ATTENTION!
Before using this for any _new_ software, please consider using Pod::Simple,
it is a modern replacement for this module.
02-Feb-2014 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.62
+ CPAN#87891: More sanity checks in podselect()
documentation patches by florent.angly@gmail.com, and a bit of stricter
checking what clients pass to podselect()
01-Jun-2013 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.61
+ CPAN#85656 fix typos in comments
31-Jan-2013 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.60
+ removed Pod::Checker and Pod::Usage from this distribution - they are now
separate distros and are subjects to be refactored, to be based upon
Pod::Simple. Thanks to rjbs for reminding me of this.
25-Jan-2012 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.51
+ CPAN#74271: Pod::Parser should not flag L<text|hyperlink>
undo change CPAN#47473: L<alt text|URL> _is_ allowed (see discussion on
pod-people and p5p); confirmed by blead change; references:
http://code.activestate.com/lists/perl-pod-people/1690/
http://code.activestate.com/lists/perl-pod-people/1393/
http://perl5.git.perl.org/perl.git/commit/f6e963e4dd62b8e3c01b31f4a4dd57e47e104997
+ bump all module versions (except Pod::PlainText) to 1.51
+ update META.yml (thanks rjbs for the hint)
16-Jan-2012 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.50
+ fix whitespace (esp. CR [\r] related) issues with different Perl versions
on Windows (with Perl 5.8.8 [Activestate], and 5.6.1 [SUA])
+ merge latest core (5.14.x) changes to this distro
+ CPAN#73446: fix minor POD error in InputObjects.pm
+ CPAN#43955: podchecker fails to detect superfluous =cut directive:
implemented (and extended by a check for superfluous =pod commands) and
documented in Pod::Checker; also added a note in the POD of all modules
that they are part of the Pod::Parser distribution
+ CPAN#46695: use consistent version (1.50) for distribution and all Pod::
modules in this distro (except for Pod::PlainText, which stays at 2.05)
+ CPAN#52086: mismatch between distro and module version:
same as above
+ CPAN#55121: correction for Pod::Find and t/pod/find.t on VMS
+ CPAN#47473: podchecker on L<> url with alt text
... causes an error in Pod::Checker now
+ CPAN#57954: Pod::Usage does not find perldoc when perl is relocatable
... use $Config{scriptdirexp} instead of scriptdir
+ CPAN#61223: podchecker notice missing blank line before command
implemented with more tests in poderrs.t and self test of all *.pms
+ CPAN#66614: parse of no final newline vs perl -w
... a rare case, but fixed nevertheless
+ CPAN#68157: Pod-Parser-1.38/lib/Pod/Usage.pm question/bug
... pass through formatting options to Pod::Text
+ CPAN#70771: mishandles symbolic links in @INC
... fixed by making the paths in @INC absolute, using Cwd::abs_path()
+ CPAN#71139: 3 possible optimisations
... applied
+ several other rt.cpan.org tickets processed and closed
09-Feb-2008 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.38
+ missed one (important) line from one of the patches below in pod2usage2.t
No change in the *.pm files
04-Feb-2008 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.37
+ fixed resource links in META.yml
+ address CPAN#42695 with a minor change in PlainText, although not solving
it completely; the 'loose' option now applies to all =headN headings
+ address failures of find.t on Win32 (cpantesters) - root cause was a
mismatch of directory names like "Progra~1" (short/long file names)
+ include the following bleadperl changes:
* Blank lines "between" verbatim sections are now acceptible:
http://perl5.git.perl.org/perl.git/commitdiff/caa547d
* Be less picky about what constitutes "numeric lists" in Pod:
http://perl5.git.perl.org/perl.git/commitdiff/4df4f5d
* Changes made to contains_pod.t when upgrading to 1.34:
http://perl5.git.perl.org/perl.git/commitdiff/fb59f97
* Fix paths on new pod2usage2 tests to work in the core.
http://perl5.git.perl.org/perl.git/commitdiff/222046efb22c183703fea2b30db76296ab782e89
* Make t/pod/pod2usage2.t work on case insensitive file systems.
http://perl5.git.perl.org/perl.git/commitdiff/767c16ab361d1225fb153423fb22b590c1e0c7ea
Thanks to Nicholas Clark, Steve Hay, Jerry D. Hedden for the patches
+ removed \r from t/pod/usage2.pod
19-Jan-2008 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.36
- Did I say this package is dead, and there won't be any updates?
This release is fixing all open CPAN RT issues, hopefully this is the
last version forever...
+ Ironed out the most severe issues reported by perlcritic, updated
META.yml
+ Adapted Makefile.PL such that CPAN should recognize dependencies better
+ CPAN#30672: Merged the minor change (recognize =encoding) from 5.10.0,
along with a few test improvements - thanks Adriano Ferreira for the patch
+ Assimilated changes from 5.8.9 on podchecker.PL
+ CPAN#23618: replace $Config{privlib} with privlibexp to avoid problems
with installation paths like ~user. Thanks clonezone for the patch
+ CPAN#24983: document that parse_from_file() accepts also file handle
references and objects that support the regular IO interfaces
+ added a little tweaking of Test::Builder to pod2usage2.t, which
should solve the problem with older Perls (5.005)
+ CPAN#29749: applied patch to squelch noise from older blib
versions. Thanks SREZIC
+ CPAN#29978: fixed insecure argument for running perldoc from
pod2usage() in -T scripts
+ CPAN#30043: add =cut as an indentifier for POD in Pod::Find.
Thanks NATERAJJ for the patch
+ CPAN#33020: Pod::Usage will by default look for both SYNOPSIS and
USAGE - since SYNOPSIS is the traditional section name, while USAGE
is suggested by perlcritic
+ CPAN#33150: made sure that pod2usage(-message=>'...') always
appears, even when using perldoc
+ CPAN#35514: add some documentation and a test to demonstrate how
pod2usage works together with Pod::Find::pod_where to show module PODs
+ CPAN#38648: pod2usage(-verbose => 1) now accepts whitespace after
SYNOPSIS. Thanks dwierenga AT valueclick DOT com for the patch
+ CPAN#38747: two important bug fixes and one improvement, all around
pod2usage(-sections). Many thanks David DOT Purdie AT erggroup DOT com
for the patches and suggestions. This fixes also CPAN#41136
+ CPAN#41135: allow subheadings in OPTIONS/ARGUMENTS and
pod2usage(-verbose => 1) - they are now printed as well
+ CPAN#42141: find.t fix for VMS in UNIX compatible mode. Thanks a lot
malmberg AT Encompasserve org for the patch
+ Fixed inconsistencies between Pod::PlainText and Pod::Text regarding
selection of sections; now both should work according to the docs of
Pod::Usage
+ verified on perl 5.8.8, 5.8.7, 5.6.1, 5.005.03 on Solaris 8 (Sparc),
perl 5.6.1, 5.8.7 on RedHat Linux 7.2,
perl 5.10.0 on Windows 2000,
perl 5.8.0, 5.6.1, 5.8.7, 5.8.8 on RedHat Enterprise Linux 3.0,
perl 5.8.5, 5.6.1, 5.8.7, 5.8.8 on RedHat Enterprise Linux 4.0
with various combinations of Pod::Text, Test::More etc.
27-Oct-2005 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.35
+ Did I say this package is dead?
+ Make version of distro equal Pod::Parser::VERSION on popular
request - although this is IMHO not a prerequisite (CPAN#17069)
+ Check for core changes to this module dist - there are none
+ Added support for =head3 in Pod::PlainText - who on earth is
using that one? Thanks David Wheeler dwheelerATcpanDOTorg (CPAN#17515)
+ Added support even for =head4 in Pod::PlainText (CPAN#15989)
+ Allow Pod::Usage to work with new and old versions of Pod::Text
Thanks steveiATfisharerojoDOTorg for the patch (CPAN#16368)
+ fall back to $PAGER|more if perldoc fails in Pod::Usage (CPAN#16901)
+ CPAN#17202 is somehow solved in this release
+ try to address CPAN#16959 by removing all extra line end characters
in line comparisons in test
+ added test to catch CPAN#17997, should it ever be a problem
+ address CPAN#19137 by a CAVEAT in Pod::Parser
+ CPAN#19933: PATCH to support L<Weblink|http://www.whatver.site>
thanks LGODDARD
+ CPAN#21010: Calling parse_from_file twice causes errors
my (...) = ... if(...); # is no good - had to split that
+ CPAN#15718: Documentation: -section argument should be -sections
+ minor change in Select.pm to solve an issue on Cygwin with ^M
+ CPAN#17997: Regression: -input no longer works with __DATA__ with -verbose => 2
thanks CLOTHO for the patch
+ ran a rough POD spell check
+ fixed test failure on Windows in pod2usage.t (CPAN#14928)
04-Oct-2005 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.34
+ yi luo luoyi.ly at gmail.com noticed that -x _ does not do the right
thing on Windoze with *.bat files, where -x $file does
+ JHOBLITT at cpan.org sent a patch to make contains_pod accept files that
start with =head on the first line. Test integrated with slight modifications
(to avoid dependency on File::Temp and others) (CPAN#14871)
+ applied http://public.activestate.com/cgi-bin/perlbrowse?patch=25588
(thanks H.Merijn Brand and Rafael Garcia-Suarez)
Neverending story...
05-Sep-2005 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.33
+ CPAN#14194: I<> in Pod::Usage overridden to just show the text, no ** around
+ CPAN#14195: wrong exit value for pod2usage(0)
+ CPAN#14315: allow for arbitrary URLs
I hope this will do now - Pod-Parser is DEAD!
15-Jun-2005 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.32
+ applied patch by radek at pld-linux dot org that fixes a regression of
broken support of Pod::Parser input from objects (CPAN#13203)
01-Jun-2005 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.31
+ applied patch suggested by ITUB AT cpan.org (remove spurious setting of
$_), which significantly reduces runtime (CPAN#12327)
+ fixed regression in podselect.PL and pod2usage.PL reported by Steve Peters
steve AT fisharerojo.org; no change in the actual code, just the build
script; the fix in Pod::Usage was already in
+ downgraded error about nested styles (e.g. C<...C<...>...>) to a warning
(CPAN#12240)
+ added the brackets to gensym() to make use strict happy in Perls < 5.006
(CPAN#5613)
+ pod2usage() is more tolerant wrt. =head1 SYNOPSIS\s* (CPAN#6329)
+ require at least File::Spec 0.82 as suggested in CPAN#8709
+ include the -noperldoc option in Pod::Usage as suggested in CPAN#11525
This is the last time an enhancement was implemented! >:->
+ fixed the test t/pod/find.t to not depend on perlfunc (CPAN#6679);
now the test also uses t/pod/testpods/lib/Pod/Stuff.pm;
this implicitely fixes also CPAN#8742
+ slightly updated META.yml
+ made sure that CPAN#7486 is _really_ integrated
+ make -quiet DWIM in Pod::Checker (CPAN#11884)
12-Mar-2005 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.30
+ changed dist name to Pod-Parser
+ pushed versions of .pm files to 1.30 as far as CPAN permits, i.e. don't
decrease existing versions > 1.30
+ added end of support announcement
+ cross-checked this version with the Perl5 core version and merged a
couple of changes
08-Feb-2005 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.29 - not released
+ integrated patch by tony at irational dot org to support printing of
custom sections in Pod::Usage
+ integrate change 22886 on Pod::Find (Rafael Garcia-Suarez and
Alan Burlison): Pod::Find should ignore SCM files and dirs
+ integrate a patch by Russ Allbery rra at stanford dot edu to support
Pod::Usage together with Pod::Text based on Pod::Simple or Pod::Parser
+ integrated #23327 (CPAN#7486) (fix warnings with NOEXIT)
+ integrated patch by Radoslaw Zielinski radek at karnet dot pl that
allows to specify IO::String objects as output file handles
08-May-2004 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.28
+ bumped version of ParseUtils to make CPAN indexer happy
08-May-2004 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.27
+ reviewed a bunch of rather old emails and verified that all that is in
+ added patch by Michael G Schwern schwernATpobox.com to suppress spurious
warning about / and | in L<> hyperlinks
24-Nov-2003 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.26
+ bumped version of Pod::Parser on request by Jarkko Hietaniemi
+ included a patch by Peter Prymmer PPrymmerATfactset.com to fix
the expansion of the scripts on VMS
+ included fix to support PodParser as core module from 5.6.0 on
(Autrijus Tang autrijusATautrijus.org)
+ updated README and other files to reflect change in maintenance,
in consequence updated Pod::PlainText and some t/...xr
27-Aug-2003 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.25 - not released
+ Merged bleadperl-5.8.1 into this distribution. Added a couple of
if($ENV{PERL_CORE}) statements to ease the maintenance of core/module.
26-Aug-2003 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.24
+ removed the "BETA STAGE" from Pod::Checker - it is now stable
+ added patch by Micheal Schwern schwernATpobox.com to silence Pod::Checker
(the module) and let podchecker (the script) print the diagnostics. Added
note in the Pod::Checker documentation.
+ Tom Wyant twyant4ATcomcast.net reported that Cygwin also has the
core pods in pods/ - fixed in Pod::Find
+ changed the logic in Pod::InputObjects a bit to speed up the parser,
based on a suggestion by Mark Jason Dominus mjdATplover.com. The
original proposal was however too much of a revolution to the existing
behaviour.
+ Some minor performance improvements in Pod::Parser (profile analysis)
12-Jun-2003 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.23
+ fixed a bug in Usage.pm, spotted by Kees Cook keesATosdl.org:
the special value 'NOEXIT' has not been treated appropriately
+ added INSTALLDIRS=perl as suggested by M. Schwern
23-Apr-2003 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.22
+ fixed a bug in Usage.pm, spotted by Harry Felder harryATrentec.com:
the path to perldoc is $Config{scriptdir}, not (always) $Config{bin}
07-Nov-2002 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.21
+ fixed a bug in the find.t test
+ make test work ok on MacOS/darwin, which strangely enough has its
perlfunc.pod in a "pods" directory, rather than "pod"
31-Oct-2002 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.20
+ Merged changes of perl-5.8.0 core back into this distribution:
- MacOS specific changes
- english orthography corrections
- adaptations to perlpodspec (e.g. =over does not require argument)
+ Adapt the link text to perlpodspec (drop extra text like
`elsewhere in this document', `the ... manpage' etc.)
+ Allow dashes in Pod hyperlinks, e.g. L<Inline::C-Cookbook>
(on request by Slaven Rezic and Mark Overmeer)
29-Aug-2002 Marek Rouchal <marekr@cpan.org>
-----------------------------------------------------------------------------
Version 1.19
+ Changed t/pod/testp2pt.pl to always choose Pod::PlainText for the tests,
do not rely on Pod::Text, which is not included in this package
(as suggested by Richard Clamp <richardc@unixbeard.net>)
+ Fixed spurious warning in Pod::ParseUtils reported by Rafael Garcia-Suarez
<rgarciasuarez@free.fr>: Inside "" the characters | and / are ok
+ Added a num_warnings method to Pod::Checker - requested by
brian d foy <comdog@panix.com>
+ Added a warning if =head2 comes before a =head1 - one TODO item less!
01-Sep-2000 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.18
+ Fixed error in failing recognize empty C<< >> sequences
+ Modified pod2usage to use perldoc if ultra-verbose mode is set
and input is a filename and output is STDOUT (so now it doesnt just
print the manpage, it pretty prints it and paginates it)
+ Allowed -exitval => NOEXIT to be given to pod2usage to instruct it
NOT to exit the running script.
+ Applied VMS patches from Tim Jennes to t/pod/find.t and lib/Pod/Find.pm
25-Jul-2000 Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
-----------------------------------------------------------------------------
Version 1.17
+ included small fixes by Tim Jenness <t.jenness@jach.hawaii.edu> to
Pod::Find and t/pod/find.t
+ extended logic in Pod::Find to search for pod/ subdirectories in all
given subdirectories (in pod_where function) to find e.g. "perlfunc".
Thus pod_where could be used by perldoc.
+ added check for recent File::Spec version in Makefile.PL
+ updated Makefile.PL, CHANGES, README
07-Jul-2000 Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
-----------------------------------------------------------------------------
Version 1.16
+ included two subs suggested by Tim Jenness <t.jenness@jach.hawaii.edu>
in Pod::Find (pod_where and contains_pod) and included a test in
t/pod/find.t
+ updated Makefile.PL, CHANGES and TODO
03-Jul-2000 Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
-----------------------------------------------------------------------------
Version 1.15
+ introduced -quiet option for Pod::Checker to suppress diagnostic
output when Pod::Checker is used to eat POD and output text.
+ improved documentation in Pod::Checker
+ improved code coverage of t/pod/poderrs.t
+ updated TODO
04-Jun-2000 Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
-----------------------------------------------------------------------------
Version 1.14
+ fixed wrong value in Pod::Parser concerning whitespace lines
+ added check in podchecker whether argument is a directory
+ introduce additional warning level: this suppresses the complaints
about unescaped <>, but the check is enabled when the wrning level is
increased: podchecker -warn -warn
adapted documentation appropriately
+ Pod::Hyperlink now parses L<open(2)> again, but gives a warning. The
calling programs have to check themselves for what to do with pages
like open(2).
+ Changed POD of several modules so that they conform to podchecker :-)
14-Mar-2000 Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
16-Mar-2000 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.13
+ Improved support of Win32 and OS/2 platforms by using File::Spec in
Pod::Find
+ strip .bat and .cmd on Win32 and OS/2, respectively
+ removed all tabs from Pod::Find and reviewed POD documentation
+ finally fixed t/pod/ptestpchk.pl to ignore any and all non-word-chars
in pathnames. No more special casing filenames for MacOS, NT, VMS, etc
just for the sake of passing the t/pod/poderrs.t test!
11-Mar-2000 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.12
+ Sync-up with patches from the 5.6 core distribution
+ Require perl5.005 instead of 5.004 now that 5.6 is almost out
+ Removed the t/pod/xtra tests from the distribution
+ Ignore [\n\r] when looking for non-empty blank lines in Pod::Parser
+ Added VMS file-unixification to test scripts
23-Feb-2000 Brad Appleton <bradapp@enteract.com>
Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
-----------------------------------------------------------------------------
Version 1.11
+ Fixed Pod::Parser warnings about non-empty blank lines in code
+ added note about extraction capabilities of Pod::Checker to README
+ added collection of index entries X<...> (Pod::Checker)
+ extended internal hyperlink node uniqueness check (Pod::Checker)
+ added documentation in Pod::Checker for built-in methods
(nodes, hyperlinks, X<...> entries)
+ minor cleanups (find_node in Pod::Cache::Item) and changed priority
in parsing L<...> (Pod::ParseUtils)
22-Feb-2000 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.10
+ bump up the version number to avoid confusion with a short-lived
version of 1.093-beta
21-Feb-2000 Brad Appleton <bradapp@enteract.com>
Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
-----------------------------------------------------------------------------
Version 1.093
+ Pod::Parser now warns about non-empty blank lines matching /^\s+$/
+ got rid of special handling of '=>' and '=>' inside C<..> and instead
implemented the more general rules posted by Larry Wall on P5P allowing
/[A-Z]<...>/ and /[A-Z]<[<:]\s+...\s+[:>]>/ to deal with things like
embedded '->' and '=>' using whitespace, as in: C<< <=> >> and I<< <> >>.
+ added proposals by Wolfgang Laun to Pod::Checker (more errors and
warnings):
- removed qr// so that code runs with Perl 5.004
- POD files can include '.' in the name.
- L<DBI(3)> now causes an error, correct is: L<DBI>
03-Jan-2000 Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
-----------------------------------------------------------------------------
Version 1.092
+ added the Pod::Cache and Pod::Cache::Item code to Pod::ParseUtils.
+ modified the README file.
15-Dec-1999 Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
-----------------------------------------------------------------------------
Version 1.091
+ cleaned up Pod::Checker, especially documentation, updated test
+ moved helper code to new module Pod::ParseUtils, added documentation
+ added Pod::Find, along with a test
22-Oct-1999 Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
-----------------------------------------------------------------------------
Version 1.090
+ Added several additional checks to Pod::Checker
+ Pod::Checker detects files with no POD
+ Pod::Checker prints warnings about inproper style
+ Modified podchecker to use the -warnings option and the "empty POD"
status
+ Added Pod::Hyperlink (internal in Pod::Checker for now) that parses
the L<> sequence into alttext, page and section
+ Updated documentation
+ Started adding callbacks so that Pod::Checker can be used also for
single-pass POD translators in the future
25-Sep-1999 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.085
+ Added a section on tree-based parsing to the PODs for Pod::Parser
+ Added '-expand_text" callback-option to Pod::Parser::parse_text()
+ Added ability to specify contents for Pod::InteriorSequence::new
+ Added the notion of "parse-options" to enable/disable certain
parsing behaviors (see the section on "PARSING OPTIONS"
in the documentation for Pod::Parser)
+ Added Pod::Parser::parseopts()
+ Added the '-want_nonPODs' parse-option
+ Added the '-process_cut_cmd' parse-option
+ Fixed the '*child2parent*' functions in InputObjects so that they
dont invoke "can" or "isa" for unblessed scalar-refs.
03-Sep-1999 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.084
+ Added Russ Allbery's Pod::PlainText re-write
+ Added some tests contributed by Russ Allbery
+ Fixed Makefile.PL to install the supplied scripts
+ Updated copyright messages
+ Added an error/warning callback function to Pod::Parser. When specified,
it will call the user-provided function instead of "warn" when printing
error messages (This makes it easier for things like Pod::Checker to
capture and/or redirect error output). See Pod::Parser::errorsub().
28-Jun-1999 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.083
+ Fixed problem with not defaulting to STDIN in parse_from_filehandle
(thanks to Russ Allbery for the patch)
+ Fixed problem with != and -= (and <op>= in general) processing
inside of C<...> (thanks to Russ Allbery for this patch too)
28-Apr-1999 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.082
+ Fixed portability problems with Makefile.PL on MSWin32 systems
(thanks to Jan Dubois for showing how to do this!)
08-Apr-1999 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.081
+ Fixed warning message in Pod::Parser::parse_text when $expand_seq is undef.
+ Fixed another problem with ignoring the contents of an interior sequence
if it was nothing but ')' inside the angle brackets (e.g. C<0>).
+ Moved test files under t/ to t/pod, and added a subdirectory t/pod/xtra
for the extra tests that involve "included" files and processing its
own source (the "xtra" files are *not* part of what comes with the CORE
in Perl 5.006)
+ Munged the Makefile.PL to be able to set TEST_FILES to t/pod/*.t and
t/pod/xtra/*.t (if it exists). This requires File::Spec so now you
need either File::Spec or Perl 5.005 or later to install this.
01-Mar-1999 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.08
+ Fixed a bug in obtaining options-hash in pod2usage()
+ Modified test suite & tools to run as expected on more platforms
(the .t scripts now do a zero-exit if $ENV{ACTIVE_HARNESS} is set)
+ Some more portability fixes for searching file-paths in Pod::Usage
(thanks to Chris Nandor)
+ Changed the distribution directory structure a little bit. Instead
of all the scripts and modules at the top level directory, the scripts
are now in the 'scripts/' subdirectory and the modules are now in the
'lib/Pod/' subdirectory.
16-Jan-1999 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.07
+ Added Pod::Checker and podchecker.PL
+ Fixed line-counting errors in Pod::Parser::parse_from_filehandle()
+ Added raw_text method for Pod::ParseTree
+ Documented optional hash-ref arg to Pod::Parser::parse_text and replaced
'-expand' with '-expand_seq' and '-expand_ptree'
+ parse_text now has sequences point to the parents they are nested inside
of as soon as they are created (instead of after they are appended to
the parent, which may occur *after* expansion)
+ Added the regression test-suite to the distribution in the t/ subdirectory.
Its not very exhaustive, but its a start.
+ Now uses File::Spec, which is bundled with perl 5.005 and later, but if
you have perl 5.004 you may need to download File::Spec from CPAN
09-Nov-1998 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.061
+ Minor additions to v1.06
* Pod::InteriorSequence::nested was buried inside POD directives.
I had to add the `=cut' between the subroutine docs and its code.
* Removed some of the documentation for things in Pod::Parser and
Pod::Input object that the user probably doesnt need to know.
* Split out "CHANGES" and "TODO" into separate files from the README
22-Oct-1998 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.06
+ SIGNIFICANT CHANGES (POSSIBLE BACKWARD INCOMPATIBILITIES)
* Pod::InputObjects::ParseTree object ADDED. This object corresponds
to a parse-tree of parsed pod paragraph text. Every node in the
parse-tree is either a text-string, or a Pod::InteriorSequence
that has yet to be expanded.
* Pod::Parser::parse_text ADDED!!! This routine parses some pod input
text and returns a parse-tree as the result. This is VERY useful for
people who cant rely on strict bottom-up expansion of interior
sequences. Now they can get the parse-tree and expand sequences
themselves in whatever order they require.
* Pod::Parser::interpolate PARAMETER CHANGE, it *no* *longer* takes a
regexp as its second parameter!!! It used to accept a regular
expression signifying the end of parsing conditions and pass it to
_interpolate_bottom_up. It now takes a line-number as the second
arg.
* Pod::Parser::_interpolate_bottom_up has been *REMOVED*!! Pod::Parser
no longer uses a recursive routine to parse interior sequences.
* The following Pod::Parser subroutines now take the current line-number
as an ADDITIONAL PARAMETER: command, textblock, verbatim, interpolate,
preprocess_line, preprocess_paragraph, parse_paragraph.
* REMOVED the Pod::Parser::total_lines method
* ADDED the nested() method to Pod::InteriorSequence
* REMOVED the following methods from Pod::InputSource: num_lines,
file_line, and ADDED the method filename instead.
* REMOVED the _CMD_SEQUENCES data-field and sequences() method from
Pod::Parser. If you need to know the parent of a nested interior
sequence, then invoke the nested() method of that sequence.
+ OTHER CHANGES
- Added the "-pathlist" options to Pod::Usage and pod2usage
- Made Pod::Usage a tad more portable for DOS and MSWin32
- Got rid of a rogue '#' in podselect that was in front of a needed
"use" statement.
- Fixed a bug in Pod::Parser::_interpolate_bottom_up that made it stop
interpolating interior sequences after the first line of a paragraph.
12-Feb-1998 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.05
- Fixed a bug in Pod::Usage (it was using an obsolete name to access an
attribute instead of using the new access method).
- Removed the use of $`, $&, and $' throughout all modules in this package.
Version 1.04
22-Dec-1997 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.04
+ SIGNIFICANT CHANGES
* Created a Pod/InputObjects.pm and moved the details of input streams
and interior sequences into appropriately named objects defined
in this file.
* Pod::PlainText now handles =for and =begin/=end
* Added the curr_headings() method to Pod::Select
* Fixed a few very simple but very stupid errors with improper version
numbers in the .pm files.
* Pod::PlainText now inherits from Pod::Select (instead of Pod::Parser)
because it needs to use the curr_headings() method.
24-Sep-1997 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.03 (major revision)
+ SIGNIFICANT CHANGES
* If a POD directive begins with '==' instead of '=', then that line
is considered a paragraph by itself (you dont need a blank line
before you begin the next paragraph). NOTE that this only works
for the *beginning* of a paragraph!! If the '==' begins a line
in the *middle* of a paragraph, then it receives no special treatment
and is not considered to be the beginning of a new POD directive.
If this added convenience seems confusing at first, just remember the
following phrases:
"LESS IS MORE" -- LESS equals signs need MORE newlines!
"MORE IS LESS" -- MORE equals signs need LESS newlines!
As long as you dont forget that the '=' on a POD directive always
comes *before* the newline that ends the paragraph (so the '=' is
associated with the first word of each phrase) you should be fine.
* The '=pod' command *IS* *NOW* *PASSED* TO Pod::Parser::command()!
* ALL INSTANCE DATA FIELDS HAVE BEEN RENAMED! Rather than using the new
field names, you should use the newly provided field access methods to
get/set private instance data. These are as follows:
Accessor Method Old Field Name
------------------- -------------------
cutting() CUTTING
output_file() OUTFILE
output_handle() OUTPUT
input_file() INFILE
input_handle() INPUT
total_lines() LINE
total_paragraphs() PARAGRAPH
input_streams() INPUT_STACK
top_stream() INPUT_TOP
sequence_commands() SEQUENCES
* The last parameter passed to the command() and interior_sequence()
methods has changed. Please see the documentation!
* The stack of interior sequences being processed is NO LONGER an
array of text-strings. It is now an array of hash-refs!
* Renamed my version of Pod::Text to Pod::PlainText to avoid some nasty
problems it caused for CPAN.
* The method Pod::Parser::interpolate() NO LONGER MODIFIES its first
argument (which means the argument doesnt have to be an l-value)!
This method is now a wrapper which invokes the new method named
_interpolate_bottom_up(). This new method *is* recursive and *does*
modify its first argument.
* _interpolate_bottom_up() contains a small but ugly *hack* to allow
'->' and '=>' to remain untouched inside of C<...> (without having
to use the E<gt> escape sequence) PROVIDED THAT there is something
to the left of it OTHER THAN another '-' or '='.
* The 'select()' and 'want_section()' methods have moved from Pod::Parser
into Pod::Select.
* All callback and callback-related methods have moved into the new
module Pod:::Callbacks (which is NOT YET FINISHED for this release).
22-May-1997 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.02
- Added the ability to register callbacks for =xxxx paragraphs and other
paragraphs. This means that one could (for example) register a temporary
callback after =item is seen to handle the very next paragraph and then
unregister itself. The methods added were add_callbacks and rm_callbacks.
Also, a private method invoke_callbacks was added to go about the business
of invoking callbacks. The callback mechanism Ive implemented is extremely
flexible and also way more complex than Id like (and hence requires lots
more documentation than I would like). Also, the interfaces to add_callbacks
and rm_callbacks tries to be very flexible in the number and type of
arguments you can give it. This is probably too flexible to the point
of being too difficult to figure out how to use. My callback mechanism
is very powerful but I think the interface to it is lousy and far too
complex. I am desperately in search of a way to make it smaller and
simpler without removing too much functionality. If you have any ideas
about how to do this PLEASE SHARE THEM WITH ME!
- Got rid of =pod pragmas. P5P has decided to use =for, and =begin/=end
instead and Ill just handle those like regular commands. NOTE THAT THIS
MEANS THE command() METHOD SHOULD NOW EXPECT TO BE PASSED =pod COMMANDS.
- Expanded the documentation for Pod::Usage to be (hopefully) a little less
confusing regarding the various different invocation styles. Many thanks
to Steven McDougall <swmcd@world.std.com> for spending many hours of
assistance toward this goal.
- Fixed Pod::Text to use the proper indentation for nested '=item' lists
and to handle consecutive =item paragraphs. (Thank you to Diab Jerious
<djerius@cfa.harvard.edu> for helping me with this one.)
- Fixed a bug in Pod::Parser that was causing the argument to =over to be
a newline instead of the empty string when no "over count" was given.
05-Sep-1996 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.01
- Commented out "use diagnostics" in all modules
- Made use of "use vars"
- Added the instance variables $self->{INPUT_STACK} and $self->{INPUT_TOP}
to Pod::Parser and made it possible to use the parse_from_file() and
parse_from_filehandle methods() to process "included" files (in addition
to normal pods that dont "include" other files).
- Added MSG option/key to pod2usage().
19-Aug-1996 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Version 1.00 (first "official" release):
- Renamed Pod::Filter to Pod::Parser at Kenneth Albanowski's recommendation.
- Moved podselect() into its own separate module Pod::Select to avoid
unnecessary namespace pollution in Pod::Parser.
- Renamed several methods and added another preprocessing method in
Parser.pm.
- Pod::Parser now keeps track of the current line and paragraph number
and the current input and output file names.
- Fixed parse_from_filehandle() to recognize a line matching /^\s+$/ as a
paragraph terminator.
- Included Pod::Usage and Pod::Text as part of the PodParser distribution
rather then packing and releasing each module separately.
- Removed pod2text.PL and added pod2usage.PL
07-Aug-1996 Brad Appleton <bradapp@enteract.com>
-----------------------------------------------------------------------------
Initial release of version 0.01 to garner some feedback. This release was
actually three separate "initial" releases of Pod::Parser, Pod::Text, and
Pod::Usage which were originally named Pod::Filter, Pod::PlainText, and
Pod::Usage (respectively).