NAME

XML::Checker - A perl module for validating XML

SYNOPSIS

XML::Checker::Parser - an XML::Parser that validates at parse time

XML::DOM::ValParser - an XML::DOM::Parser that validates at parse time

(Some of the package names may change! This is only an alpha release...)

DESCRIPTION

XML::Checker can be used in different ways to validate XML. See the manual pages of XML::Checker::Parser and XML::DOM::ValParser for more information.

This document only describes common topics like error handling and the XML::Checker class itself.

WARNING: Not all errors are currently checked. Almost everything is subject to change. Some reported errors may not be real errors.

ERROR HANDLING

Whenever XML::Checker (or one of the packages that uses XML::Checker) detects a potential error, the 'fail handler' is called. It is currently also called to report information, like how many times an Entity was referenced. (The whole error handling mechanism is subject to change, I'm afraid...)

The default fail handler is XML::Checker::print_error(), which prints an error message to STDERR. It does not stop the XML::Checker, so it will continue looking for other errors. The error message is created with XML::Checker::error_string().

You can define your own fail handler in two ways, locally and globally. Use a local variable to temporarily override the fail handler. This way the default fail handler is restored when the local variable goes out of scope, esp. when exceptions are thrown e.g.

# Using a local variable to temporarily override the fail handler (preferred)
{ # new block - start of local scope
  local $XML::Checker::FAIL = \&my_fail;
  ... your code here ...
} # end of block - the previous fail handler is restored

You can also set the error handler globally, risking that your code may not be reusable or may clash with other modules that use XML::Checker.

# Globally setting the fail handler (not recommended)
$XML::Checker::FAIL = \&my_fail;
... rest of your code ...

The fail handler is called with the following parameters ($code, $msg, @context), where $code is the error code, $msg is the error description and @context contains information on where the error occurred. The @context is a (ordered) list of (key,value) pairs and can easily be turned into a hash. It contains the following information:

Element - tag name of Element node (if applicable)
Attr - attribute name (if applicable)
ChildElementIndex - if applicable (see error 157)
line - only when parsing
column - only when parsing
byte - only when parsing (-1 means: end of file)

Some examples of fail handlers:

# Don't print info messages
sub my_fail
{
    my $code = shift;
    print STDERR XML::Checker::error_message ($code, @_)
        if $code < 300;
}

# Die when the first error is encountered - this will stop
# the parsing process. Ignore information messages.
sub my_fail
{
    my $code = shift;
    die XML::Checker::error_message ($code, @_) if $code < 300;
}

# Count the number of undefined NOTATION references
# and print the error as usual
sub my_fail
{
    my $code = shift;
    $count_undef_notations++ if $code == 100;
    XML::Checker::print_error ($code, @_);
}

# Die when an error is encountered.
# Don't die if a warning or info message is encountered, just print a message.
sub my_fail {
    my $code = shift;
    die XML::Checker::error_string ($code, @_) if $code < 200;
    XML::Checker::print_error ($code, @_);
}

INSIGNIFICANT WHITESPACE

XML::Checker keeps track of whether whitespace found in character data is significant or not. It is considered insignicant if it is found inside an element that has a ELEMENT rule that is not of type Mixed or of type ANY. (A Mixed ELEMENT rule does contains the #PCDATA keyword. An ANY rule contains the ANY keyword. See the XML spec for more info.)

XML::Checker can not determine whether whitespace is insignificant in those two cases, because they both allow regular character data to appear within XML elements and XML::Checker can therefore not deduce whether whitespace is part of the actual data or was just added for readability of the XML file.

XML::Checker::Parser and XML::DOM::ValParser both have the option to skip insignificant whitespace when setting SkipInsignifWS to 1 in their constructor. If set, they will not call the Char handler when insignificant whitespace is encountered. This means that in XML::DOM::ValParser no Text nodes are created for insignificant whitespace.

Regardless of whether the SkipInsignifWS options is set, XML::Checker always keeps track of whether whitespace is insignificant. After making a call to XML::Checker's Char handler, you can find out if it was insignificant whitespace by calling the isInsignifWS method.

When using multiple (nested) XML::Checker instances or when using XML::Checker without using XML::Checker::Parser or XML::DOM::ValParser (which hardly anybody probably will), make sure to set a local variable in the scope of your checking code, e.g.

{ # new block - start of local scope
  local $XML::Checker::INSIGNIF_WS = 0;
  ... insert your code here ...
} # end of scope

ERROR CODES

There are 3 categories, errors, warnings and info messages. (The codes are still subject to change, as well the error descriptions.)

Most errors have a link to the appropriate Validaty Constraint (VC) or other section in the XML specification.

ERROR Messages

100 - 109

100 - undefined NOTATION [$notation] in ATTLIST

The ATTLIST contained a Notation reference that was not defined in a NOTATION definition. VC: Notation Attributes
101 - undefined ELEMENT [$tagName]

The specified Element was never defined in an ELEMENT definition. This is not an error according to the XML spec. See Element Type Declarations
102 - undefined unparsed ENTITY [$entity]

The attribute value referenced an undefined unparsed entity. VC: Entity Name
103 - undefined attribute [$attrName]

The specified attribute was not defined in an ATTLIST for that Element. VC: Attribute Value Type

110 - 119

110 - attribute [$attrName] of element [$tagName] already defined

The specified attribute was already defined in this ATTLIST definition or in a previous one. This is not an error according to the XML spec. See Attribute-List Declarations
111 - ID [$value] already defined

An ID with the specified value was already defined in an attribute within the same document. VC: ID
112 - unparsed ENTITY [$entity] already defined

This is not an error according to the XML spec. See Entity Declarations
113 - NOTATION [$notation] already defined
114 - ENTITY [$entity] already defined

This is not an error according to the XML spec. See Entity Declarations
115 - ELEMENT [$name] already defined VC: Unique Element Type Declaration

120 - 129

120 - invalid default ENTITY [$default]

(Or IDREF or NMTOKEN instead of ENTITY.) The ENTITY, IDREF or NMTOKEN reference in the default attribute value for an attribute with types ENTITY, IDREF or NMTOKEN was not valid. VC: Attribute Default Legal
121 - invalid default [$token] in ENTITIES [$default]

(Or IDREFS or NMTOKENS instead of ENTITIES) One of the ENTITY, IDREF or NMTOKEN references in the default attribute value for an attribute with types ENTITIES, IDREFS or NMTOKENS was not valid. VC: Attribute Default Legal
122 - invalid default attribute value [$default]

The specified default attribute value is not a valid attribute value. VC: Attribute Default Legal
123 - invalid default ID [$default], must be #REQUIRED or #IMPLIED

The default attribute value for an attribute of type ID has to be #REQUIRED or #IMPLIED. VC: ID Attribute Default
124 - bad model [$model] for ELEMENT [$name]

The model in the ELEMENT definition did not conform to the XML syntax for Mixed models. See Mixed Content

130 - 139

130 - invalid NMTOKEN [$attrValue]

The attribute value is not a valid NmToken token. VC: Enumeration
131 - invalid ID [$attrValue]

The specified attribute value is not a valid Name token. VC: ID
132 - invalid IDREF [$value]

The specified attribute value is not a valid Name token. VC: IDREF
133 - invalid ENTITY name [$name]

The specified attribute value is not a valid Name token. VC: Entity Name
134 - invalid Enumeration value [$value] in ATTLIST

The specified value is not a valid NmToken (see XML spec for def.) See definition of NmToken
135 - empty NOTATION list in ATTLIST

The NOTATION list of the ATTLIST definition did not contain any NOTATION references. See definition of NotationType
136 - empty Enumeration list in ATTLIST

The ATTLIST definition of the attribute of type Enumeration did not contain any values. See definition of Enumeration
137 - invalid ATTLIST type [$type]

The attribute type has to be one of: ID, IDREF, IDREFS, ENTITY, ENTITIES, NMTOKEN, NMTOKENS, CDATA, NOTATION or an Enumeration. See definition of AttType

150 - 159

150 - bad #FIXED attribute value [$value], it should be [$default]

The specified attribute was defined as #FIXED in the ATTLIST definition and the found attribute $value differs from the specified $default value. VC: Fixed Attribute Default
151 - only one ID allowed in ATTLIST per element first=[$attrName]

The ATTLIST definitions for an Element may contain only one attribute with the type ID. The specified $attrName is the one that was found first. VC: One ID per Element Type
152 - Element should be EMPTY, found Element [$tagName]

The ELEMENT definition for the specified Element said it should be EMPTY, but a child Element was found. VC: Element Valid (sub1)
153 - Element should be EMPTY, found text [$text]

The ELEMENT definition for the specified Element said it should be EMPTY, but text was found. Currently, whitespace is not allowed between the open and close tag. (This may be wrong, please give feedback.) To allow whitespace (subject to change), set:
```
$XML::Checker::Context::EMPTY::ALLOW_WHITE_SPACE = 1;
```
VC: Element Valid (sub1)
154 - bad order of Elements Found=[$found] RE=[$re]

The child elements of the specified Element did not match the regular expression found in the ELEMENT definition. $found contains a comma separated list of all the child element tag names that were found. $re contains the (decoded) regular expression that was used internally. VC: Element Valid
155 - more than one root Element [$tags]

An XML Document may only contain one Element. $tags is a comma separated list of element tag names encountered sofar. XML::Parser (expat) throws 'no element found' exception. See two_roots.xml for an example. See definition of document
156 - unexpected root Element [$tagName], expected [$rootTagName]

The tag name of the root Element of the XML Document differs from the name specified in the DOCTYPE section. XML::Parser (expat) throws 'not well-formed' exception. See bad_root.xml for an example. VC: Root Element Type
157 - unexpected Element [$tagName]

The ELEMENT definition for the specified Element does not allow child Elements with the specified $tagName. VC: Element Valid

The error context contains ChildElementIndex which is the index within its parent Element (counting only Element nodes.)
158 - unspecified value for #IMPLIED attribute [$attrName]

The ATTLIST for the specified attribute said the attribute was #IMPLIED, which means the user application should supply a value, but the attribute value was not specified. (User applications should pass a value and set $specified to 1 in the Attr handler.)
159 - unspecified value for #REQUIRED attribute [$attrName]

The ATTLIST for the specified attribute said the attribute was #REQUIRED, which means that a value should have been specified. VC: Required Attribute

160 - 169

160 - invalid Enumeration value [$attrValue]

The specified attribute value does not match one of the Enumeration values in the ATTLIST. VC: Enumeration
161 - invalid NOTATION value [$attrValue]

The specifed attribute value was not found in the list of possible NOTATION references as found in the ATTLIST definition. VC: Notation Attributes
162 - undefined NOTATION [$attrValue]

The NOTATION referenced by the specified attribute value was not defined. VC: Notation Attributes

WARNING Messages (200 and up)

200 - undefined ID [$id] was referenced [$n] times

The specified ID was referenced $n times, but never defined in an attribute value with type ID. VC: IDREF

INFO Messages (300 and up)

300 - [$n] references to ID [$id]

The specified ID was referenced $n times.

Not checked

The following errors are already checked by XML::Parser (expat) and are currently not checked by XML::Checker:

(?? TODO - add more info)

root element is missing: XML::Parser (expat) throws 'no element found' exception. See no_root.xml for an example.

XML::Checker

XML::Checker can be easily plugged into your application. It uses mostly the same style of event handlers (or callbacks) as XML::Parser. See XML::Parser manual page for descriptions of most handlers.

It also implements PerlSAX style event handlers. See "PerlSAX interface".

Currently, the XML::Checker object is a blessed hash with the following (potentially useful) entries:

$checker->{RootElement} - root element name as found in the DOCTYPE
$checker->{NOTATION}->{$notation} - is 1 if the NOTATION was defined
$checker->{ENTITY}->{$name} - contains the (first) ENTITY value if defined
$checker->{Unparsed}->{$entity} - is 1 if the unparsed ENTITY was defined
$checker->{ID}->{$id} - is 1 if the ID was defined
$checker->{IDREF}->{$id} - number of times the ID was referenced

# Less useful:
$checker->{ERule}->{$tag} - the ELEMENT rules by Element tag name
$checker->{ARule}->{$tag} - the ATTLIST rules by Element tag name
$checker->{Context} - context stack used internally
$checker->{CurrARule} - current ATTLIST rule for the current Element

XML:Checker methods

This section is only interesting when using XML::Checker directly. XML::Checker supports most event handlers that XML::Parser supports with minor differences. Note that the XML::Checker event handler methods are instance methods and not static, so don't forget to call them like this, without passing $expat (as in the XML::Parser) handlers:

$checker->Start($tagName);

Constructor

$checker = new XML::Checker;
$checker = new XML::Checker (%user_args);

User data may be stored by client applications. Only $checker->{User} is guaranteed not to clash with internal hash keys.

getRootElement ()

$tagName = $checker->getRootElement;

Returns the root element name as found in the DOCTYPE

Expat interface

XML::Checker supports what I call the Expat interface, which is the collection of methods you normally specify as the callback handlers when using XML::Parser.

Only the following XML::Parser handlers are currently supported: Init, Final, Char, Start, End, Element, Attlist, Doctype, Unparsed, Entity, Notation.

I don't know how to correctly support the Default handler for all XML::Parser releases. The Start handler works a little different (see below) and I added Attr, InitDomElem, FinalDomElem, CDATA and EntityRef handlers. See XML::Parser for a description of the handlers that are not listed below.

Note that this interface may disappear, when the PerlSAX interface stabilizes.

Start ($tag)

$checker->Start($tag);

Call this when an Element with the specified $tag name is encountered. Different from the Start handler in XML::Parser, in that no attributes are passed in (use the Attr handler for those.)

Attr ($tag, $attrName, $attrValue, $isSpecified)

$checker->Attr($tag,$attrName,$attrValue,$spec);

Checks an attribute with the specified $attrName and $attrValue against the ATTLIST definition of the element with the specified $tag name. $isSpecified means whether the attribute was specified (1) or defaulted (0).

EndAttr ()

$checker->EndAttr;

This should be called after all attributes are passed with Attr(). It will check which of the #REQUIRED attributes were not specified and generate the appropriate error (159) for each one that is missing.

CDATA ($text)

$checker->CDATA($text);

This should be called whenever CDATASections are encountered. Similar to Char handler (but might perform different checks later...)

EntityRef ($entity, $isParameterEntity)

$checker->EntityRef($entity,$isParameterEntity);

Checks the ENTITY reference. Set $isParameterEntity to 1 for entity references that start with '%'.

InitDomElem () and FinalDomElem ()

Used by XML::DOM::Element::check() to initialize (and cleanup) the context stack when checking a single element.

PerlSAX interface

XML::Checker now also supports the PerlSAX interface, so you can use XML::Checker wherever you use PerlSAX handlers.

XML::Checker implements the following methods: start_document, end_document, start_element, end_element, characters, processing_instruction, comment, start_cdata, end_cdata, entity_reference, notation_decl, unparsed_entity_decl, entity_decl, element_decl, attlist_decl, doctype_decl, xml_decl

Not implemented: set_document_locator, ignorable_whitespace

See PerlSAX.pod for details. (It is called lib/PerlSAX.pod in the libxml-perl distribution which can be found at CPAN.)

CAVEATS

This is an alpha release. Almost everything is subject to change.

AUTHOR

Send bug reports, hints, tips, suggestions to Enno Derksen at <enno@att.com>.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)