
0.053 2012-09-19 20:58:46 America/Los_Angeles
[Bug Fixes]
- For all committable actions, a commit message is required only
if the action actually changed the state of the repository. A
commit message is never required for a dryrun action.
[Other Changes]
- Requires DBIx::Class-0.08200 or newer. In certain earlier
versions, prefetching was broken.
* The Install action is now committable, but it only matters
when it is also pulling packages.
0.052 2012-09-18 16:15:38 America/Los_Angeles
[Important]
This version of Pinto is not compatible with repositories that
were created with prior versions. The way that archives and
indexes are stored on the filesystem has been made simpler
and faster. If using Pinto::Server, you'll need to upgrade
that too. Contact thaljef@cpan.org if you need a migration
path for an existing repository.
[New Features]
- Now supports a Revert action, which restores the stack to a
prior revision. This is light-weight form of version control.
- Now supports a Log action, which displays the history of
changes to a stack.
- Each action that changes the state of the repository now
requires a commit message. You can pass this into the API, or
it will prompt for one via your editor.
[Other Changes]
- The Index action is no longer supported. Now that each stack
has its own index file, I see no need to have this Action.
- Orphaned archives are now automatically cleaned whenever you do
an Add or Pull action with dryrun enabled.
- Now requires Dist-Requires-0.008, which fixes some test
failures on some platforms.
0.051 2012-08-15 18:27:34 America/Los_Angeles
- More hacking to workaround the broken prefetch feature in
DBIx::Class. May result is slightly slower performance now
that we have to make more trips to the database.
- Added the Clean action to remove orphaned archives from the
filesystem. The Pull and Add actions now automatically clean
up if doing a dryrun.
0.050 2012-08-15 14:26:13 America/Los_Angeles
- I've worked around the bug that required you to use a
development version of DBIx::Class (see previous release notes
below). So now you don't have to manually install anything.
0.048 2012-08-15 09:05:19 America/Los_Angeles
- Prefetch is broken in DBIx::Class-0.08198 (see RT #78456) so
Pinto now requires DBIx::Class-0.08198_01 or later. At the
moment, this is only available as a dev release, so you may have
to install it manually before building Pinto. For example:
$ cpan JROBINSON/DBIx-Class-0.08198_01.tar.gz
0.047 2012-08-13 17:21:03 America/Los_Angeles
- Added a hook for controling the lockfile timeout via an
environment variable. This makes testing for Pinto::Server and
Pinto::Remote faster.
0.046 2012-08-13 15:17:18 America/Los_Angeles
[Important]
- Removed workaround for bug that appeared in DBIx::Class-0.08198.
We now require DBIx-Class-0.08198_01, which is only a developer
release at the moment. So you may have to fetch that dependency
manually.
[Bug Fixes]
- Partially resolved #14, where Pinto would blow up if you
asked it to pull a core-only package. In this case, it
really should give you a warning. But for now, it just
silently skips it.
[Other Changes]
- Pinto::Tester now constructs the repository on disk
immediately upon constructing the object. Before, you
had to access the pinto attribute to trigger it to
write anything to disk.
0.045 2012-07-23 23:14:42 America/Los_Angeles
[Bug Fixes]
- Tests were failing with the latest version of DBIx::Class.
I think the root cause is in DBIx::Class itself (see RT #78456)
but until that is resolved, I've done a workaround.
0.044 2012-07-15 01:39:18 America/Los_Angeles
[Bug Fixes]
- The magic stack named '@' (meaning all stacks) did
not work.
0.043 2012-06-19 10:47:15 America/Los_Angeles
[Bug Fixes]
- Prevent writing to closed handle, when running the install
action via pinto remotely.
- Now requires Dist::Metadata 0.923 or newer, which indexes
more like PAUSE does it.
[Other Stuff]
- Some minor performance optimizations, to reduce the number of
trips to the database.
0.042 2012-05-17 21:55:19 America/Los_Angeles
- finally{...} doesn't seem to work properly on older perls, and
this caused several test failures. According to the perldelta,
5.14 introduced several changes to exception handling. So I've
moved the exception handling into the catch{...} block. I don't
know why, but this seems to work better.
0.041 2012-05-15 11:13:27 America/Los_Angeles
[Important]
- There have been major changes to the interface and behavior of
Pinto (read more below). Beware this version of Pinto is NOT
compatible with repositories created with any previous version of
Pinto. If you have an existing repository and you really, really
need to preserve it, then contact me and I can work with you to
develop a migration plan. Also, many of the internal modules
have been moved around, so I strongly suggest that you remove
existing versions of all the Pinto libraries and scripts before
installing a new one on top of it.
[New/Changed/Removed Features]
- Pinto now supports multiple indexes called "stacks". So you
could have one stack of dependencies for application X and a
different stack for application Y (or one for development, one
for production, etc). Each stack can contain different modules
and/or different versions of those modules. It's like having
several repositories in one.
- Stacks can be copied and merged, much like a version control
system. This allows you to experiment with new dependencies
without impacting other stacks. If you have multiple
applications with different dependencies (or just different
versions of them), this also gives you a way to gradually
converge dependencies. Likewise, it allows you to fork
dependencies if two applications need to diverge in some way.
- The VCS integration has been removed. Most of the people I've
talked with did not find this feature particularly useful, since
you can't really branch & merge a repository (the database is
binary). This was also the most rickety part of the system.
- The "pinto-admin" and "pinto-remote" applications have been
consolidated into one application called "pinto". It will use
the appropriate backend (either Pinto or Pinto::Remote) depending
on whether the repository root is a local directory or a remote
URL. However the backends ship separately from the application,
so you must choose which to install (or you can choose both).
- The pinto application also has an "install" command, which
functions as a stand-in for cpanm. It is wired to pull
distributions only from your repository, using the stack of your
choice.
- Pinto no longer supports mirroring CPAN. I've found that it is
difficult to manage application dependencies in the context of an
entire mirror of CPAN. Most people only care about the stuff
their application needs, so they don't really need a snapshot of
the entire CPAN. If you really want that, then CPAN::Mini does a
fine job.
- Pinto no longer allows you to remove archives from the
repository, so the "clean", "purge", and "remove" commands are
gone. Eventually, my goal is to make Pinto behave just like a
VCS, where nothing is really deleted and you can always revert
back to a previous version. So you'll be able to take a
distribution off of a stack, but the .tar.gz file never really
goes away.
- Pinto no longer enforces any sort of permissions on package
namespaces. Previously, Pinto only allowed the original author
to update a package (just as PAUSE does). But the restriction
was only advisory -- you could just bypass it by changing your
author identity. Now, Pinto doesn't even bother with that -- any
user can upgrade any package. All the activity is logged to a
file so you can see who changed what, but Pinto expects you to be
accountable for your actions.
- Pinto now tracks dependencies between the distributions within
the repository. So it can potentially tell you which
distributions need to be tested after upgrading a module, or
whether the stack actually contains sufficient modules to satisfy
all the prerequisites for all the distributions in the stack. I
haven't yet written those commands, but the data is in there.
0.040_003 2012-05-04 21:38:07 America/Los_Angeles
- Fixed bug in 35-install.t that would cause the test to fail
(instead of skipping) if cpanm was not installed. Thanks
Andreas!
- Switched to using File::NFSLock instead of Lockfile::Simple. The
latter uses some deprecated syntax that causes lots of ugly
warnings on newer perls.
- Still alpha testing.
0.040_002 2012-05-04 16:19:11 America/Los_Angeles
- Added Action::Install. Still alpha testing.
0.040_001 2012-05-01 13:12:34 America/Los_Angeles
- This is a developer release for alpha testing the stacks feature.
0.038 2012-04-16 18:14:57 America/Los_Angeles
[New Features]
- The "import" command will now import a particular distribution
if you specify it using the right notation. See POD for details
(Steven Leung).
[Bug Fixes]
- The Git store would fail if you specified the --root as a
relative path that contained any "../" updirs (William Wolf).
0.037 2012-04-10 19:57:09 America/Los_Angeles
- No code changes. Just fixed dependency declarations.
Thanks CPAN Testers!
0.036 2012-04-09 00:14:50 America/Los_Angeles
[New Features]
- Pinto now logs activity to $root_dir/.pinto/logs/pinto.log
(Karen Etheridge). You can set the logging level in the
repository's config file.
[Other Stuff]
- A lot of files have been moved around in this release (and the
last couple releases). I suggest removing your current Pinto
before installing this one, to avoid accumulating cruft.
0.035 2012-04-04 19:00:35 America/Los_Angeles
[New Features]
- The value for the --author option now defaults to the 'user'
specified in your ~/.pause file. If that file does not exist,
then it still defaults to your current login username.
[Other Changes]
- All diagnostic messages from pinto-admin now go to STDERR
rather than STDOUT. So you can cleanly directy the output
into a file (like with the `list` command).
- Refactored a lot of redundant code into roles that are shared
with Pinto::Remote. But if you're not looking at the Pinto
internals, you won't notice it.
0.033 2012-03-15 06:55:39 America/Los_Angeles
[Bug Fixes]
- Corrected documentation about the environment variable
controlling the default location of the repository.
Thanks fibo.
- The index file is now properly updated after doing an
import operation. Thanks throughnothing.
0.032 2012-03-01 10:36:25 America/Los_Angeles
[Bug Fixes]
- Worked around a problem that caused the PAUSE indexer to
reject the last release.
- Added an accurate line-count to the 02packages file so that
cpan(1) doesn't complain about it.
0.031 2012-02-28 05:19:58 America/Los_Angeles
[Bug Fixes]
- Fixed bug in the create command. Not sure how this ever
worked before.
[New Features]
- The "add" command now recursively imports all the dependencies
by default. To disable this behavior use the --norecurse option.
0.030 2012-01-26 22:00:32 America/Los_Angeles
- The --repos option for pinto-admin has been officially
renamed to --root. This was done to create a symmetrical
API between Pinto and Pinto::Admin. The old --repos option
will *not* be supported for backward compatibility.
0.029 2011-12-15 00:24:11 America/Los_Angeles
- The 'list' command now has --index and --noindex options to
filter the output to packages that are in the index, or not
in the index, respectively.
- The 'list' command now has --pinned and --nopinned options to
filter the output to packages that are pinned, or not pinned,
respectively.
- The default output format for the 'list' command now includes a
'+' character to indicate whether a package is pinned.
- Some improvements to Pinto::Store::VCS::Git, which allow you
to place your Pinto repository anywhere inside a Git repository.
0.028 2011-12-12 01:22:02 America/Los_Angeles
- I discovered that Subversion 1.7 changed the working copy layout
in a way that caused Pinto to run exponentially slower as the
repository got bigger (like when mirroring the CPAN). I've fixed
this now.
- pinto-admin now has a 'statistics' command that will report
some basic stats about your repository. I plan to add more
stats in the future.
- You can now store your repository with Git using either
Pinto::Store::VCS::Git or Pinto::Store::VCS::Git::Remote.
These are both experimental, so use with caution.
- Mirror actions are now a bit faster, espeically when you
already have most of the distributions in the source
repository.
- The VCS log message used for the commit is now also used
as the message for the tag operation.
- Pinning a devel package is only allowed if this repository
is configured to index devel packages.
0.027 2011-12-08 15:23:00 America/Los_Angeles
- The 'list' command now has options to filter the output
to either packages or distributions that contain some
substring. This is not as powerful as a regex, and you
can only filter on the package name or dist path. But
this will make things go much faster.
- Fixed numerous bugs in the VCS integration. This was totally
broken. That's what I get for not writing regression tests
in that area.
- Fixed compatibility issue with Pinto::Remote.
- Added or improved some log messages.
- Revised some documentation.
0.026 2011-12-07 11:47:27 America/Los_Angeles
===============================================================
IMPORTANT: This version of Pinto is not compatible with
repositories built with any prior version. In theory, you can
migrate your old repository with the right combination of
pinto-admin and VCS commands. If you really want to try
migrating your old repository, please contact me for guidance.
Otherwise, you'll have to create a new repository and 'add' each
of your local distributions again. If you have foreign
distributions in your repository then you'll have to 'mirror'
them again too, but you might not get exactly the same versions
that you used to have (because they are no longer the 'latest'
version on CPAN).
I know this sucks, but it is definitely worth the upgrade. This
version of Pinto is faster, more reliable, and packed with new
features. And going forward, I'll be able to maintain backward
compatibility or at least provide an automated migration path.
================================================================
* New Features:
Pinto now uses a SQLite database to store information. This
improves performance, reduces memory consumption, and ensures
data integrity. Pinto is single threaded and permits only one
database connection at a time, so it is safe for NFS (or so I've
been told by SQLite experts).
Pinto now behaves more like PAUSE, and will accept distributions
with overlapping packages. As always, only the 'latest' version
of a package appears in the index file. And just like PAUSE,
Pinto tries to figure out the lineage of packages (i.e. which
version came first, second, third, etc.) by looking at version
numbers and file timestamps. So you can throw a pile of archives
at it without having to think about putting them in a certain
order (See POD for details). You can also remove a distribution,
and the "prior" versions of its packages will automatically become
the latest.
A Pinto repository can now be used with the cpan[1] utility. It
should also work with cpanp[1], but I haven't tried it. And of
course it still works with cpanm[1]. However, Pinto does not
provide a full 01mailrc.txt.gz or 03modlist.data.gz file. So
cpan[1] features that rely on those files may not work.
Pinto can now pull foreign distributions from multiple
repositories. You can use this to fall back to another
repository if one of them is offline (which sometimes happens
with CPAN mirrors). Or you can use this to create a network of
repositories that may each have different sets of distributions.
I'm not sure if this is actually a good idea, but we'll see.
Pinto does the-right-thing with development distributions (See
POD for details). And each Pinto repository now has a 'devel'
configuration parameter. Setting this to a true value instructs
Pinto to include development releases in the index. The default
is false.
The 'create' command for pinto-admin now accepts options that set
the parameters in the config file that is generated for the new
repository.
The 'list' command for pinto-admin now accepts a --format option
that can be used to customize what/how information is displayed.
The 'remove' command for pinto-admin now works for both foreign
and local distributions. However, there is a caveat when
removing foreign distributions (See POD for details).
The 'rebuild' command for pinto-admin now has a --recompute
option that causes Pinto to recompute the 'latest' version
of all the packages (See POD for details).
pinto-admin now has a 'manual' command for displaying the full
manual for a particular command.
pinto-admin now has a 'version' command for displaying version
information.
pinto-admin now has a 'purge' command that removes everything
from your repository.
pinto-admin now has an experimental 'import' command that fetches
a remote package or distribution (and its dependencies,
recursively) and puts all of them in your local repository.
pinto-admin now has the 'pin' and 'unpin' commands, which can be
used to tie the index file to a specific version of a package.
This lets you evolve your repository while keeping certain
packages fixed. Very cool! See POD for details.
Most of the pinto-admin commands now have aliases. Thanks to the
awesomeness of App::Cmd, you can say 'pinto-admin rm' instead of
'pinto-admin remove'. The aliases are listed in the manual for
each command.
* Other Changes:
The config files for each Pinto repsoitory are now located in
$REPOS/.pinto/config.
The 'list' command for pinto-admin has been neutered. You can no
longer specify the --type or --indexed options. However, the
output does show whether the package is local/foreign and
indexed/unindexed, so you can grep on that to narrow the results.
I'm thinking of developing a query interface to let you select
which packages/distributions you want to list.
The VCS tagging mechanism has changed. Instead of making a tag for
every commit, a tag is made only when you specify the --tag option.
You can still put date/time placeholders in your tag name.
The 'noclobber' configuration setting has been removed, since it
was never implemented anyway.
The 'nocleanup' configuration setting is gone, and we no longer
support automatic cleanup. Instead, you have to run the 'clean'
action separately. You might want to setup a cron job for this.
The 'update' command is now called 'mirror'. I know, I keep
flip-flopping on that. But I think I've finally settled now.
The --force option on the 'mirror' (formerly 'update') command is
no longer supported. I'm thinking of changing the meaning of
"force" and might bring it back in a future release.
pinto-admin is a little less noisy by default. You can increase
the verbosity by repeating the '-v' option up to three times.
Now needs newer versions of Dist::Requires and
Dist::Metadata. Thanks CPAN Testers for shaking that out.
Pinto->new() will now blow up if you specify a root_dir that
doesn't actually look like a repository directory. To be valid,
it must have a database file, a modules directory, and an authors
directory.
Changed some log messages to be more helpful
and/or less noisy.
* Bug Fixes:
Fixed bug where Pinto might blow up with 'too many args' error
the first time you update from a CPAN mirror using the Svn store.
Fixed broken code (e.g. calling undefined methods) in several
places. Added more regression testing to catch this stuff.
Prevent uninitialized warning when using the 'list' command.
0.025_004 2011-12-06 21:11:00 America/Los_Angeles
0.025_003 2011-12-03 04:12:56 America/Los_Angeles
0.025_002 2011-12-02 04:39:19 America/Los_Angeles
0.025_001 2011-12-02 03:18:26 America/Los_Angeles
Net changes aggregated above in 0.026
0.024 2011-09-01 15:23:48 America/Los_Angeles
Added a "version" command to pinto-admin
General code refactoring
No interface changes
0.023 2011-08-31 14:18:49 America/Los_Angeles
* Interface Changes:
The "remove" operation now works on distribution names, rather
than package names. You must specify the full name of the
distribution, including version number and extension.
* Other Good Stuff:
Wrote the manuals for each of the pinto-admin commands.
Say `pinto-admin COMMAND --man` to see them.
0.022 2011-08-31 01:31:04 America/Los_Angeles
* Interface Changes:
You no longer need to specify the Subversion trunk in your
pinto.ini (if you were using Pinto::Store::VCS::Svn). The
location of your Pinto repository in subversion is implicit in
the `svn info` of the working copy. Secondly, the "create"
action no longer takes care of making a location in Subversion
for you. So you now have to do a little more work to setup Pinto
with Subversion. See the POD in Pinto::Store::VCS::Svn for
step-by-step instructions.
You can no longer specify a VCS tag in your pinto.ini. Making
a tag after every commit doesn't make sense. So now, a tag
is only made if you explicitly set a --tag on the command line.
Likewise, the --notag command line switch has been removed,
since the absence of a --tag is equivalent to --notag.
* Bug Fixes:
The "update" command was broken, following rename from "mirror".
Doh!
0.021 2011-08-30 01:16:55 America/Los_Angeles
* Interface Changes:
The "mirror" command is now called "update". I feel this more
accurately reflects what is going on, since a Pinto repository
isn't really a "mirror" of anything.
* Bug Fixes:
Fixed some bugs in the VCS tagging logic.
Fixed behavior when running under cron.
0.020 2011-08-28 20:40:43 America/Los_Angeles
* Enhancements:
Added the "rebuild" command, which reconstructs the master index
from the current local and mirrored indexes. This is useful if
your master index somehow gets screwed. Note this is not the
same as actually re-indexing the distributions (that's a feature
I might add later).
All commands for pinto-admin[1] now support a --man option, which
shows you the full documentation for a commmand. But at this
point, I haven't written the documentation for all the commands.
Several of the commands for pinto-admin[1] now support a --tag
option that allows you to specify an alternative tag. The
semantics of the tag will depend on which type of VCS you are
using. Likewise, you can now specify --notag to disable tagging
completely.
0.019 2011-08-24 04:09:41 America/Los_Angeles
* Bug Fixes:
The 'add' and 'remove' commands for pinto-admin were not reading
arguments from STDIN properly.
All svn commands would fail when running under pinto-server.
This was due to some strage behavior in IPC::Run that I can't
explain.
0.018 2011-08-24 01:45:21 America/Los_Angeles
Now using IPC::Run to handle external commands (like svn).
IPC::Run seems to behave better when running in a server
environment like pinto-server (via Dancer).
0.017 2011-08-24 00:50:09 America/Los_Angeles
* Interface Changes:
pinto-admin[1] is now zero-conf (at least, by default). However,
you must now specify the --repos for every command. Also, some of
the options for pinto-admin have been removed for safety, and are
now in the repository-specific configuration file (see below).
This helps to deter you from doing things that contradict the
usual behavior of your repository.
Each Pinto repository now has its own configuration file, which
governs its basic behavior. The configuration file is generated
with default values when you run the "create" command. This
allows you set up multiple repositories, each with a different
behavior and VCS store.
* Enhancements:
The "add" and "remove" commands for pinto-admin[1] can now read
arguments from STDIN. When doing so, it filters out things that
look like comments and blank lines. This makes it easy to pipe in
the output from a find[1] or dzil[1] command.
You can also specify arguments to the "add" command as URLs,
and Pinto will fetch them for you. (Suggested by Tim Bunce).
The "list" command now accepts a --type option, which will show
you either all packages, only local packages, only foreign
packages, or only local packages that block a foreign package.
(suggested by George Hartzell and Meg Green).
The "add", "remove", and "mirror" actions now accept a --message
option, which will be prepended to the VCS commit log that Pinto
generates (suggested by Jan Vogel).
Added "nocolor" command line option.
0.016 2011-08-18 02:00:12 America/Los_Angeles
Removed bin/pinto-client. That wasn't supposed to be in there,
damnit! Look for the Pinto-Remote distribution instead.
0.015 2011-08-18 01:54:39 America/Los_Angeles
* No interface changes or bug fixes.
* Internal Changes:
Improved exception handling.
Pinto now uses a lock file to synchronize concurrent actions in
the repository. Only one actor is allowed to operate in a given
repository at a time. Others have to wait until they can get the
lock, or timeout after about 60 seconds.
0.014 2011-08-17 16:09:48 America/Los_Angeles
* No interface changes or bug fixes.
* Internal Changes:
Several modules have been moved out to the Pinto-Common
distribution. This is to allow sharing between Pinto,
Pinto::Server, and Pinto::Remote without requiring direct
dependency on all of Pinto (including it's dependencies).
0.012 2011-08-17 09:10:25 America/Los_Angeles
* Bug Fixes:
Pinto::TestLogger didn't end with a true value. Thank you, CPAN
Testers!
* Internal Changes:
Switched from IPC::Cmd to Proc::Reliable for running shell
commands. IPC::Cmd seems to do funky things with STDIN
and STDOUT that don't set well with CGI.
You can specify an output filehandle or a buffer (as a scalar
reference) where you want the output from Pinto::list() to
go.
The output from the List action contains the name, version,
and location in each package, rather than just the name. This
was a regression in the last version.
* Other Changes:
pinto-server[1], pinto-client[1], and all the Pinto::Server::*
modules have been pulled out into a separate distribtuion,
which will be released to CPAN shortly.
0.011 2011-08-14 21:11:47 America/Los_Angeles
* Bug Fixes:
Fixed our call to File::Copy::copy() to accommodate older versions
which did not handle Path::Class objects properly. Thank you,
CPAN Testers!
0.010 2011-08-14 13:29:23 America/Los_Angeles
* Bug Fixes:
Fixed test failures that I introduced by renaming some classes in
the last release.
0.009 2011-08-12 17:50:28 America/Los_Angeles
* Interface changes:
pinto[1] is now called pinto-admin[1]. It still has all the same
options and arguments. Likewise, App::Pinto is now
App::Pinto::Admin.
With pinto-admin, the "mirror" parameter is now called "source".
This reflects the fact that your dists don't necessarily have to
come from a CPAN mirror. They just have to come from some place
that conforms to the CPAN structure. Do not confuse this with
the "mirror" command, which still does actually mirror the
aforementioned "source".
* Other changes:
Revised documentation.
Added some basic functional tests.
Created pinto-server and pinto-client, for using Pinto across a
nework. These are still very experimental.
Once again, a lot of the internals have been rewritten. But the
guts of Pinto are all private (for now), so you shouldn't really
care.
0.008 2011-08-09 14:47:02 America/Los_Angeles
* Interface changes:
The 'author' parameter is now entirely optional. It defaults to
your shell username, if we can figure that out. If not, then an
exception is thrown, and you'll have to set the 'author' parameter
explicitly.
pinto[1] now has --notag, --nocommit, and --noinit options. All
these can also be set in your configuration file. See the
pinto[1] documentation for details.
* Other changes:
The internals of Pinto have been substantially rewritten to
improve performance and readability of the code. The Pinto API is
still considered alpha, and subject to change.
0.007 2011-08-04 08:04:27 America/Los_Angeles
* Interface Changes:
A config file for pinto[1] is no longer mandatory. If you do not
have one, then you'll have to specify all required parameters on
the command line (this is usually just the '--local' and sometimes
the '--author' options). If you don't specify these, you'll get a
really ugly stack trace from Moose. I'll look into making these
error messages prettier in a future release. Thanks to b.jakubski
for suggesting this change.
* Bug Fixes:
RT #70015: Can't create repository. The 'create' command failed
because the 02packages file could not be read. This has now been
remedied.
* Other Changes:
Edited documenation for pinto[1]
0.006 2011-08-04 00:52:22 America/Los_Angeles
More documentation edits. No code changes.
0.005 2011-08-04 00:43:34 America/Los_Angeles
Brought the documentation for pinto[1] up to date with the
actual API.
0.004 2011-08-04 00:23:23 America/Los_Angeles
Default log level is now 1 (info).
pinto[1] now exits with status 0 if successful.
Improved some log messages.
0.003 2011-08-03 22:59:10 America/Los_Angeles
Major overhaul of internals. But the pinto[1] command line
interface is mostly the same.
0.002 2011-07-26 17:20:46 America/Los_Angeles
Corrected default path to the Pinto configuration file.
Expanded POD for pinto[1]
0.001 2011-07-26 14:17:06 America/Los_Angeles
Initial release.