NAME

PDL::Graphics::TriD -- PDL 3D interface

SYNOPSIS

use PDL::Graphics::TriD;

# After each graph, let the user rotate is and
# wait for him to press 'q', then make new graph
line3d($coords);       # $coords = (3,n,...)
line3d($coords,$colors);  # $colors = (3,n,...)
line3d([$x,$y,$z]);
imagrgb([$r,$g,$b]);
lattice3d([$x,$y,$z]); # 2-d piddles
points3d([$x,$y,$z]);

hold3d(); # the following graphs are on top of each other and the previous
line3d([$x,$y,$z]);
line3d([$x,$y,$z+1]);
$pic = grabpic3d(); # Returns the picture in a (3,$x,$y) float piddle (0..1).

release3d(); # the next graph will again wipe out things.

WARNING

These modules are still in a somewhat unfocused state: don't use them yet if you don't know how to make them work if they happen to do something strange.

DESCRIPTION

This module implements a generic 3D plotting interface for PDL. Points, lines and surfaces (among other objects) are supported.

With OpenGL, it is easy to manipulate the resulting 3D objects with the mouse in real time - this helps data visualization a lot.

With VRML, you can generate objects for everyone to see with e.g. Silicon Graphics' Cosmo Player. You can find out more about VRML at http://vrml.sgi.com/ or http://www.vrml.org/

SELECTING A DEVICE

The default device for TriD is currently OpenGL. You can specify a different device either in your program or in the environment variable PDL_3D_DEVICE. The one specified in the program takes priority.

The currently available devices are

GL: OpenGL
GLpic: OpenGL but off-line (pixmap) rendering and writing to a graphics file.
VRML: VRML objects rendering. This writes a VRML file describing the scene. This VRML file can then be read with a browser.

ONLINE AND OFFLINE VISUALIZATION

TriD offers both on- and off-line visualization. Currently the interface w.r.t. this division is still much in motion.

For OpenGL you can select either on- or off-line rendering. VRML is currently always offline (this may change later, if someone bothers to write the java(script) code to contact PDL and wait for the next PDL image over the network.

COORDINATE SPECIFICATIONS

Specifying a set of coordinates is generally a context-dependent operation. For a traditional 3D surface plot, you'll want two of the coordinates to have just the xvals and yvals of the piddle, respectively. For a line, you would generally want to have one coordinate held at zero and the other advancing.

This module tries to make a reasonable way of specifying the context while letting you do whatever you want by overriding the default interpretation.

The alternative syntaxes for specifying a set of coordinates (or colors) are

$piddle                             # MUST have 3 as first dim.
[$piddle]
[$piddle1,$piddle2]
[$piddle1,$piddle2,$piddle3]
[CONTEXT,$piddle]
[CONTEXT,$piddle1,$piddle2]
[CONTEXT,$piddle1,$piddle2,$piddle3]

where CONTEXT is a string describing in which context you wish these piddles to be interpreted. Each routine specifies a default context which is explained in the routines documentation. Context is usually used only to understand what the user wants when he/she specifies less than 3 piddles.

The following contexts are currently supported:

SURF2D: A 2-D lattice. [$piddle] is interpreted as the Z coordinate over a lattice over the first dimension. Equivalent to [$piddle->xvals, $piddle->yvals, $piddle].
POLAR2D: A 2-D polar coordinate system. [$piddle] is interpreted as the z coordinate over theta and r (theta = the first dimension of the piddle).
COLOR: A set of colors. [$piddle] is interpreted as grayscale color (equivalent to [$piddle,$piddle,$piddle]).
LINE: A line made of 1 or 2 coordinates. [$piddle] is interpreted as [$piddle->xvals,$piddle,0]. [$piddle1,$piddle2] is interpreted as [$piddle1,$piddle2,$piddle1->xvals].

What makes contexts useful is that if you want to plot points instead of the full surface you plotted with

imag3d([$zcoords]);

you don't need to start thinking about where to plot the points:

points3d([SURF2D,$zcoords]);

will do exactly the same.

SIMPLE ROUTINES

Because using the whole object-oriented interface for doing all your work might be cumbersome, the following shortcut routines are supported:

FUNCTIONS

line3d

3D line plot, defined by a variety of contexts.

line3d piddle(3,x), {OPTIONS}  
line3d [CONTEXT], {OPTIONS}

Example:

perldl> line3d [sqrt(rvals(zeroes(50,50))/2)]
- Lines on surface
perldl> line3d [$x,$y,$z]
- Lines over X, Y, Z
perldl> line3d $coords
- Lines over the 3D coordinates in $coords.

Note: line plots differ from mesh plots in that lines only go in one direction. If this is unclear try both!

See module documentation for more information on contexts and options

imag3d

3D rendered image plot, defined by a variety of contexts

imag3d piddle(3,x,y), {OPTIONS}  
imag3d [piddle,...], {OPTIONS}

Example:

perldl> imag3d [sqrt(rvals(zeroes(50,50))/2)], {{Lines=>0};

- Rendered image of surface

See module documentation for more information on contexts and options

mesh3d

3D mesh plot, defined by a variety of contexts

mesh3d piddle(3,x,y), {OPTIONS}  
mesh3d [piddle,...], {OPTIONS}

Example:

perldl> mesh3d [sqrt(rvals(zeroes(50,50))/2)]

- mesh of surface

Note: a mesh is defined by two sets of lines at right-angles (i.e. this is how is differs from line3d).

See module documentation for more information on contexts and options

lattice3d

alias for mesh3d

points3d

3D points plot, defined by a variety of contexts

points3d piddle(3), {OPTIONS}  
points3d [piddle,...], {OPTIONS}

Example:

perldl> points3d [sqrt(rvals(zeroes(50,50))/2)];
- points on surface

See module documentation for more information on contexts and options

imagrgb

2D TrueColor Image plot

imagrgb piddle(3,x,y), {OPTIONS}  
imagrgb [piddle,...], {OPTIONS}

This would be used to plot an image, specifying red, green and blue values at each point. Note: contexts are very useful here as there are many ways one might want to do this.

e.g.

perldl> $a=sqrt(rvals(zeroes(50,50))/2)                                            
perldl> imagrgb [0.5*sin(8*$a)+0.5,0.5*cos(8*$a)+0.5,0.5*cos(4*$a)+0.5]

imagrgb3d

2D TrueColor Image plot as an object inside a 3D space

imagrdb3d piddle(3,x,y), {OPTIONS}
imagrdb3d [piddle,...], {OPTIONS}

The piddle gives the colors. The option allowed is Points, which should give 4 3D coordinates for the corners of the polygon, either as a piddle or as array ref. The default is [[0,0,0],[1,0,0],[1,1,0],[0,1,0]].

e.g.

perldl> imagrgb3d $colors, {Points => [[0,0,0],[1,0,0],[1,0,1],[0,0,1]]};
- plot on XZ plane instead of XY.

grabpic3d

Grab a 3D image from the screen.

$pic = grabpic3d();

The returned piddle has dimensions (3,$x,$y) and is of type float (currently). XXX This should be altered later.

hold3d, release3d

Keep / don't keep the previous objects when plotting new 3D objects

hold3d();
release3d();

hold3d(1);
hold3d(0);

keeptwiddling3d, nokeeptwiddling3d

Wait / don't wait for 'q' after displaying a 3D image.

Usually, when showing 3D images, the user is given a chance to rotate it and then press 'q' for the next image. However, sometimes (for e.g. animation) this is undesirable and it is more desirable to just run one step of the event loop at a time.

keeptwiddling3d();
nokeeptwiddling3d();

keeptwiddling3d(1);
keeptwiddling3d(0);

When an image is added to the screen, keep twiddling it until user explicitly presses 'q'.

 keeptwiddling3d();
 imag3d(..);
 nokeeptwiddling3d();
 $o = imag3d($c);
 while(1) {
	$c .= nextfunc($c);
	$o->data_changed();
	twiddle3d();		# animate one step, then return.
 }

twiddle3d

Wait for the user to rotate the image in 3D space.

Let the user rotate the image in 3D space, either for one step or until (s)he presses 'q', depending on the 'keeptwiddling3d' setting. If 'keeptwiddling3d' is not set the routine returns immediately and indicates that a 'q' event was received by returning 1. If the only events received were mouse events, returns 0.

CONCEPTS

The key concepts (object types) of TriD are explained in the following:

Object

In this 3D abstraction, everything that you can "draw" without using indices is an Object. That is, if you have a surface, each vertex is not an object and neither is each segment of a long curve. The whole curve (or a set of curves) is the lowest level Object.

Transformations and groups of Objects are also Objects.

A Window is simply an Object that has subobjects.

Twiddling

Because there is no eventloop in Perl yet and because it would be hassleful to do otherwise, it is currently not possible to e.g. rotate objects with your mouse when the console is expecting input or the program is doing other things. Therefore, you need to explicitly say "$window->twiddle()" in order to display anything.

OBJECTS

The following types of objects are currently supported. Those that do not have a calling sequence described here should have their own manual pages.

There are objects that are not mentioned here; they are either internal to PDL3D or in rapidly changing states. If you use them, you do so at your own risk.

The syntax PDL::Graphics::TriD::Scale(x,y,z) here means that you create an object like

$a = new PDL::Graphics::TriD::Scale($x,$y,$z);

`PDL::Graphics::TriD::Lines`

This is just a line or a set of lines. The arguments are 3 1-or-more-D piddles and an optional color piddle (which is 1-D also and simply defines the color between red and blue. This will probably change).

`PDL::Graphics::TriD::Image`

This is a 2-dimensional RGB image consisting of colored rectangles. With OpenGL, this is implemented by texturing so this should be relatively memory and execution-time-friendly.

`PDL::Graphics::TriD::Lattice`

This is a 2-D set of points connected by lines in 3-space. The constructor takes as arguments 3 2-dimensional piddles.

`PDL::Graphics::TriD::Points`

This is simply a set of points in 3-space. Takes as arguments the x, y and z coordinates of the points as piddles.

`PDL::Graphics::TriD::Scale(x,y,z)`

Self-explanatory

`PDL::Graphics::TriD::Translation(x,y,z)`

Ditto

`PDL::Graphics::TriD::Quaternion(c,x,y,z)`

One way of representing rotations is with quaternions. See the appropriate man page.

PDL::Graphics::TriD::ViewPort

This is a special class: in order to obtain a new viewport, you need to have an earlier viewport on hand. The usage is:

$new_vp = $old_vp->new_viewport($x0,$y0,$x1,$y1);

where $x0 etc are the coordinates of the upper left and lower right corners of the new viewport inside the previous (relative to the previous viewport in the (0,1) range.

Every implementation-level window object should implement the new_viewport method.

BUGS

Not enough is there yet.

AUTHOR

Copyright (C) 1997 Tuomas J. Lukka (lukka@husc.harvard.edu). Documentation contributions from Karl Glazebrook (kgb@aaoepp.aao.gov.au). All rights reserved. There is no warranty. You are allowed to redistribute this software / documentation under certain conditions. For details, see the file COPYING in the PDL distribution. If this file is separated from the PDL distribution, the copyright notice should be included in the file.

To install StrHandle, copy and paste the appropriate command in to your terminal.

cpanm

cpanm StrHandle

CPAN shell

perl -MCPAN -e shell
install StrHandle

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

SYNOPSIS

WARNING

DESCRIPTION

SELECTING A DEVICE

ONLINE AND OFFLINE VISUALIZATION

COORDINATE SPECIFICATIONS

SIMPLE ROUTINES

FUNCTIONS

line3d

imag3d

mesh3d

lattice3d

points3d

imagrgb

imagrgb3d

grabpic3d

hold3d, release3d

keeptwiddling3d, nokeeptwiddling3d

twiddle3d

CONCEPTS

Object

Twiddling

OBJECTS

PDL::Graphics::TriD::Lines

PDL::Graphics::TriD::Image

PDL::Graphics::TriD::Lattice

PDL::Graphics::TriD::Points

PDL::Graphics::TriD::Scale(x,y,z)

PDL::Graphics::TriD::Translation(x,y,z)

PDL::Graphics::TriD::Quaternion(c,x,y,z)

PDL::Graphics::TriD::ViewPort

BUGS

AUTHOR

Module Install Instructions

`PDL::Graphics::TriD::Lines`

`PDL::Graphics::TriD::Image`

`PDL::Graphics::TriD::Lattice`

`PDL::Graphics::TriD::Points`

`PDL::Graphics::TriD::Scale(x,y,z)`

`PDL::Graphics::TriD::Translation(x,y,z)`

`PDL::Graphics::TriD::Quaternion(c,x,y,z)`