NAME
Config::Model::models::LCDd::MtxOrb - Configuration class LCDd::MtxOrb
DESCRIPTION
Configuration classes used by Config::Model
generated from LCDd.conf
Elements
Brightness
Set the initial brightness Optional. Type integer.
Contrast
Set the initial contrast NOTE: The driver will ignore this if the display is a vfd or vkd as they don't have this feature. Optional. Type uniline.
Device
Select the output device to use Optional. Type uniline.
KeyMap_A
The following table translates from MtxOrb key letters to logical key names. By default no keys are mapped, meaning the keypad is not used at all. Optional. Type uniline.
KeyMap_B
Optional. Type uniline.
KeyMap_C
Optional. Type uniline.
KeyMap_D
Optional. Type uniline.
KeyMap_E
Optional. Type uniline.
KeyMap_F
Optional. Type uniline.
OffBrightness
Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type integer.
Size
Set the display size Optional. Type uniline.
Speed
Set the communication speed Optional. Type enum. choice: '1200', '2400', '9600', '19200'.
Type
Set the display type Optional. Type enum. choice: 'lcd', 'lkd', 'vfd', 'vkd'.
hasAdjustableBacklight
Some old displays do not have an adjustable backlight but only can switch the backlight on/off. If you experience randomly appearing block characters, try setting this to false. Optional. Type boolean.
keypad_test_mode
See the [menu] section for an explanation of the key mappings You can find out which key of your display sends which character by setting keypad_test_mode to yes and running LCDd. LCDd will output all characters it receives. Afterwards you can modify the settings above and set keypad_set_mode to no again. Optional. Type uniline.