1.01
- Released at 2024-11-18T20:46:04+0900
- fix: `perlbrew install skaji-relocatable-perl-$version` on macOS.
1.00
- Released at 2024-10-04T10:48:40+0900
- Experimental: `perlbrew install` now accept names like skaji-relocatable-perl-$version.
0.99
- Released at 2024-09-07T16:30:28+0900
- Thanks to our contributors: Graham Knop, Joelle Maslak, Luke Closs, jonasbn
- bashrc executes properly in bash shells with +h option set
- Allow specification of non-standard Perl location
- make-pp now requires the input to be specified with `-i` or `--input`.
- Tests are ported to Test2. Big thanks to Luke Closs.
- Command make-pp now expects the input to be the path of an existing executable perl program, and would not be searching through $PATH.
0.98
- Released at 2023-08-11T22:54:38+0900
- Remove the support of cperl from `available` and `install` command. Github PR: #777. cperl can still be installed by specifying the tarball, just not by their short names.
- new command: make-shim
- new command: make-pp.
0.97
- Released at 2023-05-12T22:33:42+0900
- Thanks to our contributors: Elvin Aslanov, Graham Knop, Shoichi Kaji, Tomasz Konojacki, brian greenfield
- The documentation of `clone-module` and `list-modules` are improved.
- No longer depends on Pod::Parser. Github PR #760
- Bugfix for csh users: Github PR #770
0.96
- Released at 2022-07-31T15:42:39+0900
- Thanks to our contributors: Rolf Stöckli
- `install-cpm` is now properly documented. Thanks to Tekki.
- Let `install` hint for `init` when PERLBREW_ROOT does not exist. .RT #57669.
- Reveal the actual error code of curl/wget etc. Github issue #748.
0.95
- Released at 2022-05-15T22:59:11+0800
- Thanks to our contributors: Leon Timmermans
- Now we use metacpan api for fetching perl versions and for downloading. Github PR #743
- `--verbose` flag now also enable verbosity of underlying curl/wget commands. Github PR #740.
- Avoid perl test errors when NO_COLOR is set. Github PR #738
0.94
- Released at 2021-12-05T08:39:16+0900
- Let `self-upgrade` print version numbers when doing upgrades. Github issue #678.
0.93
- Released at 2021-11-22T23:09:25+0900
- Let `clone-modules` takes just one arguments and mean 'cloning modules from that perl'.
- Let `list-modules` and `clone-modules` map certain output to their representative module name. Github issue #722
- `exec` command now takes aliases explicitly specified in `--with` args and run commands with those aliases -- even if that would run the same thing twice. Github issue #725
0.92
- Released at 2021-04-15T23:53:55+0900
- Thanks to our contributors: chee
- Fix a message mentioning fish config. GitHub PR #712
- Fetch cperl releases from https://github.com/perl11/cperl/releases instead
- Let `clone-modules` command accept `--notest` and skip running module tests
0.91
- Released at 2021-01-31T17:10:27+0900
- Fix META info included in 0.90. No other feature changes.
0.90
- Released at 2021-01-29T09:43:17+0900
- Thanks to our contributors: Mose Schmiedel, gucchisk
- The output of 'available' command is split into sections of different type of distributions. Github issue #646.
- Let the output of `perlbrew -h` be the short usage. Github issue #647
- Unbreak env script for fish users. GitHub PR #698 and #708
- Prefer https URLs of www.cpan.org
0.89
- Released at 2020-10-19T09:26:19+0900
- Thanks to our contributors: Håkon Hægland, Nicolas R, Peter Tripp
- Make the bashrc compatible with 'bash -u'. Github PR #694
- Prevent build directory from being overwritten. Github PR #683
0.88
- Released at 2020-01-29T21:40:07+0900
- Thanks to our contributors: Dave Rolsky, Gil Magno, Zhu Sheng Li
- `install` command now shows errors message from http_downlod. Github PR #681.
- Fix: The .tar.bz2 suffix are removed from the output ouf `available` PR #685
0.87
- Released at 2019-10-25T22:55:40+0900
- Thanks to our contributors: Branislav Zahradník, Christopher Chavez, Jon Jacobson, Konstantin S. Uvarin, Pali, Shoichi Kaji, Tomasz Konojacki, jkjacobson, rage311
- Use the new official repo url for fetching perl blead. Github issue #677
- Add `--min` and `--max` options to `exec` command. Github PR #656
- Fix "ERROR: Cannot find the tarball for perl-$version". Github PR #669
- Fix calling patchperl on readonly files. Github PR #674
- Fix installation from local tarbal files. See https://rt.cpan.org/Ticket/Display.html?id=129871
- Internal refactoring. Github PR #667, #662
- Various corrections of documentation. Github PR #676, #660
0.86
- Released at 2019-01-19T09:39:55+0900
- Thanks to our contributors: Olaf Alders, Paul Cochrane
- Fix an error from 'install' command. https://rt.cpan.org/Public/Bug/Display.html?id=128083
- Tweak the separater characters of 'exec' command: See https://github.com/gugod/App-perlbrew/issues/648
0.85
- Released at 2018-12-15T23:24:15+0900
- Thanks to our contributors: Branislav Zahradník, Guido Flohr, Joelle Maslak, Luca Ferrari, rage311
- Fix the behaviour of 'clone-modules'
- Various internal refactoring
0.84
- Released at 2018-06-24T08:26:14+0900
- Thanks to our contributors: Joelle Maslak
- Unbreak 'available' command after some updates from cpan.org web site.
- Unbreak the installation -- which missed "perlbrew" command due to a mistake when using mbtiny.
0.83
- Released at 2018-05-30T08:04:43+0900
- Thanks to our contributors: Alceu Rodrigues de Freitas Junior, Dan Book, Luca Ferrari, María Inés Parnisari, Mohammad S Anwar, Shoichi Kaji, sylints
- my respect to search.cpan.org
- MAKE env var can now be used to specify the "make" program.
- New command: install-cpm
- "install" command now has a "--builddir" option for specifying a work directory
- "list" command now takes "--verbose" option.
- "clone-modules" command is now better documented.
0.82
- Released at 2017-12-17T09:53:00+0900
- Thanks to our contributors: Alceu Rodrigues de Freitas Junior, Paul Cochrane
- Fix regression of 'perlbrew install blead'
0.81
- Released at 2017-12-09T15:12:04+0900
- Thanks to our contributors: Luca Ferrari, Zac Bentley, perlancar, Nicolas R, gregor herrmann, Paul Cochrane
- New command: clone-modules
- Recognize tarball in .tar.xz extension
- The output of "availables" is now sorted by versions
- Unbreak the integration with cperl releases
- Make `perlbrew install` runs correctly on AIX
- support the current perl blead (5.28)
0.80
- Released at 2017-06-30T07:40:45+0200
- Fix version in META.yml in CPAN distribution. See: https://rt.cpan.org/Public/Bug/Display.html?id=122279
0.79
- Released at 2017-06-25T23:40:45+0200
- deal with perl-5.26 change about @INC in Makefile.PL
- "available" command now also shows the URLs
0.78
- Released at 2016-11-20T22:59:55+0100
- Thanks to our contributors: Manuel Streuhofer, Sergey Aleynikov
- More fixes to accomodate changes on perl5.git.perl.org
0.77
- Released at 2016-11-12T06:42:45+0100
- Thanks to our contributors: Dennis Kaarsemaker, Roel Harbers
- The "uninstall" command now requires confirmation.
- Fix bug with csh when PATH entries contain spaces
- Accommodate git commit abbrivation changes on perl5.git.perl.org. See GH #524 https://github.com/gugod/App-perlbrew/pull/524
0.76
- Released at 2016-06-21T23:02:44+0200
- Start supporting cperl installation.
- cperl releases are sourced from: https://github.com/perl11/cperl/releases
- Deal with a regex warning when testing perlbrew with perl-5.25. See RT: https://rt.cpan.org/Ticket/Display.html?id=114871
0.75
- Released at 2016-03-16T23:41:41+0100
- Thanks to our contributors: Dave Cross, Dean Hamstead, Mark J. Reed, Mohammed El-Afifi,
- Add '--no-patchperl' install option for skip running patchperl.
- Add '--destdir' install option.
- "uninstall" command now also delete associated libs.
- "mirror" command is removed.
- "config" command is removed.
0.74
- Released at 2015-11-24T20:55:02+0100
- A big thanks for our contributers: Aristotle Pagaltzis, Dave Jacoby, Dylan Cali, John Krull, Kevin Johnson, Nathan Day, Paul Cochrane, Tudor Constantin, Yanick Champoux, tm604
- support PERLBREW_LIB_PREFIX. https://github.com/gugod/App-perlbrew/commit/c29813cd4633683bd049964178a9ac96647986bc
- prefer https and remove insecure download cli flags. https://github.com/gugod/App-perlbrew/commit/f49a908c1702942006de4654107edf77a48ead52
- perlbrew now dies when switching to/use a lib that does not exist. https://github.com/gugod/App-perlbrew/issues/432
- RHEL vendorlib fix https://github.com/gugod/App-perlbrew/issues/409
- improvements with fish integration.
- unbreak when running with perl 5.14 or earlier: "list" command now correctly display lib names.
- retaining flags in upgrade-perl. https://github.com/gugod/App-perlbrew/commit/b8d466670bbfc8e214a9d3ff2e889a4860060d84
- variour document clean up and improvements.
0.73
- Released at 2015-02-01T09:59:45+0100
- fixes and improvements from Manuel Streuhofer, Aristotle Pagaltzis, Sebastian Willert, David Hand, Eric Enns,
Peter Roberts, Thomas Sibley, Ivan Baidakou, thanks!
- fix 'perlbrew user' for fish users https://github.com/gugod/App-perlbrew/pull/429
- fix sub-shell for bash users https://github.com/gugod/App-perlbrew/pull/435
- clarify the 'perlbrew use' output: https://github.com/gugod/App-perlbrew/issues/439
0.72
- Released at 2014-10-27T21:38:19+0100
- Fix 0.71 breakage on MacOSX when the shell is bash or zsh
- Fix spelling mistake. by @gregoa++
0.71
- Released at 2014-09-13T19:59:15+0200
- Fix a few bugs of having unwanted values in PERL5LIB when switching between libs
0.70
- Released at 2014-09-02T20:41:15+0900
- download the fatpacked perlbrew from an http:// url.
- protect fatpacked perlbrew from PERL5LIB, thanks to dagolden++
- avoid several warnings, thanks to DabeDotCom++
- making perlbrew a bit friendlier to init.d script, thanks to maxhq++ . see also https://github.com/gugod/App-perlbrew/pull/404
- make it possible to override PERLBREWURL before invoking installers
0.69
- Released at 2014-06-10T23:32:05+0200
- fix 'perlbrew env' breakage by just avoiding bad local::lib versions.
0.68
- Released at 2014-06-07T15:08:00+0200
- disable SSL cert checks. GH #385.
- "perlbrew download stable" works as on expects. GH #383
- Many fish shell fixes. GH #376 #378 #379
- make 5.21 installable. GH #396
- various documentation fixes.
0.67
- Released at 2013-11-20T08:40:52+0100
- Support fish shell. Thanks to @yenzie++
- `info` command now takes an optional module name and show information for it. Thanks to @trcjr++
- doc/bug fixes from @mmcclimon++, @mperry2++, and markstos++
0.66
- Released at 2013-08-03T00:22:29+0200
- fix a bug the made download failed with curl program.
0.65
- Released at 2013-08-01T07:19:03+0200
- exec command: error hadndling improvements. Thanks to @vsespb.
- install command: add "--clang" option. Thanks to @salva
- various bug fixes. thanks to @ironcamel and @gottreu
0.64
- Released at 2013-06-02T09:44:59+0200
- The build directory is removed before a new build.
- New command: `install-multiple`
- `clean` command now also removes tarballs
- `install` command has many extra convienent flags.
- Use "http://www.cpan.org" as the default CPAN mirror instead of "http://search.cpan.org/CPAN"
- Remove the --insecure/--no-check-certificate command bflags when invoking curl/wget.
0.63
- Released at 2013-05-06T16:53:48+0200
- Remove `install-ack` command.
- Due to the new architecture of ack2, it does not make sense
to install the standalone executable anymore. Thus it's better not
to do the installation with perlbrew.
- Fix the `use` and `switch` command when switching between binary incompatible perl installations. See GH #297
0.62
- Released at 2013-04-07T17:43:58+0800
- Fix `list-modules` under lib env. It lists all modules in the lib, and in the base.
- Use the original grep command to prevent aliases from breaking the content of init. GH #307
- `perlbrew alias help` is now the same as `perlbrew help alias`
- `perlbrew exec --with ...` now preserve the order of specified names.
0.61
- Fix bashrc on various OS/shell. See GH #302
0.60
- Released at 2013-03-17T21:44:12+0100
- Exit status handling in bash function. See ed29288ab50a15d7df86d69cfcbddf108674eb07 for more details.
- Fix compatibility with recent local::lib version.
- Delay the loading of server modules.
- Fix warnings when runing `perlbrew off`
0.59
- Released at 2013-02-17T12:34:10+0100
- New feature: "perlbrew install --switch $perl"
- New feature: "perlbrew install stable"
- Fix "--quiet" options for "exec" command
- Fix mulitple test failures and warnings
0.58
- Released at 2012-11-16T08:45:18+0100
- Fix infinite re-exec loop as identified in #263
- Fix a case where PERL5LIB still contains previous entries after deactivating or activating other ones.
0.57
- Released at 2012-11-13T19:57:03+0100
- Fix an infinite re-exec loop
0.56
- Released at 2012-11-11T23:10:30+0100
- Fix GH #261, which breaks `off` and `swich-off` commands.
0.55
- Revert the requirement of 5.8.8. Now require 5.8
- Add PERLBREW_CPAN_MIRROR environment variable
- Deal with a minor local::lib path problem. See GH #254.
0.54
- Released at 2012-10-24T21:21:25+0200
- Now requires perl 5.8.8
- Fix an issue with list-module command listing extra modules See GH #245
- Tweak default Configure options for pre-5.6 versions
- Fix an issue with warning messagse in 'upgrade-perl' command.
0.53
- Released at 2012-10-14T17:41:17+0200
- New command: `info`.
- requires CPAN::Perl::Releases 0.76 for 5.14.3 info.
- Skip "." in @INC to deal with a `list-module` issue. GH #245.
- Environment variable cleanups and minor bashrc rewrite.
0.52
- Released at 2012-10-04T21:30:40+0200
- userelocatableinc is no longer default. Meanwhile PERLBREW_CONFIGURE_FLAGS can still be used.
- Fix GH #197 again. Also make sure perlbrew-unrelated PERL5LIB values are preserved.
- Fix an issue that MANPATH contains unwanted values even after switch/use/off.
0.51
- Released at 2012-09-29T09:17:14+0200
- Fix a start-up warning message from bashrc when perlbrew is not active
- Fix a breakage on CentOS due to the use of `manpath` command.
0.50
- Released at 2012-09-01T11:25:41+0200
- properly remove perlbrew-related PERL5LIB entries. GH #197
- minor documentation tweak.
0.49
- Released at 2012-08-25T22:32:22+0200
- Fix the build for perl-5.12 and 5.14 -- userelocatableinc are not working properly. https://github.com/gugod/App-perlbrew/issues/232
0.48
- Released at 2012-08-24T07:07:52+0200
- The build log output "build.log" is now named after the installation name for easier reference.
- Fix the invokation configure command to actually contains -Duserelocatableinc
- Experimental: bash/zsh users may put this to shell init instead: eval "$(~/perl5/perlbrew/bin/perlbrew init -)"
- A few output message updates
0.47
- Released at 2012-08-23T07:59:53+0200
- New command: download.
- New env var: PERLBREW_CONFIGURE_FLAGS
- userelocatableinc is enabled by default when the installing perl version is greater than or equals to 5.8.9. It should make some use cases easier. In particular, you can move PERLBREW_ROOT directory to another place.
- fix https://github.com/gugod/App-perlbrew/issues/216 for bash users and zsh users
0.46
- fix: The deprecation warning when running `self-upgrde`
- fix: system MANPATH detection
- improvement: Specifying multiple perl: `exec --with perl-5.14.2,perl-5.16.0`
0.45
- New command: install-ack . This install the standalone version of ack under $PERLBREW_ROOT/bin
- New command: list-modules
- `exec` command now also iterates thourgh all the libs
- Documented the `--with` argument of exec command. See `perlbrew help exec`
0.44
- Notice: "self-install" command now alters the shebang to use system perl
- Notice: "install-patchperl" command now alters the shebang to use system perl.
- some documentation tweaks
- fix: `perlbrew use` to/from a lib has not been working properly.
0.43
- cpantester-error fixes
- csh support. Big thanks to matzsoft.
- support 'fetch' command on FreeBSD.
- Fix a bug that perlbrew failed to resolve version number when dist path contain "perl5"
0.42
- Improvement: die when running perlbrew (use|switch) with unknown installation name.
- clean 'build.log' on install. ref: RT #69168.
0.41
- Fix installation issue when the specified version is not listed in CPAN::Perl::Releases
- Fix sub-shell invocation for 'switch' and 'use' command. This is particularly for csh users, but it should also work for bash users.
0.40
- Make the stanalone perlbrew program smaller by using Perl::Strip
- use CPAN::Perl::Releases to decide the location of perl tarball -- less HTTP hits
- Prefer $PERLBREW_ROOT/bin/patchperl if it is there.
0.39
- Fix GH #179. lib naming are more consistent.
- Fix GH #171. bash users are suggestted to upgrad to this version.
- Fix GH #152.
0.38
- fix deps
0.37
- fix ENV mess after switching to diffirent libs multiple times
- add --sitecustomize option
0.36
- fix test errors on freebsd that makes it uninstallable
0.35
- fixes for cpantester failures
- requiers local::lib version 1.008
0.34
- Fix: remove duplicated items from the output of `perlbrew list`.
- New Command: self-install.
- This is actually renamed from an undocumented command `install-perlbrew`
- Plus it gets documented.
- Provide aditional bash completion control helper commands.
- Documentation fixes / typo corrections.
- alter MANPATHs, see GH #173
- Allow the representation like '@lib' te mean "a lib name under current perl.". See GH #153
0.33
- Remove Text::Levenshtein from the standalone executable.
- Rearrange documentation so all perlbrew command usage document can be found in `perldoc perlbrew`
- In the future, App::perlbrew POD should only contain the API doc for the module.
0.32
- A hotfix release: local::lib was not bundled in the previous release.
0.31
- NOTICE: Remove $PERLBREW_ROOT/Conf.pm if it's there, and re-run `perlbrew mirror`
- perlbrew help system is changing. `perlbrew help <command>` now displays brief documentation for the command.
- Add a global `--root` argument for all commands that can be used as a quick alternative to set PERLBREW_ROOT env var.
- Avoid display paths to external/system perl in the output of `perlbrew list`
- Replace Text::Levenshtein with a minimal implementation -- the standalone executable get to be smaller.
0.30
- New command: lib
- local::lib integration is done with this command.
- New command: install-patchperl
- skip runs of 'exec' on aliases https://github.com/gugod/App-perlbrew/pull/135
- Respect -f flag when installing to replace an already installed perl.
- Redefine the default value of -q flag to be false, and define it's meaning to be "complete silent"
0.29
- The installer now honors $TMPDIR (RT #70850)
- Fixd GH #108. `perlbrew use` has a fallback for users that does not use bash/csh -compitable shell.
- Deprecate the command 'perlbrew use system' simply use 'perlbrew off' or 'perlbrew switch-off' instead.
- Deprecate the special case of `perlbrew use /path/to/bin/perl` and `perlbrew switch /path/to/bin/perl
- perlbrew no longer cast magic to external perls. But there will be an alternative.
0.28
- fixes for cpantester
- Fix 'switch' and 'use' for bash users, by Woody2143++
- The standalone `perlbrew` file is now packed with fatpacker, by running `dev-bin/build.sh`. `perl Makefile.PL` does no trigger a re-build anymore.
- Update the installer to grab patchperl 0.46
0.27
- Hotfix for `perlbrew install` command
0.26
- Fix GH #119
- Fix t/08.exit_status.t for cpantesters
- Fix several bugs in `exec` command
- Implement GH #103 - install -v shows build.log
- Add -Dusedevel when installing blead perl
0.25
- suggest when user types wrong commands. hoelzro++
- Improvements about self-upgrade by hoelzro++
- exit with non-zero status code when there's some sort of error. by punytan++
- Added verification of existing alias before attempting unalias. johncm++
- Fix `install-cpanm` for due to a recent github cert update. kanetann++
0.24
- Done GH #92 -- Show error messages on network errors.
- Fix GH #82 -- deduplicate items in PATH for the `list` command.
- Tests for various commands and methods.
0.23
- dependency fixes
- Fix auto-detection of curl
- Support OpenBSD pdksh. The provided bashrc should be compatible with pdksh.
- Small improvement of 'exec' command. `perlbrew exec perl -v` now works.
0.22
- Fix ccache support on Linux with bash.. GH #87.
- `install` command no longer clobbers existing installations.
- New commands: uninstall, alias, self-upgrade
- See more on http://perlbrew.pl/Release-0.22.html
0.21
- oylenshpeegul++ Let version numbers alone mean installation names. For example, 5.12.3 means perl-5.12.3
- audreyt++ fixed `perlbrew install <URL>` that might installs to a wrong path.
- Fix RT #68241
- Improve `perlbrew list` command output
- Improve `perlbrew install` command. Now it takes a local .tar.gz filename
- See more detail in http://perlbrew.pl/Release-0.21.html
0.20
- For more detail release note, see https://github.com/gugod/App-perlbrew/wiki/Relesae-0.20
- doherty++ FIX: stop when user specified an invalid perl version that cannot be found on cpan.
- doherty++ specialized version installation: perlbrew install perl-blead / <URL>
- am0c++ FIX: `perlbrew intsall /path/to/git/src/dir`
0.19
- Auto run 'perlbrew init' after an install (or upgrade)
- Symlink dev versions of executables. For example,'perl5.13.11' to 'perl', 'prove5.13.11' to 'prove'.
- Automatically apply patches necessary to make older perls build again on
modern platforms with the help of Devel::PatchPerl.
- A command "perlbrew available" to list recently available perls to build by trcjr
0.18
- Spotted and fixed by chad.a.davis++, an issue when bash set "noclobber" option,
which breaks the creation of ~/.perlbrew/init. See https://rt.cpan.org/Ticket/Display.html?id=66518
- A simple `perlbrew clean` command to clean build dir.
- delegate `-j` arg value to `make test_harness`. by dagolden++
- $HOME is replaced with "~" in many messages. https://rt.cpan.org/Ticket/Display.html?id=57668
0.17
- UPDATE NOTES: you need to init, off and switch back to the version you want;
- Fix "perlbrew use" to work even if we are switched to a specific version
- Fix "perlbrew env" to use current version, sets PERLBREW_PERL and proper PATH
- Feature: "perlbrew use" shows current version in use
- Feature: "perlbrew switch /path/to/special/perl name-of-special-perl" names for adhoc perl's
- 'perlbrew exec' now excludes those non-brewed perl by frankcuny++ according to the discussion here: https://github.com/gugod/App-perlbrew/pull/43
0.16
- Use 'test_harness' for perl >= 5.7.3. avar++
- Use gtar on Solaris - RT #61042. doherty++
- Fix "perlbrew -f switch" by dalinaum++
0.15
- DEPRECATE and REMOVE 'perlbrew installed' command.
- Intrudoce a 'perlbrew exec' command
- 'perlbrew use system' can be used to locally turn off perlbrew. yibe++
0.14
- DEPRECATE `get_current_perl` function. Use `current_perl` instead
- Show versions of non-perlbrew perls in the output of `perlbrew list`. Thanks to trcjr++
- bashrc fixes from yibe++
- Let help, -h and --help do the same thing -- showing full pod.
0.13
- 'installed' command is renamed to 'list', and will be deprecated soon.
- Requires curl or wget from now -- to fetch https URLs. polettix++
0.12
- Fix: missing init file generation.
0.11
- Avoid warning messages. Thanks Anno Siegel for the bug report and patch.
- `-A` arguments are passed thru, thanks to gfx++.
- Unbreak tests for older perls with older Test::Simple. Thanks to zaphod42++
- Better bash Integration, no more 'hash -r'
- New command for bash and zsh: 'perlbrew use'
- Deprecating 'installed'. use 'list' instead.
0.10
- Use File::Path::Tiny to avoid the api incompatibility of File::Path.
- yanick++ and castaway++ fixes docmentation
- gfx++ made it accept -Dopt style flags as Perl Configurate does.
- (Danijel Tasov)++ added '-n' option -- no test!
- xsawyerx++ fixes RT #57672, #60123, and GH #9
- Fixes #59729
0.09
- Use the proxy set in $ENV{http_proxy} if available.
- Bypasses '-U' option to to configure. Thanks to chromatic++
0.08
- Conf file + CPAN mirror support
- Strip invalid dependency lines out of the makefile in older perl versions, to make them work with newer gcc versions
- Add rudimentary pure-perl introspection, jrockway++
- Documentation, castaway++
0.07
- Document about PERLBREW_ROOT and the issue installing it with CPAN.
- Handle an edge case whn the tarball is not found on the http server. Thanks to sekimura++
- Improves 'switch' and 'off' command message. Thanks to Justin Davis.
- PERL5OPT PERL5LIB are removed while configuring and testing a new perl. Thanks to Andrew Rodland.
- fix a expression precedence bug. Thanks to Jesse Luehrs.
0.06
- Fix -as option. Thanks to doy++ and jasonmay++
0.05
- Now it brews from git. jasonmay++
- Fix the uses of mkpath on various versions of perls.
- Support the building of 5.13, and future developement versions
0.04
- Use File::Path::mkpath instead of make_path to make in runnable with older versions of Perl
- a few document typo fixes.
0.03
- Fixed a bug that switch fail after 'off'
0.02
- Officially prepare a standalone program for quick download.
- The 'installed' command now also lists all the 'perl' found in your PATH
- The 'switch' command can take an executable like /usr/bin/perl
- Various program options by Chris Prather
- Fixes from Tatsuhiko Miyagawa
0.01
- First release. Installs perl-5.11.[12345] on my mac.