Revision history for Alien::gdal
1.37 2024-05-28
- More effective search for the data dir for systems installs using homebrew
1.36 2022-11-28
- Unices: fix rpath check for lib, lib64 and lib32
1.35 2022-11-05
- Skip cflags and libs tests when upstream aliens are system installs
1.34 2022-09-19
- production release identical to 1.33_001
1.33_001 2022-09-15
- share builds
- move build system to Cmake (autotools will be removed in GDAL 3.6)
- fix logic for lib64 searches
- use https for download
1.32 2022-08-30
- share builds: handle shared Proj and GEOS that use lib64 instead of lib
1.31 2022-08-17
- share builds: rework rpath updates on unices
as the changes were being overridden before install
1.30 2022-04-13
- share builds: update rpaths of libgdal dylibs on macs
1.29 2022-04-02
- share builds: update rpaths of binaries on unix operating systems
so dependent .so files are found
- alienfile: remove patching code related to GDAL 2.x
1.28 2022-03-19
- share builds config: explicitly set optimisation flags
1.27 2022-01-31
- Fix shared builds when spatialite is enabled
- Add Geos lib dir to $ENV{LD_LIBRARY_PATH} on any non-windows system,
not just bsd.
1.26 2021-09-15
- alienfile: Add Geos lib dir to $ENV{LD_LIBRARY_PATH} to allow configure to pass
on non-Windows OSes for GDAL >=3.3.
1.25 2021-09-11
- Disable more drivers by default so as not to exceed the linker limits on windows.
1.24 2021-05-11
- Trim dangling -L in LDFLAGS for share installs on Windows.
Possibly affect(s|ed) other OSes.
1.23 2020-09-05
- Add Alien::Build::Plugin::PkgConfig::PPWrapper
to more places in Makefile.pl
1.22 2020-09-04
- Share builds:
- disable OGDI and mongocxxv3 due to build failures
- use Alien::Build::Plugin::PkgConfig::PPWrapper
1.21 20200107
- Share builds:
- Update makefile for long lines only on GDAL < 3.1.1,
as 3.1.1 has been patched.
- Existing install files will be re-used instead of rebuilt
if they satisfy the minimum version and
$ENV{ALIEN_SHARE_RECYCLE} is set to a true value.
1.20 20200602
- Share builds:
- Modify make steps to exit on first failure.
- Disable the OpenJPEG driver on CPAN testers.
Some GDAL configuration or packaging
issue is causing failures on BSDs.
- Apply fix for long makefile lines on all platforms.
This is harmless on those that have no line limits,
and is version guarded to GDAL<3.2.
1.19 2020-05-31 22:00 AEST
- Re-enable optional drivers on CPAN testers.
Interdependencies between drivers mean this
can cause build failures.
1.18 2020-05-31
- Add run_utility method
- Add --with-local arg to dragonfly builds
- Bump minimum Alien::proj to 1.13. As a result,
the minimum Proj version is now 6.1, so the
minimum GDAL version is 3.0.
1.17 2019-08-03
- Make sure we install GDAL 2.4 if Proj version is less than 6.0
1.16 2019-04-04
- Disable Alien::spatialite for now, as it needs
to be updated for recent proj changes. It will
still be linked to if it has been
pre-installed on a user's system.
1.15 2019-01-25
- Chain the dynamic libs from all alien deps.
Hopefully this will avoid some Geo::GDAL::FFI issues.
1.14 2019-01-05
- Add Alien::spatialite, Alien::proj, Alien::sqlite and Alien::freexl as dependencies.
This allows GDAL access to spatialite support, and also helps with Proj linkages.
- Set the Proj library name as an environment variable under Windows.
Otherwise the DLL provided with Strawberry Perl is not found by GDAL.
1.13 2018-11-27
- Add Alien::geos::af as a dependency. This gives us access to the GEOS library.
1.11 2018-11-09
- No further changes from 1.10 dev releases
1.10_004 2018-07-30
- use Alien::Build::Plugin::Cleanse::BuildDir
- add Sort::Versions as a configure and build dependency
- add URI::Escape and URI::File as dependencies
1.10_003 2018-05-14
- Abbreviate log output under more cpan tester rigs
- Minor alienfile cleanups
1.10_002 2018-05-14
- Update the alienfile for GDAL 2.3.0
- Much of the patching is now version specific to avoid build failures, e.g. on BSD
- some tests now also set $ENV{DYLIB_DIR}
1.09 2018-07-05
- No further changes from 1.08 dev releases
1.08_002 2018-05-06
- Mark the compilation test as to-do until we determine if
the failures to find libs are due to us or Alien::Test.
1.08_001 2018-05-06
- Dev release, marking more tests as to-do
1.07 2018-05-05
- Fallback to PkgConfig to find the share/gdal dir
- Use Test::Alien in tests
- Add test for utilities, although it is marked as to-do for
now due to dynamic lib issues in tests on some platforms
1.05 2018-05-02
- Add method to access the share/gdal directory. This contains the data distributed with gdal.
- Turn cpp11 back on, except for bsd cpan testers.
- Bump required Alien::Build version to 1.41.
- Miscellaneous other changes to address cpan testers failures.
1.04 2018-04-25
- Run make clean on cpantesters to reduce number of build artefacts.
- See also 1.03_* release notes.
1.03_010 2018-04-18
- Add patch file to manifest. It is needed on freebsd.
1.03_009 2018-04-17
- Disable static build options to reduce build size (it was too big for many cpan testers).
Total size should be ~1GB on most systems now.
1.03_008 2018-04-17
- disable cpp11 on freebsd to avoid CAD build failures
1.03_007 2018-04-16
- patch configure so we generate a shared build on freebsd
1.03_006 2018-04-16
- bsd variants use --with-local config arg to ensure /usr/local/include is used
1.03_005 2018-04-14
- try to add /usr/local/include to include path on bsd variants
1.03_004 2018-04-13
- use internal tiff library to avoid cpan testers fails
1.03_003 2018-04-11
- Use plugin for GNU make on bsd variants
1.03_002 2018-04-11
- Force use of gmake on freebsd
1.03_001 2018-04-10
- Use a dynamic build on all platforms by default
1.03 2018-04-04
- Add CI badges
1.02_005 2018-04-02
- insensitise OS regexp
1.02_004 2018-04-01
- Use correct quotes
1.02_003 2018-03-31
- More cpantesters feedback
1.02_002 2018-03-31
- More feedback that might help diagnose cpantesters results
1.02_001 2018-03-29
- See if we can truncate the build log for cpan testers, but display it if we get a failure
- Reformat the POD a little
1.02 2018-03-28
- update changes file for 1.01 changes
1.01 2018-03-28
- add github details to Makefile.PL
1.00 2018-03-28
- First release