/ 
Cisco-Reconfig-0.912
River stage zero No dependents
/ Cisco::Reconfig

NAME

Cisco::Reconfig - Parse and generate Cisco configuration files

SYNOPSIS

use Cisco::Reconfig;
my $config = readconfig("/my/cisco/config");

use Cisco::Reconfig qw(stringconfig);
my $config = stringconfig("cisco config", "goes here");

DESCRIPTION

Cisco::Reconfig makes it easier to write programs to generate changes to Cisco configuration files.

Cisco::Reconfig is a module that parses Cisco router configuration files. It doesn't have any real understanding of Cisco configurations so it might be useful for other similar configuration languages. It knows that nesting is shown by indentation. It knows that ! means a comment. It knows that no may proceed a line without changing where that line exists in the hierarchy. It doesn't know much else.

Cisco::Reconfig can be used to modify configurations. The set() method will check the current configruation and return commands to change it if it is other than what is wanted (as passed to the set() method).

DETAILS

Some of the accessor methods return a special "undef" object instead of a proper undef. This is so that code that uses accessors doesn't have to be paranoid about undefined values. This "undef" object tests as false in boolean context however it is defined()ed.

Methods that return configuration items can return items that represent any particular word in the configruation file. For example, with the following configuration & code, the return value for the get() method would represent the word access-list in both of the lines:

ip as-path access-list 111 deny _10993_
ip as-path access-list 111 permit .*

$config->get('ip as-path access-list');

Most of the time you don't need to worry about the fact that the object represents a word. Another way to look at it is that the object represents a selection of lines from the configuration file. Sometimes that selection is a single line. Sometimes it is a block. Sometimes it is a few lines that start with the same tokens.

To look at all the different as-path access lists, the following would work:

$config->get('ip as-path access-list')->all;

The word no is handled specially: it is discarded. Many cisco directives start with the word no. To make the module more usable, the word no is ignored during parsing. It is kept in the text so, if you look for something that might have a no in front of it, you'll get a hit if the no is there or isn't there. For example:

my (@cdp_disabled);
for my $context ($config->get('interface')->all(qr{^ether}i)) {
	my $cdp = $context->get('cdp enable');
	push(@cdp_disabled, $context)
		if $cdp =~ /no cdp enable/;
}

FUNCTIONS

There is just one function provided: readconfig(). Readconfig takes a single argument: a filename or file handle. It parses the file and returns an Cisco::Reconfig object.

MAIN METHODS

->get(@designators)

The get() method is the key to looking up items in a configuration file. It takes an array of designators as an argument. A designator is simply something that identifies a portion of a configuration file. For example ('interface') is a designator for all the interfaces and ('ip route') is a designator for all the static routes.

When multiple designators are specified, they are used for nested configuration items. For example, ('router bgp', 'neighbor') would be a designator for all the BGP neighbors. This assumes that there is only one router bgp defined.

In array context, get() will follow multiple paths to find configuration items that match the specification. For example ('interface', 'ip address') would return a list of ip address items across multiple interfaces.

Designators must exactly match words in the configuration. You may not abbr anythng.

->set(@designators, $newvalue)

The set() method will generate Cisco configuration snippets that will modify the configuration of an item. For example, the following code:

my $ser0 = $config->get('interface Serial0');
print $ser0->set('ip address', 
	'ip address 207.181.198.194 255.255.255.252');

Will print:

interface Serial0
 ip address 207.181.198.194 255.255.255.252
exit

If the configuration already matches the $newvalue then nothing would be printed.

The designator(s) say what will be modified. This should either be represent a line or an entire block. When multiple designators are needed, pass them as an anonymous array. The above example could also have been written as:

print $config->set('interface Serial0', 'ip address',
	'ip address 207.181.198.194 255.255.255.252');

If no designators are needed, don't pass any. The following is nearly the same as the preceeding;

my $ipaddr = $config->get('interface Serial0', 'ip address');
print $ipaddr->set( 'ip address 207.181.198.194 255.255.255.252');

When providing code snippets to set(), indent blocks just like Ciscos do when they display their configuration. For example, the following:

print $config->set("ip access-list extended all-addresses", <<END);
	ip access-list extended all-addresses
	 permit ip any any
	!
END

Will print the following if the access list ins't already set as listed:

ip access-list extended all-addresses
 permit ip any any
exit

When modifying a block, include the configruation line that starts the block in the replacement text. For example, when setting an entire interface, provide the entire block:

print $config->set('interface Serial0',<<END);
	interface Serial0 point-to-point
	 ip address 219.22.221.3 255.255.255.252
	 bandwidth 3022
	!
END
->all($regex)

The all() method can be used to expand and select configuration items.

For example, to make sure that all loopback interfaces use a netmask of 255.255.255.255, use the following:

for my $loop ($config->get('interface')->all(qr{^Loop})) {
	my $ip = $loop->get('ip address');
	next unless $ip->text =~ /\A\s*ip address (\S+) \S+\s*\Z/;
	print $ip->set(undef, "ip address $1 255.255.255.255");
}

The $regex paramater is optional.

ACCESSOR METHODS

->single()

Cisco::Reconfig objects may represent any word in a configruation file. For example the word "address" in the following is represented by an object that would be returned by the code that follows.

interface Loopback0 
 ip access-group 151 in
 ip address 218.28.41.38 255.255.255.255
!

my $address_word = $config->get('interface Loopback0', 'ip')
	->all(qr{^address});

single() answers the question: does this Cisco::Reconfig object uniquely specify a single point in the configuration? In the example above, the object for word ip (above) does not but the object for the word address does.

single() returns an object (representing the last word on the line) or undef.

->zoom()

zoom() is the same as to single() except that it will always return a valid Cisco::Reconfig object.

->endpt()

Returns an Cisco::Reconfig object representing the last word on a configuration line that could follow from the current ZYZ object. When there are multiple possibilities the object picked is nearly random.

->next()

next() returns an Cisco::Reconfig object representing the last word on the suceeding line of the current configuration block.

When used at the beginning of a block, it returns the last word of the first line in the block.

->context()

Returns the configuration object that represents the surounding context.

# returns the "undefined" object
$config->context 

# returns $config
$config->get('interface Loopback0')->context 

# returns $config->get('interface Loopback0')
$config->get('interface Loopback0', 'ip address')->context

context() always returns a configuration object.

->subs()

For Cisco::Reconfig objects that represent a word in a line that introduces a block of configuration items (such as most interface lines), the subs() function returns an Cisco::Reconfig object that represents the contents of the block.

If the Cisco::Reconfig object in question does not represent the start of a configuration block, the "undefined" object is returned.

->kids()

For Cisco::Reconfig objects that do not uniquely specify a single line (ie: ! -single()>), the ->kids() method will return an array of objects representing the possible following words.

If there is only one possibility, that one possibility is returned.

If the Cisco::Reconfig object represents the last word on a configuration line then that word is returned.

MISCELLANEOUS METHODS

->text()

Returns the text from the original configuration file (in original order) of all of the lines that could follow from the current Cisco::Reconfig object.

When the invoking Cisco::Reconfig object represents a single line text() returns that line. When the invoking Cisco::Reconfig object represents a block text() returns the entire block. When the Cisco::Reconfig object represents a word with multiple possible completions, text() returns all the completions.

->alltext()

Returns the text from the original configuration file of all the lines that could follow from the current Cisco::Reconfig object and all lines that are introduced by the current object.

To get the text of all interface definitions in their entirety, use;

$config->get('interface')->alltext
->setcontext()

Returns an array of configuration lines that define the block surrounding the invoking object.

->unsetcontext()

Returns an array of the word exit repeated as many times as nessasary to undo a setcontext().

->block()

Returns true if the object represents a whole configuration block.

TWEAKS

Some cisco configurations have a minus one indent beginning with the class keyword. This exception is matched and handled. To change the regex for what is accepted for a minus-one indent, override $Cisco::Reconfig::allow_minus_one_indent to a new regex. Set to undef to disable this override.

Some cisco configurations have a plus one indent beginning with the service-index keyword. This exception is matched and handled. To change the regex for what is accepted for a plus-one indent, override $Cisco::Reconfig::allow_plus_one_indent to a new regex. Set to undef to disable this override.

If you encounter other broken indents, please let the maintiner know. If it can be handled with the above overrides, do so. If it cannot, you can change $Cisco::Reconfig::bad_indent_policy to WARN or IGNORE. The default behavior is to die.

OVERLOADING

Two operators are overloaded: boolean tests and stringification. Cisco::Reconfig objects booleanify as true if they are the special undefined objects. Cisco::Reconfig objects stringify as their text lines.

CAVEATS

Since Cisco::Reconfig doesn't really understand Cisco configuration files it can't know things that you might think it should.

For example, it doesn't know that interface Serial0 is the same as int ser 0 nor even interface Serial 0. Be very careful about where Cisco's actually put spaces and where they don't.

No attempt has been made to make this module particularly fast or efficient for the computer.

Cisco::Reconfig objects don't automatically garbage collect themselves because they are highly self-referrential.

LICENSE

Copyright (C) 2002-2010 David Muir Sharnoff <cpan@dave.sharnoff.org> Copyright (C) 2011-2012 Google, Inc. This module may be licensed on the same terms as Perl itself.