Name

SPVM::Document::Language::Operators - Operators in the SPVM Language

Description

This document describes operators in the SPVM language.

Operators

An operator is a basic instruction that normally a return value.

Numeric Operators

Unary Plus Operator

The unary plus operator + is a unary operator that returns its operand.

+OPERAND

This operator performs the integer promotional conversion on the operand OPERAND, and returns it.

The return type is the type after the conversion is performed.

Compilation Errors:

The type of OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the unary plus operator
my $num = +10;

Unary Minus Operator

The unary minus operator - is a unary operator that returns the negated value of its operand.

-OPERAND

This operator performs the integer promotional conversion on the operand OPERAND, negates it, and returns it.

The return type is the type after the conversion is performed.

Compilation Errors:

The type of OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the unary minus operator
my $num = -10;

Addition Operator

The addition operator + adds two operands.

LEFT_OPERAND + RIGHT_OPERAND

This operator performs the binary numeric conversion on the left operand LEFT_OPERAND and the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

LEFT_OPERAND + RIGHT_OPERAND

The return type is the type after the binary numeric conversion is performed.

Compilation Errors:

The type of LEFT_OPERAND must be a numeric type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the addition operator
my $result = 1 + 2;

Subtraction Operator

The subtraction operator - subtracts its right operand from its left operand.

LEFT_OPERAND - RIGHT_OPERAND

This operator performs the binary numeric conversion on the left operand LEFT_OPERAND and the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

LEFT_OPERAND - RIGHT_OPERAND

The return type is the type after the binary numeric conversion is performed.

Compilation Errors:

The type of LEFT_OPERAND must be a numeric type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the subtraction operator
my $result = 1 - 2;

Multiplication Operator

The multiplication operator * multiplies two operands.

LEFT_OPERAND * RIGHT_OPERAND

This operator performs the binary numeric conversion on the left operand LEFT_OPERAND and the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

LEFT_OPERAND * RIGHT_OPERAND

The return type is the type after the binary numeric conversion is performed.

Compilation Errors:

The type of LEFT_OPERAND must be a numeric type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the multiplication operator
my $result = 1 * 2;

Division Operator

The division operator / divides its left operand by its right operand.

LEFT_OPERAND / RIGHT_OPERAND

This operator performs the binary numeric conversion on the left operand LEFT_OPERAND and the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

LEFT_OPERAND / RIGHT_OPERAND

The return type is the type after the binary numeric conversion is performed.

Exceptions:

If the type of the left operand LEFT_OPERAND and the right operand RIGHT_OPERAND are an integer type and RIGHT_OPERAND is 0, an exception is thrown.

Compilation Errors:

The type of LEFT_OPERAND must be a numeric type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the division operator
my $result = 1 / 2;

Division Unsigned Int Operator

The division unsigned int operator div_uint interprets its two operands as unsigned 32bit integers, and divides its left operand by its right operand.

LEFT_OPERAND div_uint RIGHT_OPERAND

This operator performs the same operation as the following C language operation, and returns its return value.

(uint32_t)LEFT_OPERAND / (uint32_t)RIGHT_OPERAND

The return type is the int type.

Exceptions:

If RIGHT_OPERAND is 0, an exception is thrown.

Compilation Errors:

The type of LEFT_OPERAND must be the int type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be the int type, otherwise a compilation error occurs.

Examples:

# Examples of the division unsigned int operator
my $result = 1 div_uint 2;

Division Unsigned Long Operator

The division unsigned long operator div_ulong interprets its two operands as unsigned 64bit integers, and divides its left operand by its right operand.

LEFT_OPERAND div_ulong RIGHT_OPERAND

This operator performs the same operation as the following C language operation, and returns its return value.

(uint64_t)LEFT_OPERAND / (uint64_t)RIGHT_OPERAND

The return type is the long type.

Exceptions:

If RIGHT_OPERAND is 0, an exception is thrown.

Compilation Errors:

The type of LEFT_OPERAND must be the long type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be the long type, otherwise a compilation error occurs.

Examples:

# Examples of the division unsigned long operator
my $result = 1L div_ulong 2L;

Modulo Operator

The modulo operator % calculates the modulo of the division of its two operands.

LEFT_OPERAND % RIGHT_OPERAND

This operator performs the binary numeric conversion on the left operand LEFT_OPERAND and the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

RETURN_VALUE = LEFT_OPERAND % RIGHT_OPERAND;
if ((LEFT_OPERAND < 0) != (RIGHT_OPERAND < 0) && RETURN_VALUE) { RETURN_VALUE += RIGHT_OPERAND; }

The return type is the type after the binary numeric conversion is performed.

Exceptions:

If RIGHT_OPERAND is 0, an exception is thrown.

Compilation Errors:

The type of LEFT_OPERAND must be an integer type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be an integer type, otherwise a compilation error occurs.

Examples:

# Examples of the modulo operator
my $result = 1 % 2;

Modulo Unsigned Int Operator

The modulo unsigned int operator mod_uint interprets its two operands as unsigned 32bit integers, and calculates the modulo of the division of its two operands.

LEFT_OPERAND mod_uint RIGHT_OPERAND

This operator performs the same operation as the following C language operation, and returns its return value.

(uint32_t)LEFT_OPERAND % (uint32_t)RIGHT_OPERAND

The return type is the int type.

Exceptions:

If RIGHT_OPERAND is 0, an exception is thrown.

Compilation Errors:

The type of LEFT_OPERAND must be the int type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be the int type, otherwise a compilation error occurs.

Examples:

# Examples of the modulo unsigned int operator
my $result = 1 mod_uint 2;

Modulo Unsigned Long Operator

The modulo unsigned long operator mod_ulong interprets its two operands as unsigned 64bit integers, and calculates the modulo of the division of its two operands.

LEFT_OPERAND mod_ulong RIGHT_OPERAND

This operator performs the same operation as the following C language operation, and returns its return value.

(uint64_t)LEFT_OPERAND % (uint64_t)RIGHT_OPERAND

The return type is is the long type.

Exceptions:

If RIGHT_OPERAND is 0, an exception is thrown.

Compilation Errors:

The type of LEFT_OPERAND must be the long type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be the long type, otherwise a compilation error occurs.

Examples:

# Examples of the modulo unsigned long operator
my $result = 1L mod_ulong 2L;

Increment Operators

Pre-Increment Operator

The pre-increment operator ++ increases the value of an operand by 1, and returns it.

++OPERAND

This operator increases the value of the operand OPERAND by 1 using the additonal operator, performs a type cast to the type of OPERAND on it, and returns it.

The return type is the type of OPERAND.

Compilation Errors:

OPERAND must be a local variable, a class variable, a field access, an element access, a dereference, otherwise a compilation error occurs.

The type of OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the pre-increment operator

# A local variable
++$num;

# A class variable
++$NUM;

# A field access
++$point->{x};

# An element access
++$nums->[0];

# A dereference
++$$num_ref;

Post-Increment Operator

The post-increment operator ++ increases the value of an operand by 1, and returns the value before performing the incrementation.

OPERAND++

This operator increases the value of the operand OPERAND by 1 using the additonal operator, performs a type cast to the type of OPERAND on it, assigns it on OPERAND, and returns OPERAND before performing the incrementation.

The return type is the type of OPERAND.

Compilation Errors:

OPERAND must be a local variable, a class variable, a field access, an element access, a dereference, otherwise a compilation error occurs.

The type of OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the post-increment operator

# A local variable
$num++;

# A class variable
$NUM++;

# A field access
$point->{x}++;

# An element access
$nums->[0]++;

# A dereference
$$num_ref++;

Decrement Operators

Pre-Decrement Operator

The pre-decrement operator -- decreases the value of an operand by 1, and returns it.

--OPERAND

This operator decreases the value of the operand OPERAND by 1 using the subtraction operator, performs a type cast to the type of OPERAND on it, and returns it.

The return type is the type of OPERAND.

Complation Errors:

OPERAND must be a local variable, a class variable, a field access, an element access, a dereference, otherwise a compilation error occurs.

The type of OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the pre-decrement operator

# A local variable
--$num;

# A class variable
--$NUM;

# A field access
--$point->{x};

# An element access
--$nums->[0];

# A dereferenced value
--$$num_ref;

Post-Decrement Operator

The post-increment operator -- decreases the value of an operand by 1, and returns the value before performing the decrementation.

OPERAND--

This operator decreases the value of the operand OPERAND by 1 using the subtraction operator, performs a type cast to the type of OPERAND on it, assigns it on OPERAND, and returns OPERAND before performing the decrementation.

The return type is the type of OPERAND.

Compilation Errors:

OPERAND must be a local variable, a class variable, a field access, an element access, a dereference, otherwise a compilation error occurs.

The type of OPERAND must be a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the post-decrement operator

# A local variable
$num--;

# A class variable
$NUM--;

# A field access
$point->{x}--;

# An element access
$nums->[0]--;

# A dereference
$$num_ref--;

Bitwise Operators

Bitwise AND Operator

The bitwise AND operator & performs the bitwise AND operation.

LEFT_OPERAND & RIGHT_OPERAND

This operator performs the binary numeric conversion on the left operand LEFT_OPERAND and the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

LEFT_OPERAND & RIGHT_OPERAND

The return type is the type after the binary numeric widening conversion is performed.

Compilation Errors:

The type of LEFT_OPERAND must be an integer type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be an integer type, otherwise a compilation error occurs.

Examples:

# Examples of the bitwise AND operator
my $num1 = 0xff;
my $num2 = 0x12;
my $result = $num1 & $num2;

Bitwise OR Operator

The bitwise OR operator | performs the bitwise OR operation.

LEFT_OPERAND | RIGHT_OPERAND

This operator performs the binary numeric conversion on the left operand LEFT_OPERAND and the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

LEFT_OPERAND | RIGHT_OPERAND

The return type is the type after the binary numeric widening conversion is performed.

Compilation Errors:

The type of LEFT_OPERAND must be an integer type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be an integer type, otherwise a compilation error occurs.

Examples:

# Examples of the bitwise OR operator
my $num1 = 0xff;
my $num2 = 0x12;
my $result = $num1 | $num2;

Bitwise NOT Operator

The bitwise NOT operator ~ performs the bitwise NOT operation.

~OPERAND

This operator performs the numeric widening conversion on the operand OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

~OPERAND

The return type is the type that the numeric widening conversion is performed.

Compilation Errors:

The type of OPERAND must be an integer type, otherwise a compilation error occurs.

Examples:

# Examples of the bitwise NOT operator
my $result = ~0xFF0A;

Shift Operators

Left Shift Operator

The left shift operator << performs the arithmetic left shift.

LEFT_OPERAND << RIGHT_OPERAND

This operator performs the numeric widening conversion on the left operand LEFT_OPERAND.

And it performs the numeric widening conversion on the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

LEFT_OPERAND << RIGHT_OPERAND

The return type is the type of LEFT_OPERAND.

Compilation Erorrs:

The type of LEFT_OPERAND must be an integer type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be an integer types within int, otherwise a compilation error occurs.

Examples:

# Examples of the left shift operator
my $result = 0xFF0A << 3;

Arithmetic Right Shift Operator

The arithmetic right shift operator >> performs the arithmetic right shift.

LEFT_OPERAND >> RIGHT_OPERAND

This operator performs the numeric widening conversion on the left operand LEFT_OPERAND.

And it performs the numeric widening conversion on the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

LEFT_OPERAND >> RIGHT_OPERAND;

The return type is the type of LEFT_OPERAND.

Compilation Errors:

The type of LEFT_OPERAND must be an integer type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be an integer types within int, otherwise a compilation error occurs.

Examples:

# Examples of the arithmetic right shift operator
my $result = 0xFF0A >> 3;

Logical Right Shift Operator

The logical right shift operator >>> performs the logical right shift.

LEFT_OPERAND >>> RIGHT_OPERAND

This operator performs the numeric widening conversion on the left operand LEFT_OPERAND.

And it performs the numeric widening conversion on the right operand RIGHT_OPERAND.

And if the type of LEFT_OPERAND is the int type, it performs the same operation as the following C language operation

(uint32_t)LEFT_OPERAND >> RIGHT_OPERAND

If the type of LEFT_OPERAND is the long type, it performs the same operation as the following C language operation.

(uint64_t)LEFT_OPERAND >> RIGHT_OPERAND

And returns its return value.

The return type is the type of LEFT_OPERAND.

Compilation Errors:

The type of LEFT_OPERAND must be an integer type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be an integer types within int, otherwise a compilation error occurs.

Examples:

# Examples of the logical right shift operator
my $result = 0xFF0A >>> 3;

Logical Operator

Logical AND Operator

The logical AND operator && performs a logical AND operation.

LEFT_OPERAND && RIGHT_OPERAND

This operator performs the boolean conversion on the left operand LEFT_OPERAND.

If the evaluated value is 0, it returns 0, otherwise performs the boolean conversion on the right operand RIGHT_OPERAND.

And it returns the evaluated value of RIGHT_OPERAND.

The return type is the int type.

Examples:

# Examples of the logical AND operator
if (1 && 0) {
  
}

Logical OR Operator

The logical OR operator || performes a logical OR operation.

# The logical OR operator
LEFT_OPERAND || RIGHT_OPERAND

Thg logical OR operator performs the boolean conversion on the left operand LEFT_OPERAND.

If the evaluated value is not 0, it returns the evaluated value, otherwise performs the boolean conversion on the right operand RIGHT_OPERAND.

And it returns the evaluated value of RIGHT_OPERAND.

The return type is the int type.

Examples:

# Examples of the logical OR operator
if (1 || 0) {
  
}

Logical NOT Operator

The logical NOT operator ! performes a logical NOT operation.

!OPERAND

Thg logical NOT operator performs the boolean conversion on the operand OPERAND.

If the evaluated value is 0, returns 1, otherwise returns 0.

The return type is the int type.

# Examples of the logical NOT operator
if (!1) {
  
}

Array Length Operator

The array length operator @ gets the length of an array.

@OPERAND
@{OPERAND}

This operator returns the length the array OPERAND.

The return type is the int type.

Exceptions:

OPERAND must be defined, otherwise an exception is thrown.

Compilation Errors:

The type of OPERAND must be an array type, otherwise a compilation error occurs.

Examples:

# Examples of the array length operator
my $nums = new int[10];
my $length = @$nums;

scalar Operator

The scalar operator returns its operand.

scalar OPERAND

This operator returns the operand OPERAND. OPERAND must be the "Array Length Operator" in array length operator.

This operator exists only for readability.

The return type is the int type.

Compilation Errors:

OPERAND must be the array length operator, otherwise a compilation error occurs.

Examples:

# Examples of the scalar operator
my $nums = new int[3];
say scalar @$nums;

Sequential Operator

The sequential operator is an operator with the following syntax.

(OPERAND1, OPERAND2, ..., OPERANDn)

This operator evaluates operands OPERAND1, OPERAND1 ... OPERANDn from left to right, and returns the value of the rightmost operand OPERANDn.

The return type is the type of OPERANDn.

Examples:

# Examples of the sequential operator

# 3 is assigned to $foo
my $foo = (1, 2, 3);

# $x is 3, $ret is 5
my $x = 1;
my $y = 2;
my $result = ($x += 2, $x + $y);

Comparison Operators

Comparison operators compare two operands.

Numeric Comparison Operators

Numeric comparison operators compare two numbers or two addresses of objects.

LEFT_OPERAND == RIGHT_OPERAND
LEFT_OPERAND != RIGHT_OPERAND
LEFT_OPERAND > RIGHT_OPERAND
LEFT_OPERAND >= RIGHT_OPERAND
LEFT_OPERAND < RIGHT_OPERAND
LEFT_OPERAND <= RIGHT_OPERAND
LEFT_OPERAND <=> RIGHT_OPERAND

This operator performs the binary numeric conversion on the left operand LEFT_OPERAND and the right operand RIGHT_OPERAND.

And it performs the same operation as the following C language operation, and returns its return value.

(int32_t)(LEFT_OPERAND == RIGHT_OPERAND);
(int32_t)(LEFT_OPERAND != RIGHT_OPERAND);
(int32_t)(LEFT_OPERAND > RIGHT_OPERAND);
(int32_t)(LEFT_OPERAND >= RIGHT_OPERAND);
(int32_t)(LEFT_OPERAND < RIGHT_OPERAND);
(int32_t)(LEFT_OPERAND <= RIGHT_OPERAND);
(int32_t)(LEFT_OPERAND > RIGHT_OPERAND ? 1 : LEFT_OPERAND < RIGHT_OPERAND ? -1 : 0);

The return type is the int type.

Compilation Errors:

==, !=

The type of the LEFT_OPERAND must be a numeric type, an object type, a reference type, or the undef type, otherwise a compilation error occurs.

The type of the RIGHT_OPERAND must be a numeric type, an object type, a reference type, or the undef type, otherwise a compilation error occurs.

If the type of the LEFT_OPERAND is a numeric type, the type of the RIGHT_OPERAND must be a numeric type, otherwise a compilation error occurs.

If the type of the LEFT_OPERAND is an object type, the type of the RIGHT_OPERAND must be an object type or the undef type, otherwise a compilation error occurs.

If the type of the LEFT_OPERAND is the undef type, the type of the RIGHT_OPERAND must be an object type or the undef type, otherwise a compilation error occurs.

If the type of the LEFT_OPERAND is a reference type, the type of the RIGHT_OPERAND must be a reference type, otherwise a compilation error occurs.

<, <=, >, >=, <=>

The type of the LEFT_OPERAND must be a numeric type, otherwise a compilation error occurs.

The type of the RIGHT_OPERAND must be a numeric type, otherwise a compilation error occurs.

String Comparison Operators

String comparison operators compare tow strings in the dictionary order.

LEFT_OPERAND eq RIGHT_OPERAND
LEFT_OPERAND ne RIGHT_OPERAND
LEFT_OPERAND gt RIGHT_OPERAND
LEFT_OPERAND ge RIGHT_OPERAND
LEFT_OPERAND lt RIGHT_OPERAND
LEFT_OPERAND le RIGHT_OPERAND
LEFT_OPERAND cmp RIGHT_OPERAND

These operators perform the following operations.

Operators	Operations
eq	If LEFT_OPERAND is equal to RIGHT_OPERAND in the dictionary order, returns 1, otherwise returns 0.
ne	If LEFT_OPERAND is not equal to RIGHT_OPERAND in the dictionary order, returns 1, otherwise returns 0.
gt	If LEFT_OPERAND is greater than RIGHT_OPERAND in the dictionary order, returns 1, otherwise returns 0.
ge	If LEFT_OPERAND is greater than or equal to RIGHT_OPERAND in the dictionary order, returns 1, otherwise returns 0.
lt	If LEFT_OPERAND is less than RIGHT_OPERAND in the dictionary order, returns 1, otherwise returns 0.
le	If LEFT_OPERAND is less than or equal to RIGHT_OPERAND in the dictionary order, returns 1, otherwise returns 0.
cmp	If LEFT_OPERAND is greater than RIGHT_OPERAND in the dictionary order, returns 1. If LEFT_OPERAND is less than RIGHT_OPERAND in the dictionary order, return -1. If LEFT_OPERAND is equal to RIGHT_OPERAND in the dictionary order, returns 0.

The return type is the int type.

Compilation Errors.

The type of LEFT_OPERAND must be the string type or the byte[] type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be the string type or the byte[] type, otherwise a compilation error occurs.

Constant Operator

The constant operator gets a constant value represented by a literal.

LITERAL

LITERAL is a literal.

The return type is the type of LITERAL.

Compilation Errors:

Compilation errors casued by literal syntax could occur.

length Operator

The length operator gets the length of a string.

length OPERAND

If the string OPERAND is defind, this operator returns the length of OPERAND. Note that this length is in bytes, not the number of UTF-8 characters.

If OPERAND is not defined, returns 0.

The return type is the int type.

Compilation Errors:

The type of OPERAND must be the string type, otherwise a compilation error occurs.

Examples:

# Examples of The length operator

# The length is 5
my $message = "Hello";
my $length = length $message;

# The length is 9
my $message = "あいう";
my $length = length $message;

String Concatenation Operator

The string concatenation operator . concats two strings.

LEFT_OPERAND . RIGHT_OPERAND

This operator performs the numeric-to-string conversion on the left operand LEFT_OPERAND if the type of LEFT_OPERAND is a numeric type.

And it performs the numeric-to-string conversion on the right operand RIGHT_OPERAND if the type of RIGHT_OPERAND is a numeric type.

And it concats LEFT_OPERAND and RIGHT_OPERAND, and returns its return value.

The type of LEFT_OPERAND and RIGHT_OPERAND are allowed to be the byte[] type.

The return type is the string type.

Exceptions:

LEFT_OPERAND must be defined, otherwise an exception is thrown.

RIGHT_OPERAND must be defined, otherwise an exception is thrown.

Compilation Errors:

The type of LEFT_OPERAND must be the string type, the byte[] type, or a numeric type, otherwise a compilation error occurs.

The type of RIGHT_OPERAND must be the string type, the byte[] type, or a numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the string concatenation operator
my $result = "abc" . "def";
my $result = "def" . 34;

new_string_len Operator

The new_string_len operator creates a new string with a length.

new_string_len OPERAND

This operator performs the integer promotional conversion on the length OPERAND.

And creates a new string with the length, fills all characters in the string with \0, and returns it.

The return type is the string type.

Exceptions:

OPERAND must be greater than or equal to 0, otherwise an exception is thrown.

Compilation Errors:

The type of OPERAND must be an integer type within int, otherwise a compilation error occurs.

Examples:

# Examples of the new_string_len operator
my $message = new_string_len 5;

make_read_only Operator

The make_read_only operator makes a string read-only.

make_read_only OPERAND

If the string OPERAND is defined, this operator makes OPERAND read-only.

A read-only string cannnot be cast to the mutable string type. If so, an exception is thrown.

The return type is the void type.

Compilation Errors:

OPERAND must be the string type, otherwise a compilation error occurs.

Examples:

# Examples of the make_read_only operator

# A string
my $string = new_string_len 3;

# Make the string read-only
make_read_only $string;

# The conversion to the mutable string type throw an exception.
my $string_mutable = (mutable string)$string;

is_read_only Operator

The is_read_only operator checks if a string is read-only.

is_read_only OPERAND

If the string OPERAND is defined and read-only, the is_read_only operator returns 1, otherwise returns 0.

The return type is the int type.

Compilation Errors:

OPERAND must be the string type, otherwise a compilation error occurs.

Examples:

# Examples of the is_read_only operator
my $message = "Hello";
my $is_read_only = is_read_only $message;

print Operator

The print operator prints a string to standard output.

print OPERAND

This operator outputs the string OPERAND to the SPVM's standard output.

If OPERAND is not defined, this operator outputs nothing.

The return type is the void type.

Compilation Errors:

OPERAND must be the string type, otherwise a compilation error occurs.

say Operator

The say operator prints a string to standard output with a newline.

say OPERAND

This operator outputs the string OPERAND to the SPVM's standard output with a newline \n.

If OPERAND is not defined, this operator outputs a newline \n.

The return type is the void type.

Compilation Errors:

OPERAND must be the string type, otherwise a compilation error occurs.

warn Operator

The warn operator prints a string to standard error with a stack trace.

warn
warn OPERAND

If OPERAND is omitted, OPERAND is set to the string "Warning".

This operator outputs OPERAND to the SPVM's standard error.

If OPERAND is not defined, this operator outputs the string "undef".

If the type of OPERAND is the string type and OPERAND is defined, this operator outputs OPERAND.

If the type of OPERAND is an object type except for the string type and OPERAND is defined, this operator outputs the type name and the address of OPERAND, such as "Point(0x55d8a44ed090)".

If the end character of the OPERAND is not \n, this operator outputs a newline, two tabs and a stack trace information following the output above.

A stack trace information consists of the current method name, file name, and line number.

MyClass->test at path/MyClass.spvm line 33

The return type is the void type.

Compilation Errors:

The type of OPERAND must be an object type, otherwise a compilation error occurs.

Examples:

warn;
warn "Something is wrong.";

# Point(0x55d8a44ed090)
my $point = Point->new;
warn $point;

FILE Operator

The __FILE__ operator gets the path of the file where the current class is defined.

__FILE__

This operator creates a string with the path of the file where the current class is defined, and returns it.

The return type is the string type.

The return value can be changed by the file directive.

Examples:

# Examples of the __FILE__ operator
class Foo::Bar {
  static method baz : void () {
    # path/SPVM/Foo/Bar.spvm
    my $file_name = __FILE__;
  }
}

LINE Operator

The __LINE__ operator gets the current line number.

__LINE__

This operator returns the current line number.

The return type is the int type.

Examples:

# Examples of the __LINE__ operator
class Foo::Bar {
  static method baz : void () {
    my $line = __LINE__;
  }
}

PACKAGE Operator

The __PACKAGE__ operator gets the name of the outmost class.

__PACKAGE__

This operator creates a string with the name of the outmost class, and returns it.

The return type is the string type.

Examples:

class Foo::Bar {
  static method baz : void () {
    # Foo::Bar
    my $outmost_class_name = __PACKAGE__;
    
    my $anon_method = method : void () {
      # Foo::Bar
      my $outmost_class_name = __PACKAGE__;
    };
  }
}

new Operator

The new operator creates a new object, a new array, and a new multi-dimensional array.

See also the use statement about the way to load classes.

See also SPVM::Document::Language::GarbageCollection about garbage collection of objects.

Creating an Object

The following syntax of the new operator creates a new object.

new CLASS_TYPE;

The class type CLASS_TYPE must be a loaded class type.

This operator creates a new object of CLASS_TYPE, and returns it.

The fields of the new object are initialized by its type initial value.

The return type is CLASS_TYPE.

Compilation Errors:

CLASS_TYPE must be a loaded class type, otherwise a compilation error occurs.

Examples:

# Examples of the new operator - Creating a new object
my $object = new Foo;

Creating an Array

The following syntax of the new operator creates a new array.

new BASIC_TYPE[LENGTH]

The basic type BASIC_TYPE must be a loaded basic type.

This operator performs the integer promotional conversion on the length LENGTH.

And creates a new array of the length LENGTH which element type is BASIC_TYPE.

And all elements of the new array are initialized by its type initial value.

And returns the new array.

The return type is BASIC_TYPE[].

Exceptions:

LENGTH must be greater than or equal to 0, otherwise an exception is thrown.

Compilation Errors:

LENGTH must be an integer type within int, otherwise a compilation error occurs.

Examples:

# Examples of the new operator - Creating a new array
my $values = new int[3];
my $objects = new Foo[3];
my $objects = new object[3];
my $mulnum_values = new Complex_2d[3]

Creating a Multi-Dimensional Array

The following syntax of the new operator creates a new multi-dimensional array.

new BASIC_TYPE[]..[LENGTH]

([].. means one or more [].)

The basic type BASIC_TYPE must be a loaded basic type.

This operator performs the integer promotional conversion on the length LENGTH.

And creates a new multi-dimensional array of the length LENGTH which element type is BASIC_TYPE[]...

And all elements of the new multi-dimensional array are initialized by its type initial value.

And returns the new multi-dimensional array.

The return type is BASIC_TYPE[]..[].

Exceptions:

LENGTH must be greater than or equal to 0, otherwise an exception is thrown.

Compilation Errors:

LENGTH must be an integer type within int, otherwise a compilation error occurs.

The type dimension must be less than or equal to 255, otherwise a compilation error occurs.

Examples:

# Examples of the new operator - Creating a new multi-dimensional array

# 2 dimentional int array
my $muldim_values = new int[][3];

# 3 dimentional int array
my $muldim_values = new int[][][3];

Array Initialization

The syntax of the array initialization creates a new array and sets the elements, and returns the new array.

[ELEMENT1, ELEMENT2, .., ELEMENTn]

This is expanded to the following code.

(
  # Create a new array
  my $array = new ELEMENT1_TYPE[n],
  
  # Set elements
  $array->[0] = ELEMENT1,
  $array->[1] = ELEMENT2,
  ...,
  $array->[n - 1] = ELEMENTn,
  $array,
)

ELEMENT1_TYPE is the type of ELEMENT1.

If elements does not exist, ELEMENT1_TYPE is the any object type object, n is 0, and setting elements is not performed.

The return type is ELEMENT1_TYPE[].

Compilation Errors:

If the type of ELEMENT1 is the undef type, a compilation error occurs.

Examples:

# Examples of the array initialization

# int array
my $nums = [1, 2, 3];

# double array
my $nums = [1.5, 2.6, 3.7];

# string array
my $strings = ["foo", "bar", "baz"];

The int array example is expanded to the following code.

# int array
my $nums = new int[3];
$nums->[0] = 1;
$nums->[1] = 2;
$nums->[2] = 3;

Key-Value Array Initialization

The syntax of the key-value array initialization creates a new array and sets the elements with key-value pairs, and returns the new array.

{ELEMENT1, ELEMENT2, ELEMENT3, ELEMENT4}

This syntax is the same as "Array Initialization", but the return type is always the any object array type object[].

And the length of the elements must be an even number.

Compilation Errors:

The length of the elements must be an even number, a compilation error occurs.

Examples:

# Examples of the key-value array initialization

# Empty
my $key_values = {};

# Key values
my $key_values = {foo => 1, bar => "Hello"};

Anon Method Operator

The anon method operator creates an anon method.

ANON_METHOD

This operator defines an anon method ANON_METHOD, creates a new object of the anon class that owns the anon method, and retunrs it.

Examples:

my $comparator = (Comparator)method : int ($x1 : object, $x2 : object) {
  my $point1 = (Point)$x1;
  my $point2 = (Point)$x2;
  
  return $point1->x <=> $point2->x;
};

undef Operator

The undef operator returns an undefined value.

undef

The return type is the undef type.

Examples:

# Examples of the undef operator
my $string = (string)undef;

if (undef) {
  
}

my $message = "Hello";
if ($message == undef) {
  
}

copy Operator

The copy operator copies a numeric array, a multi-numeric array or a string.

copy OPERAND

If the operand OPERAND is not an undefined value, this operator creates a new object of the same type as the operand OPERAND, and copies the elements of the array or the characters of the string into the new object, and returns it.

If OPERAND is not defined, this operator returns an undefined value.

The read-only flag of the string is not copied.

The return type is the type of OPERAND.

Compilation Errors:

The type of the operand must be the string type, a numeric array type, or a multi-numeric array type, otherwise a compilation error occurs.

Examples:

# Exampels of the copy operator
my $message = copy "abc";

dump Operator

The dump operator gets the string representation dumping the data contained in the object.

dump OPERAND

This operator creates a new string with the string representation dumping the data contained in the object OPERAND and returns it.

The following is an example of the return value the dump operator.

# An return vlaue of the dump operator
TestCase::Operator::DumpTest1 (0x55f21f7e6050) {
  byte_value => 1,
  short_value => 2,
  int_value => 3,
  long_value => 4,
  float_value => 1.1,
  double_value => 1.2,
  string_value => "a",
  int_array => [
    1,
    2,
    3
  ] : int[](0x55f21fb9b8d0),
  object_value => TestCase::Operator::DumpTest1 (0x55f21f764640) {
    byte_value => 0,
    short_value => 0,
    int_value => 0,
    long_value => 0,
    float_value => 0,
    double_value => 0,
    string_value => undef,
    int_array => undef,
    object_value => undef
  }
}

The return type is the string type.

The string representation might be changed to make it more readable. So don't use the dump operator for the purpose of the data serialization.

Compilation Errors:

OPERAND must be an object type, ohterwise a compilation error occurs.

Reference Operator

The reference operator \ creates the reference to the value owned by a variable.

\VARIALBE

This operator creates the reference to the value owned by the variable VARIALBE, and returns it.

VARIALBE is must be a local variable of a numeric type or a multi-numeric type.

The return type is the Reference Types of VARIALBE.

Compilation Errors:

VARIALBE must be a local variable of a numeric type or a multi-numeric type, otherwise a compilation error occurs.

Examples:

# Examples of the reference operator

# Create a reference of a numeric type
my $num : int;
my $num_ref = \$num;

# Create a reference of a multi-numeric type
my $z : Complex_2d;
my $z_ref = \$z;

Dereference Operator

The dereference operator $ gets a referenced value.

$VARIABLE

This operator returns the value referenced by the variable VARIABLE of a reference type.

The return type is the type of the value referenced by VARIABLE.

Compilation Errors:

The type of VARIABLE must be a reference type, otherwise a compilation error occurs.

Examples:

# Examples of the dereference operator
my $num : int;
my $num_ref = \$num;
my $num_deref = $$num_ref;

my $z : Complex_2d;
my $z_ref = \$z;
my $z_deref = $$z_ref;

Assignment Operator

The assignment operator = performs an assignment.

LEFT_OPERAND = RIGHTH_OPERAND

The assignment operator performs different operations depending on the left operand LEFT_OPERAND.

If LEFT_OPERAND is a local variable, this operator performs the operation that sets a local variable.

If LEFT_OPERAND is a class variable, this operator performs the operation that sets a class variable.

If LEFT_OPERAND is an element access, this operator performs the operation that sets an array element.

If LEFT_OPERAND is a field access, this operator performs the operation that sets a field.

If LEFT_OPERAND is a dereference, this operator performs the operation that sets a referenced value.

If LEFT_OPERAND is the exception variable, this operator performs the operation that sets the exception variable.

See also "Assignment" in SPVM::Document::Language::GarbageCollection about how the assignment operator changes the reference counts of LEFT_OPERAND and RIGHTH_OPERAND.

Examples:

# Examples of the assignment operator

# A local variable
$num = 1;

# A class variable
$NUM = 1;

# A field access
$point->{x} = 1;

# An element access
$nums->[0] = 1;

# A dereference
$$num_ref = 1;

# The exception variable
$@ = 2;

Special Assignment Operators

A special assignment operator is the combination of an operator such as +, - and the assignment operator =.

LEFT_OPERAND OPERATOR= RIGHTH_OPERAND

A special assignment operator is expanded to the following code.

LEFT_OPERAND = (TYPE_OF_LEFT_OPERAND)(LEFT_OPERAND OPERATOR RIGHTH_OPERAND)

See the following code using a special assignment operator +=. $x is the int type.

$x += 2;

This is expanded to the following code.

$x = (int)($x + 2)

List of Special Assignment Operators:

The addition assignment operator	+=
The subtraction assignment operator	-=
The multiplication assignment operator	*=
The division assignment operator	/=
The modulo assignment operator	%=
The bitwise AND assignment operator	&=
The bitwise OR assignment operator	\|=
The left shift assignment operator	<<=
The arithmetic right shift assignment operator	>>=
The logical right shift assignment operator	>>>=
The concatenation assignment operator	.=

Examples:

# Special assignment operators
$x += 1;
$x -= 1;
$x *= 1;
$x /= 1;
$x &= 1;
$x |= 1;
$x ^= 1;
$x %= 1;
$x <<= 1;
$x >>= 1;
$x >>>= 1;
$x .= "abc";

Getting and Setting Operators

Getting a Local Variable

The operation of getting local variable gets the value of a local variable.

$var

$var is a local variable access.

This operation returns the value of $var.

The return type is the type of $var.

Compilation Errors:

Compiliation errors caused by the syntax of the local variable access could occur.

Examples:

$var;

Setting a Local Variable

The operation of setting a local variable sets a local variable.

$var = OPERAND

$var is a local variable access.

This operation sets $var to OPERAND using the assignment operator, and returns the value after setting.

The return value is the type of $var.

Compilation Errors:

Compiliation errors caused by the syntax of the local variable access could occur.

The assignment must satisfy the assignment requirement, otherwise a compilation error occurs.

Examples:

$var = 3;

head3 Getting a Class Variable

The operation of getting a class variable gets the value of a class variable.

$VAR

$VAR is a class variable access.

This operation returns the value of $VAR.

The return type is the type of $VAR.

Compilation Errors:

Compiliation errors caused by the syntax of the class variable access could occur.

Examples:

# Examples of getting a class variable
class Foo {
  our $VAR : int;
  
  static method bar : int () {
    
    my $var1 = $Foo::VAR;
    
    # $Foo::VAR
    my $var2 = $VAR;
    
    my $anon_method = method : void () {
      # $Foo::BAR
      $VAR;
    }
  }
}

Setting a Class Variable

The operation of setting a class variable operator sets a class variable.

$VAR = OPERAND

$VAR is a class variable access.

This operation sets $VAR to OPERAND using the assignment operator, and returns the value after setting.

The return type is the type of $VAR.

Compilation Errors:

Compiliation errors caused by the syntax of the class variable access could occur.

The assignment must satisfy the assignment requirement, otherwise a compilation error occurs.

Examples:

# Examples of setting a class variable
class Foo {
  our $VAR : int;
  
  static method bar : int () {
    $Foo::VAR = 1;
    
    # $Foo::VAR = 3
    $VAR = 3;
  }
  my $anon_method = method : void () {
    # $Foo::VAR = 5
    $VAR = 5;
  }
}

Getting an Array Element

The operation of getting an array element gets an element of an array.

ARRAY->[INDEX]

ARRAY->[INDEX] is an element access.

This operator performs the integer promotional conversion on INDEX.

And returns the element of ARRAY at INDEX.

The return type is the element type of ARRAY.

Exceptions:

ARRAY must be defined, otherwise an exception is thrown.

INDEX must be greater than or equal to 0, otherwise an exception is thrown.

Compilation Errors:

Compiliation errors caused by the syntax of the element access could occur.

Examples:

my $nums = new int[3];
my $num = $nums->[1];

my $points = new Point[3];
my $point = $points->[1];

Setting an Array Element

The operation of setting array element sets an element of an array.

ARRAY->[INDEX] = OPERAND

ARRAY->[INDEX] is an element access.

This operator performs the integer promotional conversion on INDEX.

And sets the element of ARRAY at INDEX to OPERAND using the assignment operator, and returns the element after setting.

The return type is the element type.

Exceptions:

ARRAY must be defined, otherwise an exception is thrown.

INDEX must be greater than or equal to 0, otherwise an exception is thrown.

Compilation Errors:

Compiliation errors caused by the syntax of the element access could occur.

The assignment must satisfy the assignment requirement, otherwise a compilation error occurs.

Examples:

my $nums = new int[3];
$nums->[1] = 3;

my $points = new Point[3];
$points->[1] = Point->new(1, 2);

Getting a Character

The operation of getting a character gets a character of a string.

STRING->[INDEX]

STRING->[INDEX] is an character access.

The type of STRING is the string type.

This operator performs the integer promotional conversion on INDEX.

And returns the character of STRING at INDEX.

The return type is the byte type.

Exceptions:

STRING must be defined, otherwise an exception is thrown.

INDEX must be greater than or equal to 0, otherwise an exception is thrown.

Compilation Errors:

Compiliation errors caused by the syntax of the character access could occur.

Examples:

my $string = "abc";
my $char = $string->[0];

Setting a Character

The operation of setting a character sets the character of a string.

STRING->[INDEX] = OPERAND

STRING->[INDEX] is an character access.

This operator performs the integer promotional conversion on INDEX.

And sets the character of STRING at INDEX to OPERAND using the assignment operator, and returns the character after setting.

The return type is the byte type.

Exceptions:

STRING must be defined, otherwise an exception is thrown.

INDEX must be greater than or equal to 0, otherwise an exception is thrown.

If STRING is not a mutable string, an exception is thrown.

Compilation Errors:

Compiliation errors caused by the syntax of the character access could occur.

The assignment must satisfy the assignment requirement, otherwise a compilation error occurs.

Examples:

my $string = new_string_len 3;
$string->[0] = 'a';

Getting a Field

The operation of getting field gets the value of a field of a class type.

INVOCANT->{FIELD_NAME}

INVOCANT->{FIELD_NAME} is a field access.

This operation gets the value of the field specified by FIELD_NAME of the type of INVOCANT.

The retrun type is the type of the field.

Compilation Errors:

Compiliation errors caused by the syntax of the field access could occur.

Examples:

my $point = Point->new;
my $x = $point->{x};

Setting a Field

The operation of setting field sets the field of a class type.

INVOCANT->{FIELD_NAME} = OPERAND

INVOCANT->{FIELD_NAME} is a field access.

The type of INVOCANT is a class type.

This operation sets the field specified by FIELD_NAME of the type of INVOCANT to OPERAND using the assignment operator, and returns the value of the field after setting.

The return type is the field type.

Compilation Errors:

Compiliation errors caused by the syntax of the field access could occur.

The assignment must satisfy the assignment requirement, otherwise a compilation error occurs.

Examples:

my $point = Point->new;
$point->{x} = 1;

Getting a Multi-Numeric Field

The operation of getting a multi-numeric field gets the value of a field of a multi-numeric type.

INVOCANT->{FIELD_NAME}

INVOCANT->{FIELD_NAME} is a field access.

The type of INVOCANT is a multi-numeric type.

This operation gets the value of the field specified by FIELD_NAME of the type of INVOCANT.

The retrun type is the type of the field.

Compilation Errors:

Compiliation errors caused by the syntax of the field access could occur.

Examples:

my $z : Complex_2d;
my $re = $z->{re};

Setting a Multi-Numeric Field

The operation of setting multi-numeric field sets the field of the multi-numeric type.

INVOCANT->{FIELD_NAME} = OPERAND

INVOCANT->{FIELD_NAME} is a field access.

The type of INVOCANT is a multi-numeric type.

This operation sets the field specified by FIELD_NAME of the type of INVOCANT to OPERAND using the assignment operator, and returns the value of the field after setting.

The return type is the field type.

Compilation Errors:

Compiliation errors caused by the syntax of the field access could occur.

The assignment must satisfy the assignment requirement, otherwise a compilation error occurs.

Examples:

my $z : Complex_2d;
$z->{re} = 2.5;

Getting a Referenced Multi-Numeric Field

The operation of getting a multi-numeric field gets the value of a field of a multi-numeric type referenced by a multi-numeric Reference Types.

This operation is expaned to the following code.

($INVOCANT)->{FIELD_NAME}

The type of INVOCANT is a multi-numeric refenrece type.

Compilation Errors:

Compiliation errors caused by the syntax of the field access could occur.

Compiliation errors caused by the dereference operator could occur.

Examples:

my $z : Complex_2d;
my $z_ref = \$z;
my $re = $z_ref->{re};

Setting a Referenced Multi-Numeric Field

The operation of setting a multi-numeric field sets the value of a field of a multi-numeric type referenced by a multi-numeric Reference Types.

This operation is expaned to the following code.

($INVOCANT)->{FIELD_NAME} = OPERAND

The type of INVOCANT is a multi-numeric refenrece type.

Compilation Errors:

Compiliation errors caused by the syntax of the field access could occur.

Compiliation errors caused by the dereference operator could occur.

The assignment must satisfy the assignment requirement, otherwise a compilation error occurs.

Examples:

my $z : Complex_2d;
my $z_ref = \$z;
$z_ref->{re} = 2.5;

Getting a Referenced Value

The operation of getting the referenced value gets a referenced value.

See the dereference operator.

Setting a Referenced Value

The operation of setting the referenced value sets a referenced value.

$VARIABLE = OPERAND

Thie operation sets the value referenced by the reference VARIABLE to OPERAND using the assignment operator, and returns the value after setting.

The return type is the type of the referenced value.

Compilation Errors:

The type of VARIABLE must be a reference type, otherwise a compilation error occurs.

The assignment must satisfy the assignment requirement, otherwise a compilation error occurs.

Examples:

my $num : int;
my $num_ref : int* = \$num;
$$num_ref = 1;

my $z : Complex_2d;
my $z_ref : Complex_2d* = \$z;

my $z2 : Complex_2d;

$$z_ref = $z2;

Getting the Exception Variable

The operation of getting the exception variable gets the string stored in the exception variable.

$@

This operator returns the string stored in the exception variable.

The return type is the string type.

Examples:

# Examples of getting the exception variable
my $message = $@;

Setting the Exception Variable

The operation of setting the exception variable sets the exception variable.

$@ = OPERAND

This operator sets the exception variable to OPERAND using the assignment operator.

The return type is the string type.

Compilation Errors:

The assignment must satisfy the assignment requirement, otherwise a compilation error occurs.

Examples:

# Examples of setting the exception variable
$@ = "Error";

Type Cast

A type cast performs a type conversion.

# A type cast
(TYPE)OPERAND

# A postfix type cast
OPERAND->(TYPE)

A type cast performs the type conversion on OPERAND from the type of the operand OPERAND to the type TYPE, and returns the value after the type conversion.

The return type is TYPE.

Compilation Errors:

OPERAND must satisfy the cast requirement, otherwise a compilation error occurs.

Examples:

# Examples of the type cast

# long to int 
my $num = (int)123L;

# byte[] to string
my $num = (string)new byte[3];

# string to byte[]
my $num = (byte[])"Hello";

# Postfix type cast
my $stringable = Point->new->(Stringable);

isa Operator

The isa operator checks whether an operand can be assigned to a type.

OPERAND isa TYPE

If the type TYPE is a numeric type, a multi-numeric type, a reference type, the any object type, or the any object array type, this operator checks the assignment requirement without implicite type convertion.

If the assignment requirement is satisfied, this operator returns 1, otherwise returns 0.

If TYPE is an object type except for the any object type, or the any object array type, this operator checks the assignment requirement without implicite conversion at runtime.

If the runtime assignment requirement is satisfied, this operator returns 1, otherwise returns 0.

The return type is the int type.

Compilation Errors:

If the runtime assignment requirement is checked, OPERAND must be an object type, otherwise a compilation error occurs.

Examples:

if ($value isa int) {
  
}

if ($value isa Point) {
  
}

if ($value isa Point3D) {
  
}

if ($value isa Stringable) {
  
}

if ($value isa int) {
  
}

is_type Operator

The is_type operator checks whether the type of an operand is equal to a type.

OPERAND is_type TYPE

If the type TYPE is a numeric type, a multi-numeric type, a reference type, the any object type, or the any object array type, this operator checks the compilation type of OPERAND is equal to TYPE.

If it is true, this operator returns 1, otherwise returns 0.

If the type is an object type except for the any object type, or the any object array type, this operator checks the runtime type of OPERAND is equal to TYPE.

If it is true, this operator returns 1, otherwise returns 0.

The return type is int type.

Compilation Errors:

If the runtime check is performed, OPERAND must be an object type, otherwise a compilation error occurs.

Examples:

if ($object is_type int) {
  
}

if ($object is_type Point) {
  
}

if ($object is_type int[]) {
  
}

if ($object is_type Stringable[]) {
  
}

is_compile_type Operator

The is_compile_type operator checks whether the compilation type of an operand is equal to a type.

OPERAND is_compile_type TYPE

If the compilation type of OPERAND is equal to the type TYPE, returns 1, otherwise returns 0.

The return type is int type.

Examples:

{
  my $value : int;
  if ($value is_compile_type int) {
    # Pass
  }
}

{
  my $object : object = new TestCase::Minimal;
  if ($object is_compile_type object) {
    # Pass
  }
}

{
  my $value : Stringer = method : string () { return "aaa"; };
  if ($value is_compile_type Stringer) {
    # Pass
  }
}

isa_error Operator

The isa_error operator checks whether the type specified by a basic type ID can be assigned to a class type. This operator is normally used for error classes to check "eval_error_id Operator" in eval_error_id>.

OPERAND isa_error TYPE

This operator performs the integer promotional conversion on the operand OPERAND.

And this operator checks whether the type specified by the basic type ID OPERAND satisfies the assignment requirement without implicite conversion to the type TYPE.

If it is satisfied, this operator returns 1, otherwise returns 0.

The return type is int type.

Compilation Errors:

OPERAND must be an integer type within int, otherwise a compilation error occurs.

TYPE must be a class type, otherwise a compilation error occurs.

Examples:

if (eval_error_id isa_error Error) {
  
}

if (eval_error_id isa_error Error::System) {
  
}

is_error Operator

The is_error operator checks whether the type specified by a basic type ID is equal to a class type. This operator is normally used for error classes to check "eval_error_id Operator" in eval_error_id>.

OPERAND is_error TYPE

This operator performs the integer promotional conversion on the operand OPERAND.

And this operator checks whether the type specified by the basic type ID OPERAND is equal to the type TYPE.

If it is, this operator returns 1, otherwise returns 0.

The return type is int type.

Compilation Errors:

OPERAND must be an integer type within int, otherwise a compilation error occurs.

TYPE must be a class type, otherwise a compilation error occurs.

Examples:

if (eval_error_id is_error Error) {
  
}

if (eval_error_id is_error Error::System) {
  
}

type_name Operator

The type_name operator gets the type name of the object.

type_name OPERAND

If the object OPERAND is defined, creates a string with the type name of OPERAND and returns it, otherwise returns an undefined value.

The return type is the string type.

Compilation Errors.

OPERAND must be an object type, otherwise a compilation error occurs.

Examples:

# "Point"
my $point = Point->new;
my $type_name = type_name $point;

# "Point"
my $point = (object)Point->new;
my $type_name = type_name $point;

compile_type_name Operator

The compile_type_name operator gets the compilation type of the operand OPERAND.

compile_type_name OPERAND

This operator creates a new string with the compilation type name of OPERAND and returns it.

The return type is the string type.

Examples:

# "Point"
my $point = Point->new;
my $type_name = type_name $point;

# "object"
my $point = (object)Point->new;
my $type_name = type_name $point;

basic_type_id Operator

The basic_type_id operator gets the basic type ID of a type.

basic_type_id TYPE

This operator returns the basic type ID of the type TYPE.

The return type is the int type.

Examples:

my $basic_type_id = basic_type_id int;

my $basic_type_id = basic_type_id int[];

my $error_basic_type_id = basic_type_id Error;

Method Call

The method call syntax calls a method.

Class Method Call

A method defined as the class method can be called using the class method call.

ClassName->MethodName(ARGS1, ARGS2, ...);

&MethodName(ARGS1, ARGS2, ...);

& means the current class.

If & is used in anon method, it means its outmost class.

Compilation Errors:

If the number of arguments does not correct, a compilation error occurs.

If the types of arguments have no type compatible, a compilation error occurs.

Examples:

class Foo {
  
  static method main : void () {
    
    my $result = Foo->bar(1, 2, 3);
    
    # Same as Foo->bar
    my $result = &bar(1, 2, 3);
    
    my $anon_method = method : void () {
      # Same as Foo->bar;
      my $result = &foo;
    };
  }
  
  static method foo : int () {
    return 5;
  }
}

Getting an Enumeration Value

The operation of getting an enumeration value gets a value of an enumeration.

The definition of an enumeration value is replaced to a class method, so this operation is the same as a class method call.

# Definition of an enumeration
class MyClass {
  enum {
    VALUE1,
    VALUE2,
    VALUE3,
  }
}

# These are replaced to definitions of class methods
class MyClass {
  static method VALUE1 : int () { return 0; }
  static method VALUE2 : int () { return 1; }
  static method VALUE3 : int () { return 2; }
}

However, there is one important difference.

The class method calls are replaced to interger literals at compilation time.

For this replacement, this operation is used as an operand of the case statement.

switch ($num) {
  case MyClass->VALUE1: {
    # ...
  }
  case MyClass->VALUE2: {
    # ...
  }
  case MyClass->VALUE3: {
    # ...
  }
  default: {
    # ...
  }
}

Note that if an enumeration value is changed, the binary compatibility is broken.

Instance Method Call

A method defined as the instance method can be called using the instance method call.

Instance->MethodName(ARGS1, ARGS2, ...);

The called method is resolved from the type of the instance.

Compilation Errors:

If the number of arguments does not correct, a compilation error occurs.

If the types of arguments have no type compatible, a compilation error occurs.

Examples:

$object->bar(5, 3. 6);

The SUPER:: qualifier calls the method of the super class of the current class.

$object->SUPER::bar(5, 3. 6);

A instance method can be called statically by specifing the calss name.

$point3d->Point::clear;

can Operator

The can operator checks if a method can be called.

OPERAND can METHOD_NAME

An empty string "" means an anon method.

If OPERAND can call the method given by METHOD_NAME, returns 1, otherwise returns 0.

The return type is int type.

Compilation Errors:

The type of OPERAND must be the class type or the interface type, otherwise a compilation error occurs.

The METHOD_NAME must be a method name or an empty string "", otherwise a compilation error occurs.

Examples:

my $stringable = (Stringable)Point->new(1, 2);

if ($stringable can to_string) {
  # ...
}

if ($stringable can "") {
  # ...
}

args_width Operator

The args_width operator gets the stack length of the arguments passed to the method.

args_width

Note that the stack length of the arguments is different from the length of the arguments.

If the method call is the instance method call, the stack length of the arguments is the length of the arguments + 1 for the invocant.

If an argument is a multi-numeric type, the stack length of the argument becomes the length of the fields.

Examples:

static method my_static_method : int ($args : int, $bar : int = 0) {
  my $args_width = args_width;
  
  return $args_width;
};

# 1
&my_static_method(1);

# 2
&my_static_method(1, 2);

static method my_instance_method : int ($args : int, $bar : int = 0) {
  my $args_width = args_width;
  
  return $args_width;
};

# 2 (1 + the invocant)
&my_instance_method(1);

# 3 (2 + the invocant)
&my_instance_method(1, 2);

static method my_mulnum_method : int ($z : Complex_2d, $bar : int = 0) {
  my $args_width = args_width;
  
  return $args_width;
};

# 2 (The length of the fields of Complex_2d)
my $z : Complex_2d;
&my_mulnum_method($z);

# 3 (The length of the fields of Complex_2d + 1)
my $z : Complex_2d;
&my_mulnum_method($z, 2);

eval_error_id Operator

The eval_error_id operatoer gets the value of eval_error_id.

eval_error_id

See SPVM::Document::Language::ExceptionHandling about the way to use the eval_error_id operator.

weaken Operator

The weaken operator enables a weak reference.

weaken INVOCANT->{FIELD_NAME};

INVOCANT->{FIELD_NAME} is a field access.

This operator enable a weak reference of the field specified by FIELD_NAME of the type of INVOCANT.

The return type is the void type.

Compilation Errors:

Compiliation errors caused by the syntax of the field access could occur.

The type of INVOCANT->{FIELD_NAME} must be an object type, otherwise a compilation error occurs.

Examples:

# Exmaples of the weaken operator
weaken $object->{point};

unweaken Operator

The unweaken operator disables a weak reference.

unweaken INVOCANT->{FIELD_NAME};

INVOCANT->{FIELD_NAME} is a field access.

This operator enable a weak reference of the field specified by FIELD_NAME of the type of INVOCANT.

The return type is the void type.

Compilation Errors:

Compiliation errors caused by the syntax of the field access could occur.

The type of INVOCANT->{FIELD_NAME} must be an object type, otherwise a compilation error occurs.

Examples:

# Exmaples of the unweaken operator
unweaken $object->{point};

isweak Operator

The isweak operator checks if the weak reference of a field is enabled.

isweak INVOCANT->{FIELD_NAME};

INVOCANT->{FIELD_NAME} is a field access.

If the field specified by FIELD_NAME of the object INVOCANT is weaken, this operator returns 1, otherwise returns 0.

The return type is the int type.

Compilation Errors:

Compiliation errors caused by the syntax of the field access could occur.

The type of INVOCANT->{FIELD_NAME} must be an object type, otherwise a compilation error occurs.

Examples:

# Exmaples of the isweak operator
my $isweak = isweak $object->{point};

Copyright & License

MIT License

To install SPVM, copy and paste the appropriate command in to your terminal.

cpanm

cpanm SPVM

CPAN shell

perl -MCPAN -e shell
install SPVM

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

Name

Description

Operators

Numeric Operators

Unary Plus Operator

Unary Minus Operator

Addition Operator

Subtraction Operator

Multiplication Operator

Division Operator

Division Unsigned Int Operator

Division Unsigned Long Operator

Modulo Operator

Modulo Unsigned Int Operator

Modulo Unsigned Long Operator

Increment Operators

Pre-Increment Operator

Post-Increment Operator

Decrement Operators

Pre-Decrement Operator

Post-Decrement Operator

Bitwise Operators

Bitwise AND Operator

Bitwise OR Operator

Bitwise NOT Operator

Shift Operators

Left Shift Operator

Arithmetic Right Shift Operator

Logical Right Shift Operator

Logical Operator

Logical AND Operator

Logical OR Operator

Logical NOT Operator

Array Length Operator

scalar Operator

Sequential Operator

Comparison Operators

Numeric Comparison Operators

String Comparison Operators

Constant Operator

length Operator

String Concatenation Operator

new_string_len Operator

make_read_only Operator

is_read_only Operator

print Operator

say Operator

warn Operator

__FILE__ Operator

__LINE__ Operator

__PACKAGE__ Operator

new Operator

Creating an Object

Creating an Array

Creating a Multi-Dimensional Array

Array Initialization

Key-Value Array Initialization

Anon Method Operator

undef Operator

copy Operator

dump Operator

Reference Operator

Dereference Operator

Assignment Operator

Special Assignment Operators

Getting and Setting Operators

Getting a Local Variable

Setting a Local Variable

Setting a Class Variable

Getting an Array Element

Setting an Array Element

Getting a Character

Setting a Character

Getting a Field

Setting a Field

Getting a Multi-Numeric Field

Setting a Multi-Numeric Field

Getting a Referenced Multi-Numeric Field

Setting a Referenced Multi-Numeric Field

Getting a Referenced Value

FILE Operator

LINE Operator

PACKAGE Operator